Searcharxiv⌕ Search

arXiv subjects

Ryan O. Behunin

Publications and source records attributed to Ryan O. Behunin.

28 records · Page 2Linked to original sources

422 Million Q Planar Integrated All-Waveguide Resonator with a 3.4 Billion Absorption Limited Q and Sub-MHz Linewidth

High Q optical resonators are a key component for ultra-narrow linewidth lasers, frequency stabilization, precision spectroscopy and quantum applications. Integration of these resonators in a photonic waveguide wafer-scale platform is key to reducing their cost, size and power as well as sensitivity to environmental disturbances. However, to date, the intrinsic Q of integrated all-waveguide resonators has been relegated to below 150 Million. Here, we report an all-waveguide Si3N4 resonator with an intrinsic Q of 422 Million and a 3.4 Billion absorption loss limited Q. The resonator has a 453 kHz intrinsic linewidth and 906 kHz loaded linewidth, with a finesse of 3005. The corresponding linear loss of 0.060 dB/m is the lowest reported to date for an all-waveguide design with deposited upper cladding oxide. These are the highest intrinsic and absorption loss limited Q factors and lowest linewidth reported to date for a photonic integrated all-waveguide resonator. This level of performance is achieved through a careful reduction of scattering and absorption loss components. We quantify, simulate and measure the various loss contributions including scattering and absorption including surface-state dangling bonds that we believe are responsible in part for absorption. In addition to the ultra-high Q and narrow linewidth, the resonator has a large optical mode area and volume, both critical for ultra-low laser linewidths and ultra-stable, ultra-low frequency noise reference cavities. These results demonstrate the performance of bulk optic and etched resonators can be realized in a photonic integrated solution, paving the way towards photonic integration compatible Billion Q cavities for precision scientific systems and applications such as nonlinear optics, atomic clocks, quantum photonics and high-capacity fiber communications systems on-chip.

physics.optics↗

Back-scatter immune injection-locked Brillouin laser in silicon

As self-sustained oscillators, lasers possess the unusual ability to spontaneously synchronize. These nonlinear dynamics are the basis for a simple yet powerful stabilization technique known as injection locking, in which a laser's frequency and phase can be controlled by an injected signal. Due to its inherent simplicity and favorable noise characteristics, injection locking has become a workhorse for coherent amplification and high-fidelity signal synthesis in applications ranging from precision atomic spectroscopy to distributed sensing. Within integrated photonics, however, these injection locking dynamics remain relatively untapped--despite significant potential for technological and scientific impact. Here, we demonstrate injection locking in a silicon photonic Brillouin laser for the first time. Injection locking of this monolithic device is remarkably robust, allowing us to tune the laser emission by a significant fraction of the Brillouin gain bandwidth. Harnessing these dynamics, we demonstrate amplification of small signals by more than 23 dB. Moreover, we demonstrate that the injection locking dynamics of this system are inherently nonreciprocal, yielding unidirectional control and back-scatter immunity in an all-silicon system. This device physics opens the door to new strategies for phase noise reduction, low-noise amplification, and back-scatter immunity in silicon photonics.

physics.optics↗

Resonantly enhanced nonreciprocal silicon Brillouin amplifier

The ability to amplify light within silicon waveguides is central to the development of high-performance silicon photonic device technologies. To this end, the large optical nonlinearities made possible through stimulated Brillouin scattering offer a promising avenue for power-efficient all-silicon amplifiers, with recent demonstrations producing several dB of net amplification. However, scaling the degree of amplification to technologically compelling levels (>10 dB), necessary for everything from filtering to small signal detection, remains an important goal. Here, we significantly enhance the Brillouin amplification process by harnessing an inter-modal Brillouin interaction within a multi-spatial-mode silicon racetrack resonator. Using this approach, we demonstrate more than 20 dB of net Brillouin amplification in silicon, advancing state-of-the-art performance by a factor of 30. This degree of amplification is achieved with modest (~15 mW) continuous-wave pump powers and produces low out-of-band noise. Moreover, we show that this same system behaves as a unidirectional amplifier, providing more than 28 dB of optical nonreciprocity without insertion loss in an all-silicon platform. Building on these results, this device concept opens the door to new types of all-silicon injection-locked Brillouin lasers, high-performance photonic filters, and waveguide-compatible distributed optomechanical phenomena.

physics.optics↗

A silicon Brillouin laser

Brillouin laser oscillators offer powerful and flexible dynamics as the basis for mode-locked lasers, microwave oscillators, and optical gyroscopes in a variety of optical systems. However, Brillouin interactions are exceedingly weak in conventional silicon photonic waveguides, stifling progress towards silicon-based Brillouin lasers. The recent advent of hybrid photonic-phononic waveguides has revealed Brillouin interactions to be one of the strongest and most tailorable nonlinearities in silicon. Here, we harness these engineered nonlinearities to demonstrate Brillouin lasing in silicon. Moreover, we show that this silicon-based Brillouin laser enters an intriguing regime of dynamics, in which optical self-oscillation produces phonon linewidth narrowing. Our results provide a platform to develop a range of applications for monolithic integration within silicon photonic circuits.

