arXiv subjects

Ruikang Li

Publications and source records attributed to Ruikang Li.

7 recordsLinked to original sources

arXiv2026

PHY-Layer Modeling and Throughput-Driven Adaptation for Batteryless V2X Networks

Passive overlay communication for batteryless devices is an important enabling capability for next-generation vehicle-to-everything (V2X) networks. However, enabling reliable passive payload delivery without occupying additional spectrum remains challenging, since overlay signaling must be embedded into short and time-varying vehicular packets while preserving the decodability of the legacy host transmission. This paper investigates a packetized batteryless V2X overlay architecture in which a dedicated short-range communications (DSRC)-based packet simultaneously carries conventional V2X data and a passive overlay payload. A compact PHY-layer model is developed to characterize the coupled effects of attenuation depth, embedded-bit rate, and legacy modulation and coding scheme (MCS) on host-link and passive-link reliability, as well as packet-level embedding feasibility. We then formulate a sum-throughput maximization problem that jointly accounts for the legacy packet error rate and passive decoding error rate. We further propose a multi-agent reinforcement learning (MARL)-based adaptive parameter-selection method. Simulation results show that the proposed MARL controller achieves stable convergence and improves the average throughput by 15\%, demonstrating the effectiveness of throughput-driven PHY adaptation for batteryless V2X overlay communications.

eess.SY↗

arXiv2026

Color Pass-Through via Camera-Display Coupling

When a real-world scene is captured by a smartphone camera and viewed on its screen, the displayed image often differs noticeably from the original scene in color, brightness, and contrast. This gap persists despite substantial advances in both modern cameras and displays. A key reason is that most pipelines factor the high-dimensional capture-to-display process into two separately calibrated camera and display stages, and then connect them through low-dimensional color transforms, leading to information bottlenecks and inevitable error accumulation. To address this systemic challenge, we propose Color Pass-Through, an end-to-end learned framework that operates directly on captured images. Our key insight is to treat the camera and display as a coupled system rather than calibrating them in isolation. Coupling the camera and display yields two practical advantages: (1) it brings the entire real-world scenes to the display via end-to-end optimization, and (2) it allows efficient one-step calibration for each distinct observer via complete capture-to-display path. We validate Color Pass-Through using both digital and human observers. Compared with representative baselines, our method achieves an average gain of +2.0 points on a 5-point user study and more than 2x improvement on quantitative metrics, demonstrating improved reproduction of the perceived color of the original scene.

cs.CV↗

arXiv2026

InstantRetouch: Efficient and High-Fidelity Instruction-Guided Image Retouching with Bilateral Space

Language-guided photo retouching aims to adjust color and tone while preserving geometry and texture. Recently, diffusion-based retouching shows a superior visual quality, but often struggles with both fidelity issues due to its generative nature and efficiency because of its iterative sampling process. In this work, we propose an efficient and fidelity-preserving retouching method using bilateral space manipulation, which is both compact and content-decoupled. Specifically, instead of directly editing pixels or image latents, our model predicts a low-resolution bilateral grid of affine transforms, which are sliced using a learned guidance map and then applied to the full-resolution image. This approach yields both high fidelity and improved efficiency. To retain strong priors of a pretrained generative model, we distill a multi-step diffusion model into our bilateral grid framework using Variational Score Distillation, complemented by a prompt alignment loss to guide instruction-following behavior. Additionally, we introduce a new benchmark and evaluate our method across multiple dimensions: fidelity, instruction following, and efficiency. Compared to the latest retouch methods, like Gemini-2.5-Flash (Nano-Banana), our method can avoid content drift, significantly improve latency, and generate visually pleasing edits, while maintaining a high level of fidelity. Project page: https://openimaginglab.github.io/InstantRetouch/.

cs.CV↗

arXiv2026

CeProAgents: A Hierarchical Agents System for Automated Chemical Process Development

