arXiv subjects

Russell Bent

Publications and source records attributed to Russell Bent.

At least 73 records · Page 4Linked to original sources

arXiv2018

Relaxations of AC Maximal Load Delivery for Severe Contingency Analysis

This work considers the task of finding an AC-feasible operating point of a severely damaged transmission network while ensuring that a maximal amount of active power loads can be delivered. This AC Maximal Load Delivery (AC-MLD) task is a nonconvex nonlinear optimization problem that is incredibly challenging to solve on large-scale transmission system datasets. This work demonstrates that convex relaxations of the AC-MLD problem provide a reliable and scalable method for finding high-quality bounds on the amount of active power that can be delivered in the AC-MLD problem. To demonstrate their effectiveness, the solution methods proposed in this work are rigorously evaluated on 1000 N-k scenarios on seven power networks ranging in size from 70 to 6000 buses. The most effective relaxation of the AC-MLD problem converges in less than 20 seconds on commodity computing hardware for all 7000 of the scenarios considered.

math.OC↗

arXiv2018

Convex Hull Formulations for Mixed-Integer Multilinear Functions

In this paper, we present convex hull formulations for a mixed-integer, multilinear term/function (MIMF) that features products of multiple continuous and binary variables. We develop two equivalent convex relaxations of an MIMF and study their polyhedral properties in their corresponding higher-dimensional spaces. We numerically observe that the proposed formulations consistently perform better than state-of-the-art relaxation approaches.

math.OC↗

arXiv2018

Probabilistic $N$-$k$ Failure-Identification for Power Systems

This paper considers a probabilistic generalization of the $N$-$k$ failure-identification problem in power transmission networks, where the probability of failure of each component in the network is known a priori and the goal of the problem is to find a set of $k$ components that maximizes disruption to the system loads weighted by the probability of simultaneous failure of the $k$ components. The resulting problem is formulated as a bilevel mixed-integer nonlinear program. Convex relaxations, linear approximations, and heuristics are developed to obtain feasible solutions that are close to the optimum. A general cutting-plane algorithm is proposed to solve the convex relaxation and linear approximations of the $N$-$k$ problem. Extensive numerical results corroborate the effectiveness of the proposed algorithms on small-, medium-, and large-scale test instances, the test instances include the IEEE 14-bus system, the IEEE single-area and three-area RTS96 systems, the IEEE 118-bus system, the WECC 240-bus test system, the 1354-bus PEGASE system, and the 2383-bus Polish winter-peak test system.

eess.SY↗

arXiv2018

Algorithms for Optimal Topology Design, Placement, Sizing and Operation of Distributed Energy Resources in Resilient Off-grid Microgrids

Power distribution in remote communities often depends on off-grid microgrids. In order to address the reliability challenges for these microgrids, we develop a mathematical model for topology design, capacity planning, and operation of distributed energy resources in microgrids that includes N-1 security analysis. Due to the prohibitive size of the optimization problem, we develop a rolling-horizon algorithm that is combined with scenario-based decomposition to efficiently solve the model. We demonstrate the efficiency of our algorithm on an adapted IEEE test network and a real network from an Alaskan microgrid. We also compare our model's required solution time with commercial solvers and recently developed decomposition algorithms to solve similar problems.

math.OC↗

arXiv2018

Hierarchical Predictive Control Algorithms for Optimal Design and Operation of Microgrids

In recent years, microgrids, i.e., disconnected distribution systems, have received increasing interest from power system utilities to support the economic and resiliency posture of their systems. The economics of long distance transmission lines prevent many remote communities from connecting to bulk transmission systems and these communities rely on off-grid microgrid technology. Furthermore, communities that are connected to the bulk transmission system are investigating microgrid technologies that will support their ability to disconnect and operate independently during extreme events. In each of these cases, it is important to develop methodologies that support the capability to design and operate microgrids in the absence of transmission over long periods of time. Unfortunately, such planning problems tend to be computationally difficult to solve and those that are straightforward to solve often lack the modeling fidelity that inspires confidence in the results. To address these issues, we first develop a high fidelity model for design and operations of a microgrid that include component efficiencies, component operating limits, battery modeling, unit commitment, capacity expansion, and power flow physics; the resulting model is a mixed-integer quadratically-constrained quadratic program (MIQCQP). We then develop an iterative algorithm, referred to as the Model Predictive Control (MPC) algorithm, that allows us to solve the resulting MIQCQP. We show, through extensive computational experiments, that the MPC-based method can scale to problems that have a very long planning horizon and provide high quality solutions that lie within 5\% of optimal.

