arXiv subjects

Romain Laugier

Publications and source records attributed to Romain Laugier.

At least 19 recordsLinked to original sources

arXiv2026

Using VLTI/GRAVITY+ to determine the identity of a third planet candidate in the PDS 70 system

Detections of protoplanets are rare and protoplanetary disk features mischaracterized as planets are common. PDS 70 is one of only two stars known to host multiple confirmed protoplanets, PDS 70 b and c, and repeat detections of a third point-like source in the system suggest the presence of third inner planet. However, previous observations of this third source are insufficient to distinguish whether it is a planet or a concentrated dust clump in Keplerian motion. Our observations with VLTI/GRAVITY+ did not re-detect this point-like source, suggesting that it is, in fact, a dust clump and not a planet. These observations demonstrate how the angular resolving power of VLTI/GRAVITY+ can be used to distinguish between protoplanets and protoplanetary disk features.

astro-ph.EP↗

arXiv2026

Exploring Exoplanets with Interferometry

(Extract from the Executive Summary) Humanity stands at the threshold of answering one of its most profound questions: Does life exist beyond Earth? Ongoing and upcoming space missions, together with powerful ground-based instruments, have prepared the way for a transformational next step - the detailed characterization of Earth analogs orbiting Sun-like and other stars and the search for atmospheric biosignatures that may indicate life. Within this context, the European Space Agency's Voyage 2050 process has identified the direct detection of thermal emission from temperate terrestrial exoplanets in the mid-infrared (mid-IR) as a top scientific priority. The Large Interferometer For Exoplanets (LIFE) - a space-based, mid-IR nulling interferometer - is designed to meet this goal. LIFE will be capable of detecting climate-relevant gases such as CO$_2$ and H$_2$O, identifying classical biosignatures like O$_3$ and CH$_4$, and probing additional, non-classical biosignatures. It will also provide key data for determining planetary radius, albedo, and temperature, which are essential for assessing habitability. In parallel, the U.S. National Academy has recommended a complementary mission now called the Habitable Worlds Observatory (HWO) - a ~6-meter space telescope equipped with advanced coronagraphs to suppress starlight by a factor of ~10$^{10}$ across the visible and possibly into the near-infrared and near-ultraviolet. Together, LIFE and HWO offer synergistic capabilities, enabling a comprehensive and robust assessment of the prevalence of life-bearing exoplanets in our galactic neighbourhood - a first in human history. By uniting an international and interdisciplinary community of scientists and engineers, LIFE offers a credible pathway toward the direct detection and characterization of potentially habitable - and even inhabited - worlds.

astro-ph.IM↗

arXiv2026

A preliminary exploration of the effects of baseline length for the LIFE space mission

By aiming to find and characterise dozens of habitable exoplanets through the technique of nulling interferometry, the LIFE space mission will produce transformational science. One of the key parameters for such an interferometric mission is the nulling baseline length - the distance between nulled apertures, which past studies have assumed to be 10-100m. Advances in planet occurrence statistics and simulation tools allow us now to revisit this key assumption with significantly more detail, particularly with the intention to reduce the range of baselines considered due to mission implementation concerns. We utilise the LIFEsim mission simulator along with revised mathematical tools to identify whether the range of baselines could be reduced without significantly affecting planet yield and fringe tracking performance. Along the way, we also determine a new astrophysically motivated technique for choosing which baselines are optimal for a given science target. We find that indeed, LIFE could utilise a considerably shorter range of baselines, such as 25-80m, or even discrete baselines without much (<10%) loss of performance. Nevertheless, careful trade-offs between performance and implementation simplification must be made, especially considering any spectral weighting that may be required by the scientific goals, and the potential loss of target-specific baseline optimisation.

astro-ph.IM↗

arXiv2026

Continuing to Advance European High Contrast Imaging Research and Development towards HWO and LIFE

The European Research and Development for Space based High Contrast Imaging II Workshop, held at MPIA in May 2025, advanced Europe strategic coordination in support of future exoplanet imaging missions such as the Habitable Worlds Observatory and the Large Interferometer for Exoplanets mission. Building on the first 2024 workshop, this meeting defined concrete priorities across eight technical areas, including wavefront sensing, coronagraphs, post processing, nulling interferometry, deformable mirrors, detectors, and telescope design. Discussions emphasized Europe strengths in adaptive optics, ground-based facilities, and interferometry, while identifying key gaps, particularly the need for a dedicated European vacuum testbed for high contrast imaging. The community highlighted near infrared or UV coronagraphy as a promising domain for European leadership and called for joint development of advanced data reduction algorithms, detectors, and cross-mission coordination with HWO and LIFE. The workshop outcomes establish a collaborative roadmap to strengthen Europe technological readiness, foster agency partnerships, and ensure its continued leadership in the next generation of space-based exoplanet exploration.

