arXiv subjects

Rui Zhang

Publications and source records attributed to Rui Zhang.

At least 1,099 records · Page 61Linked to original sources

arXiv2019

On the Secrecy Capacity of a Full-Duplex Wirelessly Powered Communication System

In this paper, we investigate the secrecy capacity of a point-to-point, full-duplex (FD) wirelesly powered communication system in the presence of a passive eavesdropper (EVE). The considered system is comprised of an energy transmitter (ET), an energy harvesting user (EHU), and a passive EVE. The ET transmits radio-frequency energy, which is used for powering the EHU as well as for generating interference at the EVE. The EHU uses the energy harvested from the ET to transmit confidential messages back to the ET. As a consequence of the FD mode of operation, both the EHU and the ET are subjected to self-interference, which has different effects at the two nodes. In particular, the self-interference impairs the decoding of the received message at the ET, whilst it serves as an additional energy source at the EHU. For this system model, we derive an upper and a lower bound on the secrecy capacity. For the lower bound, we propose a simple achievability scheme. Our numerical results show significant improvements in terms of achievable secrecy rate when the proposed communication scheme is employed against its half-duplex counterpart, even for practical self-interference values at the ET.

cs.IT↗

arXiv2019

IRS-Enhanced OFDM: Power Allocation and Passive Array Optimization

Intelligent reflecting surface (IRS) is a promising new technology for achieving spectrum and energy efficient wireless communication systems in the future. By adaptively varying the incident signals' phases/amplitudes and thereby establishing favorable channel responses through a large number of reconfigurable passive reflecting elements, IRS is able to enhance the communication performance of mobile users in its vicinity cost-effectively. In this paper, we study an IRS-enhanced orthogonal frequency division multiplexing (OFDM) system in which an IRS is deployed to assist the communication between a nearby user and its associated base station (BS). We aim to maximize the downlink achievable rate for the user by jointly optimizing the transmit power allocation at the BS and the passive array reflection coefficients at the IRS. Although the formulated problem is non-convex and thus difficult to solve, we propose an efficient algorithm to obtain a high-quality suboptimal solution for it, by alternately optimizing the BS's power allocation and the IRS's passive array coefficients in an iterative manner, along with a customized method for the initialization. Simulation results show that the proposed design significantly improves the OFDM link rate performance as compared to the cases without the IRS or with other heuristic IRS designs.

eess.SP↗

arXiv2019

Security and Privacy on Blockchain

Blockchain offers an innovative approach to storing information, executing transactions, performing functions, and establishing trust in an open environment. Many consider blockchain as a technology breakthrough for cryptography and cybersecurity, with use cases ranging from globally deployed cryptocurrency systems like Bitcoin, to smart contracts, smart grids over the Internet of Things, and so forth. Although blockchain has received growing interests in both academia and industry in the recent years, the security and privacy of blockchains continue to be at the center of the debate when deploying blockchain in different applications. This paper presents a comprehensive overview of the security and privacy of blockchain. To facilitate the discussion, we first introduce the notion of blockchains and its utility in the context of Bitcoin like online transactions. Then we describe the basic security properties that are supported as the essential requirements and building blocks for Bitcoin like cryptocurrency systems, followed by presenting the additional security and privacy properties that are desired in many blockchain applications. Finally, we review the security and privacy techniques for achieving these security properties in blockchain-based systems, including representative consensus algorithms, hash chained storage, mixing protocols, anonymous signatures, non-interactive zero-knowledge proof, and so forth. We conjecture that this survey can help readers to gain an in-depth understanding of the security and privacy of blockchain with respect to concept, attributes, techniques and systems.

cs.CR↗

arXiv2019

Cellular-Connected UAV: Uplink Association, Power Control and Interference Coordination

