arXiv subjects

Rudolf Bratschitsch

Publications and source records attributed to Rudolf Bratschitsch.

At least 19 recordsLinked to original sources

arXiv2026

Strain engineering of transient exciton diffusion in WSe2 monolayers at cryogenic temperatures

Tungsten-based transition metal dichalcogenides exhibit dark excitons as the energetically lowest states. These are crucial for exciton thermalization and propagation and they dominate low-temperature photoluminescence via the emergence of pronounced phonon sidebands. After a resonant excitation, highly mobile hot dark excitons are formed, which quickly thermalize into an equilibrium distribution. The application of strain modifies the exciton energy landscape and, in particular, the relative energy separation between bright and dark exciton states. The impact of strain on the transient photoluminescence and diffusion of non-equilibrium excitons has remained largely unexplored so far. In this work, we investigate the spatiotemporal exciton dynamics in strained hBN-encapsulated WSe2 monolayers at cryogenic temperatures. We demonstrate that tensile strain abruptly increases the excess energy of hot excitons, thereby accelerating their transient diffusion. We trace this back to suppressed phonon-mediated scattering from bright to dark excitons. Furthermore, we predict a periodic modulation of the transient exciton diffusion in the presence of a compressive strain resulting from strain-driven emission of M phonons. The gained microscopic insights illustrate how strain can be used to engineer transient photoluminescence and exciton diffusion in technologically promising 2D semiconductors.

cond-mat.mes-hall↗

arXiv2025

Theory of In-Plane-Magnetic-Field-Dependent Excitonic Spectra in Atomically Thin Semiconductors

The linear absorption spectrum of excitons in TMDC monolayers under the influence of an in-plane magnetic field is theoretically studied. We demonstrate that in-plane magnetic fields induce a hybridization between spin-bright and spin-dark exciton transitions, resulting in a brightening of spin-dark excitons. We analytically investigate spectral features including resonance energy shifts, broadening and amplitudes ratios. In particular, for a MoSe$_2$ monolayer with radiatively-limited linewidth, we find a complex interplay of dark-bright splitting and linewidth difference of both involved spin-bright and spin-dark excitons.

cond-mat.mes-hall↗

arXiv2023

Engineering 2D material exciton lineshape with graphene/h-BN encapsulation

Control over the optical properties of atomically thin two-dimensional (2D) layers, including those of transition metal dichalcogenides (TMDs), is needed for future optoelectronic applications. Remarkable advances have been achieved through alloying, chemical and electrical doping, and applied strain. However, the integration of TMDs with other 2D materials in van der Waals heterostructures (vdWHs) to tailor novel functionalities remains largely unexplored. Here, the near-field coupling between TMDs and graphene/graphite is used to engineer the exciton lineshape and charge state. Fano-like asymmetric spectral features are produced in WS$_{2}$, MoSe$_{2}$ and WSe$_{2}$ vdWHs combined with graphene, graphite, or jointly with hexagonal boron nitride (h-BN) as supporting or encapsulating layers. Furthermore, trion emission is suppressed in h-BN encapsulated WSe$_{2}$/graphene with a neutral exciton redshift (44 meV) and binding energy reduction (30 meV). The response of these systems to electron-beam and light probes is well-described in terms of 2D optical conductivities of the involved materials. Beyond fundamental insights into the interaction of TMD excitons with structured environments, this study opens an unexplored avenue toward shaping the spectral profile of narrow optical modes for application in nanophotonic devices.

