Searcharxiv⌕ Search

arXiv subjects

Romeo Ortega

Publications and source records attributed to Romeo Ortega.

At least 73 records · Page 4Linked to original sources
arXiv2020

A New Signal Injection-based Method for Estimation of Position in Interior Permanent Magnet Synchronous Motors

Several heuristic procedures to estimate the rotor position of permanent magnet synchronous motors (PMSM) via signal injection have been reported in the literature. Using averaging theory, a framework to analyse such schemes has been recently proposed. However, to the best of our knowledge, no theoretical analysis of the performance of the conventional linear time invariant filtering methods, which are widely used as standard industrial practice, has been reported in the literature. The objective of this note is to propose a new method that, on one hand, is amenable to a rigorous theoretical analysis and, on the other hand, ensures an improved accuracy in the position estimation. An additional advantage of the new method is that it relies on the use of linear operators, implementable with simple computations. The effectiveness of the proposed scheme is assessed by experiments on an interior PMSM platform driven by a 521 V DC bus with 5-kHz PWM.

eess.SY↗
arXiv2020

A globally exponentially stable position observer for interior permanent magnet synchronous motors

The design of a position observer for the interior permanent magnet synchronous motor is a challenging problem that, in spite of many research efforts, remained open for a long time. In this paper we present the first globally exponentially convergent solution to it, assuming that the saliency is not too large. As expected in all observer tasks, a persistency of excitation condition is imposed. Conditions on the operation of the motor, under which it is verified, are given. In particular, it is shown that at rotor standstill---when the system is not observable---it is possible to inject a probing signal to enforce the persistent excitation condition. {The high performance of the proposed observer, in standstill and high speed regions, is verified by extensive series of test-runs on an experimental setup.

eess.SY↗
arXiv2020

Path following of a class of underactuated mechanical systems via immersion and invariance-based orbital stabilization

This paper aims to provide a new problem formulation of path following for mechanical systems without time parameterization nor guidance laws, namely, we express the control objective as an orbital stabilization problem. It is shown that, it is possible to adapt the immersion and invariance technique to design static state-feedback controllers that solve the problem. In particular, we select the target dynamics adopting the recently introduced Mexican sombrero energy assignment method. To demonstrate the effectiveness of the proposed method we apply it to control underactuated marine surface vessels.

eess.SY↗
arXiv2019

Orbital Stabilization of Nonlinear Systems via the Immersion and Invariance Technique

Immersion and Invariance is a technique for the design of stabilizing and adaptive controllers and state observers for nonlinear systems. In all these applications the problem considered is the stabilization of equilibrium points. Motivated by some modern applications we show that the technique can also be used to solve the problem of orbital stabilization, where the final objective is to generate periodic solutions that are attractive. The feasibility of our result is illustrated with some classical mechanical engineering and electronics examples.

eess.SY↗
arXiv2019

On Generation of Virtual Outputs via Signal Injection: Application to Observer Design for Electromechanical Systems

Probing signal injection is a well-established technique to extract additional information from a weakly (or non) observable dynamical system. Using averaging theory, a framework to analyse such schemes for general nonlinear systems has been recently proposed in [Combes et. al., 2016], where it is shown that the signal injection may be used to generate a new high frequency component of the systems output that can be used for state observation or controller design. A key step for the success of this technique is the implementation of a filter to reconstruct this virtual output from the measurement of the overall systems output. The main contribution of this paper is to propose a new filter with guaranteed convergence properties that outperforms the classical designs. The method is applied to a general class of electromechanical systems, and its performance is assessed via simulations and experiments on the benchmark example of a 1-dof magnetic levitation system.

eess.SY↗
arXiv2019

Parameter Estimation of Nonlinearly Parameterized Regressions without Overparameterization nor Persistent Excitation: Application to System Identification and Adaptive Control

In this paper we propose a solution to the problem of parameter estimation of nonlinearly parameterized regressions--continuous or discrete time--and apply it for system identification and adaptive control. We restrict our attention to parameterizations that can be factorized as the product of two functions, a measurable one and a nonlinear function of the parameters to be estimated. Although in this case it is possible to define an extended vector of unknown parameters to get a linear regression, it is well-known that overparameterization suffers from some severe shortcomings. Another feature of the proposed estimator is that parameter convergence is ensured without a persistency of excitation assumption. It is assumed that, after a coordinate change, some of the elements of the transformed function satisfy a monotonicity condition. The proposed estimators are applied to design identifiers and adaptive controllers for nonlinearly parameterized systems. In continuous-time we consider a general class of nonlinear systems and those described by Euler-Lagrange models, while in discrete-time we apply the method to the challenging problems of direct and indirect adaptive pole-placement. The effectiveness of our approach is illustrated with several classical examples, which are traditionally tackled using overparameterization and assuming persistency of excitation.

