SearcharxivSearch

arXiv subjects

Regina Caputo

Publications and source records attributed to Regina Caputo.

At least 19 recordsLinked to original sources

Test-Beam Performance of the AstroPix Silicon Sensor for Imaging Calorimetry

AstroPix is a high-voltage CMOS HVCMOS monolithic active pixel sensor MAPS developed for future space-based gamma-ray missions. It is also a candidate technology for the imaging layer of the Barrel Imaging Calorimeter BIC in the ePIC experiment at the future Electron-Ion Collider EIC. We report the first AstroPix test-beam results obtained at the KEK Photon Factory Advanced Ring PF-AR and the CERN Proton Synchrotron PS T10 beam line in 2025, using the third prototype AstroPix-v3. AstroPix-v3 sensors were operated as both standalone tracking layers and imaging layers interleaved with prototype lead/scintillating-fiber Pb/SciFi calorimeter modules, using electron and hadron beams in the few-GeV/c momentum range. Event synchronization between the continuous readout of AstroPix-v3 and the trigger-based readout of the Pb/SciFi calorimeter was achieved using a common timestamp. The AstroPix-v3 sensors exhibit stable performance, reaching a maximum hit efficiency of 68 percent at a bias voltage of -400 V under pion-dominated beam conditions. When combined with the Pb/SciFi calorimeter, the AstroPix layers successfully capture the development of electromagnetic showers. Using Cherenkov-based particle identification, electron-induced events exhibit significantly higher hit multiplicities and broader spatial distributions than pion-induced events, thereby providing clear discrimination between electromagnetic and hadronic showers. These results demonstrate that AstroPix-v3 provides effective, high-granularity imaging of shower development and is well suited as an imaging layer in future calorimeter systems for both collider and space-based experiments.

physics.ins-det

Foundations for Discovery: A Coordinated Fleet Approach to NASA Astrophysics

This white paper presents an analysis of Astro2020 science priorities and NASA's future astrophysics mission architecture, advocating for a coordinated fleet of \$1--2B missions, smaller than typical Flagship observatories, but strategically designed to complement them, i.e. a ``Next Generation Great Observatories" program. The study addresses opportunities in current mission planning, design, and implementation and proposes a strategic approach to maximize scientific return on investment while strengthening partnerships across NASA divisions, other government organizations, universities, and industry.

astro-ph.IM

Beam Test Performance of AstroPix sensor with 120 GeV protons

AstroPix is a high-voltage CMOS (HV-CMOS) monolithic active pixel sensor (MAPS) developed for precision gamma-ray imaging and spectroscopy in the medium energy regime, as well as for precise shower imaging and tracking in the Barrel Imaging Calorimeter (BIC) of the Electron Proton/Ion Collider (ePIC) detector at the future Electron-Ion Collider (EIC). We present beam test results of the AstroPix v3 sensor using a 120 GeV proton beam at the Fermilab Test Beam Facility (FTBF), performed as part of the broader experimental campaign for the BIC prototype calorimeter. The sensor's 500 um pixel pitch enabled precise measurement of the beam profile, providing important information for calorimeter performance studies. Using the measured 120 GeV proton data, we measure the energy deposit of minimum ionizing particles and use them to extract the corresponding effective depletion depth.

physics.ins-det

Performance of the AstroPix Prototype Module for the Barrel Imaging Calorimeter at the ePIC Detector and in Space-Based Payloads

AstroPix is a high-voltage CMOS (HV-CMOS) monolithic active pixel sensor originally developed to enable precision gamma-ray imaging and spectroscopy in the medium-energy regime (approximately 100 keV-100 MeV) based on the groundwork laid by ATLASpix and MuPix. It features a 500 um pixel pitch, in-pixel amplification and digitization, and low power consumption (around 3-4 mW/cm^2), making it scalable for large-area, multilayer telescope detector planes. The detectors have a designed dynamic range of 25 keV to 700 keV. With these features, AstroPix meets the requirements of future space-based high-energy telescopes and the imaging layers of the Barrel Imaging Calorimeter (BIC) in the Electron-Proton/Ion Collider (ePIC) detector at the future Electron-Ion Collider (EIC). For the space-based payload, AstroPix is being integrated into sounding rocket and balloon payloads to demonstrate the technical readiness of the devices. For BIC, AstroPix-based imaging layers interleaved within the lead/scintillating-fiber (Pb/SciFi) sampling calorimeter provide granular shower imaging, enabling key performance features such as electron/pion or gamma/neutral-pion separation. As part of the ongoing detector R&D efforts, we have been testing various AstroPix v3 configurations: the single chip, a quad-chip assembly, a three-layer stack of quad chips, and a nine-chip module that represents the smallest prototype unit of the BIC imaging layer. This presentation will highlight recent performance test results from these AstroPix detector configurations.