cond-mat.mes-hall↗

arXiv2023

Pressure dependence of intra- and interlayer excitons in 2H-MoS$_2$ bilayers

The optical and electronic properties of multilayer transition metal dichalcogenides differ significantly from their monolayer counterparts due to interlayer interactions. The separation of individual layers can be tuned in a controlled way by applying pressure. Here, we use a diamond anvil cell to compress bilayers of 2H-MoS$_2$ in the gigapascal range. By measuring optical transmission spectra, we find that increasing pressure leads to a decrease in the energy splitting between the A and interlayer exciton. Comparing our experimental findings with ab initio calculations, we conclude that the observed changes are not due to the commonly assumed hydrostatic compression. This effect is attributed to the MoS$_2$ bilayer adhering to the diamond, which reduces in-plane compression. Moreover, we demonstrate that the distinct real-space distributions and resulting contributions from the valence band account for the different pressure dependencies of the inter- and intralayer excitons in compressed MoS$_2$ bilayers.

cond-mat.mes-hall↗

arXiv2022

Nanoimprint strain-engineering of 2D semiconductors

Mechanical strain is a powerful tool to tune the optical and optoelectronic properties of atomically thin semiconductors. Inhomogeneous strain plays an important role in exciton funneling and the activation of single-photon emitters in 2D materials. Here, we create an inhomogeneous strain profile in a 2D semiconductor on a micrometer scale by a nanoimprint process. We present a nanoimprint setup, where a mold is used to apply pressure in a controlled way to a WS2 monolayer on a heated polymer layer. After printing, the strain created in the 2D semiconductor is verified by hyperspectral optical imaging. The developed nanoimprint technique is scalable and could be transferred to commercial nanoimprint machines.

physics.app-ph↗

arXiv2022

Excitonic Absorption Signatures of Twisted Bilayer WSe$_{2}$ by Electron Energy-Loss Spectroscopy

Moiré twist angle underpins the interlayer interaction of excitons in twisted van der Waals hetero- and homo-structures. The influence of twist angle on the excitonic absorption of twisted bilayer tungsten diselenide (WSe$_{2}$) has been investigated using electron energy-loss spectroscopy. Atomic-resolution imaging by scanning transmission electron microscopy was used to determine key structural parameters, including the nanoscale measurement of the relative twist angle and stacking order. Detailed spectral analysis revealed a pronounced blueshift in the high-energy excitonic peak C with increasing twist angle, up to 200 meV when compared to the AA$^{\prime}$ stacking. The experimental findings have been discussed relative to first-principle calculations of the dielectric response of the AA$^{\prime}$ stacked bilayer WSe$_{2}$ as compared to monolayer WSe$_{2}$ by employing the \textit{GW} plus Bethe-Salpeter equation (BSE) approaches, resolving the origin of higher energy spectral features from ensembles of excitonic transitions, and thus any discrepancies between previous calculations. Furthermore, the electronic structure of moiré supercells spanning twist angles of $\sim$9.5-46.5$^{\circ}$ calculated by density functional theory (DFT) were unfolded, showing an uplifting of the conduction band minimum near the $Q$ point and minimal change in the upper valence band concurrently. The combined experiment/theory investigation provides valuable insight into the physical origins of high-energy absorption resonances in twisted bilayers, which enables to track the evolution of interlayer coupling from tuning of the exciton C transitions by absorption spectroscopy.

cond-mat.mes-hall↗

arXiv2022

Resonant and phonon-assisted ultrafast coherent control of a single hBN color center

Single-photon emitters in solid-state systems are important building blocks for scalable quantum technologies. Recently, quantum light emitters have been discovered in the wide-gap van der Waals insulator hBN. These color centers have attracted considerable attention due to their quantum performance at elevated temperatures and wide range of transition energies. Here, we demonstrate coherent state manipulation of a single hBN color center with ultrafast laser pulses and investigate in our joint experiment-theory study the coupling between the electronic system and phonons. We demonstrate that coherent control can not only be performed resonantly on the optical transition giving access to the decoherence but also phonon-assisted, which reveals the internal phonon quantum dynamics. In the case of optical phonons we measure their decoherence, stemming in part from their anharmonic decay. Dephasing induced by the creation of acoustic phonons manifests as a rapid decrease of the coherent control signal when traveling phonon wave packets are emitted. Furthermore, we demonstrate that the quantum superposition between a phonon-assisted process and the resonant excitation causes ultrafast oscillations of the coherent control signal. Our results pave the way for ultrafast phonon quantum state control on the nanoscale and open up a new promising perspective for hybrid quantum technologies.

