Searcharxiv⌕ Search

arXiv subjects

S. Davini

Publications and source records attributed to S. Davini.

At least 19 recordsLinked to original sources

Euclid Data Release 1 (DR1): Calibration strategy and observations

This paper reviews how Euclid's top-level calibration requirements were translated into a calibration plan, how this plan is implemented and maintained during the survey, and how it performs in the current DR1 release. We show that DR1 already meets or exceeds most end-of-mission spectrophotometric calibration requirements. The construction of spectroscopically complete and pure samples relies on ongoing data acquisition for the Euclid Deep Survey, while point-spread-function modelling and shear calibration are still converging to their stringent accuracy requirements. With all DR1 data reprocessed with the DR1 pipeline configuration, more subtle effects have been detected and characterised, and correction strategies have been developed for DR2. These include improved absolute flux calibration, astrometry, charge-persistence correction, shutter effects, wavelength calibration, and spectrophotometric corrections for water-ice contamination. Finally, synthetic photometric transformations between Euclid and each of Roman, the James Webb Space Telescope, and the Chinese Space-station Survey Telescope, are presented.

astro-ph.IM↗

Cryogenic characterisation of the FBK NUV-HD-cryo Silicon Photomultipliers for the DarkSide-20k dark matter experiment

Liquid Argon Time Projection Chambers (TPCs) are highly promising detectors for dark matter searches due to their uniform response, scalability to large target masses, and compatibility with ultra-low background conditions. The DarkSide-20k (DS-20k) experiment, currently under construction at Istituto Nazionale di Fisica Nucleare (INFN) Laboratori Nazionali del Gran Sasso (LNGS), aims to achieve unprecedented sensitivity to Weakly Interacting Massive Particles (WIMPs), approaching the neutrino fog. At the heart of the detector is a dual-phase TPC filled and surrounded by low-radioactivity argon from underground sources (i.e. Underground Argon (UAr)), functioning both as the WIMP target and detection medium. The experiment employs Fondazione Bruno Kessler (FBK) NUV-HD-cryo Silicon Photomultipliers (SiPMs) as the chosen photon sensors for its optical planes. Key SiPM properties such as dark noise rate, gain and direct crosstalk were measured using specialized test setups at 77 K. The photon detection efficiency (PDE) was measured under vacuum at 77 K over the wavelength range 350-820 nm. Secondary photon emission, which can give rise to external optical crosstalk, was measured under vacuum at 86 K over the wavelength range 550-1020 nm.

physics.ins-det↗

Characterization of spurious-electron signals in the double-phase argon TPC of the DarkSide-50 experiment

Spurious-electron signals in dual-phase noble liquid time projection chambers have been observed in both xenon and argon Time Projection Chambers (TPCs). This paper presents the first comprehensive study of spurious electrons in argon, using data collected by the DarkSide-50 experiment at the INFN Laboratori Nazionali del Gran Sasso (LNGS). Understanding these events is a key factor in improving the sensitivity of low mass dark matter searches exploiting ionization signals in dual-phase noble liquid TPCs. We find that a significant fraction of spurious electron events, ranging from 30 to 70% across the experiment's lifetime, are caused by electrons captured from impurities and later released with delay time constants on the orders of 5 ms and 50 ms. The rate of spurious electron events is found to correlate with the operational condition of the purification system and the total event rate in the detector. Finally, we present evidence that multi-electron spurious electron events may originate from photo-ionization of the steel grid used to define the electric fields. These observations indicate the possibility of reduction of the background in future experiments and hint at possible spurious electron production mechanisms.

hep-ex↗

Euclid preparation. XCV. Cosmology Likelihood for Observables in Euclid (CLOE). 2. Code implementation

