arXiv subjects

Roy S. Smith

Publications and source records attributed to Roy S. Smith.

At least 19 recordsLinked to original sources

arXiv2025

An Innovations-Based Data-Driven Kalman Predictor for Predictive Control

A recently developed data-driven Kalman filter requires offline measurement of the process disturbance; a requirement that is often unmet for many practical applications. We propose a solution that parametrizes the Kalman filter exclusively using measured input and output data. The key idea is to use the innovations form which naturally accounts for the process disturbance and measurement noise into a single orthogonal stochastic process. Unlike process disturbances, the innovations process can be estimated directly from input-output data via a numerically efficient projection step. The performance of the method is demonstrated using a benchmark simulation.

eess.SY↗

arXiv2025

Network-Independent Incremental Passivity Conditions for Grid-Forming Inverter Control

Grid-forming inverters control the power transfer between the AC and DC sides of an electrical grid while maintaining the frequency and voltage of the AC side. This paper focuses on ensuring large-signal stability of an electrical grid with inverter-interfaced renewable sources. We prove that the Hybrid-Angle Control (HAC) scheme for grid-forming inverters can exhibit incremental passivity properties between current and voltage at both the AC and DC ports. This incremental passivity can be certified through decentralized conditions. Inverters operating under HAC can, therefore, be connected to other passive elements (e.g. transmission lines) with an immediate guarantee of global transient stability regardless of the network topology or parameters. Passivity of Hybrid Angle Control is also preserved under small-signal (linearized) analyses, in contrast to conventional proportional droop laws that are passivity-short at low frequencies. Passivity and interconnected-stability properties are demonstrated through an example case study.

eess.SY↗

arXiv2025

System Identification Beyond the Nyquist Frequency: A Kernel-Regularized Approach

Models that contain intersample behavior are important for control design of systems with slow-rate outputs. The aim of this paper is to develop a system identification technique for fast-rate models of systems where only slow-rate output measurements are available, e.g., vision-in-the-loop systems. In this paper, the intersample response is estimated by identifying fast-rate models through least-squares criteria, and the limitations of these models are determined. In addition, a method is developed that surpasses these limitations and is capable of estimating unique fast-rate models of arbitrary order by regularizing the least-squares estimate. The developed method utilizes fast-rate inputs and slow-rate outputs and identifies fast-rate models accurately in a single identification experiment. Finally, both simulation and experimental validation on a prototype wafer stage demonstrate the effectiveness of the framework.

eess.SY↗

arXiv2025

Plug and Play Distributed Control of Clustered Energy Hub Networks

The transition to renewable energy is driving the rise of distributed multi-energy systems, in which individual energy hubs and prosumers (e.g., homes, industrial campuses) generate, store, and trade energy. Economic Model Predictive Control (MPC) schemes are widely used to optimize operation of energy hubs by efficiently dispatching resources and minimizing costs while ensuring operational constraints are met. Peer-to-peer (P2P) energy trading among hubs enhances network efficiency and reduces costs but also increases computational and privacy challenges, especially as the network scales. Additionally, current distributed control techniques require global recomputation whenever the network topology changes, limiting scalability. To address these challenges, we propose a clustering-based P2P trading framework that enables plug-and-play operation, allowing energy hubs to seamlessly join or leave without requiring network-wide controller updates. The impact is restricted to the hubs within the affected cluster. The energy trading problem is formulated as a bi-level bargaining game, where inter-cluster trading commitments are determined at the cluster level, while energy dispatch and cost-sharing among hubs within a cluster are refined at the hub level. Both levels are solved in a distributed manner using ADMM, ensuring computational feasibility and privacy preservation. Moreover, we develop plug-and-play procedures to handle dynamic topology changes at both the hub and cluster levels, minimizing disruptions across the network. Simulation results demonstrate that the proposed bi-level framework reduces operational costs, and enables scalable energy management under plug-and-play operation.

