arXiv subjects

Roland Tóth

Publications and source records attributed to Roland Tóth.

At least 55 records · Page 3Linked to original sources

arXiv2025

Port-Hamiltonian Neural Networks with Output Error Noise Models

Hamiltonian neural networks (HNNs) represent a promising class of physics-informed deep learning methods that utilize Hamiltonian theory as foundational knowledge within neural networks. However, their direct application to engineering systems is often challenged by practical issues, including the presence of external inputs, dissipation, and noisy measurements. This paper introduces a novel framework that enhances the capabilities of HNNs to address these real-life factors. We integrate port-Hamiltonian theory into the neural network structure, allowing for the inclusion of external inputs and dissipation, while mitigating the impact of measurement noise through an output-error (OE) model structure. The resulting output error port-Hamiltonian neural networks (OE-pHNNs) can be adapted to tackle modeling complex engineering systems with noisy measurements. Furthermore, we propose the identification of OE-pHNNs based on the subspace encoder approach (SUBNET), which efficiently approximates the complete simulation loss using subsections of the data and uses an encoder function to predict initial states. By integrating SUBNET with OE-pHNNs, we achieve consistent models of complex engineering systems under noisy measurements. In addition, we perform a consistency analysis to ensure the reliability of the proposed data-driven model learning method. We demonstrate the effectiveness of our approach on system identification benchmarks, showing its potential as a powerful tool for modeling dynamic systems in real-world applications.

cs.LG↗

arXiv2025

Automated Linear Parameter-Varying Modeling of Nonlinear Systems: A Global Embedding Approach

In this paper, an automated Linear Parameter-Varying (LPV) model conversion approach is proposed for nonlinear dynamical systems. The proposed method achieves global embedding of the original nonlinear behavior of the system by leveraging the second fundamental theorem of calculus to factorize matrix function expressions without any approximation. The implementation of the proposed method in the LPVcore toolbox for Matlab is discussed, and its performance is showcased on a comprehensive example of automated LPV model conversion of an unbalanced disk system, which is then used to design an LPV controller that is deployed on the original nonlinear system. In addition, the conversion capabilities are further demonstrated by obtaining an LPV embedding of a three-degree-of-freedom control moment gyroscope. All software implementations are available at www.lpvcore.net.

eess.SY↗

arXiv2024

Direct Data-Driven State-Feedback Control of Linear Parameter-Varying Systems

The framework of linear parameter-varying (LPV) systems has shown to be a powerful tool for the design of controllers for complex nonlinear systems using linear tools. In this work, we derive novel methods that allow to synthesize LPV state-feedback controllers directly from only a single sequence of data and guarantee stability and performance of the closed-loop system. We show that if the measured open-loop data from the system satisfies a persistency of excitation condition, then the full open-loop and closed-loop input-scheduling-state behavior can be represented using only the data. With this representation we formulate data-driven analysis and synthesis problems, where the latter yields controllers that guarantee stability and performance in terms of infinite horizon quadratic cost, generalized $\mathcal{H}_2$-norm and $\ell_2$-gain of the closed-loop system. The controllers are synthesized by solving a semi-definite program. Additionally, we provide a synthesis method to handle noisy measurement data. Competitive performance of the proposed data-driven synthesis methods is demonstrated w.r.t. model-based synthesis in multiple simulation studies, including a nonlinear unbalanced disc system.

eess.SY↗

arXiv2024

Frequency Domain Auto-tuning of Structured LPV Controllers for High-Precision Motion Control

Motion systems are a vital part of many industrial processes. However, meeting the increasingly stringent demands of these systems, especially concerning precision and throughput, requires novel control design methods that can go beyond the capabilities of traditional solutions. Traditional control methods often struggle with the complexity and position-dependent effects inherent in modern motion systems, leading to compromises in performance and a laborious task of controller design. This paper addresses these challenges by introducing a novel structured feedback control auto-tuning approach for multiple-input multiple-output (MIMO) motion systems. By leveraging frequency response function (FRF) estimates and the linear-parameter-varying (LPV) control framework, the proposed approach automates the controller design, while providing local stability and performance guarantees. Key innovations include norm-based magnitude optimization of the sensitivity functions, an automated stability check through a novel extended factorized Nyquist criterion, a modular structured MIMO LPV controller parameterization, and a controller discretization approach which preserves the continuous-time (CT) controller parameterization. The proposed approach is validated through experiments using a state-of-the-art moving-magnet planar actuator prototype.

