arXiv subjects

Rudolf Bratschitsch

Publications and source records attributed to Rudolf Bratschitsch.

32 records · Page 2Linked to original sources

arXiv2018

Zeeman spectroscopy of excitons and hybridization of electronic states in few-layer WSe$_2$, MoSe$_2$ and MoTe$_2$

Monolayers and multilayers of semiconducting transition metal dichalcogenides (TMDCs) offer an ideal platform to explore valley-selective physics with promising applications in valleytronics and information processing. Here we manipulate the energetic degeneracy of the $\mathrm{K}^+$ and $\mathrm{K}^-$ valleys in few-layer TMDCs. We perform high-field magneto-reflectance spectroscopy on WSe$_2$, MoSe$_2$, and MoTe$_2$ crystals of thickness from monolayer to the bulk limit under magnetic fields up to 30 T applied perpendicular to the sample plane. Because of a strong spin-layer locking, the ground state A excitons exhibit a monolayer-like valley Zeeman splitting with a negative $g$-factor, whose magnitude increases monotonically when thinning the crystal down from bulk to a monolayer. Using the $\mathbf{k\cdot p}$ calculation, we demonstrate that the observed evolution of $g$-factors for different materials is well accounted for by hybridization of electronic states in the $\mathrm{K}^+$ and $\mathrm{K}^-$ valleys. The mixing of the valence and conduction band states induced by the interlayer interaction decreases the $g$-factor magnitude with an increasing layer number. The effect is the largest for MoTe$_2$, followed by MoSe$_2$, and smallest for WSe$_2$. Keywords: MoSe$_2$, WSe$_2$, MoTe$_2$, valley Zeeman splitting, transition metal dichalcogenides, excitons, magneto optics.

cond-mat.mes-hall↗

arXiv2018

Thickness-Dependent Differential Reflectance Spectra of Monolayer and Few-Layer MoS2, MoSe2, WS2 and WSe2

The research field of two dimensional (2D) materials strongly relies on optical microscopy characterization tools to identify atomically thin materials and to determine their number of layers. Moreover, optical microscopy-based techniques opened the door to study the optical properties of these nanomaterials. We presented a comprehensive study of the differential reflectance spectra of 2D semiconducting transition metal dichalcogenides (TMDCs), MoS2, MoSe2, WS2, and WSe2, with thickness ranging from one layer up to six layers. We analyzed the thickness-dependent energy of the different excitonic features, indicating the change in the band structure of the different TMDC materials with the number of layers. Our work provided a route to employ differential reflectance spectroscopy for determining the number of layers of MoS2, MoSe2, WS2, and WSe2.

cond-mat.mtrl-sci↗

arXiv2018

Biaxial strain in atomically thin transition metal dichalcogenides

Strain engineering in single-layer semiconducting transition metal dichalcogenides aims to tune their bandgap energy and to modify their optoelectronic properties by the application of external strain. In this paper we study transition metal dichalcogenides monolayers deposited on polymeric substrates under the application of biaxial strain, both tensile and compressive. We can control the amount of biaxial strain applied by letting the substrate thermally expand or compress by changing the substrate temperature. After modelling the substrate-dependent strain transfer process with a finite elements simulation, we performed micro-differential spectroscopy of four transition metal dichalcogenides monolayers (MoS2, MoSe2, WS2, WSe2) under the application of biaxial strain and measured their optical properties. For tensile strain we observe a redshift of the bandgap that reaches a value as large as 94 meV/% in the case of single-layer WS2 deposited on polypropylene. The observed bandgap shifts as a function of substrate extension/compression follow the order WS2 > WSe2 > MoS2 > MoSe2.

cond-mat.mtrl-sci↗

arXiv2017

Phonon Sidebands in Transition Metal Dichalcogenides

Excitons dominate the optical properties of monolayer transition metal dichalcogenides (TMDs). Besides optically accessible bright exciton states, TMDs exhibit also a multitude of optically forbidden dark excitons. Here, we show that efficient exciton-phonon scattering couples bright and dark states and gives rise to an asymmetric excitonic line shape. The observed asymmetry can be traced back to phonon-induced sidebands that are accompanied by a polaron redshift. We present a joint theory-experiment study investigating the microscopic origin of these sidebands in different TMD materials taking into account intra- and intervalley scattering channels opened by optical and acoustic phonons. The gained insights contribute to a better understanding of the optical fingerprint of these technologically promising nanomaterials.