math.OC↗

arXiv2018

PowerModels.jl: An Open-Source Framework for Exploring Power Flow Formulations

In recent years, the power system research community has seen an explosion of novel methods for formulating and solving power network optimization problems. These emerging methods range from new power flow approximations, which go beyond the traditional DC power flow by capturing reactive power, to convex relaxations, which provide solution quality and runtime performance guarantees. Unfortunately, the sophistication of these emerging methods often presents a significant barrier to evaluating them on a wide variety of power system optimization applications. To address this issue, this work proposes PowerModels, an open-source platform for comparing power flow formulations. From its inception, PowerModels was designed to streamline the process of evaluating different power flow formulations on shared optimization problem specifications. This work provides a brief introduction to the design of PowerModels, validates its implementation, and demonstrates its effectiveness with a proof-of-concept study analyzing five different formulations of the Optimal Power Flow problem.

math.OC↗

arXiv2018

Tight Piecewise Convex Relaxations for Global Optimization of Optimal Power Flow

Since the alternating current optimal power flow (ACOPF) problem was introduced in 1962, developing efficient solution algorithms for the problem has been an active field of research. In recent years, there has been increasing interest in convex relaxations-based solution approaches that are often tight in practice. Based on these approaches, we develop tight piecewise convex relaxations with convex-hull representations, an adaptive, multivariate partitioning algorithm with bound tightening that progressively improves these relaxations and, given sufficient time, converges to the globally optimal solution. We illustrate the strengths of our algorithm using benchmark ACOPF test cases from the literature. Computational results show that our novel algorithm reduces the best-known optimality gaps for some hard ACOPF cases.

math.OC↗

arXiv2018

Communication-Constrained Expansion Planning for Resilient Distribution Systems

Distributed generation and remotely controlled switches have emerged as important technologies to improve the resiliency of distribution grids against extreme weather-related disturbances. Therefore it becomes impor- tant to study how best to place them on the grid in order to meet a resiliency criteria, while minimizing costs and capturing their dependencies on the associated communication systems that sustains their distributed operations. This paper introduces the Optimal Resilient Design Problem for Distribution and Communi- cation Systems (ORDPDC) to address this need. The ORDPDC is formulated as a two-stage stochastic mixed-integer program that captures the physical laws of distribution systems, the communication connec- tivity of the smart grid components, and a set of scenarios which specifies which components are affected by potential disasters. The paper proposes an exact branch-and-price algorithm for the ORDPDC which features a strong lower bound and a variety of acceleration schemes to address degeneracy. The ORDPDC model and branch-and-price algorithm were evaluated on a variety of test cases with varying disaster inten- sities and network topologies. The results demonstrate the significant impact of the network topologies on the expansion plans and costs, as well as the computational benefits of the proposed approach.

math.OC↗

arXiv2017

Optimal Transmission Line Switching under Geomagnetic Disturbances

In recent years, there have been increasing concerns about how geomagnetic disturbances (GMDs) impact electrical power systems. Geomagnetically-induced currents (GICs) can saturate transformers, induce hot spot heating and increase reactive power losses. These effects can potentially cause catastrophic damage to transformers and severely impact the ability of a power system to deliver power. To address this problem, we develop a model of GIC impacts to power systems that includes 1) GIC thermal capacity of transformers as a function of normal Alternating Current (AC) and 2) reactive power losses as a function of GIC. We use this model to derive an optimization problem that protects power systems from GIC impacts through line switching, generator redispatch, and load shedding. We employ state-of-the-art convex relaxations of AC power flow equations to lower bound the objective. We demonstrate the approach on a modified RTS96 system and the UIUC 150-bus system and show that line switching is an effective means to mitigate GIC impacts. We also provide a sensitivity analysis of optimal switching decisions with respect to GMD direction.

eess.SY↗

arXiv2017

Tools for improving resilience of electric distribution systems with networked microgrids

