arXiv subjects

Rama K. Vasudevan

Publications and source records attributed to Rama K. Vasudevan.

At least 37 records · Page 2Linked to original sources

arXiv2023

Sub-10 nm Probing of Ferroelectricity in Heterogeneous Materials by Machine Learning Enabled Contact Kelvin Probe Force Microscopy

Reducing the dimensions of ferroelectric materials down to the nanoscale has strong implications on the ferroelectric polarization pattern and on the ability to switch the polarization. As the size of ferroelectric domains shrinks to nanometer scale, the heterogeneity of the polarization pattern becomes increasingly pronounced, enabling a large variety of possible polar textures in nanocrystalline and nanocomposite materials. Critical to the understanding of fundamental physics of such materials and hence their applications in electronic nanodevices, is the ability to investigate their ferroelectric polarization at the nanoscale in a non-destructive way. We show that contact Kelvin probe force microscopy (cKPFM) combined with a k-means response clustering algorithm enables to measure the ferroelectric response at a mapping resolution of 8 nm. In a BaTiO3 thin film on silicon composed of tetragonal and hexagonal nanocrystals, we determine a nanoscale lateral distribution of discrete ferroelectric response clusters, fully consistent with the nanostructure determined by transmission electron microscopy. Moreover, we apply this data clustering method to the cKPFM responses measured at different temperatures, which allows us to follow the corresponding change in polarization pattern as the Curie temperature is approached and across the phase transition. This work opens up perspectives for mapping complex ferroelectric polarization textures such as curled/swirled polar textures that can be stabilized in epitaxial heterostructures and more generally mapping the polar domain distribution of any spatially-highly-heterogeneous ferroelectric materials.

cond-mat.mtrl-sci↗

arXiv2023

Learning the right channel in multimodal imaging: automated experiment in Piezoresponse Force Microscopy

We report the development and experimental implementation of the automated experiment workflows for the identification of the best predictive channel for a phenomenon of interest in spectroscopic measurements. The approach is based on the combination of ensembled deep kernel learning for probabilistic predictions and a basic reinforcement learning policy for channel selection. It allows the identification of which of the available observational channels, sampled sequentially, are most predictive of selected behaviors, and hence have the strongest correlations. We implement this approach for multimodal imaging in Piezoresponse Force Microscopy (PFM), with the behaviors of interest manifesting in piezoresponse spectroscopy. We illustrate the best predictive channel for polarization-voltage hysteresis loop and frequency-voltage hysteresis loop areas is amplitude in the model samples. The same workflow and code are universal and applicable for any multimodal imaging and local characterization methods.

cond-mat.mtrl-sci↗

arXiv2023

Designing Workflows for Materials Characterization

Experimental science is enabled by the combination of synthesis, imaging, and functional characterization. Synthesis of a new material is typically followed by a set of characterization methods aiming to provide feedback for optimization or discover fundamental mechanisms. However, the sequence of synthesis and characterization methods and their interpretation, or research workflow, has traditionally been driven by human intuition and is highly domain specific. Here we explore concepts of scientific workflows that emerge at the interface between theory, characterization, and imaging. We discuss the criteria by which these workflows can be constructed for special cases of multi-resolution structural imaging and structural and functional characterization. Some considerations for theory-experiment workflows are provided. We further pose that the emergence of user facilities and cloud labs disrupt the classical progression from ideation, orchestration, and execution stages of workflow development and necessitate development of universal frameworks for workflow design, including universal hyper-languages describing laboratory operation, reward functions and their integration between domains, and policy development for workflow optimization. These tools will enable knowledge-based workflow optimization, enable lateral instrumental networks, sequential and parallel orchestration of characterization between dissimilar facilities, and empower distributed research.

cond-mat.mtrl-sci↗

arXiv2022

Exploring the microstructural origins of conductivity and hysteresis in metal halide perovskites via active learning driven automated scanning probe microscopy

Electronic transport and hysteresis in metal halide perovskites (MHPs) are key to the applications in photovoltaics, light emitting devices, and light and chemical sensors. These phenomena are strongly affected by the materials microstructure including grain boundaries, ferroic domain walls, and secondary phase inclusions. Here, we demonstrate an active machine learning framework for 'driving' an automated scanning probe microscope (SPM) to discover the microstructures responsible for specific aspects of transport behavior in MHPs. In our setup, the microscope can discover the microstructural elements that maximize the onset of conduction, hysteresis, or any other characteristic that can be derived from a set of current-voltage spectra. This approach opens new opportunities for exploring the origins of materials functionality in complex materials by SPM and can be integrated with other characterization techniques either before (prior knowledge) or after (identification of locations of interest for detail studies) functional probing.

