arXiv subjects

Riccardo Borgani

Publications and source records attributed to Riccardo Borgani.

14 recordsLinked to original sources

arXiv2025

Low-temperature AFM with a microwave cavity optomechanical transducer

We demonstrate AFM imaging with a microcantilever force transducer where an integrated superconducting microwave resonant circuit detects cantilever deflection using the principles of cavity optomechanics. We discuss the detector responsivity and added noise pointing to its crucial role in the context of force sensitivity. Through analysis of noise measurements we determine the effective temperature of the cantilever eigenmode and we determine the region of detector operation in which the sensor is thermal-noise limited. Our analysis shows that the force-sensor design is a significant improvement over piezoelectric force sensors commonly used in low-temperature AFM. We discuss the potential for further improvement of the sensor design to achieve optimal detection at the standard quantum limit. We demonstrate AFM operation with surface-tracking feedback in both amplitude-modulation and frequency-modulation modes.

physics.app-ph↗

arXiv2023

Characterization and benchmarking of a phase-sensitive two-qubit gate using direct digital synthesis

We implement an iSWAP gate with two transmon qubits using a flux-tunable coupler. Precise control of the relative phase of the qubit-control pulses and the parametric-coupler drive is achieved with a multi-channel instrument called Presto using direct digital synthesis (DDS), a promising technique for scaling up quantum systems. We describe the process of tuning and benchmarking the iSWAP gate, where the relative phase of the pulses is controlled via software. We perform the iSWAP gate in 290 ns, validate it with quantum-state tomography, and measure 2\% error with interleaved randomized benchmarking.

quant-ph↗

arXiv2023

Multipartite entanglement in a microwave frequency comb

Significant progress has been made with multipartite entanglement of discrete qubits, but continuous variable systems may provide a more scalable path toward entanglement of large ensembles. We demonstrate multipartite entanglement in a microwave frequency comb generated by a Josephson parametric amplifier subject to a bichromatic pump. We find 64 correlated modes in the transmission line using a multifrequency digital signal processing platform. Full inseparability is verified in a subset of seven modes. Our method can be expanded to generate even more entangled modes in the near future.

quant-ph↗

arXiv2022

Measurement and control of a superconducting quantum processor with a fully-integrated radio-frequency system on a chip

We describe a digital microwave platform called Presto, designed for measurement and control of multiple quantum bits (qubits) and based on the third-generation radio-frequency system on a chip. Presto uses direct digital synthesis to create signals up to 9 GHz on 16 synchronous output ports, while synchronously analyzing response on 16 input ports. Presto has 16 DC-bias outputs, 4 inputs and 4 outputs for digital triggers or markers, and two continuous-wave outputs for synthesizing frequencies up to 15 GHz. Scaling to a large number of qubits is enabled through deterministic synchronization of multiple Presto units. A Python application programming interface configures a firmware for synthesis and analysis of pulses, coordinated by an event sequencer. The analysis integrates template matching (matched filtering) and low-latency (184 - 254 ns) feedback to enable a wide range of multi-qubit experiments. We demonstrate Presto's capabilities with experiments on a sample consisting of two superconducting qubits connected via a flux-tunable coupler. We show single-shot readout and active reset of a single qubit; randomized benchmarking of single-qubit gates showing 99.972% fidelity, limited by the coherence time of the qubit; and calibration of a two-qubit iSWAP gate.

quant-ph↗

arXiv2022

Robust preparation of Wigner-negative states with optimized SNAP-displacement sequences

Hosting non-classical states of light in three-dimensional microwave cavities has emerged as a promising paradigm for continuous-variable quantum information processing. Here we experimentally demonstrate high-fidelity generation of a range of Wigner-negative states useful for quantum computation, such as Schrödinger-cat states, binomial states, Gottesman-Kitaev-Preskill (GKP) states, as well as cubic phase states. The latter states have been long sought after in quantum optics and were never achieved experimentally before. To do so, we use a sequence of interleaved selective number-dependent arbitrary phase (SNAP) gates and displacements. We optimize the state preparation in two steps. First we use a gradient-descent algorithm to optimize the parameters of the SNAP and displacement gates. Then we optimize the envelope of the pulses implementing the SNAP gates. Our results show that this way of creating highly non-classical states in a harmonic oscillator is robust to fluctuations of the system parameters such as the qubit frequency and the dispersive shift.

quant-ph↗

arXiv2022

Squeezing and multimode entanglement of surface acoustic wave phonons

Exploiting multiple modes in a quantum acoustic device could enable applications in quantum information in a hardware-efficient setup, including quantum simulation in a synthetic dimension and continuous-variable quantum computing with cluster states.We develop a multimode surface acoustic wave (SAW) resonator with a superconducting quantum interference device (SQUID) integrated in one of the Bragg reflectors. The interaction with the SQUID-shunted mirror gives rise to coupling between the more than 20 accessible resonator modes. We exploit this coupling to demonstrate two-mode squeezing of SAW phonons, as well as four-mode multipartite entanglement. Our results open avenues for continuous-variable quantum computing in a compact hybrid quantum system.

quant-ph↗

arXiv2018

Fast multifrequency measurement of nonlinear conductance

We describe a phase-coherent multifrequency lock-in measurement technique that uses the inverse Fourier transform to reconstruct the nonlinear current-voltage characteristic (IVC) of a nanoscale junction. The method provides for a separation of the galvanic and displacement currents in the junction, and easy cancellation of the parasitic displacement current from the measurement leads. These two features allow us to overcome traditional limitations imposed by the low conductance of the junction and high capacitance of the leads, thus providing an increase in measurement speed of several orders of magnitude. We demonstrate the method in the context of conductive atomic force microscopy, acquiring IVCs at every pixel while scanning at standard imaging speed.

