arXiv subjects

Roland Tóth

Publications and source records attributed to Roland Tóth.

At least 37 records · Page 2Linked to original sources

arXiv2025

Computing the Hard Scaled Relative Graph of LTI Systems

Scaled Relative Graphs (SRGs) provide a novel graphical frequency-domain method for the analysis of nonlinear systems, where Linear Time-Invariant (LTI) systems are the fundamental building block. To analyze feedback loops with unstable LTI components, the hard SRG is required, since it aptly captures the input/output behavior on the extended $L_2$ space. In this paper, we develop a systematic computational method to exactly compute the hard SRG of LTI systems, which may be unstable and contain integrators. We also study its connection to the Nyquist criterion, including the multivariable case, and demonstrate our method on several examples.

eess.SY↗

arXiv2025

Gaussian-Process-based Adaptive Tracking Control with Dynamic Active Learning for Autonomous Ground Vehicles

This article proposes an active-learning-based adaptive trajectory tracking control method for autonomous ground vehicles to compensate for modeling errors and unmodeled dynamics. The nominal vehicle model is decoupled into lateral and longitudinal subsystems, which are augmented with online Gaussian Processes (GPs), using measurement data. The estimated mean functions of the GPs are used to construct a feedback compensator, which, together with an LPV state feedback controller designed for the nominal system, gives the adaptive control structure. To assist exploration of the dynamics, the paper proposes a new, dynamic active learning method to collect the most informative samples to accelerate the training process. To analyze the performance of the overall learning tool-chain provided controller, a novel iterative, counterexample-based algorithm is proposed for calculating the induced L2 gain between the reference trajectory and the tracking error. The analysis can be executed for a set of possible realizations of the to-be-controlled system, giving robust performance certificate of the learning method under variation of the vehicle dynamics. The efficiency of the proposed control approach is shown on a high-fidelity physics simulator and in real experiments using a 1/10 scale F1TENTH electric car.

eess.SY↗

arXiv2025

A Linear Parameter-Varying Approach to Data Predictive Control

By means of the linear parameter-varying (LPV) Fundamental Lemma, we derive novel data-driven predictive control (DPC) methods for LPV systems. In particular, we present output-feedback and state-feedback-based LPV-DPC methods with terminal ingredients, which guarantee exponential stability and recursive feasibility. We provide methods for the data-based computation of these terminal ingredients. Furthermore, an in-depth analysis of the application and implementation aspects of the LPV-DPC schemes is given, including application for nonlinear systems and handling noisy data. We compare and demonstrate the performance of the proposed methods in a detailed simulation example involving a nonlinear unbalanced disc system.

eess.SY↗

arXiv2025

Direct data-driven interpolation and approximation of linear parameter-varying system trajectories

We consider the problem of estimating missing values in trajectories of linear parameter-varying (LPV) systems. We solve this interpolation problem for the class of shifted-affine LPV systems. Conditions for the existence and uniqueness of solutions are given and a direct data-driven algorithm for its computation is presented, i.e., the data-generating system is not given by a parametric model but is implicitly specified by data. We illustrate the applicability of the proposed solution on illustrative examples of a mass-spring-damper system with exogenous and endogenous parameter variation.

eess.SY↗

arXiv2025

Nonlinear Bandwidth and Bode Diagrams based on Scaled Relative Graphs

Scaled Relative Graphs (SRGs) provide a novel graphical frequency-domain method for the analysis of Nonlinear (NL) systems. In this paper, we restrict the SRG to particular input spaces to compute frequency-dependent incremental gain bounds for nonlinear systems. This leads to a NL generalization of the Bode diagram, where the sinusoidal, harmonic, and subharmonic inputs are considered separately. When applied to the analysis of the NL loop transfer and sensitivity, we define a notion of bandwidth for both the open-loop and closed-loop, compatible with the Linear Time-Invariant (LTI) definitions. We illustrate the power of our method on the analysis of a DC motor with a parasitic nonlinearity and verify our results in simulations.

eess.SY↗

arXiv2025

On-the-fly Surrogation for Complex Nonlinear Dynamics

High-fidelity models are essential for accurately capturing nonlinear system dynamics. However, simulation of these models is often computationally too expensive and, due to their complexity, they are not directly suitable for analysis, control design or real-time applications. Surrogate modelling techniques seek to construct simplified representations of these systems with minimal complexity, but adequate information on the dynamics given a simulation, analysis or synthesis objective at hand. Despite the widespread availability of system linearizations and the growing computational potential of autograd methods, there is no established approach that systematically exploits them to capture the underlying global nonlinear dynamics. This work proposes a novel surrogate modelling approach that can efficiently build a global representation of the dynamics on-the-fly from local system linearizations without ever explicitly computing a model. Using radial basis function interpolation and the second fundamental theorem of calculus, the surrogate model is only computed at its evaluation, enabling rapid computation for simulation and analysis and seamless incorporation of new linearization data. The efficiency and modelling capabilities of the method are demonstrated on simulation examples.