The line-of-sight (LoS) air-to-ground channel brings both opportunities and challenges in cellular-connected unmanned aerial vehicle (UAV) communications. On one hand, the LoS channels make more cellular base stations (BSs) visible to a UAV as compared to the ground users, which leads to a higher macro-diversity gain for UAV-BS communications. On the other hand, they also render the UAV to impose/suffer more severe uplink/downlink interference to/from the BSs, thus requiring more sophisticated inter-cell interference coordination (ICIC) techniques with more BSs involved. In this paper, we consider the uplink transmission from a UAV to cellular BSs, under spectrum sharing with the existing ground users. To investigate the optimal ICIC design and air-ground performance trade-off, we maximize the weighted sum-rate of the UAV and existing ground users by jointly optimizing the UAV's uplink cell associations and power allocations over multiple resource blocks. However, this problem is non-convex and difficult to be solved optimally. We first propose a centralized ICIC design to obtain a locally optimal solution based on the successive convex approximation (SCA) method. As the centralized ICIC requires global information of the network and substantial information exchange among an excessively large number of BSs, we further propose a decentralized ICIC scheme of significantly lower complexity and signaling overhead for implementation, by dividing the cellular BSs into small-size clusters and exploiting the LoS macro-diversity for exchanging information between the UAV and cluster-head BSs only. Numerical results show that the proposed centralized and decentralized ICIC schemes both achieve a near-optimal performance, and draw important design insights based on practical system setups.

cs.IT↗

arXiv2019

A Hybrid Approach to Privacy-Preserving Federated Learning

Federated learning facilitates the collaborative training of models without the sharing of raw data. However, recent attacks demonstrate that simply maintaining data locality during training processes does not provide sufficient privacy guarantees. Rather, we need a federated learning system capable of preventing inference over both the messages exchanged during training and the final trained model while ensuring the resulting model also has acceptable predictive accuracy. Existing federated learning approaches either use secure multiparty computation (SMC) which is vulnerable to inference or differential privacy which can lead to low accuracy given a large number of parties with relatively small amounts of data each. In this paper, we present an alternative approach that utilizes both differential privacy and SMC to balance these trade-offs. Combining differential privacy with secure multiparty computation enables us to reduce the growth of noise injection as the number of parties increases without sacrificing privacy while maintaining a pre-defined rate of trust. Our system is therefore a scalable approach that protects against inference threats and produces models with high accuracy. Additionally, our system can be used to train a variety of machine learning models, which we validate with experimental results on 3 different machine learning algorithms. Our experiments demonstrate that our approach out-performs state of the art solutions.

cs.LG↗

arXiv2019

Experimental quantum repeater without quantum memory

Quantum repeaters -- important components of a scalable quantum internet -- enable the entanglement to be distributed over long distances. The standard paradigm for a quantum repeater relies on a necessary demanding requirement of quantum memory. Despite significant progress, the limited performance of quantum memory makes practical quantum repeaters still a great challenge. Remarkably, a proposed all-photonic quantum repeater avoids the need for quantum memory by harnessing the graph states in the repeater nodes. Here we perform an experimental demonstration of an all-photonic quantum repeater using linear optics. By manipulating a 12-photon interferometer, we implement a 2-by-2 parallel all-photonic quantum repeater, and observe an 89% enhancement of entanglement-generation rate over the standard parallel entanglement swapping. These results open a new way towards designing repeaters with efficient single-photon sources and photonic graph states, and suggest that the all-photonic scheme represents an alternative path -- parallel to that of matter-memory-based schemes -- towards realizing practical quantum repeaters.

quant-ph↗

arXiv2019

Boosted GAN with Semantically Interpretable Information for Image Inpainting

Image inpainting aims at restoring missing region of corrupted images, which has many applications such as image restoration and object removal. However, current GAN-based inpainting models fail to explicitly consider the semantic consistency between restored images and original images. Forexample, given a male image with image region of one eye missing, current models may restore it with a female eye. This is due to the ambiguity of GAN-based inpainting models: these models can generate many possible restorations given a missing region. To address this limitation, our key insight is that semantically interpretable information (such as attribute and segmentation information) of input images (with missing regions) can provide essential guidance for the inpainting process. Based on this insight, we propose a boosted GAN with semantically interpretable information for image inpainting that consists of an inpainting network and a discriminative network. The inpainting network utilizes two auxiliary pretrained networks to discover the attribute and segmentation information of input images and incorporates them into the inpainting process to provide explicit semantic-level guidance. The discriminative network adopts a multi-level design that can enforce regularizations not only on overall realness but also on attribute and segmentation consistency with the original images. Experimental results show that our proposed model can preserve consistency on both attribute and segmentation level, and significantly outperforms the state-of-the-art models.

cs.CV↗

arXiv2019

Intelligent Reflecting Surface Enhanced Wireless Network via Joint Active and Passive Beamforming