The development of chemical processes, a cornerstone of chemical engineering, presents formidable challenges due to its multi-faceted nature, integrating specialized knowledge, conceptual design, and parametric simulation. Capitalizing on this, we propose CeProAgents, a hierarchical multi-agent system designed to automate the development of chemical process through collaborative division of labor. Our architecture comprises three specialized agent cohorts focused on knowledge, concept, and parameter respectively. To effectively adapt to the inherent complexity of chemical tasks, each cohort employs a novel hybrid architecture that integrates dynamic agent chatgroups with structured agentic workflows. To rigorously evaluate the system, we establish CeProBench, a multi-dimensional benchmark structured around three core pillars of chemical engineering. We design six distinct types of tasks across these dimensions to holistically assess the comprehensive capabilities of the system in chemical process development. The results not only confirm the effectiveness and superiority of our proposed approach but also reveal the transformative potential as well as the current boundaries of Large Language Models (LLMs) for industrial chemical engineering.

cs.AI↗

arXiv2025

Noise-tolerant correlated coincidence imaging based on super-correlated light at 1550 nm

Single-photon-level imaging at 1550 nm is a key driver for significant advancements in the next-generation laser detection technology. This cutting-edge approach plays a vital role in space ranging, target recognition, and three-dimensional remote sensing. However, it has faced severe challenges such as insufficient noise-tolerant performance. Here, we introduced noise-tolerant correlated coincidence imaging (CCI) based on super-correlated light. The light source, generated through nonlinear interaction between a pulsed laser and a photonic crystal fiber, exhibits a broader power-law photon number probability distribution and extremely strong photon correlation (with second-order correlation function $g^{(2)}(0)$ up to 18,166). Our noise-tolerant CCI can resist random environmental noise up to 100,000 times stronger than the echo signal photons. Super-correlated light offers an exceptionally strong noise tolerance for single-photon-level imaging in extreme environments with intense noise, paving the way for the future development of extremely sensitive light detection.

physics.optics↗

arXiv2024

DualDn: Dual-domain Denoising via Differentiable ISP

Image denoising is a critical component in a camera's Image Signal Processing (ISP) pipeline. There are two typical ways to inject a denoiser into the ISP pipeline: applying a denoiser directly to captured raw frames (raw domain) or to the ISP's output sRGB images (sRGB domain). However, both approaches have their limitations. Residual noise from raw-domain denoising can be amplified by the subsequent ISP processing, and the sRGB domain struggles to handle spatially varying noise since it only sees noise distorted by the ISP. Consequently, most raw or sRGB domain denoising works only for specific noise distributions and ISP configurations. To address these challenges, we propose DualDn, a novel learning-based dual-domain denoising. Unlike previous single-domain denoising, DualDn consists of two denoising networks: one in the raw domain and one in the sRGB domain. The raw domain denoising adapts to sensor-specific noise as well as spatially varying noise levels, while the sRGB domain denoising adapts to ISP variations and removes residual noise amplified by the ISP. Both denoising networks are connected with a differentiable ISP, which is trained end-to-end and discarded during the inference stage. With this design, DualDn achieves greater generalizability compared to most learning-based denoising methods, as it can adapt to different unseen noises, ISP parameters, and even novel ISP pipelines. Experiments show that DualDn achieves state-of-the-art performance and can adapt to different denoising architectures. Moreover, DualDn can be used as a plug-and-play denoising module with real cameras without retraining, and still demonstrate better performance than commercial on-camera denoising. The project website is available at: https://openimaginglab.github.io/DualDn/

eess.IV↗

arXiv2019

Fast Color-guided Depth Denoising for RGB-D Images by Graph Filtering

Depth images captured by off-the-shelf RGB-D cameras suffer from much stronger noise than color images. In this paper, we propose a method to denoise the depth images in RGB-D images by color-guided graph filtering. Our iterative method contains two components: color-guided similarity graph construction, and graph filtering on the depth signal. Implemented in graph vertex domain, filtering is accelerated as computation only occurs among neighboring vertices. Experimental results show that our method outperforms state-of-art depth image denoising methods significantly both on quality and efficiency.

eess.IV↗