eess.SY↗

arXiv2025

Loss-aware Pricing Strategies for Peer-to-Peer Energy Trading

Peer-to-peer(P2P) energy trading may increase efficiency and reduce costs, but introduces significant challenges for network operators such as maintaining grid reliability, accounting for network losses, and redistributing costs equitably. We propose a novel loss-aware pricing strategy for P2P energy markets that addresses these challenges while incentivizing participation in the cooperative energy trading market. The problem is formulated as a hierarchical Stackelberg game, where a grid operator determines network tariffs while prosumers optimize their trades based on these tariffs while guaranteeing that network constraints are satisfied. The algorithm is designed to minimize and recover their cost from the trading parties, while also minimizing the total cost of the hubs. The mechanism dynamically adjusts tariffs based on location and network topology, discouraging loss-intensive trades. Finally, the complete framework includes the computation of fair trading prices, ensuring all market participants benefit equitably. An ADMM-based hyper-gradient descent method is proposed for solving this problem. Extensive numerical simulations using the benchmark IEEE 33-bus system demonstrate significant cost reductions and improved network efficiency through reduction in network losses compared to constant tariff schemes. Results highlight the adaptability and scalability of the proposed mechanism to varying network configurations and size, demand profiles, and seasonal conditions.

eess.SY↗

arXiv2024

Distributed Dual Quaternion Extended Kalman Filtering for Spacecraft Pose Estimation

In this paper, a distributed dual-quaternion multiplicative extended Kalman filter for the estimation of poses and velocities of individual satellites in a fleet of spacecraft is analyzed. The proposed algorithm uses both absolute and relative pose measurements between neighbouring satellites in a network, allowing each individual satellite to estimate its own pose and that of its neighbours. By utilizing the distributed Kalman consensus filter, a novel sensor and state-estimate fusion procedure is proposed that allows each satellite to improve its own state estimate by sharing data with its neighbours over a communication link. A leader-follower approach, whereby only a subset of the satellites have access to an absolute pose measurement is also examined. In this case, followers rely solely on the information provided by their neighbours, as well as relative pose measurements to those neighbours. The algorithm is tested extensively via numerical simulations, and it is shown that the approach provides a substantial improvement in performance over the scenario in which the satellites do not cooperate. A case study of satellites swarming an asteroid is presented, and the performance in the leader-follower scenario is also analyzed.

math.OC↗

arXiv2024

Data-Driven Structured Robust Control of Linear Systems

Static structured control refers to the task of designing a state-feedback controller such that the control gain satisfies a subspace constraint. Structured control has applications in control of communication-inhibited dynamical systems, such as systems in networked environments. This work performs $H_2$-suboptimal regulation under a common structured state-feedback controller for a class of data-consistent plants. The certification of $H_2$-performance is attained through a combination of standard $H_2$ LMIs, convex sufficient conditions for structured control, and a matrix S-lemma for set-membership. The resulting convex optimization problems are linear matrix inequalities whose size scales independently of the number of data samples collected. Data-driven structured $H_2$-regulation control is demonstrated on example systems.

math.OC↗

arXiv2024

Small Noise Analysis of Non-Parametric Closed-Loop Identification

We revisit the problem of non-parametric closed-loop identification in frequency domain; we give a brief survey of the literature and provide a small noise analysis of the direct, indirect, and joint input-output methods when two independent experiments with identical excitation are used. The analysis is asymptotic in the noise variance (i.e., as the standard deviation of the innovations $σ\to 0$), for a finite data record of length $N$. We highlight the relationship between the estimators accuracy and the loop shape via asymptotic variance expressions given in terms of the sensitivity function. The results are illustrated using a numerical simulation example.

eess.SY↗

arXiv2024

Finite Sample Frequency Domain Identification

We study non-parametric frequency-domain system identification from a finite-sample perspective. We assume an open loop scenario where the excitation input is periodic and consider the Empirical Transfer Function Estimate (ETFE), where the goal is to estimate the frequency response at certain desired (evenly-spaced) frequencies, given input-output samples. We show that under sub-Gaussian colored noise (in time-domain) and stability assumptions, the ETFE estimates are concentrated around the true values. The error rate is of the order of $\mathcal{O}((d_{\mathrm{u}}+\sqrt{d_{\mathrm{u}}d_{\mathrm{y}}})\sqrt{M/N_{\mathrm{tot}}})$, where $N_{\mathrm{tot}}$ is the total number of samples, $M$ is the number of desired frequencies, and $d_{\mathrm{u}},\,d_{\mathrm{y}}$ are the dimensions of the input and output signals respectively. This rate remains valid for general irrational transfer functions and does not require a finite order state-space representation. By tuning $M$, we obtain a $N_{\mathrm{tot}}^{-1/3}$ finite-sample rate for learning the frequency response over all frequencies in the $ \mathcal{H}_{\infty}$ norm. Our result draws upon an extension of the Hanson-Wright inequality to semi-infinite matrices. We study the finite-sample behavior of ETFE in simulations.