cond-mat.mtrl-sci↗

arXiv2022

A roadmap for edge computing enabled automated multidimensional transmission electron microscopy

The advent of modern, high-speed electron detectors has made the collection of multidimensional hyperspectral transmission electron microscopy datasets, such as 4D-STEM, a routine. However, many microscopists find such experiments daunting since such datasets' analysis, collection, long-term storage, and networking remain challenging. Some common issues are the large and unwieldy size of the said datasets, often running into several gigabytes, non-standardized data analysis routines, and a lack of clarity about the computing and network resources needed to utilize the electron microscope fully. However, the existing computing and networking bottlenecks introduce significant penalties in each step of these experiments, and thus, real-time analysis-driven automated experimentation for multidimensional TEM is exceptionally challenging. One solution is integrating microscopy with edge computing, where moderately powerful computational hardware performs the preliminary analysis before handing off the heavier computation to HPC systems. In this perspective, we trace the roots of computation in modern electron microscopy, demonstrate deep learning experiments running on an edge system, and discuss the networking requirements for tying together microscopes, edge computers, and HPC systems.

cond-mat.mtrl-sci↗

arXiv2022

Automated Experiments of Local Non-linear Behavior in Ferroelectric Materials

We develop and implement an automated experiment in multimodal imaging to probe structural, chemical, and functional behaviors in complex materials and elucidate the dominant physical mechanisms that control device function. Here the emergence of non-linear electromechanical responses in piezoresponse force microscopy (PFM) is explored. Non-linear responses in PFM can originate from multiple mechanisms, including intrinsic material responses often controlled by domain structure, surface topography that affects the mechanical phenomena at the tip-surface junction, and, potentially, the presence of surface contaminants. Using an automated experiment to probe the origins of non-linear behavior in model ferroelectric lead titanate (PTO) and ferroelectric Al0.93B0.07N films, it was found that PTO showed asymmetric nonlinear behavior across a/c domain walls and a broadened high nonlinear response region around c/c domain walls. In contrast, for Al0.93B0.07N, well-poled regions showed high linear piezoelectric responses paired with low non-linear responses and regions that were multidomain indicated low linear responses and high nonlinear responses. We show that formulating dissimilar exploration strategies in deep kernel learning as alternative hypotheses allows for establishing the preponderant physical mechanisms behind the non-linear behaviors, suggesting that this approach automated experiments can potentially discern between competing physical mechanisms. This technique can also be extended to electron, probe, and chemical imaging.

cond-mat.mtrl-sci↗

arXiv2022

Bayesian Optimization in Continuous Spaces via Virtual Process Embeddings

Automated chemical synthesis, materials fabrication, and spectroscopic physical measurements often bring forth the challenge of process trajectory optimization, i.e., discovering the time dependence of temperature, electric field, or pressure that gives rise to optimal properties. Due to the high dimensionality of the corresponding vectors, these problems are not directly amenable to Bayesian Optimization (BO). Here we propose an approach based on the combination of the generative statistical models, specifically variational autoencoders, and Bayesian optimization. Here, the set of potential trajectories is formed based on best practices in the field, domain intuition, or human expertise. The variational autoencoder is used to encode the thus generated trajectories as a latent vector, and also allows for the generation of trajectories via sampling from latent space. In this manner, Bayesian Optimization of the process is realized in the latent space of the system, reducing the problem to a low-dimensional one. Here we apply this approach to a ferroelectric lattice model and demonstrate that this approach allows discovering the field trajectories that maximize curl in the system. The analysis of the corresponding polarization and curl distributions allows the relevant physical mechanisms to be decoded.

cond-mat.dis-nn↗

arXiv2022

Discovering mechanisms for materials microstructure optimization via reinforcement learning of a generative model