cond-mat.mes-hall↗

arXiv2017

Valley Dynamics of Excitons in Monolayer Dichalcogenides

Monolayer transition-metal dichalcogenides (TMDCs) have recently emerged as possible candidates for valleytronic applications, as the spin and valley pseudospin are directly coupled and stabilized by a large spin splitting. In these semiconducting materials, optically excited electron-hole pairs form tightly Coulomb-bound excitons with large binding energies. The selection rules for excitonic transitions allow for direct optical generation of a valley-polarized exciton population using resonant excitation. Here, we investigate the exciton valley dynamics in monolayers of three different TMDCs by means of time-resolved Kerr rotation at low temperatures. We observe pronounced differences in the valley dynamics of tungsten- and molybdenum-based TMDCs, which are directly related to the opposite order of the conduction-band spin splitting in these materials.

cond-mat.mes-hall↗

arXiv2017

Dark and bright exciton formation, thermalization, and photoluminescence in monolayer transition metal dichalcogenides

The remarkably strong Coulomb interaction in atomically thin transition metal dichalcogenides (TMDs) results in an extraordinarily rich many-particle physics including the formation of tightly bound excitons. Besides optically accessible bright excitonic states, these materials also exhibit a variety of dark excitons. Since they can even lie below the bright states, they have a strong influence on the exciton dynamics, lifetimes, and photoluminescence. While very recently, the presence of dark excitonic states has been experimentally demonstrated, the origin of these states, their formation, and dynamics have not been revealed yet. Here, we present a microscopic study shedding light on time- and energy-resolved formation and thermalization of bright and dark intra- and intervalley excitons as well as their impact on the photoluminescence in different TMD materials. We demonstrate that intervalley dark excitons, so far widely overlooked in current literature, play a crucial role in tungsten-based TMDs giving rise to an enhanced photoluminescence and reduced exciton lifetimes at elevated temperatures.

cond-mat.mes-hall↗

arXiv2017

Biaxial strain tuning of the optical properties of single-layer transition metal dichalcogenides

Since their discovery single-layer semiconducting transition metal dichalcogenides have attracted much attention thanks to their outstanding optical and mechanical properties. Strain engineering in these two-dimensional materials aims to tune their bandgap energy and to modify their optoelectronic properties by the application of external strain. In this paper we demonstrate that biaxial strain, both tensile and compressive, can be applied and released in a timescale of a few seconds in a reproducible way on transition metal dichalcogenides monolayers deposited on polymeric substrates. We can control the amount of biaxial strain applied by letting the substrate expand or compress. To do this we change the substrate temperature and choose materials with a large thermal expansion coefficient. After the investigation of the substrate-dependent strain transfer, we performed micro-differential spectroscopy of four transition metal dichalcogenides monolayers (MoS2, MoSe2, WS2, WSe2) under the application of biaxial strain and measured their optical properties. For tensile strain we observe a redshift of the bandgap that reaches a value as large as 95 meV/% in the case of single-layer WS2 deposited on polypropylene. The observed bandgap shifts as a function of substrate extension/compression follow the order MoSe2 < MoS2 < WSe2 < WS2. Theoretical calculations of these four materials under biaxial strain predict the same trend for the material-dependent rates of the shift and reproduce well the features observed in the measured reflectance spectra.

cond-mat.mes-hall↗

arXiv2016

Micro-reflectance and transmittance spectroscopy: a versatile and powerful tool to characterize 2D materials

Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques to study 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup to carry out differential reflectance and transmittance spectroscopy in 2D materials with a lateral resolution of ~1 micron in the visible and near-infrared part of the spectrum. We demonstrate the potential of the presented setup to determine the number of layers of 2D materials and to characterize their fundamental optical properties such as excitonic resonances. We illustrate its performance by studying mechanically exfoliated and chemical vapor-deposited transition metal dichalcogenide samples.

cond-mat.mes-hall↗

arXiv2016

Excitonic valley effects in monolayer WS$_2$ under high magnetic fields

Transition-metal dichalcogenides can be easily produced as atomically thin sheets, exhibiting the possibility to optically polarize and read out the valley pseudospin of extremely stable excitonic quasiparticles present in these 2D semiconductors. Here, we investigate a monolayer of tungsten disulphide in high magnetic fields up to 30\,T via photoluminescence spectroscopy at low temperatures. The valley degeneracy is lifted for all optical features, particularly for excitons, singlet and triplet trions, for which we determine the g factor separately. While the observation of a diamagnetic shift of the exciton and trion resonances gives us insight into the real-space extension of these quasiparticles, magnetic field induced valley polarization effects shed light onto the exciton and trion dispersion relations in reciprocal space. The field dependence of the trion valley polarizations is in line with the predicted trion splitting into singlet and triplet configurations.

