arXiv subjects

Ronny Ramlau

Publications and source records attributed to Ronny Ramlau.

At least 19 recordsLinked to original sources

arXiv2026

On Fourier Phase Retrieval from Differential Intensity Measurements with Applications to Wavefront Sensing

In this paper, we consider Fourier phase retrieval from differential intensity measurements, i.e., the problem of determining the phase of a complex-valued function from a series of intensity measurements differing only by slight modulations in Fourier domain. These modulations may be induced by optical elements such as prisms or phase plates, or via spatial-light modulators. Generalizing the principles behind the transport of intensity equation, we show that given such differential intensity measurements, the phase can be determined as the solution of certain partial differential or integro-differential equations. This is then used to design efficient reconstruction algorithms for a number of Fourier-type wavefront sensors, such as the pyramid wavefront sensor, commonly used in adaptive optics. Numerical experiments illustrate the usefulness of our proposed approach.

math.NA↗

arXiv2026

A self-adjoint Fourier-type model for the iQuad wavefront sensor

Advanced adaptive optics (AO) systems can use Fourier-type wavefront sensing to correct optical distortions encountered in ground-based telescopes, AO-assisted retinal imaging, and free-space optical communications (FSOC). Recently, a novel Fourier-type wavefront sensor (WFS) known as the iQuad WFS has been introduced. Its design features a focal plane tessellation with a four-quadrant phase mask (FQPM) that incorporates a $\pm \pi/2$ phase shift between adjacent quadrants. In this work, we establish a comprehensive mathematical framework for the iQuad WFS, including its forward models and linearizations based on the Fr\'echet derivative. We reveal a connection between the iQuad WFS and the 2d finite Hilbert transform and demonstrate that the linear iQuad WFS operator is self-adjoint - a unique property among Fourier-type WFSs. Additionally, we introduce the double iQuad WFS, a two-path configuration that combines two rotated iQuad WFSs. This design addresses the limitations of the single iQuad WFS by suppressing poorly-seen phase components. Moreover, the double setup simplifies the mathematical modeling. We also highlight iQuad similarities to the widely used pyramid wavefront sensor (PWFS). Finally, we extend the concept of modulation to the iQuad WFS, further enhancing its versatility. The theoretical analysis presented here lays the groundwork for the development of fast and robust model-based wavefront reconstruction algorithms for the iQuad WFS, paving the way for future applications in AO instruments.

math-ph↗

arXiv2026

Efficient TV regularization of large-scale linear inverse problems via the SCD semismooth* Newton method with applications in tomography

In this paper, we consider the efficient numerical minimization of Tikhonov functionals resulting from total-variation (TV) regularization of linear inverse problems. Since the TV penalty is non-smooth, this is typically done either via smooth approximations, which are inexact, or using non-smooth optimization techniques, which can often be numerically expensive, in particular for large-scale problems. Here, we present a numerically efficient minimization approach based on the recently proposed semismooth* Newton method, which employs a novel concept of graphical derivatives and exhibits locally superlinear convergence. The proposed approach is specifically tailored to TV regularization, suitable for large-scale inverse problems, and supported by strong mathematical convergence guarantees. Furthermore, we demonstrate its performance on two (large-scale) tomographic imaging problems and compare our results to those obtained via other state-of-the-art TV regularization approaches. Finally, an open-source Matlab implementation of the proposed method is made available online at https://github.com/HGfrerer/TVReg-2D-Semismoothstar-Newton.

math.NA↗

arXiv2025

3D Full Spectrum Fitting: Algorithm Comparison

Full spectrum fitting is the prevailing method for extracting stellar kinematic and population measurements from 1D galaxy spectra. 3D methods refer to analysis of Integral Field Spectroscopy (IFS) data where spatial and spectral dimensions are modelled simultaneously. While several 3D methods exist for modelling gas structures there has been less investigation into the more computationally demanding problem of 3D full spectrum fitting for stellar recoveries. This work introduces and compares two algorithms for this task: the Projected Nesterov Kaczmarz Reconstruction method (PNKR) and a version of the Bayes-LOSVD software which has been modified to account for spatial correlations. We aim to understand strengths and weaknesses of both algorithms and assess the impact of 3D methods for stellar inferences. We apply both recovery algorithms to a mock IFS data over a signal-to-noise ratio (SNR) range from 20-200 and evaluate the quality of the recoveries compared to the known ground truth. Accounting for spatial correlations in Bayes-LOSVD significantly improved the accuracy and precision of kinematic recoveries. 3D modelling with PNKR did not provide any significant improvement over 1D fits however, for SNR>40, PNKR did recover the most accurate kinematics overall. Additionally, by modelling the joint distribution over kinematics and populations, PNKR could successfully infer trends between these quantities e.g. inferring local metallicity-velocity trends, albeit with a significant bias on the absolute metallicity. Having demonstrated advantages of (i) 3D modelling with Bayes-LOSVD, and (ii) joint kinematic-population analyses with PNKR, we conclude that both methodological advances will prove useful for detecting and characterising stellar structures from IFS data.