Intelligent reflecting surface (IRS) is envisioned to be a new and revolutionizing technology for achieving spectrum and energy efficient wireless communication networks cost-effectively in the future. Specifically, an IRS consists of a large number of low-cost passive elements each reflecting the incident signal with a certain phase shift to collaboratively achieve beamforming and/or interference suppression at designated receivers. In this paper, we study an IRS-aided multiuser multiple-input single-output (MISO) wireless system where one IRS is deployed to assist in the communication from a multi-antenna access point (AP) to multiple single-antenna users. As such, each user receives the superposed signals from the AP as well as the IRS via its reflection. We aim to minimize the total transmit power at the AP by jointly optimizing the transmit beamforming by active antenna array at the AP and reflect beamforming by passive phase shifters at the IRS, subject to users' individual signal-to-interference-plus-noise ratio (SINR) constraints. However, the formulated problem is non-convex and difficult to be solved optimally.

cs.IT↗

arXiv2019

MMF: Attribute Interpretable Collaborative Filtering

Collaborative filtering is one of the most popular techniques in designing recommendation systems, and its most representative model, matrix factorization, has been wildly used by researchers and the industry. However, this model suffers from the lack of interpretability and the item cold-start problem, which limit its reliability and practicability. In this paper, we propose an interpretable recommendation model called Multi-Matrix Factorization (MMF), which addresses these two limitations and achieves the state-of-the-art prediction accuracy by exploiting common attributes that are present in different items. In the model, predicted item ratings are regarded as weighted aggregations of attribute ratings generated by the inner product of the user latent vectors and the attribute latent vectors. MMF provides more fine grained analyses than matrix factorization in the following ways: attribute ratings with weights allow the understanding of how much each attribute contributes to the recommendation and hence provide interpretability; the common attributes can act as a link between existing and new items, which solves the item cold-start problem when no rating exists on an item. We evaluate the interpretability of MMF comprehensively, and conduct extensive experiments on real datasets to show that MMF outperforms state-of-the-art baselines in terms of accuracy.

cs.IR↗

arXiv2019

CARL: Aggregated Search with Context-Aware Module Embedding Learning

Aggregated search aims to construct search result pages (SERPs) from blue-links and heterogeneous modules (such as news, images, and videos). Existing studies have largely ignored the correlations between blue-links and heterogeneous modules when selecting the heterogeneous modules to be presented. We observe that the top ranked blue-links, which we refer to as the \emph{context}, can provide important information about query intent and helps identify the relevant heterogeneous modules. For example, informative terms like "streamed" and "recorded" in the context imply that a video module may better satisfy the query. To model and utilize the context information for aggregated search, we propose a model with context attention and representation learning (CARL). Our model applies a recurrent neural network with an attention mechanism to encode the context, and incorporates the encoded context information into module embeddings. The context-aware module embeddings together with the ranking policy are jointly optimized under the Markov decision process (MDP) formulation. To achieve a more effective joint learning, we further propose an optimization function with self-supervision loss to provide auxiliary supervision signals. Experimental results based on two public datasets demonstrate the superiority of CARL over multiple baseline approaches, and confirm the effectiveness of the proposed optimization function in boosting the joint learning process.

cs.IR↗

arXiv2019

Jamming-assisted Proactive Eavesdropping over Two Suspicious Communication Links

This paper studies a new and challenging wireless surveillance problem where a legitimate monitor attempts to eavesdrop two suspicious communication links simultaneously. To facilitate concurrent eavesdropping, our multi-antenna legitimate monitor employs a proactive eavesdropping via jamming approach, by selectively jamming suspicious receivers to lower the transmission rates of the target links. In particular, we are interested in characterizing the achievable eavesdropping rate region for the minimum-mean-squared-error (MMSE) receiver case, by optimizing the legitimate monitor's jamming transmit covariance matrix subject to its power budget. As the monitor cannot hear more than what suspicious links transmit, the achievable eavesdropping rate region is essentially the intersection of the achievable rate region for the two suspicious links and that for the two eavesdropping links. The former region can be purposely altered by the monitor's jamming transmit covariance matrix, whereas the latter region is fixed when the MMSE receiver is employed. Therefore, we first analytically characterize the achievable rate region for the two suspicious links via optimizing the jamming transmit covariance matrix and then obtain the achievable eavesdropping rate region for the MMSE receiver case. Furthermore, we also extend our study to the MMSE with successive interference cancellation (MMSE-SIC) receiver case and characterize the corresponding achievable eavesdropping rate region by jointly optimizing the time-sharing factor between different decoding orders. Finally, numerical results are provided to corroborate our analysis and examine the eavesdropping performance.

