arXiv subjects

S. Fineschi

Publications and source records attributed to S. Fineschi.

At least 19 recordsLinked to original sources

arXiv2026

Coordinated Coronagraphic Observations from Proba-3 and Aditya-L1: Investigating CME Energetics in the Inner Corona

Constraining the plasma properties and energetics of coronal mass ejections (CMEs) in the inner corona is essential for understanding their early evolution, yet remains challenging because of limited observations. We investigate the mass and density evolution, and energy partitioning of two CMEs observed on 2025 September 14 and 16, and assess the potential of coordinated Proba-3/ASPIICS and Aditya-L1/VELC observations to constrain CME energetics in the low corona. We present the first coordinated observations of CMEs obtained simultaneously by Proba-3/ASPIICS and Aditya-L1/VELC. Using ASPIICS white-light observations, we estimate the CME mass, volume, number density, and the evolution of kinetic, thermal, and magnetic energies. Magnetic energies are estimated from observed CME properties using observationally constrained, physically motivated assumptions. Simultaneous VELC Fe XIV 5303 Angstorm observations provide independent estimates of the emission measure, electron number density, thermal energy, and CME lateral extent. The two events exhibit markedly different energy partitioning in the low corona. For the 14 September CME, the kinetic and magnetic energies are comparable, while the thermal energy remains nearly two orders of magnitude smaller, indicating limited plasma heating. In contrast, the 16 September CME exhibits a substantial thermal-energy enhancement, with thermal energy eventually becoming comparable to kinetic energy. For both CMEs, the estimated magnetic energy remains comparable to or exceeds the kinetic energy over the observed height. Our results demonstrate the scientific potential of synergetic ASPIICS and VELC observations for constraining CME mass, density, and energetics in the inner corona, providing new observational constraints on the early evolution of CMEs.

astro-ph.SR↗

arXiv2026

Diffraction in the ASPIICS coronagraph: observations and modeling

Context: ASPIICS is a giant-baseline visible light solar coronagraph, which relies on the millimetric positioning performance of the precision formation flying Proba-3 mission of the European Space Agency. Proba-3 was launched on 5 Dec 2024, and since then ASPIICS observes the solar corona with the field of view (1.1-3) R_sun. Aims: Diffraction, in particular diffraction of solar disk light on the external occulter, is known to provide a major source of straylight in coronagraphs. We aim to analyze diffracted light visible in ASPIICS images, compare it with the analytical-numerical diffraction model reported earlier, and fine-tune the model. Methods: We compare diffraction effects visible in ASPIICS data with simulated diffraction images; in particular, we compare the geometrical properties and the radiometric signal. The properties of the diffraction described in previous works suggest how to fine-tune the model in order to achieve a better correspondence with the observations. Results: Early ASPIICS observations, where diffraction is pronounced, fully confirm all the qualitative properties of diffracted light suggested by the model. After fine-tuning of the model we see quantitative correspondence of the level of 30\% -- 50\%, depending on the configuration. Conclusions: The performed analysis allows (a) to validate our analytical-numerical model and justify the assumptions, and (b) to estimate the contribution of the diffracted light in the ASPIICS images. In the majority of the field of view the diffracted light is two orders of magnitude below the coronal signal.

astro-ph.IM↗

arXiv2025

Observing the solar corona from a formation-flying mission. First results of Proba-3/ASPIICS

We report the first results from observations of the solar corona by the ASPIICS coronagraph aboard the Proba-3 mission. ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun) is a giant coronagraph consisting of the telescope mounted aboard one of the mission's spacecraft and the external occulter placed on the second spacecraft. The two spacecraft separated by around 144 m fly in a precise formation up to 5.5 hours at a time, which allows coronal observations in eclipse-like conditions, i.e. close to the limb (typically down to 1.099 Rs, occasionally down to 1.05 Rs) and with very low straylight. ASPIICS observes quasi-stationary structures, such as coronal loops, streamers, quiescent prominences, and a variety of dynamic phenomena: erupting prominences, coronal mass ejections, jets, slow solar wind outflows, coronal inflows. In particular, weak, widespread and persistent small-scale outflows and inflows between 1.3 and 3 Rs are observed at a high spatial (5.6 arcsec) and temporal (30 s) resolution for the first time, expanding the range of scales at which the variable slow solar wind is observed to form.

