arXiv subjects

Ravi K. Naik

Publications and source records attributed to Ravi K. Naik.

At least 19 recordsLinked to original sources

arXiv2026

A Qutrit Time Crystal Stabilized with Native Chiral Interactions

Periodically driven quantum many-body systems can spontaneously break discrete time-translation symmetry, realizing discrete time crystals. To date, both experimental and theoretical efforts have largely focused on the simplest case of spontaneous period-doubling in $\mathbb{Z}_2$ discrete time crystals realized with qubits. This owes, in part, to the challenge of stabilizing eigenstate order in higher discrete symmetry ($\mathbb{Z}_n$) time crystals, due to the presence of richer domain wall physics. Here, we demonstrate the realization of a $\mathbb{Z}_3$ discrete time crystal by implementing a Floquet chiral clock model in a chain of 15 superconducting qutrits. Unlike the conventional Ising setting, our system features a tunable chiral angle that governs domain-wall dynamics, spectral degeneracies, and crucially, the stability of time-crystalline order. Using disordered nearest-neighbor chiral interactions, we observe robust subharmonic period tripling that persists across a wide range of drive strengths and is independent of initial state. Finally, we highlight the special role that chirality plays in our $\mathbb{Z}_3$ discrete time crystal -- in its absence, the system's Floquet dynamics exhibit a marked initial state dependence governed by domain wall degeneracies. Our results establish native qudit hardware as a powerful platform to access a broader landscape of non-equilibrium phases.

quant-ph↗

arXiv2026

Hybrid Analog-Digital Simulation of the Abelian Higgs model

To investigate gauge theories with near-term quantum computers warrants exploration of nontraditional quantum simulators to find resource-efficient simulation protocols and ultimately access exotic features of different field theories, including unexplored regimes of the QCD phase diagram. In this work, using superconducting transmon qutrit processors, we formulate and implement a pulse-based, three-level, hybrid analog-digital simulation protocol of the (1+1) dimensional Abelian Higgs model (AHM) on two sites. Alongside this approach, we experimentally realize a gate-based implementation of the same model. Using the natural mapping of the three-level truncation of the transmon Hilbert space to the spin-1 truncated AHM, we observe real time dynamics of AHM field observables, which are analogous to electric field operators, with both protocols. For the analog-digital protocol, we engineer a Floquet simulation with a combination of local analog drives, driven modification of the natural interaction Hamiltonian of the two transmons, and dynamical decoupling pulses. For the digital protocol, we use a state-of-the-art qutrit processor to implement a Trotterized simulation of the model incorporating advanced error mitigation techniques. We further discuss the scalability of the two approaches, and their potential to be extended to the simulation of other model Hamiltonians. Our experiments demonstrate a viable platform for future studies of spin-1 and SU(3) based gauge theory models on current and near-term transmon qutrit processors.

quant-ph↗

arXiv2025

A Practical Introduction to Benchmarking and Characterization of Quantum Computers

Rapid progress in quantum technology has transformed quantum computing and quantum information science from theoretical possibilities into tangible engineering challenges. Breakthroughs in quantum algorithms, quantum simulations, and quantum error correction are bringing useful quantum computation closer to fruition. These remarkable achievements have been facilitated by advances in quantum characterization, verification, and validation (QCVV). QCVV methods and protocols enable scientists and engineers to scrutinize, understand, and enhance the performance of quantum information-processing devices. In this tutorial, we review the fundamental principles underpinning QCVV, and introduce a diverse array of QCVV tools used by quantum researchers. We define and explain QCVV's core models and concepts -- quantum states, measurements, and processes -- and illustrate how these building blocks are leveraged to examine a target system or operation. We survey and introduce protocols ranging from simple qubit characterization to advanced benchmarking methods. Along the way, we provide illustrated examples and detailed descriptions of the protocols, highlight the advantages and disadvantages of each, and discuss their potential scalability to future large-scale quantum computers. This tutorial serves as a guidebook for researchers unfamiliar with the benchmarking and characterization of quantum computers, and also as a detailed reference for experienced practitioners.

