arXiv subjects

R. Guerrero

Publications and source records attributed to R. Guerrero.

12 recordsLinked to original sources

arXiv2020

Direct determination of Spin-Orbit torque by using dc current-voltage characteristics

Spin polarized currents are employed to efficiently manipulate the magnetization of ferromagnetic ultrathin films by exerting a torque on it. If the spin currents are generated by means of the spin-orbit interaction between a ferromagnetic and a non-magnetic layer, the effect is known as spin-orbit torque (SOT), and is quantified by measuring the effective fields produced by a charge current injected into the device. In this work, we present a new experimental technique to quantify directly the SOT based on the measurement of non-linearities of the dc current-voltage (IV) characteristics in Hall bar devices employing a simple instrumentation. Through the analysis of the IV curves, the technique provides directly the linearity of the effective fields with current, the detection of the current range in which the thermal effects can be relevant, the appearance of misalignments artefacts when the symmetry relations of SOT are not fulfilled, and the conditions for the validity of the single domain approximations, which are not considered in switching current and second harmonic generation state-of-the-art experiments. We have studied the SOT induced antidamping and field-like torques in Ta/Co/Pt asymmetric stacks with perpendicular magnetic anisotropy.

cond-mat.mes-hall↗

arXiv2020

Experimental evidence of spin-orbit torque from metallic interfaces

Spin currents can modify the magnetic state of ferromagnetic ultrathin films through spin-orbit torque. They may be generated by means of spin-orbit interaction by either bulk or interfacial phenomena. Electrical transport measurements reveal a six-fold increase of the spin-orbit torque accompanied by a drastic reduction of the spin Hall magnetoresistance upon the introduction of a Cu interlayer in a Pt/Cu/Co/Pt structure with perpendicular magnetic anisotropy. We analyze the dependence of the spin Hall magnetoresistance with the thickness of the interlayer in the frame of a drift diffusion model that provides information on the expected spin currents and spin accumulations in the system. The results demonstrate that the major responsible of both effects is spin memory loss at the interface. The enhancement of the spin-orbit torque when introducing an interlayer opens the possibility to design more effient spintronic devices based on materials that are cheap and abundant such as copper.

cond-mat.mes-hall↗

arXiv2018

White matter hyperintensity and stroke lesion segmentation and differentiation using convolutional neural networks

The accurate assessment of White matter hyperintensities (WMH) burden is of crucial importance for epidemiological studies to determine association between WMHs, cognitive and clinical data. The manual delineation of WMHs is tedious, costly and time consuming. This is further complicated by the fact that other pathological features (i.e. stroke lesions) often also appear as hyperintense. Several automated methods aiming to tackle the challenges of WMH segmentation have been proposed, however cannot differentiate between WMH and strokes. Other methods, capable of distinguishing between different pathologies in brain MRI, are not designed with simultaneous WMH and stroke segmentation in mind. In this work we propose to use a convolutional neural network (CNN) that is able to segment hyperintensities and differentiate between WMHs and stroke lesions. Specifically, we aim to distinguish between WMH pathologies from those caused by stroke lesions due to either cortical, large or small subcortical infarcts. As far as we know, this is the first time such differentiation task has explicitly been proposed. The proposed fully convolutional CNN architecture, is comprised of an analysis path, that gradually learns low and high level features, followed by a synthesis path, that gradually combines and up-samples the low and high level features into a class likelihood semantic segmentation. Quantitatively, the proposed CNN architecture is shown to outperform other well established and state-of-the-art algorithms in terms of overlap with manual expert annotations. Clinically, the extracted WMH volumes were found to correlate better with the Fazekas visual rating score. Additionally, a comparison of the associations found between clinical risk-factors and the WMH volumes generated by the proposed method, were found to be in line with the associations found with the expert-annotated volumes.

q-bio.TO↗

arXiv2017

Interfacial exchange coupling induced chiral symmetry-breaking of Spin-Orbit effects

We demonstrate that the interfacial exchange coupling in ferromagnetic/antiferromagnetic (FM/AFM) systems induces symmetry-breaking of the Spin-Orbit (SO) effects. This has been done by studying the field and angle dependencies of anisotropic magnetoresistance and vectorialresolved magnetization hysteresis loops, measured simultaneously and reproduced with numerical simulations. We show how the induced unidirectional magnetic anisotropy at the FM/AFM interface results in strong asymmetric transport behaviors, which are chiral around the magnetization hard-axis direction. Similar asymmetric features are anticipated in other SO-driven phenomena.

cond-mat.mtrl-sci↗

arXiv2012

Very strong reduction of 1/f noise by Carbon doping in epitaxial Fe/MgO(100)12ML/Fe magnetic tunnel junctions with large density of barrier defects

We report on the strong influence of Carbon doping on 1/f noise in fully epitaxial Fe/MgO(100)12ML/Fe magnetic tunnel junctions in comparison with undoped junctions with a large density of barrier defects. Carbon influences the relaxation of defects, the reconstruction of the interface and the symmetry transformation of interface resonance states, which are suggested to contribute to the strong reduction of the 1/f noise. Our study demonstrates that doping with light elements could be a versatile tool to improve the electron transport and noise in epitaxial magnetic tunnel junctions with large density of barrier defects.

