Searcharxiv⌕ Search

arXiv subjects

Romeo Ortega

Publications and source records attributed to Romeo Ortega.

At least 55 records · Page 3Linked to original sources

On-line Estimation of the Parameters of the Windmill Power Coefficient

Wind turbines are often controlled to harvest the maximum power from the wind, which corresponds to the operation at the top of the bell-shaped power coefficient graph. Such a mode of operation may be achieved implementing an extremum seeking data-based strategy, which is an invasive technique that requires the injection of harmonic disturbances. Another approach is based on the knowledge of the analytic expression of the power coefficient function, an information usually unreliably provided by the turbine manufacturer. In this paper we propose a globally, exponentially convergent on-line estimator of the parameters entering into the windmill power coefficient function. This corresponds to the solution of an identification problem for a nonlinear, nonlinearly parameterized, underexcited system. To the best of our knowledge we have provided the first solution to this challenging, practically important, problem.

eess.SY↗

An Adaptive Observer for Uncertain Linear Time-Varying Systems with Unknown Additive Perturbations

In this paper we are interested in the problem of adaptive state observation of linear time-varying (LTV) systems where the system and the input matrices depend on unknown time-varying parameters. It is assumed that these parameters satisfy some known LTV dynamics, but with unknown initial conditions. Moreover, the state equation is perturbed by an additive signal generated from an exosystem with uncertain constant parameters. Our main contribution is to propose a globally convergent state observer that requires only a weak excitation assumption on the system.

eess.SY↗

State Observation of Affine-in-the-States Systems with Unknown Time-Varying Parameters and Output Delay

In this paper we address the problem of adaptive state observation of affine-inthe-states time-varying systems with delayed measurements and unknown parameters. The development of the results proposed in the [Bobtsov et al. 2021a] and in the [Bobtsov et al. 2021c] is considered. The case with known parameters has been studied by many researchers (see [Sanz et al. 2019, Bobtsov et al. 2021b] and references therein) where, similarly to the approach adopted here, the system is treated as a linear time-varying system. We show that the parameter estimation-based observer (PEBO) design proposed in [Ortega et al. 2015, 2021] provides a very simple solution for the unknown parameter case. Moreover, when PEBO is combined with the dynamic regressor extension and mixing (DREM) estimation technique [Aranovskiy et al. 2016, Ortega et al. 2019], the estimated state converges in fixed-time with extremely weak excitation assumptions.

math.OC↗

PID passivity-based droop control of power converters: Large-signal stability, robustness and performance

We present a full review of PID passivity-based controllers (PBC) applied to power electronic converters, discussing limitations, unprecedented merits and potential improvements in terms of large-signal stability, robustness and performance. We provide four main contributions. The nominal case is first considered and it is shown, under the assumption of perfect knowledge of the system parameters, that the PID-PBC is able to guarantee global exponential stability of a desired operating point for any positive gains. Second, we analyze robustness of the controller to parameters uncertainty for a specific class of power converters, by establishing precise stability margins. Third, we propose a modification of the controller by introducing a leakage, in order to overcome some of the intrinsic performance and robustness limitations. Interestingly, such controller can be interpreted at steady-state as a droop between the input and the passive output, similar to traditional primary controllers. Fourth, we robustify the design against saturation of the control input via an appropriate monotone transformation of the controller. The obtained results are thoroughly discussed and validated by simulations on two relevant power applications: a dc/dc boost converter and an HVDC grid-connected voltage source converter.

eess.SY↗

Observability is Sufficient for the Design of Globally Exponentially Convergent State Observers for State-affine Nonlinear Systems

In this paper we are interested in the problem of state observation of state-affine nonlinear systems. Our main contribution is to propose a globally exponentially convergent observer that requires only the necessary assumption of observability of the system. To the best of the authors' knowledge this is the first time such a result is reported in the literature.

eess.SY↗

Identifiability Implies Robust, Globally Exponentially Convergent On-line Parameter Estimation: Application to Model Reference Adaptive Control

In this paper we propose a new parameter estimator that ensures global exponential convergence of linear regression models requiring only the necessary assumption of identifiability of the regression equation,which we show is equivalent to interval excitation of the regressor vector. Continuous and discrete-time versions of the estimators are given. An extension to--separable and monotonic--non-linear parameterizations is also given. The estimators are shown to be robust to additive measurement noise and--not necessarily slow--parameter variations. Moreover, a version of the continuous-time estimator that rejects sinusoidal disturbances with unknown internal model is given. The estimator is shown to be applicable to the classical model reference adaptive control problem relaxing the conspicuous assumption of known sign of the high-frequency gain. Simulation results that illustrate the performance of the estimator are given.