astro-ph.IM

Calibration of the ComPair Balloon Instrument

ComPair, the prototype of the All-sky Medium Energy Gamma-ray Observatory (AMEGO) mission concept, is a combined Compton imager and pair production telescope. It consists of four subsystems: a double-sided silicon strip detector (DSSD) Tracker, a virtual Frisch-grid cadmium zinc telluride (CZT) Low Energy Calorimeter, a cesium iodide (CsI) High Energy Calorimeter, and a plastic scintillator Anti-Coincidence Detector (ACD) to reject the charged particle background. These subsystems work together to reconstruct events, by tracking the locations and energies of gamma-ray scatters and pair production events. To quantify ComPair's scientific capabilities prior to a balloon launch in 2023, calibrations were performed to benchmark the instrument's performance in terms of angular resolution, energy resolution, and effective area. In this paper we provide an overview of the ComPair instrument and detail the calibration campaign. Finally, we compare our results to the expected performance based on simulations.

astro-ph.IM

A multi-wavelength view of the multi-messenger sources NGC 1068 and PKS 1502+1061

Multi-messenger astronomy offers a powerful approach to studying high-energy radiative processes in astrophysical sources. A notable example was seen in 2017, when the IceCube Neutrino Observatory detected a high-energy neutrino event that was found to coincide with a gamma-ray flare from a blazar. Since then, numerous multi-messenger studies combining neutrino and photon data have been conducted, yet the origin of neutrinos from active galactic nuclei (AGN) remains uncertain. In this work, we present the results of an X-ray observing program targeting two AGNs, NGC 1068 and PKS 1502+106. The multi-wavelength dataset includes new observations from NICER and NuSTAR from the observing proposal along with gamma-ray data collected using Fermi-LAT, and one archival observation from Chandra. Additionally, we derive the neutrino fluxes for both AGNs using ten years of IceCube data and neutrino spectra predicted by theoretical models. These results demonstrate the value of combining multi-messenger data in building and constraining theoretical models. They also highlight the importance of testing model predictions against observational data to refine measurements of both the neutrino flux and spectral shape.

astro-ph.HE

Evaluation of gamma-ray response of the AstroPix4 HV-CMOS active pixel sensor

AstroPix is a novel high-voltage CMOS active pixel sensor being developed for a next generation gamma-ray space telescope, AMEGO-X. To meet AMEGO-X instrument requirements, AstroPix must achieve full depletion of its $500~\rm{\mu m}$ thick, $500~\rm{\mu m}$-pitch pixels. It must be sensitive to gamma rays in the range of $25-700$ keV, with the energy resolution at 122 keV of $<10$%. Furthermore, given the space-based nature of AMEGO-X, the power consumption of AstroPix needs to be lower than $1.5~\rm{mW/{cm}^2}$. We report the gamma-ray response of the latest version of AstroPix, AstroPix4. The chip contains $16\times 13$ array of $500~\rm{\mu m}$-pitch pixels. The power consumption is estimated to be about $2~\rm{mW/{cm}^2}$, which is approximately half the power of the previous AstroPix version. The input capacitance is reduced, allowing for the detection of the 14 keV photopeak from $\rm{^{57}Co}$ and a moderate energy resolution of 14% at 122 keV. The dynamic range is estimated to be in the range from 14 keV to $\sim250$ keV. We found that the sensor depletion layer expands as expected and the measured depletion depth is approximately $90~\rm{\mu m}$ when biased at $-240$ V.