We provide a description of the code implementation and structure of Cosmology Likelihood for Observables in Euclid (CLOE), developed by members of the Euclid Consortium. CLOE is a modular Python code for computing the theoretical predictions of cosmological observables and evaluating them against state-of-the-art data from galaxy surveys such as Euclid in a unified likelihood. This primarily includes the core observables of weak gravitational lensing, photometric galaxy clustering, galaxy-galaxy lensing, and spectroscopic galaxy clustering, but also extended probes such as the clusters of galaxies and cross-correlations of galaxy positions and shapes with the cosmic microwave background. While CLOE has been developed to serve as the unified framework for the parameter inferences in Euclid, it has general capabilities that can serve the broader cosmological community. It is different from other comparable cosmological tools in that it is written entirely in Python, performs the full likelihood calculation, and includes both photometric and spectroscopic observables. We focus on the primary probes of Euclid and describe the overall code structure, rigorous code development practices, extensive documentation, unique features, speed optimization, and future development plans. CLOE is publicly available at https://github.com/cloe-org/cloe.

astro-ph.CO↗

Euclid preparation XCVII. Cosmology Likelihood for Observables in Euclid (CLOE). 4: Validation and performance

The Euclid satellite will provide data on the clustering of galaxies and on the distortion of their measured shapes, which can be used to constrain and test the cosmological model. However, the increase in precision places strong requirements on the accuracy of the theoretical modelling for the observables and of the full analysis pipeline. In this paper, we investigate the accuracy of the calculations performed by the Cosmology Likelihood for Observables in Euclid (CLOE), a software able to handle both the modelling of observables and their fit against observational data for both the photometric and spectroscopic surveys of Euclid, by comparing the output of CLOE with external codes used as benchmark. We perform such a comparison on the quantities entering the calculations of the observables, as well as on the final outputs of these calculations. Our results highlight the high accuracy of CLOE when comparing its calculation against external codes for Euclid observables on an extended range of operative cases. In particular, all the summary statistics of interest always differ less than $0.1\,σ$ from the chosen benchmark, and CLOE predictions are statistically compatible with simulated data obtained from benchmark codes. The same holds for the comparison of correlation function in configuration space for spectroscopic and photometric observables.

astro-ph.CO↗

Search for two-neutrino double electron capture in $^{36}$Ar with the DarkSide-50 detector

Two-neutrino double electron capture is a rare nuclear decay where two electrons are simultaneously captured from the atomic shells and two neutrinos are emitted. We report on the first search for two-neutrino double electron capture in the $\textit{KK}$- and $\textit{KL}$-shells of $^{36}$Ar using the low-radioactivity liquid argon target from underground sources in the DarkSide-50 experiment. No statistically significant excess was observed with approximately 12 ton-day exposure of underground argon (UAr) and, taking into account the $^{36}$Ar isotopic abundance in UAr (0.007%), we set a limit on the half-life of the two-electron capture process in $^{36}$Ar of $T_{1/2} > 9.2 \times 10^{19}$ yr at 90% C.L. The sensitivity of the DarkSide-20k experiment, which will become operational in the next few years, was also evaluated and is expected to increase by a factor $\sim$100 with 10 years of expected operation and assuming the same $^{36}$Ar abundance as in the DarkSide-50 underground argon target.

nucl-ex↗

First Nuclear Ultra-Heavy Dark Matter Search in Argon Time Projection Chambers with the DarkSide-50 Experiment

We report the first search for nuclear ultra-heavy dark matter (UHDM) in a dual-phase liquid argon time projection chamber using the DarkSide-50 experiment. Unlike conventional weakly interacting massive particles (WIMPs), nuclear UHDM candidates may be composed of many dark nucleons and scatter numerous times while passing through the detector. Accounting for energy loss through the Earth's overburden, we apply selection criteria optimized for multi-scatter event topologies using the 532-day low-radiation campaign of the DarkSide-50 detector. Excluded limits on the UHDM-nucleon scattering cross section for dark nucleon masses of $m_χ= 10, 50, 100, 500 \, \mathrm{GeV/c^2}$ are presented.

hep-ex↗

Sensitivity to low-mass WIMPs with an improved liquid argon ionization response model within the DarkSide programme

Dark matter detection experiments using liquid argon rely on a precise characterization of the ionization response to nuclear recoils, especially in the keV energy range relevant for light dark matter interactions. In this work, we present a comprehensive analysis that combines new measurements from the ReD setup, part of the DarkSide experimental program, with calibration data from DarkSide-50, as well as results from the ARIS and SCENE experiments. These combined datasets enable improved constraints on atomic screening effects in the modeling of the ionization response of liquid argon to nuclear recoils. The analysis is performed within the Thomas-Imel recombination framework adopted in previous DarkSide studies, and is here further constrained by the inclusion of ReD data, which allow the screening function to be determined from calibration measurements. By including the updated ionization model into the DarkSide-50 analysis framework, we obtain stronger exclusion limits on low-mass WIMP interactions, setting new world-leading constraints in the 1-3 GeV/c^2 WIMP mass range. Finally, we recast the sensitivity projections for the upcoming DarkSide-20k detector, demonstrating a significantly enhanced discovery potential for low-mass dark matter candidates.