math.OC↗
arXiv2019

Voltage regulation in buck--boost coniverters feeding an unknown constant power load: an adaptive passivity-based control

Rapid developments in power distribution systems and renewable energy have widened the applications of dc--dc buck--boost converters in dc voltage regulation. Applications include vehicular power systems, renewable energy sources that generate power at a low voltage, and dc microgrids. It is noted that the cascade--connection of converters in these applications may cause instability due to the fact that converters acting as loads have a constant power load (CPL) behavior. In this paper, the output voltage regulation problem of a buck--boost converter feeding a CPL is addressed. The construction of the feedback controller is based on the interconnection and damping assignment control technique. Additionally, an immersion and invariance parameter estimator is proposed to compute online the extracted load power, which is difficult to measure in practical applications. It is ensured through the design that the desired operating point is (locally) asymptotically stable with a guaranteed domain of attraction. The approach is validated via computer simulations and experimental prototyping.

eess.SY↗
arXiv2019

Orbital stabilization of nonlinear systems via Mexican sombrero energy shaping and pumping-and-damping injection

In this paper we show that a slight modification to the widely popular interconnection and damping assignment passivity-based control method---originally proposed for stabilization of equilibria of nonlinear systems---allows us to provide a solution to the more challenging orbital stabilization problem. Two different, though related, ways how this procedure can be applied are proposed. First, the assignment of an energy function that has a minimum in a closed curve, i.e., with the shape of a Mexican sombrero. Second, the use of a damping matrix that changes "sign" according to the position of the state trajectory relative to the desired orbit, that is, pumping or dissipating energy. The proposed methodologies are illustrated with the example of the induction motor and prove that it yields the industry standard field oriented control.

eess.SY↗
arXiv2019

New Results on Parameter Estimation via Dynamic Regressor Extension and Mixing: Continuous and Discrete-time Cases

We present some new results on the dynamic regressor extension and mixing parameter estimators for linear regression models recently proposed in the literature. This technique has proven instrumental in the solution of several open problems in system identification and adaptive control. The new results include: (i) a unified treatment of the continuous and the discrete-time cases; (ii) the proposal of two new extended regressor matrices, one which guarantees a quantifiable transient performance improvement, and the other exponential convergence under conditions that are strictly weaker than regressor persistence of excitation; and (iii) an alternative estimator ensuring parameter estimation in finite-time that retains its alertness to track time-varying parameters. Simulations that illustrate our results are also presented.

eess.SY↗
arXiv2019

Online Estimation of Power System Inertia Using Dynamic Regressor Extension and Mixing

The increasing penetration of power-electronic-interfaced devices is expected to have a significant effect on the overall system inertia and a crucial impact on the system dynamics. In the future, the reduction of inertia will have drastic consequences on protection and real-time control and will play a crucial role in the system operation. Therefore, in a highly deregulated and uncertain environment, it is necessary for Transmission System Operators to be able to monitor the system inertia in real time. We address this problem by developing and validating an online inertia estimation algorithm. The estimator is derived using the recently proposed dynamic regressor extension and mixing procedure. The performance of the estimator is demonstrated via several test cases using the 1013-machine ENTSO-E dynamic model.

eess.SY↗
arXiv2018

Sensorless Control of the Levitated Ball

One of the most widely studied dynamical systems in nonlinear control theory is the levitated ball. Several full-state feedback controllers that ensure asymptotic regulation of the ball position have been reported in the literature. However, to the best of our knowledge, the design of a stabilizing law measuring only the current and the voltage - so-called sensorless control - is conspicuous by its absence. Besides its unquestionable theoretical interest, the high cost and poor reliability of position sensors for magnetic levitated systems, makes the problem of great practical application. Our main contribution is to provide the fist solution to this problem. Instrumental for the development of the theory is the use of parameter estimation-based observers, which combined with the dynamic regressor extension and mixing parameter estimation technique, allow the reconstruction of the magnetic flux. With the knowledge of the latter it is shown that the mechanical coordinates can be estimated with suitably tailored nonlinear observers. Replacing the observed states, in a certainty equivalent manner, with a full information asymptotically stabilising law completes the sensorless controller design. Simulation results are used to illustrate the performance of the proposed scheme.

