arXiv subjects

Romain Petrov

Publications and source records attributed to Romain Petrov.

At least 19 recordsLinked to original sources

arXiv2026

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's VLTI has a history of record-breaking discoveries in astrophysics using high-angular resolution instrumentation. Its latest visitor instrument, the Asgard instrumental suite, is one key to further enhance the potential of the facility, particularly in the very near-infrared. It comprises four natively collaborating instruments: HEIMDALLR, a K-band fringe tracker, wavefront corrector and stellar interferometer in K band, with the same optics; Baldr, an H-band Zernike wavefront sensor; BIFROST, an Y-J-H-band photonic combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; and NOTT, an L-band nulling interferometer for imaging young planetary systems. Each of these instruments promise significant advances in their respective science goals that scale with their technical challenges and technology innovations. The integration of Asgard is planned in three phases. The first one (integration, commissioning of HEIMDALLR and Baldr) is successfully done. In this paper, we show an overview of the current progress of the integration of Asgard, the first results of the on-sky commissioning of HEIMDALLR and the future steps and observing policies for Asgard to serve the broader community.

astro-ph.IM↗

arXiv2026

Laboratory characterization of Hierarchical Fringe Tracking

One of the main limitations in long-baseline interferometry lies in its fringe tracking sensitivity. The challenge is therefore to maximize this sensitivity while minimizing the spreading of the signal on the detector. This is the goal at the core of the hierarchical fringe tracking (HFT) concept. We present the laboratory characterization of the $2^{nd}$ generation HFT chips operating in the near infrared (H band) for up to 4 telescopes with more linear phase and group delay estimators, allowing a strong simplification of the tracking algorithm. We show a comparison between theoretical intensity outputs for an optimized phase delay chip, and the laboratory measurements of two chips with different designs. The results do not reach the expectations but get close to them with the 10-outputs chip. Ultimately, this new chip is intended for implementation on the VLTI, CHARA or on the future Xuyi 100m-baseline Stellar Interferometer using three telescopes.

astro-ph.IM↗

arXiv2026

Using VLTI/GRAVITY+ to determine the identity of a third planet candidate in the PDS 70 system

Detections of protoplanets are rare and protoplanetary disk features mischaracterized as planets are common. PDS 70 is one of only two stars known to host multiple confirmed protoplanets, PDS 70 b and c, and repeat detections of a third point-like source in the system suggest the presence of third inner planet. However, previous observations of this third source are insufficient to distinguish whether it is a planet or a concentrated dust clump in Keplerian motion. Our observations with VLTI/GRAVITY+ did not re-detect this point-like source, suggesting that it is, in fact, a dust clump and not a planet. These observations demonstrate how the angular resolving power of VLTI/GRAVITY+ can be used to distinguish between protoplanets and protoplanetary disk features.

astro-ph.EP↗

arXiv2024

First Resolution of Microlensed Images of a Binary-Lens Event

We resolve the multiple images of the binary-lens microlensing event ASASSN-22av using the GRAVITY instrument of the Very Large Telescope Interferometer (VLTI). The light curves show weak binary-lens perturbations, complicating the analysis, but the joint modeling with the VLTI data breaks several degeneracies, arriving at a strongly favored solution. Thanks to precise measurements of angular Einstein radius θ_E = 0.724 +/- 0.002 mas and microlens parallax, we determine that the lens system consists of two M dwarfs with masses of M_1 = 0.258 +/- 0.008 M_sun and M_2 = 0.130 +/- 0.007 M_sun, a projected separation of r_\perp = 6.83 +/- 0.31 au and a distance of D_L = 2.29 +/- 0.08 kpc. The successful VLTI observations of ASASSN-22av open up a new path for studying intermediate-separation (i.e., a few astronomical units) stellar-mass binaries, including those containing dark compact objects such as neutron stars and stellar-mass black holes.

astro-ph.SR↗

arXiv2024

Asgard/NOTT: water vapor and CO$_2$ atmospheric dispersion compensation system

To leverage the angular resolution of interferometry at high contrast, one must employ specialized beam-combiners called interferometric nullers. Nullers discard part of the astrophysical information to optimize the recording of light present in the dark fringe of the central source. Asgard/NOTT will deploy a beam-combination scheme offering good instrumental noise rejection when phased appropriately, but for which information is degenerate on the outputs, prompting a dedicated tuning strategy using the science detector. The dispersive effect of water vapor can be corrected with prisms forming a variable thickness of glass. But observations in the L band suffer from an additional and important chromatic effect due to longitudinal atmospheric dispersion coming from a resonance of CO2 at 4.3 micron. To compensate for this effect efficiently, a novel type of compensation device will be deployed leveraging a gas cell of variable length at ambient pressure. After reviewing the impact of water vapor and CO2, we present the design of this atmospheric dispersion compensation device and describe a strategy to maintain this tuning on-sky.