The design of materials structure for optimizing functional properties and potentially, the discovery of novel behaviors is a keystone problem in materials science. In many cases microstructural models underpinning materials functionality are available and well understood. However, optimization of average properties via microstructural engineering often leads to combinatorically intractable problems. Here, we explore the use of the reinforcement learning (RL) for microstructure optimization targeting the discovery of the physical mechanisms behind enhanced functionalities. We illustrate that RL can provide insights into the mechanisms driving properties of interest in a 2D discrete Landau ferroelectrics simulator. Intriguingly, we find that non-trivial phenomena emerge if the rewards are assigned to favor physically impossible tasks, which we illustrate through rewarding RL agents to rotate polarization vectors to energetically unfavorable positions. We further find that strategies to induce polarization curl can be non-intuitive, based on analysis of learned agent policies. This study suggests that RL is a promising machine learning method for material design optimization tasks, and for better understanding the dynamics of microstructural simulations.

cond-mat.mtrl-sci↗

arXiv2021

Experimental discovery of structure-property relationships in ferroelectric materials via active learning

Emergent functionalities of structural and topological defects in ferroelectric materials underpin an extremely broad spectrum of applications ranging from domain wall electronics to high dielectric and electromechanical responses. Many of these have been discovered and quantified via local scanning probe microscopy methods. However, the search for these functionalities has until now been based by either trial and error or using auxiliary information such as topography or domain wall structure to identify potential objects of interest based on the intuition of operator or preexisting hypotheses, with subsequent manual exploration. Here, we report the development and implementation of a machine learning framework that actively discovers relationships between local domain structure and polarization switching characteristics in ferroelectric materials encoded in the hysteresis loop. The latter and descriptors such as nucleation bias, coercive bias, hysteresis loop area, or more complex functionals of hysteresis loop shape and corresponding uncertainties are used to guide the discovery via automated piezoresponse force microscopy (PFM) and spectroscopy experiments. As such, this approach combines the power of machine learning methods to learn the correlative relationships between high dimensional data, and human-based physics insights encoded in the acquisition function. For ferroelectric, this automated workflow demonstrates that the discovery path and sampling points of on-field and off-field hysteresis loops are largely different, indicating the on-field and off-field hysteresis loops are dominated by different mechanisms. The proposed approach is universal and can be applied to a broad range of modern imaging and spectroscopy methods ranging from other scanning probe microscopy modalities to electron microscopy and chemical imaging.

cond-mat.mtrl-sci↗

arXiv2021

Towards Automating Structural Discovery in Scanning Transmission Electron Microscopy

Scanning transmission electron microscopy (STEM) is now the primary tool for exploring functional materials on the atomic level. Often, features of interest are highly localized in specific regions in the material, such as ferroelectric domain walls, extended defects, or second phase inclusions. Selecting regions to image for structural and chemical discovery via atomically resolved imaging has traditionally proceeded via human operators making semi-informed judgements on sampling locations and parameters. Recent efforts at automation for structural and physical discovery have pointed towards the use of "active learning" methods that utilize Bayesian optimization with surrogate models to quickly find relevant regions of interest. Yet despite the potential importance of this direction, there is a general lack of certainty in selecting relevant control algorithms and how to balance a priori knowledge of the material system with knowledge derived during experimentation. Here we address this gap by developing the automated experiment workflows with several combinations to both illustrate the effects of these choices and demonstrate the tradeoffs associated with each in terms of accuracy, robustness, and susceptibility to hyperparameters for structural discovery. We discuss possible methods to build descriptors using the raw image data and deep learning based semantic segmentation, as well as the implementation of variational autoencoder based representation. Furthermore, each workflow is applied to a range of feature sizes including NiO pillars within a La:SrMnO$_3$ matrix, ferroelectric domains in BiFeO$_3$, and topological defects in graphene. The code developed in this manuscript are open sourced and will be released at github.com/creangnc/AE_Workflows.

cond-mat.mtrl-sci↗

arXiv2021

Autonomous Experiments in Scanning Probe Microscopy and Spectroscopy: Choosing Where to Explore Polarization Dynamics in Ferroelectrics

Polarization dynamics in ferroelectric materials are explored via the automated experiment in Piezoresponse Force Spectroscopy. A Bayesian Optimization framework for imaging is developed and its performance for a variety of acquisition and pathfinding functions is explored using previously acquired data. The optimized algorithm is then deployed on an operational scanning probe microscope (SPM) for finding areas of large electromechanical response in a thin film of PbTiO3, with metrics showing gains of ~3x in the sampling efficiency. This approach opens the pathway to perform more complex spectroscopies in SPM that were previously not possible due to time constraints and sample stability, tip wear, and/or stochastic sample damage that occurs at specific, a priori unknown spatial positions. Potential improvements to the framework to enable the incorporation of more prior information and improve efficiency further are discussed.