eess.SY↗

arXiv2024

Decoupling parameter variation from noise: Biquadratic Lyapunov forms in data-driven LPV control

A promising step from linear towards nonlinear data-driven control is via the design of controllers for linear parameter-varying (LPV) systems, which are linear systems whose parameters are varying along a measurable scheduling signal. However, the interplay between uncertainty arising from corrupted data and the parameter-varying nature of these systems impacts the stability analysis and limits the generalization of well-understood data-driven methods available for linear time-invariant systems. In this work, we decouple this interplay using a recently developed variant of the Fundamental Lemma for LPV systems and the concept of data-informativity, in combination with biquadratic Lyapunov forms. Together, these allow us to develop novel linear matrix inequality conditions for the existence of scheduling-dependent Lyapunov functions, incorporating the intrinsic nonlinearity. Appealingly, these results are stated purely in terms of the collected data and bounds on the noise, and they are computationally favorable to check.

eess.SY↗

arXiv2024

Space-Filling Input Design for Nonlinear State-Space Identification

The quality of a model resulting from (black-box) system identification is highly dependent on the quality of the data that is used during the identification procedure. Designing experiments for linear time-invariant systems is well understood and mainly focuses on the power spectrum of the input signal. Performing experiment design for nonlinear system identification on the other hand remains an open challenge as informativity of the data depends both on the frequency-domain content and on the time-domain evolution of the input signal. Furthermore, as nonlinear system identification is much more sensitive to modeling and extrapolation errors, having experiments that explore the considered operation range of interest is of high importance. Hence, this paper focuses on designing space-filling experiments i.e., experiments that cover the full operation range of interest, for nonlinear dynamical systems that can be represented in a state-space form using a broad set of input signals. The presented experiment design approach can straightforwardly be extended to a wider range of system classes (e.g., NARMAX). The effectiveness of the proposed approach is illustrated on the experiment design for a nonlinear mass-spring-damper system, using a multisine input signal.

eess.SY↗

arXiv2024

Baseline Results for Selected Nonlinear System Identification Benchmarks

Nonlinear system identification remains an important open challenge across research and academia. Large numbers of novel approaches are seen published each year, each presenting improvements or extensions to existing methods. It is natural, therefore, to consider how one might choose between these competing models. Benchmark datasets provide one clear way to approach this question. However, to make meaningful inference based on benchmark performance it is important to understand how well a new method performs comparatively to results available with well-established methods. This paper presents a set of ten baseline techniques and their relative performances on five popular benchmarks. The aim of this contribution is to stimulate thought and discussion regarding objective comparison of identification methodologies.

eess.SY↗

arXiv2024

Kernel-based multi-step predictors for data-driven analysis and control of nonlinear systems through the velocity form

We propose kernel-based approaches for the construction of a single-step and multi-step predictor of the velocity form of nonlinear (NL) systems, which describes the time-difference dynamics of the corresponding NL system and admits a highly structured representation. The predictors in turn allow to formulate completely data-driven representations of the velocity form. The kernel-based formulation that we derive, inherently respects the structured quasi-linear and specific time-dependent relationship of the velocity form. This results in an efficient multi-step predictor for the velocity form and hence for nonlinear systems. Moreover, by using the velocity form, our methods open the door for data-driven behavioral analysis and control of nonlinear systems with global stability and performance guarantees.

eess.SY↗

arXiv2024

Data-driven Dissipativity Analysis of Linear Parameter-Varying Systems

We derive direct data-driven dissipativity analysis methods for Linear Parameter-Varying (LPV) systems using a single sequence of input-scheduling-output data. By means of constructing a semi-definite program subject to linear matrix inequality constraints based on this data-dictionary, direct data-driven verification of $(Q,S,R)$-type of dissipativity properties of the data-generating LPV system is achieved. Multiple implementation methods are proposed to achieve efficient computational properties and to even exploit structural information on the scheduling, e.g., rate bounds. The effectiveness and trade-offs of the proposed methodologies are shown in simulation studies of academic and physically realistic examples.