eess.SY↗

arXiv2025

Tensor-based reduction of linear parameter-varying state-space models

The Linear Parameter-Varying (LPV) framework is a powerful tool for controlling nonlinear and complex systems, but the conversion of nonlinear models into LPV forms often results in high-dimensional and overly conservative LPV models. To be able to apply control strategies, there is often a need for model reduction in order to reduce computational needs. This paper presents the first systematic approach for the joint reduction of state order and scheduling signal dimension of LPV state space models. The existing methods typically address these reductions separately. By formulating a tensorial form of LPV models with an affine dependency on the scheduling variables, we leverage tensor decomposition to find the dominant components of state and scheduling subspaces. We extend the common Petrov-Galerkin projection approach to LPV framework by adding a scheduling projection. This extension enables the joint reduction. To find suitable subspaces for the extended Petrov-Galerkin projection, we have developed two different methods: tensor-based LPV moment matching, and an approach through Proper Orthogonal Decomposition. Advantages of the proposed methods are demonstrated on two different series-interconnected mass-spring-damper systems with nonlinear springs: one primarily used for comparison with other methods and a more elaborate higher-order model designed to assess scalability.

eess.SY↗

arXiv2025

Scaled Relative Graph Analysis of General Interconnections of SISO Nonlinear Systems

Scaled Relative Graphs (SRGs) provide a novel graphical frequency-domain method for the analysis of nonlinear systems. However, we show that the current SRG analysis suffers from a pitfall that limits its applicability in analyzing practical nonlinear systems. We overcome this pitfall by introducing a novel reformulation of the SRG of a linear time-invariant operator and combining the SRG with the Nyquist criterion. The result is a theorem that can be used to assess stability and $L_2$-gain performance for general interconnections of nonlinear dynamic systems. We provide practical calculation results for canonical interconnections and apply our result to Lur'e systems to obtain a generalization of the celebrated circle criterion, which deals with broader class of nonlinearities, and we derive (incremental) $L_2$-gain performance bounds. We illustrate the power of the new approach on the analysis of several examples.

eess.SY↗

arXiv2025

Exact Finite Koopman Embedding of Block-Oriented Polynomial Systems

The challenge of finding exact and finite-dimensional Koopman embeddings of nonlinear systems has been largely circumvented by employing data-driven techniques to learn models of different complexities (e.g., linear, bilinear, input affine). Although these models may provide good accuracy, selecting the model structure and dimension is still ad-hoc and it is difficult to quantify the error that is introduced. In contrast to the general trend of data-driven learning, in this paper, we develop a systematic technique for nonlinear systems that produces a finite-dimensional and exact embedding. If the nonlinear system is represented as a network of series and parallel linear and nonlinear (polynomial) blocks, one can derive an associated Koopman model that has constant state and output matrices and the input influence is polynomial. Furthermore, if the linear blocks do not have feedthrough, the Koopman representation simplifies to a bilinear model.

eess.SY↗

arXiv2025

A behavioral approach for LPV data-driven representations

In this paper, we present a data-driven representation for linear parameter-varying (LPV) systems, which can be used for direct data-driven analysis and control of such systems. Specifically, we use the behavioral approach to develop a data-driven representation of the finite-horizon behavior of LPV systems for which there exists a kernel representation with shifted-affine scheduling dependence. Moreover, we provide a necessary and sufficient rank-based test on the available data that concludes whether the data fully represents the finite-horizon LPV behavior. Using the proposed data-driven representation, we also solve the data-driven simulation problem for LPV systems. Through multiple examples, we demonstrate that the results in this paper allow us to formulate a novel set of direct data-driven analysis and control methods for LPV systems, which are also applicable for LPV embeddings of nonlinear systems.

eess.SY↗

arXiv2025

Reset Controller Analysis and Design for Unstable Linear Plants using Scaled Relative Graphs

In this technical communique, we develop a graphical design procedure for reset controllers for unstable LTI plants based on recent developments on Scaled Relative Graph analysis, yielding an $L_2$-gain performance bound. The stabilizing controller consists of a second order reset element in parallel with a proportional gain. The proposed method goes beyond existing approaches that are limited to stable systems only, providing a well-applicable approach to design problems in practice where the plant is unstable.

eess.SY↗

arXiv2025

On Space-Filling Input Design for Nonlinear Dynamic Model Learning: A Gaussian Process Approach

While optimal input design for linear systems has been well-established, no systematic approach exists for nonlinear systems where robustness to extrapolation/interpolation errors is prioritized over minimizing estimated parameter variance. To address this issue, we develop a novel space-filling input design strategy for nonlinear system identification that ensures data coverage of a given region of interest. By placing a Gaussian Process (GP) prior on the joint input-state space, the proposed strategy leverages the GP posterior variance to construct a cost function that promotes space-filling input design. Consequently, this enables maximization of the coverage in the region of interest, thereby facilitating the generation of informative datasets. Furthermore, we theoretically prove that minimization of the cost function implies the space-filling property of the obtained data. Effectiveness of the proposed strategy is demonstrated on both an academic and a mass-spring-damper example, highlighting its potential practical impact on efficient exploration of the dynamics of nonlinear systems.