astro-ph.GA↗

arXiv2025

Singular Value-based Atmospheric Tomography with Fourier Domain Regularization (SAFR)

Atmospheric tomography, the problem of reconstructing atmospheric turbulence profiles from wavefront sensor measurements, is an integral part of many adaptive optics systems. It is used to enhance the image quality of ground-based telescopes, such as for the Multiconjugate Adaptive Optics Relay For ELT Observations (MORFEO) instrument on the Extremely Large Telescope (ELT). To solve this problem, a singular-value decomposition (SVD) based approach has been proposed before. In this paper, we focus on the numerical implementation of the SVD-based Atmospheric Tomography with Fourier Domain Regularization Algorithm (SAFR) and its performance for Multi-Conjugate Adaptive Optics (MCAO) systems. The key features of the SAFR algorithm are the utilization of the FFT and the pre-computation of computationally demanding parts. Together, this yields a fast algorithm with less memory requirements than commonly used Matrix Vector Multiplication (MVM) approaches. We evaluate the performance of SAFR regarding reconstruction quality and computational expense in numerical experiments using the simulation environment COMPASS, in which we use an MCAO setup resembling the physical parameters of the MORFEO instrument of the ELT.

astro-ph.IM↗

arXiv2025

A Geometrical Acoustics based Focusing Algorithm for Layered Media in Medical Ultrasound

Ultrasound imaging is a widely used, non-invasive diagnostic tool in modern medicine. A crucial assumption is a constant sound speed in the observed medium. For large scale sound speed variations, this assumption leads to blurred and distorted images. In this paper, we present a Geometrical Acoustics based Focusing Algorithm (GOAT) which is able to correct for these aberrations, given a known layered medium setting with continuously differentiable medium boundaries. Existence and uniqueness conditions for a solution to the underlying system of equations are given. Using numerical simulations, the precision of our method is evaluated. Finally, the resulting image quality improvements are demonstrated in a phantom-based experimental setup.

math.NA↗

arXiv2025

Wavefront super-resolution for Adaptive Optics systems on ground-based telescopes

In ground-based astronomy, Adaptive Optics (AO) is a pivotal technique, engineered to correct wavefront phase distortions and thereby enhance the quality of the observed images. Integral to an AO system is the wavefront sensor (WFS), which is crucial for detecting wavefront aberrations from guide stars, essential for phase calculations. Many models based on a single-WFS model have been proposed to obtain the high-resolution phase of the incoming wavefront. In this paper, we delve into the realm of multiple WFSs within the framework of state-of-the-art telescope setups for high-resolution phase reconstruction. We propose a model for reconstructing a high-resolution wavefront from a sequence of wavefront gradient data from multiple WFSs in a multi-frame post-processing setting. Our model is based on the turbulence statistics and the Taylor frozen flow hypothesis, incorporating knowledge of the wind velocities in atmospheric turbulence layers. We also introduce an $H_2$ regularization term, especially for atmospheric characteristics under von Karman statistics, and provide a theoretical analysis for $H^2$ space within $H^{11/6}$. Numerical simulations are conducted to demonstrate the robustness and effectiveness of our regularization term and multi-WFS reconstruction strategy under identical experimental conditions.

astro-ph.IM↗

arXiv2025

Fast reconstruction approaches for photoacoustic tomography with smoothing Sobolev/Mat\'ern priors

In photoacoustic tomography (PAT), the computation of the initial pressure distribution within an object from its time-dependent boundary measurements over time is considered. This problem can be approached from two well-established points of view: deterministically using regularisation methods, or stochastically using the Bayesian framework. Both approaches frequently require the solution of a variational problem. In the paper we elaborate the connection between these approaches by establishing the equivalence between a smoothing Mat{\'e}rn class of covariance operators and Sobolev embedding operator $E_s: H^s \hookrightarrow L^2$. We further discuss the use of a Wavelet-based implementation of the adjoint operator $E_s^*$ which also allows for efficient evaluations for certain Mat{\'e}rn covariance operators, leading to efficient implementations both in terms of computational effort as well as memory requirements. The proposed methods are validated with reconstructions for the photoacoustic problem.