eess.SY↗

arXiv2024

Computationally Efficient Sampling-Based Algorithm for Stability Analysis of Nonlinear Systems

For complex nonlinear systems, it is challenging to design algorithms that are fast, scalable, and give an accurate approximation of the stability region. This paper proposes a sampling-based approach to address these challenges. By extending the parametrization of quadratic Lyapunov functions with the system dynamics and formulating an $\ell_1$ optimization to maximize the invariant set over a grid of the state space, we arrive at a computationally efficient algorithm that estimates the domain of attraction (DOA) of nonlinear systems accurately by using only linear programming. The scalability of the Lyapunov function synthesis is further improved by combining the algorithm with ADMM-based parallelization. To resolve the inherent approximative nature of grid-based techniques, a small-scale nonlinear optimization is proposed. The performance of the algorithm is evaluated and compared to state-of-the-art solutions on several numerical examples.

eess.SY↗

arXiv2024

Learning Reduced-Order Linear Parameter-Varying Models of Nonlinear Systems

In this paper, we consider the learning of a Reduced-Order Linear Parameter-Varying Model (ROLPVM) of a nonlinear dynamical system based on data. This is achieved by a two-step procedure. In the first step, we learn a projection to a lower dimensional state-space. In step two, an LPV model is learned on the reduced-order state-space using a novel, efficient parameterization in terms of neural networks. The improved modeling accuracy of the method compared to an existing method is demonstrated by simulation examples.

eess.SY↗

arXiv2024

Physics-Guided State-Space Model Augmentation Using Weighted Regularized Neural Networks

Physics-guided neural networks (PGNN) is an effective tool that combines the benefits of data-driven modeling with the interpretability and generalization of underlying physical information. However, for a classical PGNN, the penalization of the physics-guided part is at the output level, which leads to a conservative result as systems with highly similar state-transition functions, i.e. only slight differences in parameters, can have significantly different time-series outputs. Furthermore, the classical PGNN cost function regularizes the model estimate over the entire state space with a constant trade-off hyperparameter. In this paper, we introduce a novel model augmentation strategy for nonlinear state-space model identification based on PGNN, using a weighted function regularization (W-PGNN). The proposed approach can efficiently augment the prior physics-based state-space models based on measurement data. A new weighted regularization term is added to the cost function to penalize the difference between the state and output function of the baseline physics-based and final identified model. This ensures the estimated model follows the baseline physics model functions in regions where the data has low information content, while placing greater trust in the data when a high informativity is present. The effectiveness of the proposed strategy over the current PGNN method is demonstrated on a benchmark example.

eess.SY↗

arXiv2024

State Derivative Normalization for Continuous-Time Deep Neural Networks

The importance of proper data normalization for deep neural networks is well known. However, in continuous-time state-space model estimation, it has been observed that improper normalization of either the hidden state or hidden state derivative of the model estimate, or even of the time interval can lead to numerical and optimization challenges with deep learning based methods. This results in a reduced model quality. In this contribution, we show that these three normalization tasks are inherently coupled. Due to the existence of this coupling, we propose a solution to all three normalization challenges by introducing a normalization constant at the state derivative level. We show that the appropriate choice of the normalization constant is related to the dynamics of the to-be-identified system and we derive multiple methods of obtaining an effective normalization constant. We compare and discuss all the normalization strategies on a benchmark problem based on experimental data from a cascaded tanks system and compare our results with other methods of the identification literature.

eess.SY↗

arXiv2024

Meta-State-Space Learning: An Identification Approach for Stochastic Dynamical Systems

Available methods for identification of stochastic dynamical systems from input-output data generally impose restricting structural assumptions on either the noise structure in the data-generating system or the possible state probability distributions. In this paper, we introduce a novel identification method of such systems, which results in a dynamical model that is able to produce the time-varying output distribution accurately without taking restrictive assumptions on the data-generating process. The method is formulated by first deriving a novel and exact representation of a wide class of nonlinear stochastic systems in a so-called meta-state-space form, where the meta-state can be interpreted as a parameter vector of a state probability function space parameterization. As the resulting representation of the meta-state dynamics is deterministic, we can capture the stochastic system based on a deterministic model, which is highly attractive for identification. The meta-state-space representation often involves unknown and heavily nonlinear functions, hence, we propose an Artificial Neural Network (ANN)-based identification method capable of efficiently learning nonlinear meta-state-space models. We demonstrate that the proposed identification method can obtain models with a log-likelihood close to the theoretical limit even for highly nonlinear, highly stochastic systems.