astro-ph.IM

Background Measurements and Simulations of the ComPair Balloon Flight

ComPair, a prototype of the All-sky Medium Energy Gamma-ray Observatory (AMEGO), completed a short-duration high-altitude balloon campaign on August 27, 2023 from Fort Sumner, New Mexico, USA. The goal of the balloon flight was the demonstration of ComPair as both a Compton and Pair telescope in flight, rejection of the charged particle background, and measurement of the background $\gamma$-ray spectrum. This analysis compares measurements from the balloon flight with Monte Carlo simulations to benchmark the instrument. The comparison finds good agreement between the measurements and simulations and supports the conclusion that ComPair accomplished its goals for the balloon campaign. Additionally, two charged particle background rejection schemes are discussed: a soft ACD veto that records a higher charged particle event rate but with less risk of event loss, and a hard ACD veto that limits the charged particle event rate on board. There was little difference in the measured spectra from the soft and hard ACD veto schemes, indicating that the hard ACD veto could be used for future flights. The successes of ComPair's engineering flight will inform the development of the next generation of ComPair with upgraded detector technology and larger active area.

astro-ph.IM

AstroPix: A Pixelated HVCMOS Sensor for Space-Based Gamma-Ray Measurement

A next-generation medium-energy gamma-ray telescope targeting the MeV range would address open questions in astrophysics regarding how extreme conditions accelerate cosmic-ray particles, produce relativistic jet outflows, and more. One concept, AMEGO-X, relies upon the mission-enabling CMOS Monolithic Active Pixel Sensor silicon chip AstroPix. AstroPix is designed for space-based use, featuring low noise, low power consumption, and high scalability. Desired performance of the device include an energy resolution of 5 keV (or 10% FWHM) at 122 keV and a dynamic range per-pixel of 25-700 keV, enabled by the addition of a high-voltage bias to each pixel which supports a depletion depth of 500 um. This work reports on the status of the AstroPix development process with emphasis on the current version under test, version three (v3), and highlights of version two (v2). Version 3 achieves energy resolution of 10.4 +/- 3.2% at 59.5 keV and 94 +/- 6 um depletion in a low-resistivity test silicon substrate.

astro-ph.IM

ComPair-2: A Next Generation Medium Energy Gamma-ray Telescope Prototype

Many questions posed in the Astro2020 Decadal survey in both the New Messengers and New Physics and the Cosmic Ecosystems science themes require a gamma-ray mission with capabilities exceeding those of existing (e.g. Fermi, Swift) and planned (e.g. COSI) observatories. ComPair, the Compton Pair telescope, is a prototype of such a next-generation gamma-ray mission. It had its inaugural balloon flight from Ft. Sumner, New Mexico in August 2023. To continue the goals of the ComPair project to develop technologies that will enable a future gamma-ray mission, the next generation of ComPair (ComPair-2) will be upgraded to increase the sensitivity and low-energy transient capabilities of the instrument. These advancements are enabled by AstroPix, a silicon monolithic active pixel sensor, in the tracker and custom dual-gain silicon photomultipliers and front-end electronics in the calorimeter. This effort builds on design work for the All-sky Medium Energy Gamma-ray Observatory eXplorer (AMEGO-X) concept that was submitted the 2021 MIDEX Announcement of Opportunity. Here we describe the ComPair-2 prototype design and integration and testing plans to advance the readiness level of these novel technologies.