astro-ph.IM↗

arXiv2025

Robust Data Interpretation for Perturbed Nulling Interferometers via Proper Handling of Correlated Errors

The detection and atmospheric characterization of potentially habitable, temperate terrestrial exoplanets using a space-based mid-infrared nulling interferometer is a major goal of contemporary astrophysics. A central part of the analysis of such an instrument are correlated errors arising from perturbations in the system. While previous studies have often treated their effects in a limited manner, we aim to treat them comprehensively here and argue that data whitening based on the covariance of these errors is a suitable method to mitigate their impact. We present a framework that quantitatively connects instrumental perturbations to performance metrics and develop two computational tools to support our analysis: PHRINGE, for the generation of synthetic nulling data, and LIFEsimMC, a new Monte Carlo-based end-to-end simulator for the Large Interferometer For Exoplanets (LIFE). Applying our framework to a reference observation of an Earth twin orbiting a Sun twin at 10 pc, we find that whitening is not only essential for a correct interpretation of the detection metric used in hypothesis testing, but also improves the estimates of the planetary properties. Moreover, our approach enables an estimation of the spectral covariance of the extracted planetary spectra, providing valuable additional input for future atmospheric retrievals. We therefore recommend incorporating the framework into performance assessments and requirement derivations for future nulling interferometers.

astro-ph.IM↗

arXiv2025

Consequences of Non-Gaussian Instrumental Noise in Perturbed Nulling Interferometers

With the astrophysics community working towards the first observations and characterizations of Earth-like exoplanets, interest in space-based nulling interferometry has been renewed. This technique promises unique scientific and technical advantages by enabling direct mid-infrared observations. However, concept studies of nulling interferometers often overlook the impact of systematic noise caused by instrument perturbations. Earlier research introduced analytical and numerical models to address instrumental noise and, building on these results, we reproduce key simulations and report that the noise in the differential output of nulling interferometers follows a non-Gaussian distribution. The presence of non-Gaussian noise challenges the validity of classical hypothesis tests in detection performance estimates, as their reliance on Gaussian assumptions leads to overconfidence in detection thresholds. For the first time, we derive the true noise distribution of the differential output of a dual Bracewell nulling interferometer, demonstrating that it follows iterative convolutions of Bessel functions. Understanding this noise distribution enables a refined formulation of hypothesis testing in nulling interferometry, leading to a semi-analytical prediction of detection performance. This computationally efficient instrument model, implemented in a publicly available codebase, is designed for integration into science yield predictions for nulling interferometry mission concepts. It will play a key role in refining key mission parameters for the Large Interferometer For Exoplanets (LIFE).

astro-ph.IM↗

arXiv2025

GRIP: a generic data reduction package for nulling interferometry

Nulling interferometry is a powerful observing technique to study exoplanets and circumstellar dust at separations too small for direct imaging with single-dish telescopes. With recent photonics developments and the near-future ground-based instrumental projects, it bears the potential to detect young giant planets near the snow lines of their host stars. The observable quantity of a nulling interferometer is called the null depth, its precise measurement and calibration remain challenging against instrument and atmospheric noise. Null self-calibration is a method aiming to model the statistical distribution of the nulled signal. It has proven to be more sensitive and accurate than average-based data reduction methods in nulling interferometry. The variety of existing and upcoming of nullers raises the issue of consistency of the calibration process, structure of the data and the ability to reduce archived data on the long term. It has also led to many different implementations of the Null self-calibration method. In this article, we introduce GRIP: the first open-source toolbox to reduce nulling data with enhanced statistical self-calibration methods from any nulling interferometric instrument within a single and consistent framework. Astrophysical results show good consistency with two published GLINT and LBTI datasets and confirm nulling precision down to a few 10$^{-4}$.

astro-ph.IM↗

arXiv2025

Photobombing for the Large Interferometer For Exoplanets (LIFE). A new criterion for target confusion and application to a MIR rotating nulling interferometer

One of the primary objectives in modern astronomy is to discover and study planets with characteristics similar to Earth. This pursuit involves analyzing the spectra of exoplanets and searching for biosignatures. Contamination of spectra by nearby objects (e.g., other planets and moons in the same system) is a significant concern and must be addressed for future exo-Earth searching missions. The aim is to estimate, for habitable planets, the probability of spectral contamination by other planets within the same star system. This investigation focuses on the Large Interferometer for Exoplanets (LIFE). Since the Rayleigh criterion is inapplicable to interferometers such as those proposed for LIFE, we present new criteria based on the principle of parsimony, which take into account two types of issues: contamination or blending of point sources, and cancellation of point sources due to destructive interference. We define a new spatial resolution metric associated with contamination or cancellation that generalizes to a broader family of observing instruments. In the current baseline design, LIFE is an X-array architecture nulling interferometer. Our investigation reveals that its transmission map introduces the potential for two point sources to appear as one, even if they do not appear in close proximity. We find that LIFE has a spatial resolution comparable to that of a traditional telescope with a diameter of $D = 600\,\text{m}$, observing at $\lambda = 4 \,\mu\text{m}$. Our survey of a star system population shows that, out of 73.4 expected habitable planets detected, 71.3 are not contaminated on average.