physics.optics↗

Optomechanical cooling in a continuous system

Radiation-pressure-induced optomechanical coupling permits exquisite control of micro- and mesoscopic mechanical oscillators. This ability to manipulate and even damp mechanical motion with light---a process known as dynamical backaction cooling---has become the basis for a range of novel phenomena within the burgeoning field of cavity optomechanics, spanning from dissipation engineering to quantum state preparation. As this field moves toward more complex systems and dynamics, there has been growing interest in the prospect of cooling traveling-wave phonons in continuous optomechanical waveguides. Here, we demonstrate optomechanical cooling in a continuous system for the first time. By leveraging the dispersive symmetry breaking produced by inter-modal Brillouin scattering, we achieve continuous mode optomechanical cooling in an extended 2.3-cm silicon waveguide, reducing the temperature of a band of traveling-wave phonons by more than 30 K from room temperature. This work reveals that optomechanical cooling is possible in macroscopic linear waveguide systems without an optical cavity or discrete acoustic modes. Moreover, through an intriguing type of wavevector-resolved phonon spectroscopy, we show that this system permits optomechanical control over continuously accessible groups of phonons and produces a new form of nonreciprocal reservoir engineering. Beyond this study, this work represents a first step towards a range of novel classical and quantum traveling-wave operations in continuous optomechanical systems.

physics.optics↗

Guided-wave Brillouin scattering in air

Here we identify a new form of optomechanical coupling in gas-filled hollow-core fibers. Stimulated forward Brillouin scattering is observed in air in the core of a photonic bandgap fiber. A single resonance is observed at 35 MHz, which corresponds to the first excited axial-radial acoustic mode in the air-filled core. The linewidth and coupling strengths are determined by the acoustic loss and electrostrictive coupling in air, respectively. A simple analytical model, refined by numerical simulations, is developed that accurately predicts the Brillouin coupling strength and frequency from the gas and fiber parameters. Since this form of Brillouin coupling depends strongly on both the acoustic and dispersive optical properties of the gas within the fiber, this new type of optomechanical interaction is highly tailorable. These results allow for forward Brillouin spectroscopy in dilute gases, could be useful for sensing and will present a power and noise limitation for certain applications.

physics.optics↗

Dynamical local and non-local Casimir atomic phases

We develop an open-system dynamical theory of the Casimir interaction between coherent atomic waves and a material surface. The system --- the external atomic waves --- disturbs the environment --- the electromagnetic field and the atomic dipole degrees of freedom --- in a non- local manner by leaving footprints on distinct paths of the atom interferometer. This induces a non-local dynamical phase depending simultaneously on two distinct paths, beyond usual atom-optics methods, and comparable to the local dynamical phase corrections. Non-local and local atomic phase coherences are thus equally important to capture the interplay between the external atomic motion and the Casimir interaction. Such dynamical phases are obtained for finite-width wavepackets by developing a diagrammatic expansion of the disturbed environment quantum state.

quant-ph↗

Non-local double-path Casimir phase in atom interferometers

We present a quantum open system theory of atom interferometers evolving in the quantized electromagnetic field bounded by an ideal conductor. Our treatment reveals an unprecedented feature of matter-wave propagation, namely the appearance of a non-local double-path phase coherence. Such a non-local phase arises from the coarse-graining over the quantized electromagnetic field and internal atomic degrees of freedom, yielding a non-Hamiltonian evolution of the atomic waves moving in presence of correlated quantum dipole and field fluctuations. We develop a diagrammatic interpretation of this phase, and estimate it for realistic experimental parameters.

cond-mat.quant-gas↗

Boundary Effects on Quantum Entanglement and its Dynamics in a Detector-Field System

In this paper we analyze an exactly solvable model consisting of an inertial Unruh-DeWitt detector which interacts linearly with a massless quantum field in Minkowski spacetime with a perfectly reflecting flat plane boundary. Firstly a set of coupled equations for the detector's and the field's Heisenberg operators are derived. Then we introduce the linear entropy as a measure of entanglement between the detector and the quantum field under mirror reflection, and solve the early-time detector-field entanglement dynamics. After coarse-graining the field, the dynamics of the detector's internal degree of freedom is described by a quantum Langevin equation, where the dissipation and noise kernels respectively correspond to the retarded Green's functions and Hadamard elementary functions of the free quantum field in a half space. At late times when the combined system is in a stationary state, we obtain exact expressions for the detector's covariance matrix and show that the detector-field entanglement decreases for smaller separation between the detector and the mirror. We explain the behavior of detector-field entanglement qualitatively with the help of a detector's mirror image, compare them with the case of two real detectors and explain the differences.

quant-ph↗

Theory of optomechanics: Oscillator-field model of moving mirrors

In this paper we present a model for the kinematics and dynamics of optomechanics which describe the coupling between an optical field, here modeled by a massless scalar field, and the internal (e.g., determining its reflectivity) and mechanical (e.g., displacement) degrees of freedom of a moveable mirror. As opposed to implementing boundary conditions on the field we highlight the internal dynamics of the mirror which provides added flexibility to describe a variety of setups relevant to current experiments. The inclusion of the internal degrees of freedom in this model allows for a variety of optical activities of mirrors from those exhibiting broadband reflective properties to the cases where reflection is suppressed except for a narrow band centered around the characteristic frequency associated with the mirror's internal dynamics. After establishing the model and the reflective properties of the mirror we show how appropriate parameter choices lead to useful optomechanical models such as the well known Barton-Calogeracos model [G. Barton and A. Calogeracos, Ann. Phys. 238, 227 (1995)] and the important yet lesser explored nonlinear models (e.g., $Nx$ coupling) for small photon numbers $N$, which present models based on side-band approximations [H. Kimble et al., Phys. Rev. D 65, 022002 (2001)] cannot cope with. As a simple illustrative application we consider classical radiation pressure cooling with this model. To expound its theoretical structure and physical meanings we connect our model to field-theoretical models using auxiliary fields and the ubiquitous Brownian motion model of quantum open systems. Finally we describe the range of applications of this model, from a full quantum mechanical treatment of radiation pressure cooling, quantum entanglement between macroscopic mirrors, to the backreaction of Hawking radiation on black hole evaporation in a moving mirror analog.

quant-ph↗