astro-ph.SR↗

arXiv2025

The ASPIICS solar coronagraph aboard the Proba-3 formation flying mission. Scientific objectives and instrument design

We describe the scientific objectives and instrument design of the ASPIICS coronagraph launched aboard the Proba-3 mission of the European Space Agency (ESA) on 5 December 2024. Proba-3 consists of two spacecraft in a highly elliptical orbit around the Earth. One spacecraft carries the telescope, and the external occulter is mounted on the second spacecraft. The two spacecraft fly in a precise formation during 6 hours out of 19.63 hour orbit, together forming a giant solar coronagraph called ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun). Very long distance between the external occulter and the telescope (around 144 m) represents an increase of two orders of magnitude compared to classical externally occulted solar coronagraphs. This allows us to observe the inner corona in eclipse-like conditions, i.e. close to the solar limb (down to 1.099 Rs) and with very low straylight. ASPIICS will provide a new perspective on the inner solar corona that will help solve several outstanding problems in solar physics, such as the origin of the slow solar wind and physical mechanism of coronal mass ejections.

astro-ph.SR↗

arXiv2025

First detection of acoustic-like flux in the middle solar corona

Waves are thought to play a significant role in the heating of the solar atmosphere and the acceleration of the wind. Among the many types of waves observed in the Sun, the so-called p-modes with a 3 mHz frequency peak dominate the lower atmosphere. In the presence of magnetic fields, these waves can be converted into magnetohydrodynamic modes, which then leak into the corona through magnetic conduits. High-resolution off-limb observations have indeed revealed signatures of ubiquitous and global 3 mHz oscillations in the corona, although limited to low heights and to incompressible modes. We present high-cadence, high-resolution observations of the corona in the range 1.7 - 3.6 solar radii taken in broad-band 580-640 nm visible light by the Metis coronagraph aboard Solar Orbiter. These observations were designed to investigate density fluctuations in the middle corona. The data were acquired over several days in March 2022, October 2022, and for two days in April 2023. We selected representative regions of the corona on three sample dates. Analysis of the data in those regions revealed the presence of periodic density fluctuations. By examining several time-distance diagrams, we determined the main properties (apparent propagation speed, amplitude) of those fluctuations. We also show power spectra in selected locations in order to determine the dominant frequencies. We found wave-like, compressible fluctuations of low amplitude - of the order of 0.1 % of the background - in several large-scale regions in the corona at least up to 2.5 solar radii. We also found that the apparent propagation speeds of these perturbations typically fall in the range 150 - 450 km/s. A power spectrum analysis of time series revealed an excess power in the range 2-7 mHz, often with peaks at 3 or 5 mHz, i.e. in a range consistent with p-mode frequencies of the lower solar atmosphere.

astro-ph.SR↗

arXiv2025

Metis Observations of Alfv\'{e}nic Outflows Driven by Interchange Reconnection in a Pseudostreamer

This study presents observations of a large pseudostreamer solar eruption and, in particular, the post-eruption relaxation phase, as captured by Metis onboard the Solar Orbiter on October 12, 2022, during its perihelion passage. Utilizing total brightness data, we observe the outward propagation of helical features up to 3 solar radii along a radial column that appears to correspond to the stalk of the pseudostreamer. The helical structures persisted for more than 3 hours following a jet-like coronal mass ejection associated with a polar crown prominence eruption. A notable trend is revealed: the inclination of these features decreases as their polar angle and height increase. Additionally, we measured their helix pitch. Despite a 2-minute time cadence limiting direct correspondence among filamentary structures in consecutive frames, we find that the Metis helical structure may be interpreted as a consequence of twist (nonlinear torsional Alfv\'{e}n waves) and plasma liberated by interchange reconnection. A comparison was performed of the helix parameters as outlined by fine-scale outflow features with those obtained from synthetic white-light images derived from the high-resolution magnetohydrodynamics simulation of interchange reconnection in a pseudostreamer topology by Wyper et al. (2022). A remarkable similarity between the simulation-derived images and the observations was found. We conjecture that these Metis observations may represent the upper end in spatial and energy scale of the interchange reconnection process that has been proposed recently as the origin of the Alfv\'{e}nic solar wind.