cond-mat.mes-hall↗

arXiv2022

High-performance broadband Faraday rotation spectroscopy of 2D materials and thin magnetic films

We present a Faraday rotation spectroscopy (FRS) technique for measurements on the micron scale. Spectral acquisition speeds of many orders of magnitude faster than state-of-the-art modulation spectroscopy setups are demonstrated. The experimental method is based on charge-coupled-device detection, avoiding speed-limiting components, such as polarization modulators with lock-in amplifiers. At the same time, FRS spectra are obtained with a sensitivity of 20 $μ$rad (0.001$^\circ$) over a broad spectral range (525 nm - 800 nm), which is on par with state-of-the-art polarization-modulation techniques. The new measurement technique also automatically cancels unwanted Faraday rotation backgrounds. Using the setup, we perform Faraday rotation spectroscopy of excitons in a hBN-encapsulated atomically thin semiconductor WS$_2$ under magnetic fields of up to 1.4 T at room temperature and liquid helium temperature. We determine the A exciton g-factor of -4.4 $\pm$ 0.3 at room temperature, and -4.2 $\pm$ 0.2 at liquid helium temperature. In addition, we perform FRS and hysteresis loop measurements on a 20 nm thick film of an amorphous magnetic Tb$_{0.2}$Fe$_{0.8}$ alloy.

cond-mat.mes-hall↗

arXiv2022

Substrate influence on transition metal dichalcogenide monolayer exciton absorption linewidth broadening

The excitonic states of transition metal dichacolgenide (TMD) monolayers are heavily influenced by their external dielectric environment based on the substrate used. In this work, various wide bandgap dielectric materials, namely hexagonal boron nitride (\textit{h}-BN) and amorphous silicon nitride (Si$_3$N$_4$), under different configurations as support or encapsulation material for WS$_2$ monolayers are investigated to disentangle the factors contributing to inhomogeneous broadening of exciton absorption lines in TMDs using electron energy loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM). In addition, monolayer roughness in each configuration was determined from tilt series of electron diffraction patterns by assessing the broadening of diffraction spots by comparison with simulations. From our experiments, the main factors that play a role in linewidth broadening can be classified in increasing order of importance by: monolayer roughness, surface cleanliness, and substrate-induced charge trapping. Furthermore, because high-energy electrons are used as a probe, electron beam-induced damage on bare TMD monolayer is also revealed to be responsible for irreversible linewidth increases. \textit{h}-BN not only provides clean surfaces of TMD monolayer, and minimal charge disorder, but can also protect the TMD from irradiation damage. This work provides a better understanding of the mechanisms by which \textit{h}-BN remains, to date, the most compatible material for 2D material encapsulation, facilitating the realization of intrinsic material properties to their full potential.

cond-mat.mes-hall↗

arXiv2022

Single photon emission from individual nanophotonic-integrated colloidal quantum dots

Solution processible colloidal quantum dots hold great promise for realizing single-photon sources embedded into scalable quantum technology platforms. However, the high-yield integration of large numbers of individually addressable colloidal quantum dots in a photonic circuit has remained an outstanding challenge. Here, we report on integrating individual colloidal core-shell quantum dots (CQDs) into a nanophotonic network that allows for excitation and efficient collection of single-photons via separate waveguide channels. An iterative electron beam lithography process provides a viable method to position single emitters at predefined positions in a photonic integrated circuit with yield that approaches unity. Our work moves beyond the bulk optic paradigm of confocal microscopy and paves the way for supplying chip-scale quantum networks with single photons from large numbers of simultaneously controllable quantum emitters.