hep-ex↗

Euclid preparation. XCVI. Cosmology Likelihood for Observables in Euclid (CLOE). 3. Inference and Forecasts

The Euclid mission aims to measure the positions, shapes, and redshifts of over a billion galaxies to provide unprecedented constraints on the nature of dark matter and dark energy. Achieving this goal requires a continuous reassessment of the mission's scientific performance, particularly in terms of its ability to constrain cosmological parameters, as our understanding of how to model large-scale structure observables improves. In this study, we present the first scientific forecasts using CLOE (Cosmology Likelihood for Observables in Euclid), a dedicated Euclid cosmological pipeline developed to support this endeavour. Using advanced Bayesian inference techniques applied to synthetic Euclid-like data, we sample the posterior distribution of cosmological and nuisance parameters across a variety of cosmological models and Euclid primary probes: cosmic shear, angular photometric galaxy clustering, galaxy-galaxy lensing, and spectroscopic galaxy clustering. We validate the capability of CLOE to produce reliable cosmological forecasts, showcasing Euclid's potential to achieve a figure of merit for the dark energy parameters $w_0$ and $w_a$ exceeding 400 when combining all primary probes. Furthermore, we illustrate the behaviour of the posterior probability distribution of the parameters of interest given different priors and scale cuts. Finally, we emphasise the importance of addressing computational challenges, proposing further exploration of innovative data science techniques to efficiently navigate the Euclid high-dimensional parameter space in upcoming cosmological data releases.

astro-ph.CO↗

Characterization of argon recoils at the keV scale with ReD and ReD+

The ReD experiment measured the ionization yield Qy of argon for nuclear recoils in the 2-10 keV range using a dual-phase Time Projection Chamber irradiated with neutrons from a Cf-252 fission source. The measurement extends coverage below 7 keV, confirms consistency with previous data above 7 keV, and indicates a higher Qy at lower energies. These results are relevant for argon-based experiments searching for dark matter in the form of low-mass Weakly Interacting Massive Particles, which are very sensitive to the modeling of the detector response in this energy range.

hep-ex↗

Fermionic sub-GeV Dark Matter from evaporating Primordial Black Holes at DarkSide-50

We present a search for boosted dark matter from Primordial Black Holes (PBH) evaporation using the DarkSide-50 ionization-signal-only dataset corresponding to the experiment's ($12202\pm180$) ${\rm kg\: d}$ exposure. We focus on evaporation of PBHs with masses in the range [$10^{14},\,10^{16}$] g producing Dirac fermionic dark matter particles with sub-GeV kinetic energy. These relativistic particles, with energies up to hundreds of MeV, can generate detectable signals for masses below $\mathcal{O}(100)$ MeV. The absence of a signal enables setting complementary limits to those derived from cosmological observations and direct detection searches for cosmic ray-boosted dark matter.

hep-ph↗

Characterization of the ionization response of argon to nuclear recoils at the keV scale with the ReD experiment

In the recent years, argon-based experiments looking for Dark Matter in the Universe have explored the non-standard scenario in which Dark Matter is made by low-mass Weakly Interacting Massive Particles, of mass in the range of 1-10 GeV instead of the canonical hundreds of GeV. Detecting such particles is challenging, as their expected signatures are nuclear recoils with energies below 10 keV, observable solely via ionization. This necessitates a precise understanding of the detector response in this energy regime, which remains incomplete for argon. To address this, the ReD experiment was developed within the framework of the DarkSide-20k Collaboration to produce and characterize few-keV nuclear recoils. A compact dual-phase argon Time Projection Chamber (TPC) was irradiated with neutrons from a Cf252 source, to produce Ar recoils in the energy range of interest via (n,n') elastic scattering. A downstream spectrometer composed of 18 plastic scintillators detected the neutrons scattered off Ar nuclei, enabling recoil energy reconstruction via two-body kinematics. The ionization yield Qy of argon, defined as the number of electrons produced per unit energy deposit, was measured in a model-independent way between 2 and 10 keV. These measurements extend direct experimental coverage well below the previous limit of approximately 7 keV. The results are consistent with existing data above 7 keV, while they indicate a higher Qy at lower energies.