astro-ph.IM

A-STEP: The AstroPix Sounding Rocket Technology Demonstration Payload

A next-generation medium-energy (100 keV to 100 MeV) gamma-ray observatory will greatly enhance the identification and characterization of multimessenger sources in the coming decade. Coupling gamma-ray spectroscopy, imaging, and polarization to neutrino and gravitational wave detections will develop our understanding of various astrophysical phenomena including compact object mergers, supernovae remnants, active galactic nuclei and gamma-ray bursts. An observatory operating in the MeV energy regime requires technologies that are capable of measuring Compton scattered photons and photons interacting via pair production. AstroPix is a monolithic high voltage CMOS active pixel sensor which enables future gamma-ray telescopes in this energy range. AstroPix's design is iterating towards low-power (~1.5 mW/cm$^{2}$), high spatial (500 microns pixel pitch) and spectral (<5 keV at 122 keV) tracking of photon and charged particle interactions. Stacking planar arrays of AstroPix sensors in three dimensions creates an instrument capable of reconstructing the trajectories and energies of incident gamma rays over large fields of view. A prototype multi-layered AstroPix instrument, called the AstroPix Sounding rocket Technology dEmonstration Payload (A-STEP), will test three layers of AstroPix quad chips in a suborbital rocket flight. These quad chips (2x2 joined AstroPix sensors) form the 4x4 cm$^{2}$ building block of future large area AstroPix instruments, such as ComPair-2 and AMEGO-X. This payload will be the first demonstration of AstroPix detectors operated in a space environment and will demonstrate the technology's readiness for future astrophysical and nuclear physics applications. In this work, we overview the design and state of development of the ASTEP payload.

astro-ph.IM

The 2023 Balloon Flight of the ComPair Instrument

The ComPair balloon instrument is a prototype gamma-ray telescope that aims to further develop technology for observing the gamma-ray sky in the MeV regime. ComPair combines four detector subsystems to enable parallel Compton scattering and pair-production detection, critical for observing in this energy range. This includes a 10 layer double-sided silicon strip detector tracker, a virtual Frisch grid low energy CZT calorimeter, a high energy CsI calorimeter, and a plastic scintillator anti-coincidence detector. The inaugural balloon flight successfully launched from the Columbia Scientific Balloon Facility site in Fort Sumner, New Mexico, in late August 2023, lasting approximately 6.5 hours in duration. In this proceeding, we discuss the development of the ComPair Since balloon payload, the performance during flight, and early results.

astro-ph.IM

Performance evaluation of the high-voltage CMOS active pixel sensor AstroPix for gamma-ray space telescopes

AstroPix is a novel monolithic high-voltage CMOS active pixel sensor proposed for next generation medium-energy gamma-ray observatories like the All-sky Medium Energy Gamma-ray Observatory eXplorer (AMEGO-X). For AMEGO-X AstroPix must maintain a power consumption of less than $1.5~\rm{mW/{cm}^2}$ while having a pixel pitch of up to $500~\rm{\mu m}$. We developed the second and third versions of AstroPix, namely AstroPix2 and AstroPix3. AstroPix2 and AstroPix3 exhibit power consumptions of $3.4~\rm{mW/{cm}^2}$ and $4.1~\rm{mW/{cm}^2}$, respectively. While AstroPix2 has a pixel pitch of $250~\rm{\mu m}$, AstroPix3 achieves the desired size for AMEGO-X with a pixel pitch of $500~\rm{\mu m}$. Performance evaluation of a single pixel in an AstroPix2 chip revealed a dynamic range from 13.9 keV to 59.5 keV, with the energy resolution meeting the AMEGO-X target value ($<10\%$ (FWHM) at 60 keV). We performed energy calibration on most of the pixels in an AstroPix3 chip, yielding a mean energy resolution of 6.2 keV (FWHM) at 59.5 keV, with 44.4% of the pixels satisfying the target value. The dynamic range of AstroPix3 was assessed to span from 22.2 keV to 122.1 keV. The expansion of the depletion layer aligns with expectations in both AstroPix2 and AstroPix3. Furthermore, radiation tolerance testing was conducted on AstroPix. An AstroPix2 chip was subjected to an equivalent exposure of approximately 10 Gy from a high-intensity $\rm{^{60}Co}$ source. The chip was fully operational after irradiation although a decrease in gain by approximately 4% was observed.

astro-ph.IM

The Double-Sided Silicon Strip Detector Tracker onboard the ComPair Balloon Flight