eess.SP↗

arXiv2019

Safeguarding Wireless Network with UAVs: A Physical Layer Security Perspective

Integrating unmanned aerial vehicles (UAVs) into future wireless systems such as the fifth-generation (5G) cellular network is anticipated to bring significant benefits for both UAV and telecommunication industries. Generally speaking, UAVs can be used as new aerial platforms in the cellular network to provide communication services for terrestrial users, or become new aerial users of the cellular network served by the terrestrial base stations. Due to their high altitude, UAVs usually have dominant line-of-sight (LoS) channels with the ground nodes, which, however, pose new security challenges to future wireless networks with widely deployed UAVs. On one hand, UAV-ground communications are more prone than terrestrial communications to eavesdropping and jamming attacks by malicious nodes on the ground. On the other hand, compared to malicious ground nodes, malicious UAVs can launch more effective eavesdropping and jamming attacks to terrestrial communications. Motivated by the above, in this article, we aim to identify such new issues from a physical-layer security viewpoint and propose novel solutions to tackle them efficiently. Numerical results are provided to validate their effectiveness and promising directions for future research are also discussed.

cs.IT↗

arXiv2019

Receding Horizon Optimization for Energy-Efficient UAV Communication

In this letter, we study a wireless communication system with a fixed-wing unmanned aerial vehicle (UAV) employed to collect information from a group of ground nodes (GNs). Our objective is to maximize the UAV's energy efficiency (EE), which is defined as the achievable rate among all GNs per unit propulsion energy consumption of the UAV. To efficiently solve this problem with continuous-time functions, we propose a new method based on receding horizon optimization (RHO), which significantly reduces the computational complexity compared to the conventional time discretization method. Specifically, we sequentially solve the EE maximization problem over a moving time-window of finite duration, for each of which the number of optimization variables is greatly reduced. Simulation results are provided to show the effectiveness of the proposed method.

cs.IT↗

arXiv2019

Cognitive UAV Communication via Joint Maneuver and Power Control

This paper investigates a new scenario of spectrum sharing between unmanned aerial vehicle (UAV) and terrestrial wireless communication, in which a cognitive/secondary UAV transmitter communicates with a ground secondary receiver (SR), in the presence of a number of primary terrestrial communication links that operate over the same frequency band. We exploit the UAV's mobility in three-dimensional (3D) space to improve its cognitive communication performance while controlling the co-channel interference at the primary receivers (PRs), such that the received interference power at each PR is below a prescribed threshold termed as interference temperature (IT). First, we consider the quasi-stationary UAV scenario, where the UAV is placed at a static location during each communication period of interest. In this case, we jointly optimize the UAV's 3D placement and power control to maximize the SR's achievable rate, subject to the UAV's altitude and transmit power constraints, as well as a set of IT constraints at the PRs to protect their communications. Next, we consider the mobile UAV scenario, in which the UAV is dispatched to fly from an initial location to a final location within a given task period. We propose an efficient algorithm to maximize the SR's average achievable rate over this period by jointly optimizing the UAV's 3D trajectory and power control, subject to the additional constraints on UAV's maximum flying speed and initial/final locations. Finally, numerical results are provided to evaluate the performance of the proposed designs for different scenarios, as compared to various benchmark schemes. It is shown that in the quasi-stationary scenario the UAV should be placed at its minimum altitude while in the mobile scenario the UAV should adjust its altitude along with horizontal trajectory, so as to maximize the SR's achievable rate in both scenarios.

cs.IT↗

arXiv2019

A Learning-Based Two-Stage Spectrum Sharing Strategy with Multiple Primary Transmit Power Levels

Multi-parameter cognition in a cognitive radio network (CRN) provides a more thorough understanding of the radio environments, and could potentially lead to far more intelligent and efficient spectrum usage for a secondary user. In this paper, we investigate the multi-parameter cognition problem for a CRN where the primary transmitter (PT) radiates multiple transmit power levels, and propose a learning-based two-stage spectrum sharing strategy. We first propose a data-driven/machine learning based multi-level spectrum sensing scheme, including the spectrum learning (Stage I) and prediction (the first part in Stage II). This fully blind sensing scheme does not require any prior knowledge of the PT power characteristics. Then, based on a novel normalized power level alignment metric, we propose two prediction-transmission structures, namely periodic and non-periodic, for spectrum access (the second part in Stage II), which enable the secondary transmitter (ST) to closely follow the PT power level variation. The periodic structure features a fixed prediction interval, while the non-periodic one dynamically determines the interval with a proposed reinforcement learning algorithm to further improve the alignment metric. Finally, we extend the prediction-transmission structure to an online scenario, where the number of PT power levels might change as a consequence of PT adapting to the environment fluctuation or quality of service variation. The simulation results demonstrate the effectiveness of the proposed strategy in various scenarios.