eess.SY↗

arXiv2024

A distributed framework for linear adaptive MPC

Adaptive model predictive control (MPC) robustly ensures safety while reducing uncertainty during operation. In this paper, a distributed version is proposed to deal with network systems featuring multiple agents and limited communication. To solve the problem in a distributed manner, structure is imposed on the control design ingredients without sacrificing performance. Decentralized and distributed adaptation schemes that allow for a reduction of the uncertainty online compatibly with the network topology are also proposed. The algorithm ensures robust constraint satisfaction, recursive feasibility and finite gain $\ell_2$ stability, and yields lower closed-loop cost compared to robust distributed MPC in simulations.

eess.SY↗

arXiv2024

Peak Time-Windowed Risk Estimation of Stochastic Processes

This paper develops a method to upper-bound extreme-values of time-windowed risks for stochastic processes. Examples of such risks include the maximum average or 90% quantile of the current along a transmission line in any 5-minute window. This work casts the time-windowed risk analysis problem as an infinite-dimensional linear program in occupation measures. In particular, we employ the coherent risk measures of the mean and the expected shortfall (conditional value at risk) to define the maximal time-windowed risk along trajectories. The infinite-dimensional linear program must then be truncated into finite-dimensional optimization problems, such as by using the moment-sum of squares hierarchy of semidefinite programs. The infinite-dimensional linear program will have the same optimal value as the original nonconvex risk estimation task under compactness and regularity assumptions, and the sequence of semidefinite programs will converge to the true value under additional properties of algebraic characterization. The scheme is demonstrated for risk analysis of example stochastic processes.

math.OC↗

arXiv2024

Peak Estimation of Rational Systems using Convex Optimization

This paper presents algorithms that upper-bound the peak value of a state function along trajectories of a continuous-time system with rational dynamics. The finite-dimensional but nonconvex peak estimation problem is cast as a convex infinite-dimensional linear program in occupation measures. This infinite-dimensional program is then truncated into finite-dimensions using the moment-Sum-of-Squares (SOS) hierarchy of semidefinite programs. Prior work on treating rational dynamics using the moment-SOS approach involves clearing dynamics to common denominators or adding lifting variables to handle reciprocal terms under new equality constraints. Our solution method uses a sum-of-rational method based on absolute continuity of measures. The Moment-SOS truncations of our program possess lower computational complexity and (empirically demonstrated) higher accuracy of upper bounds on example systems as compared to prior approaches.

math.OC↗

arXiv2024

Optimal Data-Driven Prediction and Predictive Control using Signal Matrix Models

Data-driven control uses a past signal trajectory to characterise the input-output behaviour of a system. Willems' lemma provides a data-based prediction model allowing a control designer to bypass the step of identifying a state-space or transfer function model. This paper provides a more parsimonious formulation of Willems' lemma that separates the model into initial condition matching and predictive control design parts. This avoids the need for regularisers in the predictive control problem that are found in other data-driven predictive control methods. It also gives a closed form expression for the optimal (minimum variance) unbiased predictor of the future output trajectory and applies it for predictive control. Simulation comparisons illustrate very good control performance.

eess.SY↗

arXiv2024

Online Identification of Stochastic Continuous-Time Wiener Models Using Sampled Data

It is well known that ignoring the presence of stochastic disturbances in the identification of stochastic Wiener models leads to asymptotically biased estimators. On the other hand, optimal statistical identification, via likelihood-based methods, is sensitive to the assumptions on the data distribution and is usually based on relatively complex sequential Monte Carlo algorithms. We develop a simple recursive online estimation algorithm based on an output-error predictor, for the identification of continuous-time stochastic parametric Wiener models through stochastic approximation. The method is applicable to generic model parameterizations and, as demonstrated in the numerical simulation examples, it is robust with respect to the assumptions on the spectrum of the disturbance process.