In the electrical grid, the distribution system is themost vulnerable to severe weather events. Well-placed and coordinatedupgrades, such as the combination of microgrids, systemhardening and additional line redundancy, can greatly reduce thenumber of electrical outages during extreme events. Indeed, ithas been suggested that resilience is one of the primary benefitsof networked microgrids. We formulate a resilient distributiongrid design problem as a two-stage stochastic program andmake use of decomposition-based heuristic algorithms to scaleto problems of practical size. We demonstrate the feasibilityof a resilient distribution design tool on a model of an actualdistribution network. We vary the study parameters, i.e., thecapital cost of microgrid generation relative to system hardeningand target system resilience metrics, and find regions in thisparametric space corresponding to different distribution systemarchitectures, such as individual microgrids, hardened networks,and a transition region that suggests the benefits of microgridsnetworked via hardened circuit segments.

cs.CE↗

arXiv2017

Polyhedral approximation in mixed-integer convex optimization

Generalizing both mixed-integer linear optimization and convex optimization, mixed-integer convex optimization possesses broad modeling power but has seen relatively few advances in general-purpose solvers in recent years. In this paper, we intend to provide a broadly accessible introduction to our recent work in developing algorithms and software for this problem class. Our approach is based on constructing polyhedral outer approximations of the convex constraints, resulting in a global solution by solving a finite number of mixed-integer linear and continuous convex subproblems. The key advance we present is to strengthen the polyhedral approximations by constructing them in a higher-dimensional space. In order to automate this extended formulation we rely on the algebraic modeling technique of disciplined convex programming (DCP), and for generality and ease of implementation we use conic representations of the convex constraints. Although our framework requires a manual translation of existing models into DCP form, after performing this transformation on the MINLPLIB2 benchmark library we were able to solve a number of unsolved instances and on many other instances achieve superior performance compared with state-of-the-art solvers like Bonmin, SCIP, and Artelys Knitro.

math.OC↗

arXiv2017

Resilient Transmission Grid Design: AC Relaxation vs. DC approximation

As illustrated in recent years (Superstorm Sandy, the Northeast Ice Storm of 1998, etc.), extreme weather events pose an enormous threat to the electric power transmission systems and the associated socio-economic systems that depend on reliable delivery of electric power. Besides inevitable malfunction of power grid components, deliberate malicious attacks can cause high risks to the service. These threats motivate the need for approaches and methods that improve the resilience of power systems. In this paper, we develop a model and tractable methods for optimizing the upgrade of transmission systems through a combination of hardening existing components, adding redundant lines, switches, generators, and FACTS and phase-shifting devices. While many of these controllable components are included in traditional design (expansion planning) problems, we uniquely assess their benefits from a resiliency point of view. More importantly, perhaps, we evaluate the suitability of using state-of-the-art AC power flow relaxations versus the common DC approximation in resilience improvement studies. The resiliency model and algorithms are tested on a modified version of the RTS-96 (single area) system.

math.OC↗

arXiv2016

Tightening McCormick Relaxations for Nonlinear Programs via Dynamic Multivariate Partitioning

In this work, we propose a two-stage approach to strengthen piecewise McCormick relaxations for mixed-integer nonlinear programs (MINLP) with multi-linear terms. In the first stage, we exploit Constraint Programing (CP) techniques to contract the variable bounds. In the second stage we partition the variables domains using a dynamic multivariate partitioning scheme. Instead of equally partitioning the domains of variables appearing in multi-linear terms, we construct sparser partitions yet tighter relax- ations by iteratively partitioning the variable domains in regions of interest. This approach decouples the number of partitions from the size of the variable domains, leads to a significant reduction in computation time, and limits the number of binary variables that are introduced by the partitioning. We demonstrate the performance of our algorithm on well-known benchmark problems from MINLPLIB and discuss the computational benefits of CP-based bound tightening procedures.

eess.SY↗

arXiv2016

Extended Formulations in Mixed-integer Convex Programming

We present a unifying framework for generating extended formulations for the polyhedral outer approximations used in algorithms for mixed-integer convex programming (MICP). Extended formulations lead to fewer iterations of outer approximation algorithms and generally faster solution times. First, we observe that all MICP instances from the MINLPLIB2 benchmark library are conic representable with standard symmetric and nonsymmetric cones. Conic reformulations are shown to be effective extended formulations themselves because they encode separability structure. For mixed-integer conic-representable problems, we provide the first outer approximation algorithm with finite-time convergence guarantees, opening a path for the use of conic solvers for continuous relaxations. We then connect the popular modeling framework of disciplined convex programming (DCP) to the existence of extended formulations independent of conic representability. We present evidence that our approach can yield significant gains in practice, with the solution of a number of open instances from the MINLPLIB2 benchmark library.