math.NA↗

arXiv2025

Leveraging Real-Time Data Analysis and Multiple Kernel Learning for Manufacturing of Innovative Steels

The implementation of thermally sprayed components in steel manufacturing presents challenges for production and plant maintenance. While enhancing performance through specialized surface properties, these components may encounter difficulties in meeting modified requirements due to standardization in the refurbishment process. This article proposes updating the established coating process for thermally spray coated components for steel manufacturing (TCCSM) by integrating real-time data analytics and predictive quality management. Two essential components--the data aggregator and the quality predictor--are designed through continuous process monitoring and the application of data-driven methodologies to meet the dynamic demands of the evolving steel landscape. The quality predictor is powered by the simple and effective multiple kernel learning strategy with the goal of realizing predictive quality. The data aggregator, designed with sensors, flow meters, and intelligent data processing for the thermal spray coating process, is proposed to facilitate real-time analytics. The performance of this combination was verified using small-scale tests that enabled not only the accurate prediction of coating quality based on the collected data but also proactive notification to the operator as soon as significant deviations are identified.

cs.LG↗

arXiv2025

A Practical Guide to Optimizing Industrial Thermal Spraying through Comparative Multi-Objective Optimization

Achieving both high quality and cost-efficiency are two critical yet often conflicting objectives in manufacturing and maintenance processes. Quality standards vary depending on the specific application, while cost-effectiveness remains a constant priority. These competing objectives lead to multi-objective optimization problems, where algorithms are employed to identify Pareto-optimal solutions - compromise points which provide decision-makers with feasible parameter settings. The successful application of such optimization algorithms relies on the ability to model the underlying physical system, which is typically complex, through either physical or data-driven approaches, and to represent it mathematically. This paper applies three multi-objective optimization algorithms to determine optimal process parameters for high-velocity oxygen fuel (HVOF) thermal spraying. Their ability to enhance coating performance while maintaining process efficiency is systematically evaluated, considering practical constraints and industrial feasibility. Practical validation trials are conducted to verify the approximate theoretical solutions generated by the algorithms, ensuring their applicability and reliability in real-world scenarios. By exploring the performance of these diverse algorithms in an industrial setting, this study offers insights into their practical applicability, guiding both researchers and practitioners in enhancing process efficiency and product quality in the coating industry.

math.OC↗

arXiv2025

Heat Conduction with Phase Change in Permafrost Modules of Vegetation Models

We consider the problem of heat conduction with phase change, that is essential for permafrost modeling in Land Surface Models and Dynamic Global Vegetation Models. These models require minimal computational effort and an extremely robust solver for large-scale, long-term simulations. The weak enthalpy formulation of the Stefan problem is used as the mathematical model and a finite element method is employed for the discretization. Leveraging the piecewise affine structure of the nonlinear time-stepping equation system, we demonstrate that this system has a unique solution and provide a solver that is guaranteed to find this solution in a finite number of steps from any initial guess. Comparisons with the Neumann analytical solution and tests in the Lund-Potsdam-Jena managed Land vegetation model reveal that the new method does not introduce significantly higher computational costs than the widely used DECP method while providing greater accuracy. In particular, it avoids a known nonphysical artifact in the solution.

math.NA↗

arXiv2024

On SCD Semismooth$^*$ Newton methods for the efficient minimization of Tikhonov functionals with non-smooth and non-convex penalties

We consider the efficient numerical minimization of Tikhonov functionals with nonlinear operators and non-smooth and non-convex penalty terms, which appear for example in variational regularization. For this, we consider a new class of SCD semismooth$^*$ Newton methods, which are based on a novel concept of graphical derivatives, and exhibit locally superlinear convergence. We present a detailed description of these methods, and provide explicit algorithms in the case of sparsity and total-variation penalty terms. The numerical performance of these methods is then illustrated on a number of tomographic imaging problems.

math.NA↗

arXiv2024

On Phase Unwrapping via Digital Wavefront Sensors

In this paper, we derive a new class of methods for the classic 2D phase unwrapping problem of recovering a phase function from its wrapped form. For this, we consider the wrapped phase as a wavefront aberration in an optical system, and use reconstruction methods for (digital) wavefront sensors for its recovery. The key idea is that mathematically, common wavefront sensors are insensitive to whether an incoming wavefront is wrapped or not. However, typical reconstructors for these sensors are optimized to compute smooth wavefronts. Thus, digitally "propagating" a wrapped phase through such a sensor and then applying one of these reconstructors results in a smooth unwrapped phase. First, we show how this principle can be applied to derive phase unwrapping algorithms based on digital Shack-Hartmann and Fourier-type wavefront sensors. Then, we numerically test our approach on an unwrapping problem appearing in a free-space optical communications project currently under development, and compare the results to those obtained with other state-of-the-art algorithms.