quant-ph↗

arXiv2025

Collective Neutrino Oscillations in Three Flavors on Qubit and Qutrit Processors

Collective neutrino flavor oscillations are of primary importance in understanding the dynamic evolution of core-collapse supernovae and subsequent terrestrial detection, but also among the most challenging aspects of numerical simulations. This situation is complicated by the quantum many-body nature of the problem due to neutrino-neutrino interactions which demands a quantum treatment. An additional complication is the presence of three flavors, which often is approximated by the electron flavor and a heavy lepton flavor. In this work, we provide both qubit and qutrit encodings for all three flavors, and develop optimized quantum circuits for the time evolution and analyze the Trotter error. We conclude our study with a hardware experiment of a system of two neutrinos with superconducting hardware: the IBM Torino device for qubits and AQT device for qutrits. We find that error mitigation greatly helps in obtaining a signal consistent with simulations. While hardware results are comparable at this stage, we expect the qutrit setup to be more convenient for large-scale simulations since it does not suffer from probability leakage into nonphsycial qubit space, unlike the qubit setup.

quant-ph↗

arXiv2025

QCaMP: A 4-Week Summer Camp Introducing High School Students to Quantum Information Science and Technology

The 2024 Quantum Computing, Math and Physics Camp (QCaMP) for Students was a 4-week long summer camp aimed at introducing high school students to quantum concepts and careers, including applications spanning quantum computing, sensing, and communication. The program ran for 7 hours/day, Monday-Friday, July 1-26, and included hands-on modules and activities, professional development, and project-based learning. Here we provide details on the camp curriculum and outcomes based on pre and post knowledge and attitudes assessments.

physics.ed-ph↗

arXiv2025

Scalable and Site-Specific Frequency Tuning of Two-Level System Defects in Superconducting Qubit Arrays

State-of-the-art superconducting quantum processors containing tens to hundreds of qubits have demonstrated the building blocks for realizing fault-tolerant quantum computation. Nonetheless, a fundamental barrier to scaling further is the prevalence of fluctuating quantum two-level system (TLS) defects that can couple resonantly to qubits, causing excess decoherence and enhanced gate errors. Here we introduce a scalable architecture for site-specific and in-situ manipulation of TLS frequencies out of the spectral vicinity of our qubits. Our method is resource efficient, combining TLS frequency tuning and universal single qubit control into a single on-chip control line per qubit. We independently control each qubit's dissipative environment to dynamically improve both qubit coherence times and single qubit gate fidelities -- with a constant time overhead that does not scale with the device size. Over a period of 40 hours across 6 qubits, we demonstrate a $36\%$ improvement in average single qubit error rates and a $17\%$ improvement in average energy relaxation times. Critically, we realize a 4-fold suppression in the occurrence of TLS-induced performance outliers, and a complete reduction of simultaneous outlier events. These results mark a significant step toward overcoming the challenges that TLS defects pose to scaling superconducting quantum processors.

quant-ph↗

arXiv2024

Digital Quantum Simulation of Cavity Quantum Electrodynamics: Insights from Superconducting and Trapped Ion Quantum Testbeds

We explore the potential for hybrid development of quantum hardware where currently available quantum computers simulate open Cavity Quantum Electrodynamical (CQED) systems for applications in optical quantum communication, simulation and computing. Our simulations make use of a recent quantum algorithm that maps the dynamics of a singly excited open Tavis-Cummings model containing N atoms coupled to a lossy cavity. We report the results of executing this algorithm on two noisy intermediate-scale quantum computers: a superconducting processor and a trapped ion processor, to simulate the population dynamics of an open CQED system featuring N = 3 atoms. By applying technology-specific transpilation and error mitigation techniques, we minimize the impact of gate errors, noise, and decoherence in each hardware platform, obtaining results which agree closely with the exact solution of the system. These results can be used as a recipe for efficient and platform-specific quantum simulation of cavity-emitter systems on contemporary and future quantum computers.