cond-mat.dis-nn↗

arXiv2021

Exploring Electron Beam Induced Atomic Assembly via Reinforcement Learning in a Molecular Dynamics Environment

Atom-by-atom assembly of functional materials and devices is perceived as one of the ultimate targets of nanoscience and nanotechnology. While traditionally implemented via scanning probe microscopy techniques, recently it has been shown that the beam of a scanning transmission electron microscope can be used for targeted manipulation of individual atoms. However, the process is highly dynamic in nature and proceeds via a large number of weakly-understood individual steps. Hence, harnessing an electron beam towards atomic assembly requires automated methods to control the parameters and positioning of the beam in such a way as to fabricate atomic-scale structures reliably. Here, we create a molecular dynamics environment wherein individual atom velocities can be modified, effectively simulating a beam-induced interaction, and apply reinforcement learning to model construction of specific atomic units consisting of Si dopant atoms on a graphene lattice. We find that it is possible to engineer the reward function of the agent in such a way as to encourage formation of local clusters of dopants, whilst at the same time minimizing the amplitude of momentum changes. Inspection of the learned policies indicates that of fundamental importance is the component of velocity perpendicular to the material plane, and further, that the high stochasticity of the environment leads to conservative policies. This study shows the potential for reinforcement learning agents trained in simulated environments for potential use as atomic scale fabricators, and further, that the dynamics learned by agents encode specific elements of important physics that can be learned.

cond-mat.mes-hall↗

arXiv2021

Decoding the shift-invariant data: applications for band-excitation scanning probe microscopy

A shift-invariant variational autoencoder (shift-VAE) is developed as an unsupervised method for the analysis of spectral data in the presence of shifts along the parameter axis, disentangling the physically-relevant shifts from other latent variables. Using synthetic data sets, we show that the shift-VAE latent variables closely match the ground truth parameters. The shift VAE is extended towards the analysis of band-excitation piezoresponse force microscopy (BE-PFM) data, disentangling the resonance frequency shifts from the peak shape parameters in a model-free unsupervised manner. The extensions of this approach towards denoising of data and model-free dimensionality reduction in imaging and spectroscopic data are further demonstrated. This approach is universal and can also be extended to analysis of X-ray diffraction, photoluminescence, Raman spectra, and other data sets.

cond-mat.dis-nn↗

arXiv2021

Automated and Autonomous Experiment in Electron and Scanning Probe Microscopy

Machine learning and artificial intelligence (ML/AI) are rapidly becoming an indispensable part of physics research, with domain applications ranging from theory and materials prediction to high-throughput data analysis. In parallel, the recent successes in applying ML/AI methods for autonomous systems from robotics through self-driving cars to organic and inorganic synthesis are generating enthusiasm for the potential of these techniques to enable automated and autonomous experiment (AE) in imaging. Here, we aim to analyze the major pathways towards AE in imaging methods with sequential image formation mechanisms, focusing on scanning probe microscopy (SPM) and (scanning) transmission electron microscopy ((S)TEM). We argue that automated experiments should necessarily be discussed in a broader context of the general domain knowledge that both informs the experiment and is increased as the result of the experiment. As such, this analysis should explore the human and ML/AI roles prior to and during the experiment, and consider the latencies, biases, and knowledge priors of the decision-making process. Similarly, such discussion should include the limitations of the existing imaging systems, including intrinsic latencies, non-idealities and drifts comprising both correctable and stochastic components. We further pose that the role of the AE in microscopy is not the exclusion of human operators (as is the case for autonomous driving), but rather automation of routine operations such as microscope tuning, etc., prior to the experiment, and conversion of low latency decision making processes on the time scale spanning from image acquisition to human-level high-order experiment planning.

cs.LG↗

arXiv2021

Toward Decoding the Relationship between Domain Structure and Functionality in Ferroelectrics via Hidden Latent Variables