math.NA↗

arXiv2024

Singular Value and Frame Decomposition-based Reconstruction for Atmospheric Tomography

Atmospheric tomography, the problem of reconstructing atmospheric turbulence profiles from wavefront sensor measurements, is an integral part of many adaptive optics systems used for enhancing the image quality of ground-based telescopes. Singular-value and frame decompositions of the underlying atmospheric tomography operator can reveal useful analytical information on this inverse problem, as well as serve as the basis of efficient numerical reconstruction algorithms. In this paper, we extend existing singular value decompositions to more realistic Sobolev settings including weighted inner products, and derive an explicit representation of a frame-based (approximate) solution operator. These investigations form the basis of efficient numerical solution methods, which we analyze via numerical simulations for the challenging, real-world Adaptive Optics system of the Extremely Large Telescope using the entirely MATLAB-based simulation tool MOST.

math.NA↗

arXiv2024

Predictive Modelling of Critical Variables for Improving HVOF Coating using Gamma Regression Models

Thermal spray coating is a critical process in many industries, involving the application of coatings to surfaces to enhance their functionality. This paper proposes a framework for modelling and predicting critical target variables in thermal spray coating processes, based on the application of statistical design of experiments (DoE) and the modelling of the data using generalized linear models (GLMs) with a particular emphasis on gamma regression. Experimental data obtained from thermal spray coating trials are used to validate the presented approach, demonstrating that it is able to accurately model and predict critical target variables. As such, the framework has significant potential for the optimization of thermal spray coating processes, and can contribute to the development of more efficient and effective coating technologies in various industries.

stat.AP↗

arXiv2024

High fidelity adaptive mirror simulations with reduced order models

In the design process of large adaptive mirrors numerical simulations represent the first step to evaluate the system design compliance in terms of performance, stability and robustness. For the next generation of Extremely Large Telescopes increased system dimensions and bandwidths lead to the need of modeling not only the deformable mirror alone, but also all the system supporting structure or even the full telescope. The capability to perform the simulations with an acceptable amount of time and computational resources is highly dependent on finding appropriate methods to reduce the size of the resulting dynamic models. In this paper we present a framework developed together with the company Microgate to create a reduced order structural model of a large adaptive mirror as a preprocessing step to the control system simulations. The reduced dynamic model is then combined with the remaining system components allowing to simulate the full adaptive mirror in a computationally efficient way. We analyze the feasibility of our reduced models for Microgate's prototype of the adaptive mirror of the Giant Magellan Telescope.

astro-ph.IM↗

arXiv2024

On some analytic properties of the atmospheric tomography operator: Non-Uniqueness and reconstructability issues

In this paper, we consider the atmospheric tomography operator, which describes the effect of turbulent atmospheric layers on incoming planar wavefronts. Given wavefronts from different guide stars, measured at a telescope, the inverse problem consists in the reconstruction of the turbulence above the telescope. We show that the available data is not sufficient to reconstruct the atmosphere uniquely. Additionally, we show that classical regularization methods as Tikhonov regularization or Landweber iteration will always fail to reconstruct a physically meaningful turbulence distribution.

math.NA↗

arXiv2024

An Inverse Problems Approach to Pulse Wave Analysis in the Human Brain

Cardiac pulsations in the human brain have received recent interest due to their possible role in the pathogenesis of neurodegenerative diseases. Further interest stems from their possible application as an endogenous signal source that can be utilized for brain imaging in general. The (pulse-)wave describing the blood flow velocity along an intracranial artery consists of a forward (anterograde) and a backward (retrograde, reflected) part, but measurements of this wave usually consist of a superposition of these components. In this paper, we provide a mathematical framework for the inverse problem of estimating the pulse wave velocity, as well as the forward and backward component of the pulse wave separately from MRI measurements on intracranial arteries. After a mathematical analysis of this problem, we consider possible reconstruction approaches, and derive an alternate direction approach for its solution. The resulting methods provide estimates for anterograde/retrograde wave forms and the pulse wave velocity under specified assumptions on a cerebrovascular model system. Numerical experiments on simulated and experimental data demonstrate the applicability and preliminary in vivo feasibility of the proposed methods.

math.NA↗