quant-ph↗

arXiv2024

Hardware-Efficient Randomized Compiling

Randomized compiling (RC) is an efficient method for tailoring arbitrary Markovian errors into stochastic Pauli channels. However, the standard procedure for implementing the protocol in software comes with a large experimental overhead -- namely, it scales linearly in the number of desired randomizations, each of which must be generated and measured independently. In this work, we introduce a hardware-efficient algorithm for performing RC on a cycle-by-cycle basis on the lowest level of our FPGA-based control hardware during the execution of a circuit. Importantly, this algorithm performs a different randomization per shot with zero runtime overhead beyond measuring a circuit without RC. We implement our algorithm using the QubiC control hardware, where we demonstrate significant reduction in the overall runtime of circuits implemented with RC, as well as a significantly lower variance in measured observables.

quant-ph↗

arXiv2024

Distributed Architecture for FPGA-based Superconducting Qubit Control

Quantum circuits utilizing real time feedback techniques (such as active reset and mid-circuit measurement) are a powerful tool for NISQ-era quantum computing. Such techniques are crucial for implementing error correction protocols, and can reduce the resource requirements of certain quantum algorithms. Realizing these capabilities requires flexible, low-latency classical control. We have developed a custom FPGA-based processor architecture for QubiC, an open source platform for superconducting qubit control. Our architecture is distributed in nature, and consists of a bank of lightweight cores, each configured to control a small (1-3) number of signal generator channels. Each core is capable of executing parameterized control and readout pulses, as well as performing arbitrary control flow based on mid-circuit measurement results. We have also developed a modular compiler stack and domain-specific intermediate representation for programming the processor. Our representation allows users to specify circuits using both gate and pulse-level abstractions, and includes high-level control flow constructs (e.g. if-else blocks and loops). The compiler stack is designed to integrate with quantum software tools and programming languages, such as TrueQ, pyGSTi, and OpenQASM3. In this work, we will detail the design of both the processor and compiler stack, and demonstrate its capabilities with a quantum state teleportation experiment using transmon qubits at the LBNL Advanced Quantum Testbed.

quant-ph↗

arXiv2023

Benchmarking quantum logic operations relative to thresholds for fault tolerance

Contemporary methods for benchmarking noisy quantum processors typically measure average error rates or process infidelities. However, thresholds for fault-tolerant quantum error correction are given in terms of worst-case error rates -- defined via the diamond norm -- which can differ from average error rates by orders of magnitude. One method for resolving this discrepancy is to randomize the physical implementation of quantum gates, using techniques like randomized compiling (RC). In this work, we use gate set tomography to perform precision characterization of a set of two-qubit logic gates to study RC on a superconducting quantum processor. We find that, under RC, gate errors are accurately described by a stochastic Pauli noise model without coherent errors, and that spatially-correlated coherent errors and non-Markovian errors are strongly suppressed. We further show that the average and worst-case error rates are equal for randomly compiled gates, and measure a maximum worst-case error of 0.0197(3) for our gate set. Our results show that randomized benchmarks are a viable route to both verifying that a quantum processor's error rates are below a fault-tolerance threshold, and to bounding the failure rates of near-term algorithms, if -- and only if -- gates are implemented via randomization methods which tailor noise.

quant-ph↗

arXiv2023

Demonstrating scalable randomized benchmarking of universal gate sets

Randomized benchmarking (RB) protocols are the most widely used methods for assessing the performance of quantum gates. However, the existing RB methods either do not scale to many qubits or cannot benchmark a universal gate set. Here, we introduce and demonstrate a technique for scalable RB of many universal and continuously parameterized gate sets, using a class of circuits called randomized mirror circuits. Our technique can be applied to a gate set containing an entangling Clifford gate and the set of arbitrary single-qubit gates, as well as gate sets containing controlled rotations about the Pauli axes. We use our technique to benchmark universal gate sets on four qubits of the Advanced Quantum Testbed, including a gate set containing a controlled-S gate and its inverse, and we investigate how the observed error rate is impacted by the inclusion of non-Clifford gates. Finally, we demonstrate that our technique scales to many qubits with experiments on a 27-qubit IBM Q processor. We use our technique to quantify the impact of crosstalk on this 27-qubit device, and we find that it contributes approximately 2/3 of the total error per gate in random many-qubit circuit layers.

quant-ph↗

arXiv2023

QubiC 2.0: An Extensible Open-Source Qubit Control System Capable of Mid-Circuit Measurement and Feed-Forward