astro-ph.SR↗

arXiv2023

Eruptive events with exceptionally bright emission in HI Ly-alpha observed by the Metis coronagraph

Metis, the coronagraph on board Solar Orbiter, provides for the first time coronagraphic imaging in the ultraviolet HI Ly-alpha line and, simultaneously, in polarized visible light, thus providing a host of information on the properties of CMEs and solar eruptions like their overall dynamics, time evolution, mass content, and outflow propagation velocity in the expanding corona. We analyzed in this work six CMEs observed by Metis between April and October 2021, which are characterized by a very strong HI Ly-alpha emission. We studied in particular the morphology, kinematics, and the temporal and radial evolution of the emission of such events, focusing on the brightest UV features. The kinematics of the eruptive events under consideration were studied by determining the height-time profiles of the brightest parts on the Metis plane of the sky. Furthermore, the 3D position in the heliosphere of the CMEs were determined by employing co-temporal images from two other coronagraphs: LASCO/C2 onboard SOHO, and COR2 onboard STEREO-A. Finally, the radiometrically calibrated Metis images of the bright UV features were analyzed to provide estimates of their volume and density. From the kinematics and radiometric analyses, we obtained indications of the temperatures of the bright UV cores of these events. The analysis of these strong UV-emitting features associated with coronal mass ejections demonstrates the capabilities of the current constellation of space coronagraphs, Metis, LASCO/C2, and COR2, in providing a complete characterization of the structure and dynamics of eruptive events in their propagation phase from their inception up to several solar radii. Furthermore, we show how the unique capabilities of the Metis instrument to observe these events in both HI Ly-alpha line and polarized VL radiation allow plasma diagnostics on the thermal state of these events.

astro-ph.SR↗

arXiv2023

Slow wind belt in the quiet solar corona

The slow solar wind belt in the quiet corona, observed with the Metis coronagraph on board Solar Orbiter on May 15, 2020, during the activity minimum of the cycle 24, in a field of view extending from 3.8 $R_\odot$ to 7.0 $R_\odot$, is formed by a slow and dense wind stream running along the coronal current sheet, accelerating in the radial direction and reaching at 6.8 $R_\odot$ a speed within 150 km s$^{-1}$ and 190 km s$^{-1}$, depending on the assumptions on the velocity distribution of the neutral hydrogen atoms in the coronal plasma. The slow stream is separated by thin regions of high velocity shear from faster streams, almost symmetric relative to the current sheet, with peak velocity within 175 km s$^{-1}$ and 230 km s$^{-1}$ at the same coronal level. The density-velocity structure of the slow wind zone is discussed in terms of the expansion factor of the open magnetic field lines that is known to be related to the speed of the quasi-steady solar wind, and in relation to the presence of a web of quasi separatrix layers, S-web, the potential sites of reconnection that release coronal plasma into the wind. The parameters characterizing the coronal magnetic field lines are derived from 3D MHD model calculations. The S-web is found to coincide with the latitudinal region where the slow wind is observed in the outer corona and is surrounded by thin layers of open field lines expanding in a non-monotonic way.

astro-ph.SR↗

arXiv2023

In-flight validation of Metis Visible-light Polarimeter Coronagraph on board Solar Orbiter

Context. The Metis coronagraph is one of the remote-sensing instruments of the ESA/NASA Solar Orbiter mission. Metis is aimed at the study of the solar atmosphere and solar wind by simultaneously acquiring images of the solar corona at two different wavelengths; visible-light (VL) within a band ranging from 580 nm to 640 nm, and in the HI Ly-alpha 121.6 +/- 10 nm ultraviolet (UV) light. The visible-light channel includes a polarimeter with electro-optically modulating Liquid Crystal Variable Retarders (LCVRs) to measure the linearly polarized brightness of the K-corona to derive the electron density. Aims. In this paper, we present the first in-flight validation results of the Metis polarimetric channel together with a comparison to the on-ground calibrations. It is the validation of the first use in deep space (with hard radiation environment) of an electro-optical device: a liquid crystal-based polarimeter. Methods. We used the orientation of the K-corona's linear polarization vector during the spacecraft roll maneuvers for the in-flight calibration. Results. The first in-flight validation of the Metis coronagraph on-board Solar Orbiter shows a good agreement with the on-ground measurements. It confirms the expected visible-light channel polarimetric performance. A final comparison between the first pB obtained by Metis with the polarized brightness (pB) obtained by the space-based coronagraph LASCO and the ground-based coronagraph KCor shows the consistency of the Metis calibrated results.