eess.SY↗

arXiv2024

Direct data-driven control with signal temporal logic specifications

Most control synthesis methods under temporal logic properties require a model of the system, however, identifying such a model can be a challenging task. In this work, we develop a direct data-driven control synthesis method for temporal logic specifications, which does not require this explicit modeling step, capable of providing certificates for the general class of linear systems. After collecting a single sequence of input-output data from the system, we construct a data-driven characterization of the behavior. Using this characterization, we synthesize a controller, such that the controlled system satisfies a (possibly unbounded) temporal logic specification. The underlying optimization problem is solved by mixed-integer linear programming. We demonstrate the applicability of the results through simulation examples.

eess.SY↗

arXiv2024

On the reduction of Linear Parameter-Varying State-Space models

This paper presents an overview and comparative study of the state of the art in State-Order Reduction (SOR) and Scheduling Dimension Reduction (SDR) for Linear Parameter-Varying (LPV) State-Space (SS) models, comparing and benchmarking their capabilities, limitations and performance. The use case chosen for these studies is an interconnected network of nonlinear coupled mass spring damper systems with three different configurations, where some spring coefficients are described by arbitrary user-defined static nonlinear functions. For SOR, the following methods are compared: Linear Time-Invariant (LTI), LPV and LFR-based balanced reductions, moment matching and parameter-varying oblique projection. For SDR, the following methods are compared: Principal Component Analysis (PCA), trajectory PCA, Kernel PCA and LTI balanced truncation, autoencoders and deep neural network. The comparison reveals the most suitable reduction methods for the different benchmark configurations, from which we provide use case SOR and SDR guidelines that can be used to choose the best reduction method for a given LPV-SS model.

eess.SY↗

arXiv2024

Autonomous Hook-Based Grasping and Transportation with Quadcopters

Payload grasping and transportation with quadcopters is an active research area that has rapidly developed over the last decade. To grasp a payload without human interaction, most state-of-the-art approaches apply robotic arms that are attached to the quadcopter body. However, due to the large weight and power consumption of these aerial manipulators, their agility and flight time are limited. This paper proposes a motion control and planning method for transportation with a lightweight, passive manipulator structure that consists of a hook attached to a quadrotor using a 1 DoF revolute joint. To perform payload grasping, transportation, and release, first, time-optimal reference trajectories are designed through specific waypoints to ensure the fast and reliable execution of the tasks. Then, a two-stage motion control approach is developed based on a robust geometric controller for precise and reliable reference tracking and a linear--quadratic payload regulator for rapid setpoint stabilization of the payload swing. Furthermore, stability of the closed-loop system is mathematically proven to give safety guarantee for its operation. The proposed control architecture and design are evaluated in a high-fidelity physical simulator, and also in real flight experiments, using a custom-made quadrotor--hook manipulator platform.

cs.RO↗

arXiv2024

Unconstrained Parameterization of Stable LPV Input-Output Models: with Application to System Identification

Ensuring stability of discrete-time (DT) linear parameter-varying (LPV) input-output (IO) models estimated via system identification methods is a challenging problem as known stability constraints can only be numerically verified, e.g., through solving Linear Matrix Inequalities. In this paper, an unconstrained DT-LPV-IO parameterization is developed which gives a stable model for any choice of model parameters. To achieve this, it is shown that all quadratically stable DT-LPV-IO models can be generated by a mapping of transformed coefficient functions that are constrained to the unit ball, i.e., a small-gain condition. The unit ball is then reparameterized through a Cayley transformation, resulting in an unconstrained parameterization of all quadratically stable DT-LPV-IO models. As a special case, an unconstrained parameterization of all stable DT linear time-invariant transfer functions is obtained. Identification using the stable DT-LPV-IO model with neural network coefficient functions is demonstrated on a simulation example of a position-varying mass-damper-spring system.

eess.SY↗