Researchers manipulate and measure quantum processing units via the classical electronics control system. We developed an open-source FPGA-based quantum bit control system called QubiC for superconducting qubits. After a few years of qubit calibration and testing experience on QubiC 1.0, we recognized the need for mid-circuit measurements and feed-forward capabilities to implement advanced quantum algorithms effectively. Moreover, following the development of RFSoC technology, we upgraded the system to QubiC 2.0 on an Xilinx ZCU216 evaluation board and developed all these enriched features. The system uses portable FPGA gateware with a simplified processor to handle commands on-the-fly. For design simplicity and straightforward scaling, we adopted a multi-core distributed architecture, assigning one processor core per qubit. The actual pulses combine the unique pulse envelope and carrier information specified in a command. Each pulse envelope is pre-stored on FPGA's block RAMs, ensuring the speed and reusability during the whole circuit. The pulse parameters including amplitude, phase, and frequency can be updated from pulse to pulse. The software stack is developed in Python, running on both the FPGA's ARM core and host computer via XML-RPC. The quantum circuit can be described in a high-level language, which supports programming at both pulse-level and native-gate level, and includes high-level control flow constructs. The QubiC software stack compiles these quantum programs into binary commands that can be loaded into the FPGA. With Qubic 2.0, we successfully achieved multi-FPGA synchronization in bench tests and demonstrated simplified feed-forward experiments on conditional circuits. The enhanced QubiC system represents a significant step forward in quantum computing, providing researchers with powerful tools to explore and implement advanced quantum algorithms and applications.

quant-ph↗

arXiv2023

High-Fidelity Qutrit Entangling Gates for Superconducting Circuits

Ternary quantum information processing in superconducting devices poses a promising alternative to its more popular binary counterpart through larger, more connected computational spaces and proposed advantages in quantum simulation and error correction. Although generally operated as qubits, transmons have readily addressable higher levels, making them natural candidates for operation as quantum three-level systems (qutrits). Recent works in transmon devices have realized high fidelity single qutrit operation. Nonetheless, effectively engineering a high-fidelity two-qutrit entanglement remains a central challenge for realizing qutrit processing in a transmon device. In this work, we apply the differential AC Stark shift to implement a flexible, microwave-activated, and dynamic cross-Kerr entanglement between two fixed-frequency transmon qutrits, expanding on work performed for the $ZZ$ interaction with transmon qubits. We then use this interaction to engineer efficient, high-fidelity qutrit CZ$^†$ and CZ gates, with estimated process fidelities of 97.3(1)% and 95.2(3)% respectively, a significant step forward for operating qutrits on a multi-transmon device.

quant-ph↗

arXiv2023

High-fidelity three-qubit iToffoli gate for fixed-frequency superconducting qubits

The development of noisy intermediate-scale quantum (NISQ) devices has extended the scope of executable quantum circuits with high-fidelity single- and two-qubit gates. Equipping NISQ devices with three-qubit gates will enable the realization of more complex quantum algorithms and efficient quantum error correction protocols with reduced circuit depth. Several three-qubit gates have been implemented for superconducting qubits, but their use in gate synthesis has been limited due to their low fidelity. Here, using fixed-frequency superconducting qubits, we demonstrate a high-fidelity iToffoli gate based on two-qubit interactions, the so-called cross-resonance effect. As with the Toffoli gate, this three-qubit gate can be used to perform universal quantum computation. The iToffoli gate is implemented by simultaneously applying microwave pulses to a linear chain of three qubits, revealing a process fidelity as high as 98.26(2)%. Moreover, we numerically show that our gate scheme can produce additional three-qubit gates which provide more efficient gate synthesis than the Toffoli and iToffoli gates. Our work not only brings a high-fidelity iToffoli gate to current superconducting quantum processors but also opens a pathway for developing multi-qubit gates based on two-qubit interactions.