astro-ph.IM↗

arXiv2024

JWST/NIRSpec and MIRI observations of an expanding, jet-driven bubble of warm H$_2$ in the radio galaxy 3C 326 N

The physical link between AGN activity and the suppression of star formation in their host galaxies is one of the major open questions of AGN feedback. The Spitzer space mission revealed a subset of nearby radio galaxies with unusually bright line emission from warm ($T\ge 100$ K) H$_2$, while typical star-formation tracers were exceptionally faint or undetected. We present JWST NIRSpec and MIRI IFU observations of 3C 326 N at z=0.09 and identify 19 ro-vibrational H$_2$ emission lines that probe hot ($T\sim 1000$ K) gas as well as the rotational lines of H$_2$ 0--0 S(3), S(5), and S(6) which probe most of the $2\times 10^9$ M$_\odot$ of warm H$_2$ in this galaxy. CO band heads show a stellar component consistent with a "slow-rotator", typical of a massive $3\times10^{11}$ M$_\odot$ galaxy, and provide us with a reliable redshift of $z=0.08979\pm 0.0003$. Extended line emission shows a bipolar bubble expanding through the molecular disk at velocities of up to 380 km s$^{-1}$, delineated by several bright clumps along the Northern outer rim, potentially from gas fragmentation. Throughout the disk, the H$_2$ is very broad, FWHM ~100-1300 km s$^{-1}$, and shows dual-component Gaussian line profiles. [FeII]$λ$1.644 and Pa$α$ follow the same morphology, however [NeIII]$λ$15.56 is more symmetric about the nucleus. We show that the gas, with the exception of [NeIII]$λ$15.56, is predominantly heated by shocks driven by the radio jet and that the accompanying line broadening is sufficient to suppress star formation. We also compare the rotational and ro-vibrational lines, finding that the latter can be a good proxy to the global morphology and kinematic properties of the former in strongly turbulent environments. This enables studies of turbulence in galaxies at intermediate and high redshifts while most rotational lines are redshifted out of the MIRI bandpass for $z$>1.5.

astro-ph.GA↗

arXiv2024

Chromatically modelling the parsec scale dusty structure in the centre of NGC1068

The Very Large Telescope Interferometer (VLTI) has been providing breakthrough images of the dust in the central parsecs of Active Galactic Nuclei (AGN), a key component of the AGN unification scheme and AGN host galaxy interaction. In single IR bands, the images can have multiple interpretations some of which could challenge the unification scheme. This is the case for the archetypal type 2 AGN of NGC1068. The ambiguity is reduced by multi-band temperature maps which are hindered by uncertainty in intra-band alignment. We create a chromatic model capable of simultaneously explaining the VLTI GRAVITY+MATISSE 2$μ$m-13$μ$m observations of the AGN in NGC1068. We use a simple disk and wind geometry populated with spherical black body emitters and dust obscuration to create a versatile multi-wavelength model for IR interferometric data of dusty objects. This simple geometry is capable of reproducing the K-N-band VLTI data, explains the complex single band images, and solves the alignment between bands. We find that the resulting geometry is consistent with previous studies. Compared to molecular gas emission, our model wind position angle (PA) of $22^3_2°$ is close to the mas scale outflowing CO(6-5) PA of ~33° seen with the ALMA. The equivalent 90° offset model disk PA is also consistent with the CO(6-5) disk axis of 112° as well as the mas scale disk axis from CO(2-1), CO(3-2), and HCO$^+$(4-3) of 115$\pm$5°. Furthermore, the resulting model visually resembles the equivalent achromatic image reconstructions. We conclude that the IR emitting structure surrounding the AGN can indeed be explained by the clumpy disk+wind iteration of the AGN unification scheme. Within the scheme, we find it is best explained as a type 2 and the obscuring dust chemistry is consistent with a mix of olivine silicates and 16$\pm$1% amorphous carbon.

astro-ph.GA↗

arXiv2023

The dusty heart of Circinus II. Scrutinizing the LM-band dust morphology using MATISSE