nucl-ex↗

Euclid preparation. Cosmology Likelihood for Observables in Euclid (CLOE). 6: Impact of systematic uncertainties on the cosmological analysis

Extracting cosmological information from the Euclid galaxy survey will require modelling numerous systematic effects during the inference process. This implies varying a large number of nuisance parameters, which have to be marginalised over before reporting the constraints on the cosmological parameters. This is a delicate process, especially with such a large parameter space, which could result in biased cosmological results. In this work, we study the impact of different choices for modelling systematic effects and prior distribution of nuisance parameters for the final Euclid Data Release, focusing on the 3$\times$2pt analysis for photometric probes and the galaxy power spectrum multipoles for the spectroscopic probes. We explore the effect of intrinsic alignments, linear galaxy bias, magnification bias, multiplicative cosmic shear bias and shifts in the redshift distribution for the photometric probes, as well as the purity of the spectroscopic sample. We find that intrinsic alignment modelling has the most severe impact with a bias up to $6\,σ$ on the Hubble constant $H_0$ if neglected, followed by mis-modelling of the redshift evolution of galaxy bias, yielding up to $1.5\,σ$ on the parameter $S_8\equivσ_8\sqrt{Ω_{\rm m} /0.3}$. Choosing a too optimistic prior for multiplicative bias can also result in biases of the order of $0.7\,σ$ on $S_8$. We also find that the precision on the estimate of the purity of the spectroscopic sample will be an important driver for the constraining power of the galaxy clustering full-shape analysis. These results will help prioritise efforts to improve the modelling and calibration of systematic effects in Euclid.

astro-ph.CO↗

Cosmology Likelihood for Observables in \Euclid (CLOE). 1. Theoretical recipe

As the statistical precision of cosmological measurements increases, the accuracy of the theoretical description of these measurements needs to increase correspondingly in order to infer the underlying cosmology that governs the Universe. To this end, we have created the Cosmology Likelihood for Observables in Euclid (CLOE), which is a novel cosmological parameter inference pipeline developed within the Euclid Consortium to translate measurements and covariances into cosmological parameter constraints. In this first in a series of six papers, we describe the theoretical recipe of this code for the Euclid primary probes. These probes are composed of the photometric 3x2pt observables of cosmic shear, galaxy-galaxy lensing, and galaxy clustering, along with spectroscopic galaxy clustering. We provide this description in both Fourier and configuration space for standard and extended summary statistics, including the wide range of systematic uncertainties that affect them. This includes systematic uncertainties such as intrinsic galaxy alignments, baryonic feedback, photometric and spectroscopic redshift uncertainties, shear calibration uncertainties, sample impurities, photometric and spectroscopic galaxy biases, as well as magnification bias. The theoretical descriptions are further able to accommodate both Gaussian and non-Gaussian likelihoods and extended cosmologies with non-zero curvature, massive neutrinos, evolving dark energy, and simple forms of modified gravity. These theoretical descriptions that underpin CLOE will form a crucial component in revealing the true nature of the Universe with next-generation cosmological surveys such as Euclid.

astro-ph.CO↗

Production, Quality Assurance and Quality Control of the SiPM Tiles for the DarkSide-20k Time Projection Chamber

The DarkSide-20k dark matter direct detection experiment will employ a 21 m^2 silicon photomultiplier (SiPM) array, instrumenting a dual-phase 50 tonnes liquid argon Time Projection Chamber (TPC). SiPMs are arranged into modular photosensors called Tiles, each integrating 24 SiPMs onto a printed circuit board (PCB) that provides signal amplification, power distribution, and a single-ended output for simplified readout. 16 Tiles are further grouped into Photo-Detector Units (PDUs). This paper details the production of the Tiles and the quality assurance and quality control (QA-QC) protocol established to ensure their performance and uniformity. The production and QA-QC of the Tiles are carried out at Nuova Officina Assergi (NOA), an ISO-6 clean room facility at LNGS. This process includes wafer-level cryogenic characterisation, precision flip-chip bonding, wire bonding, and extensive electrical and optical validation of each Tile. The overall production yield exceeds 83.5%, matching the requirements of the DarkSide-20k production plan. These results validate the robustness of the Tile design and its suitability for operation in a cryogenic environment.