astro-ph.EP↗

arXiv2024

Large Interferometer For Exoplanets (LIFE). XIV. Finding terrestrial protoplanets in the galactic neighborhood

The increased brightness temperature of young rocky protoplanets during their magma ocean epoch makes them potentially amenable to atmospheric characterization to distances from the solar system far greater than thermally equilibrated terrestrial exoplanets, offering observational opportunities for unique insights into the origin of secondary atmospheres and the near surface conditions of prebiotic environments. The Large Interferometer For Exoplanets (LIFE) mission will employ a space-based mid-infrared nulling interferometer to directly measure the thermal emission of terrestrial exoplanets. Here, we seek to assess the capabilities of various instrumental design choices of the LIFE mission concept for the detection of cooling protoplanets with transient high-temperature magma ocean atmospheres, in young stellar associations in particular. Using the LIFE mission instrument simulator (LIFEsim) we assess how specific instrumental parameters and design choices, such as wavelength coverage, aperture diameter, and photon throughput, facilitate or disadvantage the detection of protoplanets. We focus on the observational sensitivities of distance to the observed planetary system, protoplanet brightness temperature using a blackbody assumption, and orbital distance of the potential protoplanets around both G- and M-dwarf stars. Our simulations suggest that LIFE will be able to detect (S/N $\geq$ 7) hot protoplanets in young stellar associations up to distances of $\approx$100 pc from the solar system for reasonable integration times (up to $\sim$hours). Detection of an Earth-sized protoplanet orbiting a solar-sized host star at 1 AU requires less than 30 minutes of integration time. M-dwarfs generally need shorter integration times. The contribution from wavelength regions $<$6 $\mu$m is important for decreasing the detection threshold and discriminating emission temperatures.

astro-ph.EP↗

arXiv2024

First Resolution of Microlensed Images of a Binary-Lens Event

We resolve the multiple images of the binary-lens microlensing event ASASSN-22av using the GRAVITY instrument of the Very Large Telescope Interferometer (VLTI). The light curves show weak binary-lens perturbations, complicating the analysis, but the joint modeling with the VLTI data breaks several degeneracies, arriving at a strongly favored solution. Thanks to precise measurements of angular Einstein radius \theta_E = 0.724 +/- 0.002 mas and microlens parallax, we determine that the lens system consists of two M dwarfs with masses of M_1 = 0.258 +/- 0.008 M_sun and M_2 = 0.130 +/- 0.007 M_sun, a projected separation of r_\perp = 6.83 +/- 0.31 au and a distance of D_L = 2.29 +/- 0.08 kpc. The successful VLTI observations of ASASSN-22av open up a new path for studying intermediate-separation (i.e., a few astronomical units) stellar-mass binaries, including those containing dark compact objects such as neutron stars and stellar-mass black holes.

astro-ph.SR↗

arXiv2024

VLTI Unit Telescope coud\'e train vibration control upgrade for GRAVITY+

Scaling up interferometry to 8m collectors should smooth-out the optical piston perturbations and allow a slow fringe tracker to obtain high precision correction on faint targets. In practice, the GRAVITY fringe tracker still observes high frequency OPD components that limit the exposure time, its precision and limiting magnitude. Perturbations seem to come from mechanical vibrations in the train of mirrors. As part of the GRAVITY+ efforts, accelerometers were added to all the mirrors of the coud\'e train to compensate in real-time the optical path using the main delay lines. We show their effectiveness on vibrations peaks between 40 and 200Hz and outline prospects for the upgrade of the deformable mirrors and the beam-compressor differential delay lines.

astro-ph.IM↗

arXiv2024

Asgard/NOTT: water vapor and CO$_2$ atmospheric dispersion compensation system

To leverage the angular resolution of interferometry at high contrast, one must employ specialized beam-combiners called interferometric nullers. Nullers discard part of the astrophysical information to optimize the recording of light present in the dark fringe of the central source. Asgard/NOTT will deploy a beam-combination scheme offering good instrumental noise rejection when phased appropriately, but for which information is degenerate on the outputs, prompting a dedicated tuning strategy using the science detector. The dispersive effect of water vapor can be corrected with prisms forming a variable thickness of glass. But observations in the L band suffer from an additional and important chromatic effect due to longitudinal atmospheric dispersion coming from a resonance of CO2 at 4.3 micron. To compensate for this effect efficiently, a novel type of compensation device will be deployed leveraging a gas cell of variable length at ambient pressure. After reviewing the impact of water vapor and CO2, we present the design of this atmospheric dispersion compensation device and describe a strategy to maintain this tuning on-sky.