In this paper we present the first-ever $L$- and $M$-band interferometric observations of Circinus, building upon a recent $N$-band analysis. We used these observations to reconstruct images and fit Gaussian models to the $L$ and $M$ bands. Our findings reveal a thin edge-on disk whose width is marginally resolved and is the spectral continuation of the disk imaged in the $N$ band to shorter wavelengths. Additionally, we find a point-like source in the $L$ and $M$ bands that, based on the $LMN$-band spectral energy distribution fit, corresponds to the $N$-band point source. We also demonstrate that there is no trace of direct sightlines to hot dust surfaces in the circumnuclear dust structure of Circinus. By assuming the dust is present, we find that obscuration of A$_{\rm V} \gtrsim 250$ mag is necessary to reproduce the measured fluxes. Hence, the imaged disk could play the role of the obscuring "torus" in the unified scheme of active galactic nuclei. Furthermore, we explored the parameter space of the disk + hyperbolic cone radiative transfer models and identify a simple modification at the base of the cone. Adding a cluster of clumps just above the disk and inside the base of the hyperbolic cone provides a much better match to the observed temperature distribution in the central aperture. This aligns well with the radiation-driven fountain models that have recently emerged. Only the unique combination of sensitivity and spatial resolution of the VLTI allows such models to be scrutinized and constrained in detail. We plan to test the applicability of this detailed dust structure to other MATISSE-observed active galactic nuclei in the future.

astro-ph.GA↗

arXiv2022

The dusty heart of Circinus: I. Imaging the circumnuclear dust in N-band

Active galactic nuclei play a key role in the evolution of galaxies, but their inner workings and physical connection to the host are poorly understood due to a lack of angular resolution. Infrared interferometry makes it possible to resolve the circumnuclear dust in the nearby Seyfert 2 galaxy, Circinus. Previous observations have revealed complex structures and polar dust emission but interpretation was limited to simple models. MATISSE makes it possible to image these structures for the first time. We observed the Circinus Galaxy with VLTI/MATISSE, producing 150 correlated flux spectra and 100 closure phase spectra. We reconstructed images in the N-band at ~10 mas resolution. We fit blackbody functions with dust extinction to several aperture-extracted fluxes from the images to produce a temperature distribution of central dusty structures. We find significant substructure in the circumnuclear dust: central unresolved flux of ~0.5 Jy, a thin disk 1.9 pc in diameter oriented along ~45 deg,and a ~4x1.5 pc polar emission extending orthogonal to the disk. The polar emission exhibits patchiness, which we attribute to clumpy dust. Flux enhancements to the east and west of the disk are seen for the first time. We distinguish the temperature profiles of the disk and of the polar emission: the disk shows a steep temperature gradient indicative of denser material; the polar profile is flatter, indicating clumpiness and/or lower dust density. The unresolved flux is fitted with a high temperature, ~370 K. The polar dust remains warm (~200 K) out to 1.5 pc from the disk. The recovered morphology and temperature distribution resembles modeling of accretion disks with radiation-driven winds at large scales, but we placed new constraints on the subparsec dust. The subparsec features imaged here place new constraints on the physical modeling of circumnuclear dust in active galaxies.

astro-ph.GA↗

arXiv2018

The Planet Formation Imager

The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially sensitive to thermal emission from young exoplanets (and their disks) with a high spectral resolution mode to probe the kinematics of CO and H2O gas. In this paper, we give an overview of the main science goals of PFI, define a baseline PFI architecture that can achieve those goals, point at remaining technical challenges, and suggest activities today that will help make the Planet Formation Imager facility a reality.

astro-ph.IM↗

arXiv2017

Science cases for a visible interferometer

High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome. Today low and high resolution interferometric instruments on the VLTI and CHARA offer an immense range of astrophysical studies. Combining more telescopes and moving to visible wavelengths broadens the science cases even more. With the idea of developing strong science cases for a future visible interferometer, we organized a science group around the following topics: pre-main sequence and main sequence stars, fundamental parameters, asteroseismology and classical pulsating stars, evolved stars, massive stars, active galactic nuclei (AGNs) and imaging techniques. A meeting was organized on the 15th and 16th of January, 2015 in Nice with the support of the Action Specific in Haute Resolution Angulaire (ASHRA), the Programme National en Physique Stellaire (PNPS), the Lagrange Laboratory and the Observatoire de la Cote d'Azur, in order to present these cases and to discuss them further for future visible interferometers. This White Paper presents the outcome of the exchanges. This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41.