eess.SP↗

arXiv2019

Wireless Communications Through Reconfigurable Intelligent Surfaces

The future of mobile communications looks exciting with the potential new use cases and challenging requirements of future 6th generation (6G) and beyond wireless networks. Since the beginning of the modern era of wireless communications, the propagation medium has been perceived as a randomly behaving entity between the transmitter and the receiver, which degrades the quality of the received signal due to the uncontrollable interactions of the transmitted radio waves with the surrounding objects. The recent advent of reconfigurable intelligent surfaces in wireless communications enables, on the other hand, network operators to control the scattering, reflection, and refraction characteristics of the radio waves, by overcoming the negative effects of natural wireless propagation. Recent results have revealed that reconfigurable intelligent surfaces can effectively control the wavefront, e.g., the phase, amplitude, frequency, and even polarization, of the impinging signals without the need of complex decoding, encoding, and radio frequency processing operations. Motivated by the potential of this emerging technology, the present article is aimed to provide the readers with a detailed overview and historical perspective on state-of-the-art solutions, and to elaborate on the fundamental differences with other technologies, the most important open research issues to tackle, and the reasons why the use of reconfigurable intelligent surfaces necessitates to rethink the communication-theoretic models currently employed in wireless networks. This article also explores theoretical performance limits of reconfigurable intelligent surface-assisted communication systems using mathematical techniques and elaborates on the potential use cases of intelligent surfaces in 6G and beyond wireless networks.

eess.SP↗

arXiv2019

A Strong Feature Representation for Siamese Network Tracker

Object tracking has important application in assistive technologies for personalized monitoring. Recent trackers choosing AlexNet as their backbone to extract features have gained great success. However, AlexNet is too shallow to form a strong feature representation, the tracker based on the Siamese network have an accuracy gap compared with state-of-the-art algorithms. To solve this problem, this paper proposes a tracker called SiamPF. Firstly, the modified pre-trained VGG16 network is fine-tuned as the backbone. Secondly, an AlexNet-like branch is added after the third convolutional layer and merged with the response map of the backbone network to form a preliminary strong feature representation. And then, a channel attention block is designed to adaptively select the contribution features. Finally, the APCE is modified to process the response map to reduce interference and focus the tracker on the target. Our SiamPF only used ILSVRC2015-VID for training, but it achieved excellent performance on OTB-2013 / OTB-2015 / VOT2015 / VOT2017, while maintaining the real-time performance of 41FPS on the GTX 1080Ti.

cs.CV↗

arXiv2019

Mining Twitter to Assess the Determinants of Health Behavior towards Human Papillomavirus Vaccination in the United States

Objectives To test the feasibility of using Twitter data to assess determinants of consumers' health behavior towards Human papillomavirus (HPV) vaccination informed by the Integrated Behavior Model (IBM). Methods We used three Twitter datasets spanning from 2014 to 2018. We preprocessed and geocoded the tweets, and then built a rule-based model that classified each tweet into either promotional information or consumers' discussions. We applied topic modeling to discover major themes, and subsequently explored the associations between the topics learned from consumers' discussions and the responses of HPV-related questions in the Health Information National Trends Survey (HINTS). Results We collected 2,846,495 tweets and analyzed 335,681 geocoded tweets. Through topic modeling, we identified 122 high-quality topics. The most discussed consumer topic is "cervical cancer screening"; while in promotional tweets, the most popular topic is to increase awareness of "HPV causes cancer". 87 out of the 122 topics are correlated between promotional information and consumers' discussions. Guided by IBM, we examined the alignment between our Twitter findings and the results obtained from HINTS. 35 topics can be mapped to HINTS questions by keywords, 112 topics can be mapped to IBM constructs, and 45 topics have statistically significant correlations with HINTS responses in terms of geographic distributions. Conclusion Not only mining Twitter to assess consumers' health behaviors can obtain results comparable to surveys but can yield additional insights via a theory-driven approach. Limitations exist, nevertheless, these encouraging results impel us to develop innovative ways of leveraging social media in the changing health communication landscape.

cs.SI↗