eess.SY↗

arXiv2025

Hook-Based Aerial Payload Grasping from a Moving Platform

This paper investigates payload grasping from a moving platform using a hook-equipped aerial manipulator. First, a computationally efficient trajectory optimization based on complementarity constraints is proposed to determine the optimal grasping time. To enable application in complex, dynamically changing environments, the future motion of the payload is predicted using a physics simulator-based model. The success of payload grasping under model uncertainties and external disturbances is formally verified through a robustness analysis method based on integral quadratic constraints. The proposed algorithms are evaluated in a high-fidelity physical simulator, and in real flight experiments using a custom-designed aerial manipulator platform.

cs.RO↗

arXiv2025

Orthogonal projection-based regularization for efficient model augmentation

Deep-learning-based nonlinear system identification has shown the ability to produce reliable and highly accurate models in practice. However, these black-box models lack physical interpretability, and a considerable part of the learning effort is often spent on capturing already expected/known behavior of the system, that can be accurately described by first-principles laws of physics. A potential solution is to directly integrate such prior physical knowledge into the model structure, combining the strengths of physics-based modeling and deep-learning-based identification. The most common approach is to use an additive model augmentation structure, where the physics-based and the machine-learning (ML) components are connected in parallel, i.e., additively. However, such models are overparametrized, training them is challenging, potentially causing the physics-based part to lose interpretability. To overcome this challenge, this paper proposes an orthogonal projection-based regularization technique to enhance parameter learning and even model accuracy in learning-based augmentation of nonlinear baseline models.

cs.LG↗

arXiv2025

Efficient identification of linear, parameter-varying, and nonlinear systems with noise models

We present a general system identification procedure capable of estimating of a broad spectrum of state-space dynamical models, including linear time-invariant (LTI), linear parameter-varying} (LPV), and nonlinear (NL) dynamics, along with rather general classes of noise models. Similar to the LTI case, we show that for this general class of model structures, including the NL case, the model dynamics can be separated into a deterministic process and a stochastic noise part, allowing to seamlessly tune the complexity of the combined model both in terms of nonlinearity and noise modeling. We parameterize the involved nonlinear functional relations by means of artificial neural-networks (ANNs), although alternative parametric nonlinear mappings can also be used. To estimate the resulting model structures, we optimize a prediction-error-based criterion using an efficient combination of a constrained quasi-Newton approach and automatic differentiation, achieving training times in the order of seconds compared to existing state-of-the-art ANN methods which may require hours for models of similar complexity. We formally establish the consistency guarantees for the proposed approach and demonstrate its superior estimation accuracy and computational efficiency on several benchmark LTI, LPV, and NL system identification problems.

math.OC↗

arXiv2025

Scaled Relative Graph Analysis of Lur'e Systems and the Generalized Circle Criterion

eess.SY↗

arXiv2025

Learning-based model augmentation with LFRs

Nonlinear system identification (NL-SI) has proven to be effective in obtaining accurate models for highly complex systems. In particular, recent encoder-based methods for artificial neural networks state-space (ANN-SS) models have achieved state-of-the-art performance on various benchmarks, while offering consistency and computational efficiency. Inclusion of prior knowledge of the system can be exploited to increase (i) estimation speed, (ii) accuracy, and (iii) interpretability of the resulting models. This paper proposes an encoder-based model augmentation method that incorporates prior knowledge from first-principles (FP) models. We introduce a novel \linear-fractional-representation (LFR) model structure that allows for the unified representation of various augmentation structures including the ones that are commonly used in the literature, and an identification algorithm for estimating the proposed structure together with appropriate initialization methods. The performance and generalization capabilities of the proposed method are demonstrated in a hardening mass-spring-damper simulation.

eess.SY↗

arXiv2025

A Direct State-Space Realization of Discrete-Time Linear Parameter-Varying Input-Output Models

A minimal state-space (SS) realization of an identified linear parameter-varying (LPV) input-output (IO) model usually introduces dynamic and nonlinear dependency of the state-space coefficient functions, complicating stability analysis and controller synthesis. The aim of this paper is to introduce and analyze a direct SS realization of this IO model that avoids this nonlinear and dynamic dependency, at the cost of introducing a nonminimal state. It is shown that this direct SS realization 1) is reachable under a coprimeness condition on the coefficient functions of the IO model and a well-posedness condition on the model order, and 2) is never observable but that the unobservable directions converge to zero in a finite amount of steps, i.e., that the realization is reconstructible. The derived results are illustrated through numerical examples in both the LPV and LTI case.

eess.SY↗