cond-mat.mtrl-sci↗

arXiv2010

Conductance in Co/Al2O3/Si/Al2O3 permalloy with asymmetrically doped barrier

Permalloy magnetic tunnel junctions. Complementary low frequency noise measurements are used to understand the conductance results. The obtained data indicate the breakdown of the Coulomb blockade for thickness of the asymmetric silicon layer exceeding 1.2Å. The crossover in the conductance, the dependence of the tunnelling magnetoresistance with the bias voltage and the noise below 80K correspond to 1 monolayer coverage. Interestingly, the zero bias magnetoresistance remains nearly unaffected by the presence of the silicon layer. The proposed model uses Larkin-Matveev approximation of tunnelling through a single impurity layer generalized to 3D and takes into account the variation of the barrier shape with the bias voltage. The main difference is the localization of all the impurity levels within a single atomic layer. In the high thickness case, up to 1.8Å, we have introduced a phenomenological parameter, which reflects the number of single levels on the total density of silicon atoms.

cond-mat.other↗

arXiv2008

Current-induced domain-wall motion in synthetic antiferromagnets

Domain-wall magnetoresistance and low-frequency noise have been studied in epitaxial antiferromagnetically-coupled [Fe/Cr(001)]_10 multilayers and ferromagnetic Co line structures as a function of DC current intensity. In [Fe/Cr(001)]_10 multilayers a transition from excess to suppressed domain-wall induced 1/f noise above current densities of j_c ~ 2*10^5 A/cm^2 has been observed. In ferromagnetic Co line structures the domain wall related noise remains qualitatively unchanged up to current densities exceeding 10^6A/cm^2. Theoretical estimates of the critical current density for a synthetic Fe/Cr antiferromagnet suggest that this effect may be attributed to current-induced domain-wall motion that occurs via spin transfer torques.

cond-mat.mtrl-sci↗

arXiv2008

Very low 1/f noise at room temperature in fully epitaxial Fe/MgO/Fe magnetic tunnel junctions

We report on room temperature 1/f noise in fully epitaxial Fe(45nm)/MgO(2.6nm)/Fe(10nm) magnetic tunnel junctions (MTJs) with and without carbon doping of the Fe/MgO bottom interface. We have found that the normalized noise (Hooge factor) asymmetry between parallel and antiparallel states may strongly depend on the applied bias and its polarity. Both types of MTJs exhibit record low Hooge factors being at least one order of magnitude smaller than previously reported.

cond-mat.mes-hall↗

arXiv2008

High Bias Voltage Effect on Spin-Dependent Conductivity and Shot Noise in Carbon-doped Fe(001)/MgO(001)/Fe(001) Magnetic Tunnel Junctions

Low temperature (10K) high voltage bias dynamic conductivity (up to 2.7V) and shot noise (up to 1V) were studied in epitaxial Fe(100)/Fe-C/MgO(100)/Fe(100) magnetic tunnel junctions, as a function of the magnetic state. The junctions show large tunnel magnetoresistance (185% at 300K and 330% at 4K). Multiple sign inversion of the magnetoresistance is observed for bias polarity when the electrons scan the electronic structure of the bottom Fe-C interface. The shot-noise shows a Poissonian character. This demonstrates a pure spin dependent direct tunneling mechanism and validates the high structural quality of the MgO barrier.

cond-mat.mes-hall↗

arXiv2007

Shot Noise in Magnetic Tunnel Junctions: Evidence for Sequential Tunneling

We report the experimental observation of sub-Poissonian shot noise in single magnetic tunnel junctions, indicating the importance of tunneling via impurity levels inside the tunnel barrier. For junctions with weak zero-bias anomaly in conductance, the Fano factor (normalized shot noise) depends on the magnetic configuration being enhanced for antiparallel alignment of the ferromagnetic electrodes. We propose a model of sequential tunneling through nonmagnetic and paramagnetic impurity levels inside the tunnel barrier to qualitatively explain the observations.

cond-mat.mes-hall↗

arXiv2006

Monte Carlo simulation of the electron transport through thin slabs: A comparative study of PENELOPE, GEANT3, GEANT4, EGSnrc and MCNPX

The Monte Carlo simulation of the electron transport through thin slabs is studied with five general purpose codes: PENELOPE, GEANT3, GEANT4, EGSnrc and MCNPX. The different material foils analyzed in the old experiments of Kulchitsky and Latyshev [Phys. Rev. 61 (1942) 254-266] and Hanson et al. [Phys. Rev. 84 (1951) 634-637] are used to perform the comparison between the Monte Carlo codes. Non-negligible differences are observed in the angular distributions of the transmitted electrons obtained with the some of the codes. The experimental data are reasonably well described by EGSnrc, PENELOPE (v. 2005) and GEANT4. A general good agreement is found for EGSnrc and GEANT4 in all the cases analyzed.

physics.med-ph↗

arXiv2006

Low-frequency noise and tunnelling magnetoresistance in Fe(110)/MgO(111)/Fe(110) epitaxial magnetic tunnel junctions

We report on tunnelling magnetoresistance (TMR), current-voltage (IV) characteristics and low frequency noise in epitaxially grown Fe(110)/MgO(111)/Fe(110) magnetic tunnel junctions (MTJs) with dimensions from 2x2 to 20x20 um2. The evaluated MgO energy barrier (0.50+/-0.08 eV), the barrier width (13.1+/-0.5 angstrom) as well as the resistance times area product (7+/-1 Mohmsum2) show relatively small variation, confirming a high quality epitaxy and uniformity of all MTJs studied. The noise power, though exhibiting large variation, was observed to be roughly anticorrelated with the TMR. Surprisingly, for the largest junctions we observed a strong enhancement of the normalized low-frequency noise in the antiparallel magnetic configuration. This behaviour could be related to an interplay between the magnetic state and the local barrier defects structure of the epitaxial MTJs

cond-mat.other↗