quant-ph↗

arXiv2023

Extending the Computational Reach of a Superconducting Qutrit Processor

Quantum computing with qudits is an emerging approach that exploits a larger, more-connected computational space, providing advantages for many applications, including quantum simulation and quantum error correction. Nonetheless, qudits are typically afflicted by more complex errors and suffer greater noise sensitivity which renders their scaling difficult. In this work, we introduce techniques to tailor and mitigate arbitrary Markovian noise in qudit circuits. We experimentally demonstrate these methods on a superconducting transmon qutrit processor, and benchmark their effectiveness for multipartite qutrit entanglement and random circuit sampling, obtaining up to 3x improvement in our results. To the best of our knowledge, this constitutes the first ever error mitigation experiment performed on qutrits. Our work shows that despite the intrinsic complexity of manipulating higher-dimensional quantum systems, noise tailoring and error mitigation can significantly extend the computational reach of today's qudit processors.

quant-ph↗

arXiv2023

Stimulated emission of signal photons from dark matter waves

The manipulation of quantum states of light has resulted in significant advancements in both dark matter searches and gravitational wave detectors [1-4]. Current dark matter searches operating in the microwave frequency range use nearly quantum-limited amplifiers [3, 5, 6]. Future high frequency searches will use photon counting techniques [1] to evade the standard quantum limit. We present a signal enhancement technique that utilizes a superconducting qubit to prepare a superconducting microwave cavity in a non-classical Fock state and stimulate the emission of a photon from a dark matter wave. By initializing the cavity in an $|n=4\rangle$ Fock state, we demonstrate a quantum enhancement technique that increases the signal photon rate and hence also the dark matter scan rate each by a factor of 2.78. Using this technique, we conduct a dark photon search in a band around $\mathrm{5.965\, GHz \, (24.67\, μeV)}$, where the kinetic mixing angle $ε\geq 4.35 \times 10^{-13}$ is excluded at the $90\%$ confidence level.

quant-ph↗

arXiv2022

Programmable Heisenberg interactions between Floquet qubits

The fundamental trade-off between robustness and tunability is a central challenge in the pursuit of quantum simulation and fault-tolerant quantum computation. In particular, many emerging quantum architectures are designed to achieve high coherence at the expense of having fixed spectra and consequently limited types of controllable interactions. Here, by adiabatically transforming fixed-frequency superconducting circuits into modifiable Floquet qubits, we demonstrate an XXZ Heisenberg interaction with fully adjustable anisotropy. This interaction model is on one hand the basis for many-body quantum simulation of spin systems, and on the other hand the primitive for an expressive quantum gate set. To illustrate the robustness and versatility of our Floquet protocol, we tailor the Heisenberg Hamiltonian and implement two-qubit iSWAP, CZ, and SWAP gates with estimated fidelities of 99.32(3)%, 99.72(2)%, and 98.93(5)%, respectively. In addition, we implement a Heisenberg interaction between higher energy levels and employ it to construct a three-qubit CCZ gate with a fidelity of 96.18(5)%. Importantly, the protocol is applicable to various fixed-frequency high-coherence platforms, thereby unlocking a suite of essential interactions for high-performance quantum information processing. From a broader perspective, our work provides compelling avenues for future exploration of quantum electrodynamics and optimal control using the Floquet framework.

quant-ph↗

arXiv2021

Optimized fermionic SWAP networks with equivalent circuit averaging for QAOA

The fermionic SWAP network is a qubit routing sequence that can be used to efficiently execute the Quantum Approximate Optimization Algorithm (QAOA). Even with a minimally-connected topology on an n-qubit processor, this routing sequence enables O(n^2) operations to execute in O(n) steps. In this work, we optimize the execution of fermionic SWAP networks for QAOA through two techniques. First, we take advantage of an overcomplete set of native hardware operations [including 150 ns controlled-pi/2 phase gates with up to 99.67(1)% fidelity] in order to decompose the relevant quantum gates and SWAP networks in a manner which minimizes circuit depth and maximizes gate cancellation. Second, we introduce Equivalent Circuit Averaging, which randomizes over degrees of freedom in the quantum circuit compilation to reduce the impact of systematic coherent errors. Our techniques are experimentally validated on the Advanced Quantum Testbed through the execution of QAOA circuits for finding the ground state of two- and four-node Sherrington-Kirkpatrick spin-glass models with various randomly sampled parameters. We observe a ~60% average reduction in error (total variation distance) for QAOA of depth p = 1 on four transmon qubits on a superconducting quantum processor.

quant-ph↗