eess.SY↗

Persistent Excitation is Unnecessary for On-line Exponential Parameter Estimation: A New Algorithm that Overcomes this Obstacle

In this paper, we prove that it is possible to estimate online the parameters of a classical vector linear regression equation $ Y=Ωθ$, where $ Y \in \mathbb{R}^n,\;Ω\in \mathbb{R}^{n \times q}$ are bounded, measurable signals and $θ\in \mathbb{R}^q$ is a constant vector of unknown parameters, even when the regressor $Ω$ is not persistently exciting. Moreover, the convergence of the new parameter estimator is global and exponential and is given for both continuous-time and discrete-time implementations. As an illustration example, we consider the problem of parameter estimation of a linear time-invariant system, when the input signal is not sufficiently exciting, which is known to be a necessary and sufficient condition for the solution of the problem with the standard gradient or least-squares adaptation algorithms.

eess.SY↗

Parameter Estimation and Adaptive Control of Euler-Lagrange Systems Using the Power Balance Equation Parameterization

It is widely recognized that the existing parameter estimators and adaptive controllers for robot manipulators are extremely complicated to be of practical use. This is mainly due to the fact that the existing parameterization includes the complicated signal and parameter relations introduced by the Coriolis and centrifugal forces matrix. In an insightful remark of their seminal paper Slotine and Li suggested to use the parameterization of the power balance equation, which avoids these terms -- yielding significantly simpler designs. To the best of our knowledge, such an approach was never actually pursued in on-line implementations, because the excitation requirements for the consistent estimation of the parameters is ``very high". In this paper we use a recent technique of generation of ``exciting" regressors developed by the authors to overcome this fundamental problem. The result is applied to general Euler-Lagrange systems and the fundamental advantages of the new parameterization are illustrated with comprehensive simulations of a 2 degrees-of-freedom robot manipulator.

math.DS↗

Parameter Identification with Finite-Convergence Time Alertness Preservation

In this brief note we present two new parameter identifiers whose estimates converge in finite time under weak interval excitation assumptions. The main novelty is that, in contrast with other finite-convergence time (FCT) estimators, our schemes preserve the FCT property when the parameters change. The previous versions of our FCT estimators can track the parameter variations only asymptotically. Continuous-time and discrete-time versions of the new estimators are presented

math.ST↗

Generalized Parameter Estimation-based Observers: Application to Power Systems and Chemical-Biological Reactors

In this paper we propose a new state observer design technique for nonlinear systems. It consists of an extension of the recently introduced parameter estimation-based observer, which is applicable for systems verifying a particular algebraic constraint. In contrast to the previous observer, the new one avoids the need of implementing an open loop integration that may stymie its practical application. We give two versions of this observer, one that ensures asymptotic convergence and the second one that achieves convergence in finite time. In both cases, the required excitation conditions are strictly weaker than the classical persistent of excitation assumption. It is shown that the proposed technique is applicable to the practically important examples of multimachine power systems and chemical-biological reactors.

math.DS↗

PMU-Based Decentralized Mixed Algebraic and Dynamic State Observation in Multi-Machine Power Systems

We propose a novel decentralized mixed algebraic and dynamic state observation method for multi-machine power systems with unknown inputs and equipped with Phasor Measurement Units (PMUs). More specifically, we prove that for the third-order flux-decay model of a synchronous generator, the local PMU measurements give enough information to reconstruct algebraically the load angle and the quadrature-axis internal voltage. Due to the algebraic structure a high numerical efficiency is achieved, which makes the method applicable to large scale power systems. Also, we prove that the relative shaft speed can be globally estimated combining a classical Immersion and Invariance (I&I) observer with - the recently introduced - dynamic regressor and mixing (DREM) parameter estimator. This adaptive observer ensures global convergence under weak excitation assumptions that are verified in applications. The proposed method does not require the measurement of exogenous inputs signals such as the field voltage and the mechanical torque nor the knowledge of mechanical subsystem parameters.

eess.SY↗

A Flux and Speed Observer for Induction Motors with Unknown Rotor Resistance and Load Torque and no Persistent Excitation Requirement