quant-ph↗

arXiv2020

Theory of the Coherent Response of Magneto-Excitons and Magneto-Biexcitons in Monolayer Transition Metal Dichalcogenides

The recent accessibility of high quality, charge neutral monolayer transition metal dichalcogenides with narrow exciton linewidths at the homogeneous limit provides an ideal platform to study excitonic many-body interactions. In particular, the possibility to manipulate coherent exciton-exciton interactions, which govern the ultrafast nonlinear optical response, by applying an external magnetic field has not been considered so far. We address this discrepancy by presenting a nonlinear microscopic theory in the coherent limit for optical excitations in the presence of out-of-plane, in-plane, and tilted magnetic fields. Specifically, we explore the magnetic-field-induced exciton and biexciton fine structure and calculate their oscillator strengths based on a Heisenberg equations of motion formalism. Our microscopic evaluations of pump-probe spectra allow to interpret and predict coherent signatures in future wave-mixing experiments.

cond-mat.mes-hall↗

arXiv2020

Strain-dependent exciton diffusion in transition metal dichalcogenides

Monolayers of transition metal dichalcogenides (TMDs) have a remarkable excitonic landscape with deeply bound bright and dark exciton states. Their properties are strongly affected by lattice distortions that can be created in a controlled way via strain. Here, we perform a joint theory-experiment study investigating exciton diffusion in strained tungsten disulfide (WS$_2$) monolayers. We reveal a non-trivial and non-monotonic influence of strain. Lattice deformations give rise to different energy shifts for bright and dark excitons changing the excitonic landscape, the efficiency of intervalley scattering channels, and the weight of single exciton species to the overall exciton diffusion. We predict a minimal diffusion coefficient in unstrained WS$_2$ followed by a steep speed-up by a factor of 3 for tensile biaxial strain at about 0.6\% strain - in excellent agreement with our experiments. The obtained microscopic insights on the impact of strain on exciton diffusion are applicable to a broad class of multi-valley 2D materials.

cond-mat.mes-hall↗

arXiv2020

Dark trions govern the temperature-dependent optical absorption and emission of doped atomically thin semiconductors

We perform absorption and photoluminescence spectroscopy of trions in hBN-encapsulated WSe$_2$, WS$_2$, MoSe$_2$, and MoS$_2$ monolayers, depending on temperature. The different trends for W- and Mo-based materials are excellently reproduced considering a Fermi-Dirac distribution of bright and dark trions. We find a dark trion, $\rm{X_D^-}$ 19 meV $\textit{below}$ the lowest bright trion, $\rm{X}_1^-$ in WSe$_2$ and WS$_2$. In MoSe$_2$, $\rm{X_D^-}$ lies 6 meV $\textit{above}$ $\rm{X}_1^-$, while $\rm{X_D^-}$ and $\rm{X}_1^-$ almost coincide in MoS$_2$. Our results agree with GW-BSE $\textit{ab-initio}$ calculations and quantitatively explain the optical response of doped monolayers with temperature.

cond-mat.mes-hall↗

arXiv2019

Ultrafast dynamics in monolayer TMDCs: the interplay of dark excitons, phonons and intervalley Coulomb exchange

Understanding the ultrafast coupling and relaxation mechanisms between valleys in transition metal dichalcogenide semiconductors is of crucial interest for future valleytronic devices. Recent ultrafast pump-probe experiments showed an unintuitive significant bleaching at the excitonic $B$ transition after optical excitation of the energetically lower excitonic $A$ transition. Here, we present a possible microscopic explanation for this surprising effect. It is based on the joint action of exchange coupling and phonon-mediated thermalization into dark exciton states and does not involve a population of the B exciton. Our work demonstrates how intra- and intervalley coupling on a femtosecond timescale governs the optical valley response of 2D semiconductors.

cond-mat.mes-hall↗

arXiv2019

Revisiting the buckling metrology method to determine the Young's modulus of 2D materials