math.OC↗

arXiv2016

Unit Commitment with N-1 Security and Wind Uncertainty

As renewable wind energy penetration rates continue to increase, one of the major challenges facing grid operators is the question of how to control transmission grids in a reliable and a cost-efficient manner. The stochastic nature of wind forces an alteration of traditional methods for solving day-ahead and look-ahead unit commitment and dispatch. In particular, uncontrollable wind generation increases the risk of random component failures. To address these questions, we present an N-1 Security and Chance-Constrained Unit Commitment (SCCUC) that includes the modeling of generation reserves that respond to wind fluctuations and tertiary reserves to account for single component outages. The basic formulation is reformulated as a mixed-integer second-order cone problem to limit the probability of failure. We develop three different algorithms to solve the problem to optimality and present a detailed case study on the IEEE RTS-96 single area system. The case study assesses the economic impacts due to contingencies and various degrees of wind power penetration into the system and also corroborates the effectiveness of the algorithms.

eess.SY↗

arXiv2015

Efficient Dynamic Compressor Optimization in Natural Gas Transmission Systems

The growing reliance of electric power systems on gas-fired generation to balance intermittent sources of renewable energy has increased the variation and volume of flows through natural gas transmission pipelines. Adapting pipeline operations to maintain efficiency and security under these new conditions requires optimization methods that account for transients and that can quickly compute solutions in reaction to generator re-dispatch. This paper presents an efficient scheme to minimize compression costs under dynamic conditions where deliveries to customers are described by time-dependent mass flow. The optimization scheme relies on a compact representation of gas flow physics, a trapezoidal discretization in time and space, and a two-stage approach to minimize energy costs and maximize smoothness. The resulting large-scale nonlinear programs are solved using a modern interior-point method. The proposed optimization scheme is validated against an integration of dynamic equations with adaptive time-stepping, as well as a recently proposed state-of-the-art optimal control method. The comparison shows that the solutions are feasible for the continuous problem and also practical from an operational standpoint. The results also indicate that our scheme provides at least an order of magnitude reduction in computation time relative to the state-of-the-art and scales to large gas transmission networks with more than 6000 kilometers of total pipeline.

math.OC↗

arXiv2015

Pressure Fluctuations in Natural Gas Networks caused by Gas-Electric Coupling

The development of hydraulic fracturing technology has dramatically increased the supply and lowered the cost of natural gas in the United States, driving an expansion of natural gas-fired generation capacity in several electrical inter-connections. Gas-fired generators have the capability to ramp quickly and are often utilized by grid operators to balance intermittency caused by wind generation. The time-varying output of these generators results in time-varying natural gas consumption rates that impact the pressure and line-pack of the gas network. As gas system operators assume nearly constant gas consumption when estimating pipeline transfer capacity and for planning operations, such fluctuations are a source of risk to their system. Here, we develop a new method to assess this risk. We consider a model of gas networks with consumption modeled through two components: forecasted consumption and small spatio-temporarily varying consumption due to the gas-fired generators being used to balance wind. While the forecasted consumption is globally balanced over longer time scales, the fluctuating consumption causes pressure fluctuations in the gas system to grow diffusively in time with a diffusion rate sensitive to the steady but spatially-inhomogeneous forecasted distribution of mass flow. To motivate our approach, we analyze the effect of fluctuating gas consumption on a model of the Transco gas pipeline that extends from the Gulf of Mexico to the Northeast of the United States.

eess.SY↗

arXiv2015

Maximizing electrical power supply using FACTS devices

Modern society critically depends on the services electric power provides. Power systems rely on a network of power lines and transformers to deliver power from sources of power (generators) to the consumers (loads). However, when power lines fail (for example, through lightning or natural disasters) or when the system is heavily used, the network is often unable to fulfill all of the demand for power. While systems are vulnerable to these failures, increasingly, sophisticated control devices are being deployed to improve the efficiency of power systems. Such devices can also be used to improve the resiliency of power systems to failures. In this paper, we focus on using FACTS devices in this context. A FACTS device allows power grid operators to adjust the impedance parameters of power lines, thereby redistributing flow in the network and potentially increasing the amount of power that is supplied. Here we develop new approaches for determining the optimal parameter settings for FACTS devices in order to supply the maximal amount of power when networks are stressed, e.g. power line failures and heavy utilization.

eess.SY↗