astro-ph.SR↗

arXiv2016

Planet Formation Imager (PFI): science vision and key requirements

The Planet Formation Imager (PFI) project aims to provide a strong scientific vision for ground-based optical astronomy beyond the upcoming generation of Extremely Large Telescopes. We make the case that a breakthrough in angular resolution imaging capabilities is required in order to unravel the processes involved in planet formation. PFI will be optimised to provide a complete census of the protoplanet population at all stellocentric radii and over the age range from 0.1 to about 100 Myr. Within this age period, planetary systems undergo dramatic changes and the final architecture of planetary systems is determined. Our goal is to study the planetary birth on the natural spatial scale where the material is assembled, which is the "Hill Sphere" of the forming planet, and to characterise the protoplanetary cores by measuring their masses and physical properties. Our science working group has investigated the observational characteristics of these young protoplanets as well as the migration mechanisms that might alter the system architecture. We simulated the imprints that the planets leave in the disk and study how PFI could revolutionise areas ranging from exoplanet to extragalactic science. In this contribution we outline the key science drivers of PFI and discuss the requirements that will guide the technology choices, the site selection, and potential science/technology tradeoffs.

astro-ph.IM↗

arXiv2016

Architecture design study and technology roadmap for the Planet Formation Imager (PFI)

The Planet Formation Imager (PFI) Project has formed a Technical Working Group (TWG) to explore possible facility architectures to meet the primary PFI science goal of imaging planet formation in situ in nearby star- forming regions. The goals of being sensitive to dust emission on solar system scales and resolving the Hill-sphere around forming giant planets can best be accomplished through sub-milliarcsecond imaging in the thermal infrared. Exploiting the 8-13 micron atmospheric window, a ground-based long-baseline interferometer with approximately 20 apertures including 10km baselines will have the necessary resolution to image structure down 0.1 milliarcseconds (0.014 AU) for T Tauri disks in Taurus. Even with large telescopes, this array will not have the sensitivity to directly track fringes in the mid-infrared for our prime targets and a fringe tracking system will be necessary in the near-infrared. While a heterodyne architecture using modern mid-IR laser comb technology remains a competitive option (especially for the intriguing 24 and 40μm atmospheric windows), the prioritization of 3-5μm observations of CO/H2O vibrotational levels by the PFI-Science Working Group (SWG) pushes the TWG to require vacuum pipe beam transport with potentially cooled optics. We present here a preliminary study of simulated L- and N-band PFI observations of a realistic 4-planet disk simulation, finding 21x2.5m PFI can easily detect the accreting protoplanets in both L and N-band but can see non-accreting planets only in L band. (abridged -- see PDF for full abstract)

astro-ph.IM↗

arXiv2016

Status of the Planet Formation Imager (PFI) concept

The Planet Formation Imager (PFI) project aims to image the period of planet assembly directly, resolving structures as small as a giant planet's Hill sphere. These images will be required in order to determine the key mechanisms for planet formation at the time when processes of grain growth, protoplanet assembly, magnetic fields, disk/planet dynamical interactions and complex radiative transfer all interact - making some planetary systems habitable and others inhospitable. We will present the overall vision for the PFI concept, focusing on the key technologies and requirements that are needed to achieve the science goals. Based on these key requirements, we will define a cost envelope range for the design and highlight where the largest uncertainties lie at this conceptual stage.

astro-ph.IM↗

arXiv2014

The Science Case for the Planet Formation Imager (PFI)

Among the most fascinating and hotly-debated areas in contemporary astrophysics are the means by which planetary systems are assembled from the large rotating disks of gas and dust which attend a stellar birth. Although important work has already been, and is still being done both in theory and observation, a full understanding of the physics of planet formation can only be achieved by opening observational windows able to directly witness the process in action. The key requirement is then to probe planet-forming systems at the natural spatial scales over which material is being assembled. By definition, this is the so-called Hill Sphere which delineates the region of influence of a gravitating body within its surrounding environment. The Planet Formation Imager project (PFI) has crystallized around this challenging goal: to deliver resolved images of Hill-Sphere-sized structures within candidate planet-hosting disks in the nearest star-forming regions. In this contribution we outline the primary science case of PFI. For this purpose, we briefly review our knowledge about the planet-formation process and discuss recent observational results that have been obtained on the class of transition disks. Spectro-photometric and multi-wavelength interferometric studies of these systems revealed the presence of extended gaps and complex density inhomogeneities that might be triggered by orbiting planets. We present detailed 3-D radiation-hydrodynamic simulations of disks with single and multiple embedded planets, from which we compute synthetic images at near-infrared, mid-infrared, far-infrared, and sub-millimeter wavelengths, enabling a direct comparison of the signatures that are detectable with PFI and complementary facilities such as ALMA. From these simulations, we derive some preliminary specifications that will guide the array design and technology roadmap of the facility.