Measuring the mechanical properties of two-dimensional materials is a formidable task. While regular electrical and optical probing techniques are suitable even for atomically thin materials, conventional mechanical tests cannot be directly applied. Therefore, new mechanical testing techniques need to be developed. Up to now, the most widespread approaches require micro-fabrication to create freely suspended membranes, rendering their implementation complex and costly. Here, we revisit a simple yet powerful technique to measure the mechanical properties of thin films. The buckling metrology method, that does not require the fabrication of freely suspended structures, is used to determine the Young's modulus of several transition metal dichalcogenides (MoS2, MoSe2, WS2 and WSe2) with thicknesses ranging from 3 to 10 layers. We critically compare the obtained values for the Young's modulus and their uncertainty, finding that this simple technique provides results, which are in good agreement with those reported using other highly sophisticated testing methods. By comparing the cost, complexity and time required for the different methods reported in the literature, the buckling metrology method presents certain advantages that makes it an interesting mechanical test tool for 2D materials.

cond-mat.mtrl-sci↗

arXiv2019

Thickness determination of MoS2, MoSe2, WS2 and WSe2 on transparent stamps used for deterministic transfer of 2D materials

Here, we propose a method to determine the thickness of the most common transition metal dichalcogenides (TMDCs) placed on the surface of transparent stamps, used for the deterministic placement of two-dimensional materials, by analyzing the red, green and blue channels of transmission-mode optical microscopy images of the samples. In particular, the blue channel transmittance shows a large and monotonic thickness dependence, making it a very convenient probe of the flake thickness. The method proved to be robust given the small flake-to-flake variation and the insensitivity to doping changes of MoS2. We also tested the method for MoSe2, WS2 and WSe2. These results provide a reference guide to identify the number of layers of this family of materials on transparent substrates only using optical microscopy.

physics.app-ph↗

arXiv2019

Phonon-assisted emission and absorption of individual color centers in hexagonal boron nitride

Defect centers in hexagonal boron nitride represent room-temperature single-photon sources in a layered van der Waals material. These light emitters appear with a wide range of transition energies ranging over the entire visible spectrum, which renders the identification of the underlying atomic structure challenging. In addition to their eminent properties as quantum light emitters, the coupling to phonons is remarkable. Their photoluminescence exhibits significant side band emission well separated from the zero phonon line (ZPL) and an asymmetric broadening of the ZPL itself. In this combined theoretical and experimental study we show that the phonon side bands can be well described in terms of the coupling to bulk longitudinal optical (LO) phonons. To describe the ZPL asymmetry we show that in addition to the coupling to longitudinal acoustic (LA) phonons also the coupling to local mode oscillations of the defect center with respect to the entire host crystal has to be considered. By studying the influence of the emitter's wave function dimensions on the phonon side bands we find reasonable values for size of the wave function and the deformation potentials. We perform photoluminescence excitation measurements to demonstrate that the excitation of the emitters is most efficient by LO-phonon assisted absorption.

cond-mat.mes-hall↗

arXiv2019

Electroluminescence from multi-particle exciton complexes in transition metal dichalcogenide semiconductors

Light emission from higher-order correlated excitonic states has been recently reported in hBN-encapsulated monolayer WSe2 and WS2 upon optical excitation. These exciton complexes are found to be bound states of excitons residing in opposite valleys in momentum space, a promising feature that could be employed in valleytronics or other novel optoelectronic devices. However, electrically-driven light emission from such exciton species is still lacking. Here we report electroluminescence from bright and dark excitons, negatively charged trions and neutral and negatively charged biexcitons, generated by a pulsed gate voltage, in hexagonal boron nitride encapsulated monolayer WSe2 and WS2 with graphene as electrode. By tailoring the pulse parameters we are able to tune the emission intensity of the different exciton species in both materials. We find the electroluminescence from charged biexcitons and dark excitons to be as narrow as 2.8 meV.

cond-mat.mes-hall↗