physics.ins-det↗

Flow and thermal modelling of the argon volume in the DarkSide-20k TPC

The DarkSide-20k dark matter experiment, currently under construction at LNGS, features a dual-phase time projection chamber (TPC) with a ~50 t argon target from an underground well. At this scale, it is crucial to optimise the argon flow pattern for efficient target purification and for fast distribution of internal gaseous calibration sources with lifetimes of the order of hours. To this end, we have performed computational fluid dynamics simulations and heat transfer calculations. The residence time distribution shows that the detector is well-mixed on time-scales of the turnover time (~40 d). Notably, simulations show that despite a two-order-of-magnitude difference between the turnover time and the half-life of $^{83\text{m}}$Kr of 1.83 h, source atoms have the highest probability to reach the centre of the TPC 13 min after their injection, allowing for a homogeneous distribution before undergoing radioactive decay. We further analyse the thermal aspects of dual-phase operation and define the requirements for the formation of a stable gas pocket on top of the liquid. We find a best-estimate value for the heat transfer rate at the liquid-gas interface of 62 W with an upper limit of 144 W and a minimum gas pocket inlet temperature of 89 K to avoid condensation on the acrylic anode. This study also informs the placement of liquid inlets and outlets in the TPC. The presented techniques are widely applicable to other large-scale, noble-liquid detectors.

physics.ins-det↗

Performance of the image persistence model for Euclid infrared detectors

Large-format infrared detectors are at the heart of major ground and space-based astronomical instruments, and the HgCdTe HxRG is the most widely used. The Near Infrared Spectrometer and Photometer (NISP) of the ESA's Euclid mission launched in July 2023 hosts 16 H2RG detectors in the focal plane. Their performance relies heavily on the effect of image persistence, which results in residual images that can remain in the detector for a long time contaminating any subsequent observations. Deriving a precise model of image persistence is challenging due to the sensitivity of this effect to observation history going back hours or even days. Nevertheless, persistence removal is a critical part of image processing because it limits the accuracy of the derived cosmological parameters. We will present the empirical model of image persistence derived from ground characterization data, adapted to the Euclid observation sequence and compared with the data obtained during the in-orbit calibrations of the satellite.

astro-ph.IM↗

Quality Assurance and Quality Control of the $26~\text{m}^2$ SiPM production for the DarkSide-20k dark matter experiment

DarkSide-20k is a novel liquid argon dark matter detector currently under construction at the Laboratori Nazionali del Gran Sasso (LNGS) of the Istituto Nazionale di Fisica Nucleare (INFN) that will push the sensitivity for Weakly Interacting Massive Particle (WIMP) detection into the neutrino fog. The core of the apparatus is a dual-phase Time Projection Chamber (TPC), filled with \SI{50} {tonnes} of low radioactivity underground argon (UAr) acting as the WIMP target. NUV-HD-cryo Silicon Photomultipliers (SiPM)s designed by Fondazione Bruno Kessler (FBK) (Trento, Italy) were selected as the photon sensors covering two $10.5~\text{m}^2$ Optical Planes, one at each end of the TPC, and a total of $5~\text{m}^2$ photosensitive surface for the liquid argon veto detectors. This paper describes the Quality Assurance and Quality Control (QA/QC) plan and procedures accompanying the production of FBK~NUV-HD-cryo SiPM wafers manufactured by LFoundry s.r.l. (Avezzano, AQ, Italy). SiPM characteristics are measured at 77~K at the wafer level with a custom-designed probe station. As of March~2025, 1314 of the 1400 production wafers (94% of the total) for DarkSide-20k were tested. The wafer yield is $93.2\pm2.5$\%, which exceeds the 80\% specification defined in the original DarkSide-20k production plan.

physics.ins-det↗