cond-mat.mes-hall↗

arXiv2018

Intermodulation spectroscopy as an alternative to pump-probe for the measurement of fast dynamics at the nanometer scale

We present an alternative approach to pump-probe spectroscopy for measuring fast charge dynamics with an atomic force microscope (AFM). Our approach is based on coherent multifrequency lock-in measurement of the intermodulation between a mechanical drive and an optical or electrical excitation. In response to the excitation, the charge dynamics of the sample is reconstructed by fitting a theoretical model to the measured frequency spectrum of the electrostatic force near resonance of the AFM cantilever. We discuss the time resolution, which in theory is limited only by the measurement time, but in practice is of order one nanosecond for standard cantilevers and imaging speeds. We verify the method with simulations and demonstrate it with a control experiment, achieving a time resolution of $20~\mathrm{ns}$ in ambient conditions, limited by thermal noise.

cond-mat.mes-hall↗

arXiv2018

Calibrating torsional eigenmodes of micro cantilevers for dynamic measurement of frictional forces

Non-invasive thermal noise calibration of both torsional and flexural eigenmodes is performed on numerous cantilevers of 10 different types. We show that for all tipless and short-tipped cantilevers, the ratio of torsional to flexural mode stiffness is given by a constant, times the ratio of their resonant frequencies. By determining this constant we enable a calibration of the torsional eigenmode, starting from a calibration of the flexural eigenmode. Our results are well motivated from beam theory and we verify them with finite element simulation.

cond-mat.mtrl-sci↗

arXiv2018

On modeling and measuring viscoelasticity with dynamic Atomic Force Microscopy

The interaction between a rapidly oscillating atomic force microscope tip and a soft material surface is described using both elastic and viscous forces with a moving surface model. We derive the simplest form of this model, motivating it as a way to capture the impact dynamics of the tip and sample with an interaction consisting of two components: interfacial or surface force, and bulk or volumetric force. Analytic solutions to the piece-wise linear model identify characteristic time constants, providing a physical explanation of the hysteresis observed in the measured dynamic force quadrature curves. Numerical simulation is used to fit the model to experimental data and excellent agreement is found with a variety of different samples. The model parameters form a dimensionless impact-rheology factor, giving a quantitative physical number to characterize a viscoelastic surface that does not depend on the tip shape or cantilever frequency.

physics.app-ph↗

arXiv2017

Background force compensation in dynamic atomic force microscopy

Background forces are linear long-range interactions of the cantilever body with its surroundings that must be compensated for in order to reveal tip-surface force, the quantity of interest for determining material properties in atomic force microscopy. We provide a mathematical derivation of a method to compensate for background forces, apply it to experimental data, and discuss how to include background forces in simulation. Our method, based on linear-response theory in the frequency domain, provides a general way of measuring and compensating for any background force and it can be readily applied to different force reconstruction methods in dynamic AFM.

cond-mat.mes-hall↗

arXiv2016

Imaging high-speed friction at the nanometer scale

Friction is a complicated phenomenon involving nonlinear dynamics at different length and time scales[1, 2]. The microscopic origin of friction is poorly understood, due in part to a lack of methods for measuring the force on a nanometer-scale asperity sliding at velocity of the order of cm/s.[3, 4] Despite enormous advance in experimental techniques[5], this combination of small length scale and high velocity remained illusive. Here we present a technique for rapidly measuring the frictional forces on a single asperity (an AFM tip) over a velocity range from zero to several cm/s. At each image pixel we obtain the velocity dependence of both conservative and dissipative forces, revealing the transition from stick-slip to a smooth sliding friction[1, 6]. We explain measurements on graphite using a modified Prandtl-Tomlinson model that takes into account the damped elastic deformation of the asperity. With its greatly improved force sensitivity and very small sliding amplitude, our method enables rapid and detailed surface mapping of the full velocity-dependence of frictional forces with less than 10~nm spatial resolution.

cond-mat.mes-hall↗

arXiv2016

A virtual instrument to standardise the calibration of atomic force microscope cantilevers

Atomic force microscope (AFM) users often calibrate the spring constants of cantilevers using functionality built into individual instruments. This is performed without reference to a global standard, which hinders robust comparison of force measurements reported by different laboratories. In this article, we describe a virtual instrument (an internet-based initiative) whereby users from all laboratories can instantly and quantitatively compare their calibration measurements to those of others - standardising AFM force measurements - and simultaneously enabling non-invasive calibration of AFM cantilevers of any geometry. This global calibration initiative requires no additional instrumentation or data processing on the part of the user. It utilises a single website where users upload currently available data. A proof-of-principle demonstration of this initiative is presented using measured data from five independent laboratories across three countries, which also allows for an assessment of current calibration.

physics.ins-det↗

arXiv2014

Intermodulation electrostatic force microscopy for imaging surface photo-voltage

We demonstrate an alternative to Kelvin Probe Force Microscopy for imaging surface potential. The open-loop, single-pass technique applies a low-frequency AC voltage to the atomic force microscopy tip while driving the cantilever near its resonance frequency. Frequency mixing due to the nonlinear capacitance gives intermodulation products of the two drive frequencies near the cantilever resonance, where they are measured with high signal to noise ratio. Analysis of this intermodulation response allows for quantitative reconstruction of the contact potential difference. We derive the theory of the method, validate it with numerical simulation and a control experiment, and we demonstrate its utility for fast imaging of the surface photo-voltage on an organic photo-voltaic material.

cond-mat.mes-hall↗