astro-ph.SR↗

arXiv2022

A Coronal Mass Ejection followed by a prominence eruption and a plasma blob as observed by Solar Orbiter

On February 12, 2021 two subsequent eruptions occurred above the West limb, as seen along the Sun-Earth line. The first event was a typical slow Coronal Mass Ejection (CME), followed $\sim 7$ hours later by a smaller and collimated prominence eruption, originating Southward with respect to the CME, followed by a plasma blob. These events were observed not only by SOHO and STEREO-A missions, but also by the suite of remote sensing instruments on-board Solar Orbiter (SolO). This work shows how data acquired by the Full Sun Imager (FSI), Metis coronagraph, and Heliospheric Imager (SoloHI) from the SolO perspective can be combined to study the eruptions and the different source regions. Moreover, we show how Metis data can be analyzed to provide new information about solar eruptions. Different 3D reconstruction methods were applied to the data acquired by different spacecraft including remote sensing instruments on-board SolO. Images acquired by both Metis channels in the Visible Light (VL) and H I Lyman$-\alpha$ line (UV) were combined to derive physical information on the expanding plasma. The polarization ratio technique was also applied for the first time to the Metis images acquired in the VL channel. The two eruptions were followed in 3D from their source region to their expansion in the intermediate corona. Thanks to the combination of VL and UV Metis data, the formation of a post-CME Current Sheet (CS) was followed for the first time in the intermediate corona. The plasma temperature gradient across a post-CME blob propagating along the CS was also measured for the first time. Application of the polarization ratio technique to Metis data shows that, thanks to the combination of four different polarization measurements, the errors are reduced by $\sim 5-7$\%, thus better constraining the 3D distribution of plasma.

astro-ph.SR↗

arXiv2021

First light observations of the solar wind in the outer corona with the Metis coronagraph

The investigation of the wind in the solar corona initiated with the observations of the resonantly scattered UV emission of the coronal plasma obtained with UVCS-SOHO, designed to measure the wind outflow speed by applying the Doppler dimming diagnostics. Metis on Solar Orbiter complements the UVCS spectroscopic observations, performed during solar activity cycle 23, by simultaneously imaging the polarized visible light and the HI Ly-alpha corona in order to obtain high-spatial and temporal resolution maps of the outward velocity of the continuously expanding solar atmosphere. The Metis observations, on May 15, 2020, provide the first HI Ly-alpha images of the extended corona and the first instantaneous map of the speed of the coronal plasma outflows during the minimum of solar activity and allow us to identify the layer where the slow wind flow is observed. The polarized visible light (580-640 nm), and the UV HI Ly-alpha (121.6 nm) coronal emissions, obtained with the two Metis channels, are combined in order to measure the dimming of the UV emission relative to a static corona. This effect is caused by the outward motion of the coronal plasma along the direction of incidence of the chromospheric photons on the coronal neutral hydrogen. The plasma outflow velocity is then derived as a function of the measured Doppler dimming. The static corona UV emission is simulated on the basis of the plasma electron density inferred from the polarized visible light. This study leads to the identification, in the velocity maps of the solar corona, of the high-density layer about +/-10 deg wide, centered on the extension of a quiet equatorial streamer present at the East limb where the slowest wind flows at about (160 +/- 18) km/s from 4 Rs to 6 Rs. Beyond the boundaries of the high-density layer, the wind velocity rapidly increases, marking the transition between slow and fast wind in the corona.

astro-ph.SR↗

arXiv2021

Cosmic-ray flux predictions and observations for and with Metis on board Solar Orbiter