stat.ME↗

arXiv2024

Online Feedback Equilibrium Seeking

This paper proposes a unifying design framework for dynamic feedback controllers that track solution trajectories of time-varying generalized equations, such as local minimizers of nonlinear programs or competitive equilibria (e.g., Nash) of non-cooperative games. Inspired by the feedback optimization paradigm, the core idea of the proposed approach is to re-purpose classic iterative algorithms for solving generalized equations (e.g., Josephy--Newton, forward-backward splitting) as dynamic feedback controllers by integrating online measurements of the continuous-time nonlinear plant. Sufficient conditions for closed-loop stability and robustness of the algorithm-plant cyber-physical interconnection are derived in a sampled-data setting by combining and tailoring results from (monotone) operator, fixed-point, and nonlinear systems theory. Numerical simulations on smart building automation and competitive supply-chain management are presented to support the theoretical findings.

math.OC↗

arXiv2023

Frequency-Domain Identification of Discrete-Time Systems using Sum-of-Rational Optimization

We propose a computationally tractable method for the identification of stable canonical discrete-time rational transfer function models, using frequency domain data. The problem is formulated as a global non-convex optimization problem whose objective function is the sum of weighted squared residuals at each observed frequency datapoint. Stability is enforced using a polynomial matrix inequality constraint. The problem is solved globally by a moment-sum-of-squares hierarchy of semidefinite programs through a framework for sum-of-rational-functions optimization. Convergence of the moment-sum-of-squares program is guaranteed as the bound on the degree of the sum-of-squares polynomials approaches infinity. The performance of the proposed method is demonstrated using numerical simulation examples.

eess.SY↗

arXiv2023

Stochastic Data-Driven Predictive Control: Regularization, Estimation, and Constraint Tightening

Data-driven predictive control methods based on the Willems' fundamental lemma have shown great success in recent years. These approaches use receding horizon predictive control with nonparametric data-driven predictors instead of model-based predictors. This study addresses three problems of applying such algorithms under unbounded stochastic uncertainties: 1) tuning-free regularizer design, 2) initial condition estimation, and 3) reliable constraint satisfaction, by using stochastic prediction error quantification. The regularizer is designed by leveraging the expected output cost. An initial condition estimator is proposed by filtering the measurements with the one-step-ahead stochastic data-driven prediction. A novel constraint-tightening method, using second-order cone constraints, is presented to ensure high-probability chance constraint satisfaction. Numerical results demonstrate that the proposed methods lead to satisfactory control performance in terms of both control cost and constraint satisfaction, with significantly improved initial condition estimation.

eess.SY↗

arXiv2023

MIMO Grid Impedance Identification of Three-Phase Power Systems: Parametric vs. Nonparametric Approaches

A fast and accurate grid impedance measurement of three-phase power systems is crucial for online assessment of power system stability and adaptive control of grid-connected converters. Existing grid impedance measurement approaches typically rely on pointwise sinusoidal injections or sequential wideband perturbations to identify a nonparametric grid impedance curve via fast Fourier computations in the frequency domain. This is not only time-consuming, but also inaccurate during time-varying grid conditions, while on top of that, the identified nonparametric model cannot be immediately used for stability analysis or control design. To tackle these problems, we propose to use parametric system identification techniques (e.g., prediction error or subspace methods) to obtain a parametric impedance model directly from time-domain current and voltage data. Our approach relies on injecting wideband excitation signals in the converter's controller and allows to accurately identify the grid impedance in closed loop within one injection and measurement cycle. Even though the underlying parametric system identification techniques are well-studied in general, their utilization in a grid impedance identification setup poses specific challenges, is vastly underexplored, and has not gained adequate attention in urgent and timely power systems applications. To this end, we demonstrate in numerical experiments how the proposed parametric approach can accomplish a significant improvement compared to prevalent nonparametric methods.

eess.SY↗