The ComPair balloon instrument is a prototype of the All-sky Medium Energy Gamma-ray Observatory (AMEGO) mission concept. AMEGO aims to bridge the spectral gap in sensitivity that currently exists from $\sim$100 keV to $\sim$100 MeV by being sensitive to both Compton and pair-production events. This is made possible through the use of four subsystems working together to reconstruct events: a double-sided silicon strip detector (DSSD) Tracker, a virtual Frisch grid cadmium zinc telluride (CZT) Low Energy Calorimeter, a ceasium iodide (CsI) High Energy Calorimeter, and an anti-coincidence detector (ACD) to reject charged particle backgrounds. Composed of 10 layers of DSSDs, ComPair's Tracker is designed to measure the position of photons that Compton scatter in the silicon, as well as reconstruct the tracks of electrons and positrons from pair-production as they propagate through the detector. By using these positions, as well as the absorbed energies in the Tracker and 2 Calorimeters, the energy and direction of the incident photon can be determined. This proceeding will present the development, testing, and calibration of the ComPair DSSD Tracker and early results from its balloon flight in August 2023.

astro-ph.IM

The path toward 500 $\mu$m depletion of AstroPix, a pixelated silicon HVCMOS sensor for space and EIC

The precise reconstruction of Compton-scatter events is paramount for an imaging medium-energy gamma-ray telescope. The proposed AMEGO-X is enabled by a silicon tracker utilizing AstroPix chips - a pixelated silicon HVCMOS sensor novel for space use. To achieve science goals, each 500 x 500 $\mu$m$^2$ pixel must be sensitive for energy deposits ranging from 25 - 700 keV with an energy resolution of 5 keV at 122 keV (< 10%). This is achieved through depletion of the 500 $\mu$m thick sensor, although complete depletion poses an engineering and design challenge. This work will summarize the current status of depletion measurements highlighting direct measurement with TCT laser scanning and the agreement with simulation. Future plans for further testing will also be identified.

astro-ph.IM

Results from the CsI Calorimeter onboard the 2023 ComPair Balloon Flight

The ComPair gamma-ray telescope is a technology demonstrator for a future gamma-ray telescope called the All-sky Medium Energy Gamma-ray Observatory (AMEGO). The instrument is composed of four subsystems, a double-sided silicon strip detector, a virtual Frisch grid CdZnTe calorimeter, a CsI:Tl based calorimeter, and an anti-coincidence detector (ACD). The CsI calorimeter's goal is to measure the position and energy deposited from high-energy events. To demonstrate the technological readiness, the calorimeter has flown onboard a NASA scientific balloon as part of the GRAPE-ComPair mission and accumulated around 3 hours of float time at an altitude of 40 km. During the flight, the CsI calorimeter observed background radiation, Regener-Pfotzer Maximum, and several gamma-ray activation lines originating from aluminum.

astro-ph.IM

The Anti-Coincidence Detector Subsystem for ComPair

ComPair is a prototype gamma-ray telescope for the development of key technologies for next-generation gamma-ray detectors consisting of four subsystems: a 10-layer double-sided silicon strip detector tracker, a cadmium zinc telluride calorimeter, a cesium iodide calorimeter, and a plastic anti-coincidence detector (ACD). The ACD acts as an active shield to veto charged particle events and consists of 5 plastic scintillating panels. ComPair was launched as a balloon payload from Ft. Sumner, New Mexico and completed a 6-hour flight on August 27, 2023. Here we detail the design adn calibration of the ComPair ACD, and report on the ACD's veto efficiency and other performance metrics during the ComPair fight.

astro-ph.IM

The Compton-Pair telescope: A prototype for a next-generation MeV $γ$-ray observatory

The Compton Pair (ComPair) telescope is a prototype that aims to develop the necessary technologies for future medium energy gamma-ray missions and to design, build, and test the prototype in a gamma-ray beam and balloon flight. The ComPair team has built an instrument that consists of 4 detector subsystems: a double-sided silicon strip detector Tracker, a novel high-resolution virtual Frisch-grid cadmium zinc telluride Calorimeter, and a high-energy hodoscopic cesium iodide Calorimeter, all of which are surrounded by a plastic scintillator anti-coincidence detector. These subsystems together detect and characterize photons via Compton scattering and pair production, enable a veto of cosmic rays, and are a proof-of-concept for a space telescope with the same architecture. A future medium-energy gamma-ray mission enabled through ComPair will address many questions posed in the Astro2020 Decadal survey in both the New Messengers and New Physics and the Cosmic Ecosystems themes. In this contribution, we will give an overview of the ComPair project and steps forward to the balloon flight.

astro-ph.IM