eess.SY↗
arXiv2018

On the Existence and Long-Term Stability of Voltage Equilibria in Power Systems with Constant Power Loads

Voltage instability is a major threat in power system operation. The growing presence of constant power loads significantly aggravates this issue, hence motivating the development of new analysis methods for both existence and stability of voltage equilibria. Formally, this problem can be cast as the analysis of solutions of a set of nonlinear algebraic equations of the form $f(x)=0$, where $f:\mathbb{R}^n \mapsto \mathbb{R}^{n}$, and the associated differential equation $\dot x=f(x)$. By invoking advanced concepts of dynamical systems theory and effectively exploiting its monotonicity, we exhibit all possible scenarios for existence, uniqueness and stability, of its equilibria. We prove that, if there are equilibria, there is a distinguished one that is locally stable and attractive, and we give some physically-interpretable conditions such that it is unique. Moreover, a simple on-line procedure to decide whether equilibria exist of not, and to compute the distinguished one is proposed. In addition, we show how the proposed framework can be applied to long-term voltage stability analysis in AC power systems, multi-terminal high-voltage DC systems and DC microgrids.

eess.SY↗
arXiv2018

Active Damping of a DC Network with a Constant Power Load: An Adaptive Passivity-based Control Approach

This paper proposes a nonlinear, adaptive controller to increase the stability margin of a direct-current (DC) small-scale electrical network containing a constant power load, whose value is unknown. Due to their negative incremental impedance, constant power loads are known to reduce the effective damping of a network, leading to voltage oscillations and even to network collapse. To tackle this problem, we consider the incorporation of a controlled DC-DC power converter between the feeder and the constant power load. The design of the control law for the converter is based on the use of standard Passivity-Based Control and Immersion and Invariance theories. The good performance of the controller is evaluated with numerical simulations.

eess.SY↗
arXiv2018

An Adaptive Observer for Sensorless Control of the Levitated Ball Using Signal Injection

In this paper we address the problem of sensorless control of the 1-DOF magnetic levitation system. Assuming that only the current and the voltage are measurable, we design an adaptive state observer using the technique of signal injection. Our main contribution is to propose a new filter to identify the virtual output generated by the signal injection. It is shown that this filter, designed using the dynamic regressor extension and mixing estimator, outperforms the classical one. Two additional features of the proposed observer are that (i) it does not require the knowledge of the electrical resistance, which is also estimated on-line and (ii) exponential convergence to a tunable residual set is guaranteed without excitation assumptions. The observer is then applied, in a certainty equivalent way, to a full state-feedback control law to obtain the sensorless controller, whose performance is assessed via simulations and experiments.

eess.SY↗
arXiv2018

On State Observers for Nonlinear Systems: A New Design and a Unifying Framework

In this paper we propose a new observer design technique for nonlinear systems. It combines the well-known Kazantzis-Kravaris-Luenberger observer and the recently introduced parameter estimation-based observer, which become special cases of it---extending the realm of applicability of both methods. A second contribution of the paper is the proof that these designs can be recast as particular cases of immersion and invariance observers---providing in this way a unified framework for their analysis and design. Simulation results of a physical system that illustrates the superior performance of the proposed observer compared to other existing observers are presented.

eess.SY↗
arXiv2018

Permanent Magnet Synchronous Motors are Globally Asymptotically Stabilizable with PI Current Control

This note shows that the industry standard desired equilibrium for permanent magnet synchronous motors (i.e., maximum torque per Ampere) can be globally asymptotically stabilized with a PI control around the current errors, provided some viscous friction (possibly small) is present in the rotor dynamics and the proportional gain of the PI is suitably chosen. Instrumental to establish this surprising result is the proof that the map from voltages to currents of the incremental model of the motor satisfies some passivity properties. The analysis relies on basic Lyapunov theory making the result available to a wide audience.

eess.SY↗
arXiv2018

Power-Controlled Hamiltonian Systems: Application to Electrical Systems with Constant Power Loads

We study a type of port-Hamiltonian system, in which the controller or disturbance is not applied to the flow variables, but to the systems power, a scenario that appears in many practical applications. A suitable framework is provided to model these systems and to investigate their shifted passivity properties, based on which, a stability analysis is carried out. The applicability of the results is illustrated with the important problem of stability analysis of electrical circuits with constant power loads.

eess.SY↗