astro-ph.IM↗

arXiv2024

L-band nulling interferometry at the VLTI with Asgard/NOTT: status and plans

NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting exozodiacal dust that could obscure Earth-like planets. In 2023-2024, the final warm optics have been procured and assembled in a new laboratory at KU Leuven. First fringes and null measurements were obtained using a Gallium Lanthanum Sulfide (GLS) photonic chip that was also tested at cryogenic temperatures. In this paper, we present an overall update of the NOTT project with a particular focus on the cold mechanical design, the first results in the laboratory with the final NOTT warm optics, and the ongoing Asgard integration activities. We also report on other ongoing activities such as the characterization of the photonic chip (GLS, LiNbO3, SiO), the development of the exoplanet science case, the design of the dispersion control module, and the progress with the self-calibration data reduction software.

astro-ph.IM↗

arXiv2024

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.

astro-ph.IM↗

arXiv2024

Generic data reduction for nulling interferometry package: the grip of a single data reduction package on all the nulling interferometers

Nulling interferometry is a powerful observing technique to reach exoplanets and circumstellar dust at separations too small for direct imaging with single-dish telescopes and too large for indirect methods. With near-future instrumentation, it bears the potential to detect young, hot planets near the snow lines of their host stars. A future space mission could detect and characterize a large number of rocky, habitable-zone planets around nearby stars at thermal-infrared wavelengths. The null self-calibration is a method aiming at modelling the statistical distribution of the nulled signal. It has proven to be more sensitive and accurate than average-based data reduction methods in nulling interferometry. This statistical approach opens the possibility of designing a GPU-based Python package to reduce the data from any of these instruments, by simply providing the data and a simulator of the instrument. GRIP is a toolbox to reduce nulling and interferometric data based on the statistical self-calibration method. In this article, we present the main features of GRIP as well as applications on real data.

astro-ph.IM↗

arXiv2024

Asgard/NOTT: L-band nulling interferometry at the VLTI. II. Warm optical design and injection system

Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$μ$m, where the contrast between exoplanets and their host stars is advantageous. The breakthrough is the use of a photonic beam combiner, which only recently allowed the required theoretical raw contrast of $10^{-3}$ in this spectral range. Nulling interferometry observations of exoplanets also require a high degree of balancing between the four pupils of the VLTI in terms of intensity, phase, and polarization. The injection into the beam combiner and the requirements of nulling interferometry are driving the design of the warm optics and the injection system. The optical design up to the beam combiner is presented. It offers a technical solution to efficiently couple the light from the VLTI into the beam combiner. During the coupling, the objective is to limit throughput losses to 5% of the best expected efficiency for the injection. To achieve this, a list of different loss sources is considered with their respective impact on the injection efficiency. Solutions are also proposed to meet the requirements on beam balancing for intensity, phase, and polarization. The different properties of the design are listed, including the optics used, their alignment and tolerances, and their impact on the instrumental performances in terms of throughput and null depth. The performance evaluation gives an expected throughput loss of less than <6.4% of the best efficiency for the injection and a null depth of $\sim2.10^{-3}$, mainly from optical path delay errors outside the scope of this work.

astro-ph.IM↗

arXiv2024

Coronagraphic Data Post-processing Using Projections on Instrumental Modes

Directly observing exoplanets with coronagraphs is impeded by the presence of speckles from aberrations in the optical path, which can be mitigated in hardware with wavefront control as well as in post-processing. This work explores using an instrument model in post-processing to separate astrophysical signals from residual aberrations in coronagraphic data. The effect of wavefront error (WFE) on the coronagraphic intensity consists of a linear contribution and a quadratic contribution. When either of the terms is much larger than the other, the instrument response can be approximated by a transfer matrix mapping WFE to detector plane intensity. From this transfer matrix, a useful projection onto instrumental modes that removes the dominant error modes can be derived. We apply this projection to synthetically generated Roman Space Telescope hybrid Lyot coronagraph (HLC) data to extract "robust observables," which can be used instead of raw data for applications such as detection testing. The projection improves planet flux ratio detection limits by about 28% in the linear regime and by over a factor of 2 in the quadratic regime, illustrating that robust observables can increase sensitivity to astrophysical signals and improve the scientific yield from coronagraphic data. While this approach does not require additional information such as observations of reference stars or modulations of a deformable mirror, it can and should be combined with these other techniques, acting as a model-informed prior in an overall post-processing strategy.

astro-ph.IM↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