In this paper we address the problems of flux and speed observer design for voltage-fed induction motors with unknown rotor resistance and load torque. The only measured signals are stator current and control voltage. Invoking the recently reported Dynamic Regressor Extension and Mixing-Based Adaptive Observer (DREMBAO) we provide the first global solution to this problem. The proposed DREMBAO achieve asymptotic convergence under an excitation condition that is strictly weaker than persistent excitation. If the latter condition is assumed the convergence is exponential.

eess.SY↗

Distributed Observers for LTI Systems with Finite Convergence Time: A Parameter Estimation-based Approach

A novel approach to solve the problem of distributed state estimation of linear time-invariant systems is proposed in this paper. It relies on the application of parameter estimation-based observers, where the state observation task is reformulated as a parameter estimation problem. In contrast with existing results our solution achieves convergence in finite-time, without injection of high gain, and imposes very weak assumptions on the communication graph---namely the existence of a Hamiltonian walk. The scheme is shown to be robust vis-á-vis external disturbances and communication delays.

eess.SY↗

Smooth, Time-invariant Regulation of Nonholonomic Systems via Energy Pumping-and-Damping

In this paper we propose an energy pumping-and-damping technique to regulate nonholonomic systems described by kinematic models. The controller design follows the widely popular interconnection and damping assignment passivity-based methodology, with the free matrices partially structured. Two asymptotic regulation objectives are considered: drive to zero the state or drive the systems total energy to a desired constant value. In both cases, the control laws are smooth, time-invariant, state-feedbacks. For the nonholonomic integrator we give an almost global solution for both problems, with the objectives ensured for all system initial conditions starting outside a set that has zero Lebesgue measure and is nowhere dense. For the general case of higher-order nonholonomic systems in chained form, a local stability result is given. Simulation results comparing the performance of the proposed controller with other existing designs are also provided.

eess.SY↗

A Globally Convergent State Observer for Multimachine Power Systems with Lossy Lines

We present the first solution to the problem of estimation of the state of multimachine power systems with lossy transmission lines. We consider the classical three-dimensional \fluxdecay" model of the power system and assume that the active and reactive power as well as the rotor angle and excitation voltage at each generator is available for measurement|a scenario that is feasible with current technology. The design of the observer relies on two recent developments proposed by the authors: a parameter estimation based approach to the problem of state estimation and the use of the dynamic regressor extension and mixing technique to estimate these parameters. Thanks to the combination of these techniques it is possible to overcome the problem of lack of persistent excitation that stymies the application of standard observer designs. Simulation results illustrate the performance of the proposed observer.

eess.SY↗

A Globally Stable Practically Implementable PI Passivity-based Controller for Switched Power Converters

In this paper we propose a PI passivity-based controller, applicable to a large class of switched power converters, that ensures global state regulation to a desired equilibrium point. A solution to this problem was reported in \cite{HERetal} but it requires full state-feedback, which makes it practically unfeasible. To overcome this limitation we construct a state observer that is implementable with measurements that are available in practical applications. The observer reconstructs the state in finite-time, ensuring global convergence of the PI. The excitation requirement for the observer is very weak and is satisfied in normal operation of the converters. Simulation results illustrate the excellent performance of the proposed PI.

eess.SY↗

State Observation of Power Systems Equipped with Phasor Measurement Units: The Case of Fourth Order Flux-Decay Model

The problem of effective use of Phasor Measurement Units (PMUs) to enhance power systems awareness and security is a topic of key interest. The central question to solve is how to use this new measurements to reconstruct the state of the system. In this paper we provide the first solution to the problem of (globally convergent) state estimation of multimachine power systems equipped with PMUs and described by the fourth order flux-decay model. This work is a significant extension of our previous result, where this problem was solved for the simpler third order model, for which it is possible to recover algebraically part of the unknown state. Unfortunately, this property is lost in the more accurate fourth order model, significantly complicating the state observation task. The design of the observer relies on two recent developments proposed by the authors, a parameter estimation based approach to the problem of state estimation and the use of the Dynamic Regressor Extension and Mixing (DREM) technique to estimate these parameters. The use of DREM allows us to overcome the problem of lack of persistent excitation that stymies the application of standard parameter estimation designs. Simulation results illustrate the latter fact and show the improved performance of the proposed observer with respect to a locally stable gradient-descent based observer.

eess.SY↗