astro-ph.IM↗

arXiv2014

Statistical characterization of polychromatic absolute and differential squared visibilities obtained from AMBER/VLTI instrument

In optical interferometry, the visibility squared modulus are generally assumed to follow a Gaussian distribution and to be independent of each other. A quantitative analysis of the relevance of such assumptions is important to help improving the exploitation of existing and upcoming multi-wavelength interferometric instruments. Analyze the statistical behaviour of both the absolute and the colour-differential squared visibilities: distribution laws, correlations and cross-correlations between different baselines. We use observations of stellar calibrators obtained with AMBER instrument on VLTI in different instrumental and observing configurations, from which we extract the frame-by-frame transfer function. Statistical hypotheses tests and diagnostics are then systematically applied. For both absolute and differential squared visibilities and under all instrumental and observing conditions, we find a better fit for the Student distribution than for the Gaussian, log-normal and Cauchy distributions. We find and analyze clear correlation effects caused by atmospheric perturbations. The differential squared visibilities allow to keep a larger fraction of data with respect to selected absolute squared visibilities and thus benefit from reduced temporal dispersion, while their distribution is more clearly characterized. The frame selection based on the criterion of a fixed SNR value might result in either a biased sample of frames or in a too severe selection.

astro-ph.IM↗

arXiv2014

DISCO: a Spatio-Spectral Recombiner for Pupil Remapping Interferometry

Pupil-remapping is a new high-dynamic range imaging technique that has recently demonstrated feasibility on sky. The current prototypes present however deceiving limiting magnitude, restricting the current use to the brightest stars in the sky. We propose to combine pupil-remapping with spatio-spectral encoding, a technique first applied to the VEGA/CHARA interferometer. The result is an instrument proposal, called "Dividing Interferometer for Stars Characterizations and Observations" (DISCO). The idea is to take profit of wavelength multiplexing when using a spectrograph in order to pack as much as possible the available information, yet providing a potential boost of 1.5 magnitude if used in existing prototypes. We detail in this paper the potential of such a concept.

astro-ph.IM↗

arXiv2013

High spectral resolution imaging of the dynamical atmosphere of the red supergiant Antares in the CO first overtone lines with VLTI/AMBER

We present high spectral resolution aperture-synthesis imaging of the red supergiant Antares (alpha Sco) in individual CO first overtone lines with VLTI/AMBER. The reconstructed images reveal that the star appears differently in the blue wing, line center, and red wing and shows an asymmetrically extended component. The appearance of the star within the CO lines changes drastically within one year, implying a significant change in the velocity field in the atmosphere. Our modeling suggests an outer atmosphere (MOLsphere) extending to 1.2--1.4 stellar radii with CO column densities of (0.5--1)x10^{20} cm^{-2} and a temperature of ~2000 K. While the velocity field in 2009 is characterized by strong upwelling motions at 20--30 km/s, it changed to strong downdrafts in 2010. On the other hand, the AMBER data in the continuum show only a slight deviation from limb-darkened disks and only marginal time variations. We derive a limb-darkened disk diameter of 37.38+/-0.06 mas and a power-law-type limb-darkening parameter of (8.7+/-1.6)x10^{-2} (2009) and 37.31+/-0.09 mas and (1.5+/-0.2)x10^{-1} (2010). We also obtain Teff = 3660+/-120 K and log L/Lsun = 4.88+/-0.23, which suggests a mass of 15+/-5 Msun with an age of 11-15 Myr. This age is consistent with the recently estimated age for the Upper Scorpius OB association. The properties of the outer atmosphere of Antares are similar to those of another well-studied red supergiant, Betelgeuse. The density of the extended outer atmosphere of Antares and Betelgeuse is higher than predicted by the current 3-D convection simulations by at least six orders of magnitude, implying that convection alone cannot explain the formation of the extended outer atmosphere.

astro-ph.SR↗