Polarization switching mechanisms in ferroelectric materials are fundamentally linked to local domain structure and presence of the structural defects, which both can act as nucleation and pinning centers and create local electrostatic and mechanical depolarization fields affecting wall dynamics. However, the general correlative mechanisms between domain structure and polarization dynamics are only weakly explored, precluding insight into the associated physical mechanisms. Here, the correlation between local domain structures and switching behavior in ferroelectric materials is explored using the convolutional encoder-decoder networks, enabling the image to spectral (im2spec) and spectral to image (spec2im) translations via encoding latent variables. The latter reflects the assumption that the relationship between domain structure and polarization switching is parsimonious, i.e. is based upon a small number of local mechanisms. The analysis of latent variables distributions and their real space representations provides insight into the predictability of the local switching behavior, and hence associated physical mechanisms. We further pose that the regions where these correlative relationships are violated, i.e. predictability of the polarization dynamics from domain structure is reduced, represent the obvious target for detailed studies, e.g. in the context of automated experiments. This approach provides a workflow to establish the presence of correlation between local spectral responses and local structure and can be universally applied to spectral imaging techniques such as PFM, scanning tunneling microscopy (STM) and spectroscopy, and electron energy loss spectroscopy (EELS) in scanning transmission electron microscopy (STEM).

cond-mat.dis-nn↗

arXiv2021

Super-R BiFeO$_3$: Epitaxial stabilization of a low-symmetry phase with giant electromechanical response

Piezoelectrics interconvert mechanical energy and electric charge and are widely used in actuators and sensors. The best performing materials are ferroelectrics at a morphotropic phase boundary (MPB), where several phases can intimately coexist. Switching between these phases by electric field produces a large electromechanical response. In the ferroelectric BiFeO$_3$, strain can be used to create an MPB-like phase mixture and thus to generate large electric field dependent strains. However, this enhanced response occurs at localized, randomly positioned regions of the film, which potentially complicates nanodevice design. Here, we use epitaxial strain and orientation engineering in tandem - anisotropic epitaxy - to craft a hitherto unavailable low-symmetry phase of BiFeO$_3$ which acts as a structural bridge between the rhombohedral-like and tetragonal-like polymorphs. Interferometric displacement sensor measurements and first-principle calculations reveal that under external electric bias, this phase undergoes a transition to the tetragonal-like polymorph, generating a piezoelectric response enhanced by over 200%, and associated giant field-induced reversible strain. These results offer a new route to engineer giant electromechanical properties in thin films, with broader perspectives for other functional oxide systems.

cond-mat.mtrl-sci↗

arXiv2021

Predictability as a probe of manifest and latent physics: The case of atomic scale structural, chemical, and polarization behaviors in multiferroic Sm-doped BiFeO3

The predictability of a certain effect or phenomenon is often equated with the knowledge of relevant physical laws, typically understood as a functional or numerically derived relationship between the observations and known states of the system. Correspondingly, observations inconsistent with prior knowledge can be used to derive new knowledge on the nature of the system or indicate the presence of yet unknown mechanisms. Here we explore the applicability of Gaussian Processes (GP) to establish predictability and uncertainty of local behaviors from multimodal observations, providing an alternative to this classical paradigm. Using atomic-resolution Scanning Transmission Electron Microscopy (STEM) of multiferroic Sm-doped BiFeO3 across a broad composition range, we directly visualize the atomic structure and structural, physical, and chemical order parameter fields for the material. GP regression is used to establish the predictability of the local polarization field from different groups of parameters, including the adjacent polarization values and several combinations of physical and chemical descriptors, including lattice parameters, column intensities, etc. We observe that certain elements of microstructure including charged and uncharged domain walls and interfaces with the substrate are best predicted with specific combinations of descriptors, and this predictability and their associated uncertainties are consistent across the composition series. The associated generative physical mechanisms are discussed. We argue that predictability and uncertainty in observational data offers a new pathway to probe the physics of condensed matter systems from multimodal local observations.

cond-mat.mtrl-sci↗

arXiv2021

Exploring physics of ferroelectric domain walls via Bayesian analysis of atomically resolved STEM data

The physics of ferroelectric domain walls is explored using the Bayesian inference analysis of atomically resolved STEM data. We demonstrate that domain wall profile shapes are ultimately sensitive to the nature of the order parameter in the material, including the functional form of Ginzburg-Landau-Devonshire expansion, and numerical value of the corresponding parameters. The preexisting materials knowledge naturally folds in the Bayesian framework in the form of prior distributions, with the different order parameters forming competing (or hierarchical) models. Here, we explore the physics of the ferroelectric domain walls in BiFeO3 using this method, and derive the posterior estimates of relevant parameters. More generally, this inference approach both allows learning materials physics from experimental data with associated uncertainty quantification, and establishing guidelines for instrumental development answering questions on what resolution and information limits are necessary for reliable observation of specific physical mechanisms of interest.

cond-mat.mtrl-sci↗