cond-mat.mes-hall↗

arXiv2015

Precise and reversible band gap tuning in single-layer MoSe2 by uniaxial strain

We present photoluminescence (PL) spectroscopy measurements of single-layer MoSe2 as a function of uniform uniaxial strain. A simple clamping and bending method is described that allows for application of uniaxial strain to layered, 2D materials with strains up to 1.1% without slippage. Using this technique, we find that the electronic band gap of single layer MoSe2 can be reversibly tuned by -27 +- 2 meV per percent of strain. This is in agreement with our density-functional theory calculations, which estimate a modulation of -32 meV per percent of strain, taking into account the role of deformation of the underlying substrate upon bending. Finally, due to its narrow PL spectra as compared with that of MoS2, we show that MoSe2 provides a more precise determination of small changes in strain making it the ideal 2D material for strain applications.

cond-mat.mtrl-sci↗

arXiv2015

Enhanced Visibility of MoS2, MoSe2, WSe2 and Black Phosphorus: Making Optical Identification of 2D Semiconductors Easier

We explore the use of Si3N4/Si substrates as a substitute of the standard SiO2/Si substrates employed nowadays to fabricate nanodevices based on 2D materials. We systematically study the visibility of several 2D semiconducting materials that are attracting a great deal of interest in nanoelectronics and optoelectronics: MoS2, MoSe2, WSe2 and black phosphorus. We find that the use of Si3N4/Si substrates provides an increase of the optical contrast up to a 50%-100% and also the maximum contrast shifts towards wavelength values optimal for human eye detection, making optical identification of 2D semiconductors easier.

cond-mat.mes-hall↗

arXiv2014

Photovoltaic and photothermoelectric effect in a double-gated WSe2 device

Tungsten diselenide (WSe2), a semiconducting transition metal dichalcogenide (TMDC), shows great potential as active material in optoelectronic devices due to its ambipolarity and direct bandgap in its single-layer form. Recently, different groups have exploited the ambipolarity of WSe2 to realize electrically tunable PN junctions, demonstrating its potential for digital electronics and solar cell applications. In this Letter, we focus on the different photocurrent generation mechanisms in a double-gated WSe2 device by measuring the photocurrent (and photovoltage) as the local gate voltages are varied independently in combination with above- and below-bandgap illumination. This enables us to distinguish between two main photocurrent generation mechanisms: the photovoltaic and photothermoelectric effect. We find that the dominant mechanism depends on the defined gate configuration. In the PN and NP configurations, photocurrent is mainly generated by the photovoltaic effect and the device displays a maximum responsivity of 0.70 mA/W at 532 nm illumination and rise and fall times close to 10 ms. Photocurrent generated by the photothermoelectric effect emerges in the PP configuration and is a factor of two larger than the current generated by the photovoltaic effect (in PN and NP configurations). This demonstrates that the photothermoelectric effect can play a significant role in devices based on WSe2 where a region of strong optical absorption, caused by e.g. an asymmetry in flake thickness or optical absorption of the electrodes, generates a sizeable thermal gradient upon illumination.

cond-mat.mes-hall↗

arXiv2012

Femtosecond nonlinear ultrasonics in gold probed with ultrashort surface plasmons

Fundamental interactions induced by lattice vibrations on ultrafast time scales become increasingly important for modern nanoscience and technology. Experimental access to the physical properties of acoustic phonons in the THz frequency range and over the entire Brillouin zone is crucial for understanding electric and thermal transport in solids and their compounds. Here, we report on the generation and nonlinear propagation of giant (1 percent) acoustic strain pulses in hybrid gold/cobalt bilayer structures probed with ultrafast surface plasmon interferometry. This new technique allows for unambiguous characterization of arbitrary ultrafast acoustic transients. The giant acoustic pulses experience substantial nonlinear reshaping already after a propagation distance of 100 nm in a crystalline gold layer. Excellent agreement with the Korteveg-de Vries model points to future quantitative nonlinear femtosecond THz-ultrasonics at the nano-scale in metals at room temperature.

physics.optics↗

arXiv2011

Single Defect Centers in Diamond Nanocrystals as Quantum Probes for Plasmonic Nanostructures

We present two applications of a single nitrogen vacancy center in a nanodiamond as quantum probe for plasmonic nanostructures. Coupling to the nanostructures is achieved in a highly controlled manner by picking up a pre-characterized nanocrystal with an atomic force microscope and placing it at the desired position. Local launching of single excitations into a nanowire with a spatial control of few nanometers is demonstrated. Further, a two dimensional map of the electromagnetic environment of a plasmonic bowtie antenna was derived, resembling an ultimate limit of fluorescence lifetime nanoscopy.

physics.optics↗