The Metis coronagraph is one of the remote sensing instruments hosted on board the ESA/NASA Solar Orbiter mission. Metis is devoted to carry out the first simultaneous imaging of the solar corona in both visible light (VL) and ultraviolet (UV). High-energy particles penetrate spacecraft materials and may limit the performance of on-board instruments. A study of galactic cosmic-ray (GCR) tracks observed in the first VL images gathered by Metis during the commissioning phase for a total of 60 seconds of exposure time is presented here. A similar analysis is planned for the UV channel. A prediction of the GCR flux up to hundreds of GeV is made here for the first part of the Solar Orbiter mission to study the Metis coronagraph performance. GCR model predictions are compared to observations gathered on board Solar Orbiter by the EPD/HET experiment in the range 10 MeV-100 MeV in the summer 2020 and with previous measurements. Estimated cosmic-ray fluxes above 70 MeV n$^{-1}$ have been also parameterized and used for Monte Carlo simulations aiming at reproducing the cosmic-ray track observations in the Metis coronagraph VL images. The same parameterizations can also be used to study the performance of other detectors. By comparing observations of cosmic-ray tracks in the Metis VL images with FLUKA Monte Carlo simulations of cosmic-ray interactions in the VL detector, it is found that cosmic rays fire a fraction of the order of 10$^{-4}$ of the whole image pixel sample. Therefore, cosmic rays do not affect sensibly the quality of Metis VL images. It is also found that the overall efficiency for cosmic-ray identification in the Metis VL images is approximately equal to the contribution of Z$>$2 particles. As a result, the Metis coronagraph may play the role of a proton monitor for long-term GCR variations during the overall mission duration.

astro-ph.IM↗

arXiv2021

SWELTO -- Space WEather Laboratory in Turin Observatory

SWELTO -- Space WEather Laboratory in Turin Observatory is a conceptual framework where new ideas for the analysis of space-based and ground-based data are developed and tested. The input data are (but not limited to) remote sensing observations (EUV images of the solar disk, Visible Light coronagraphic images, radio dynamic spectra, etc...), in situ plasma measurements (interplanetary plasma density, velocity, magnetic field, etc...), as well as measurements acquired by local sensors and detectors (radio antenna, fluxgate magnetometer, full-sky cameras, located in OATo). The output products are automatic identification, tracking, and monitoring of solar stationary and dynamic features near the Sun (coronal holes, active regions, coronal mass ejections, etc...), and in the interplanetary medium (shocks, plasmoids, corotating interaction regions, etc...), as well as reconstructions of the interplanetary medium where solar disturbances may propagate from the Sun to the Earth and beyond. These are based both on empirical models and numerical MHD simulations. The aim of SWELTO is not only to test new data analysis methods for future application for Space Weather monitoring and prediction purposes, but also to procure, test and deploy new ground-based instrumentation to monitor the ionospheric and geomagnetic responses to solar activity. Moreover, people involved in SWELTO are active in outreach to disseminate the topics related with Space Weather to students and the general public.

astro-ph.SR↗

arXiv2020

The Solar Orbiter Science Activity Plan: translating solar and heliospheric physics questions into action

Solar Orbiter is the first space mission observing the solar plasma both in situ and remotely, from a close distance, in and out of the ecliptic. The ultimate goal is to understand how the Sun produces and controls the heliosphere, filling the Solar System and driving the planetary environments. With six remote-sensing and four in-situ instrument suites, the coordination and planning of the operations are essential to address the following four top-level science questions: (1) What drives the solar wind and where does the coronal magnetic field originate? (2) How do solar transients drive heliospheric variability? (3) How do solar eruptions produce energetic particle radiation that fills the heliosphere? (4) How does the solar dynamo work and drive connections between the Sun and the heliosphere? Maximising the mission's science return requires considering the characteristics of each orbit, including the relative position of the spacecraft to Earth (affecting downlink rates), trajectory events (such as gravitational assist manoeuvres), and the phase of the solar activity cycle. Furthermore, since each orbit's science telemetry will be downloaded over the course of the following orbit, science operations must be planned at mission level, rather than at the level of individual orbits. It is important to explore the way in which those science questions are translated into an actual plan of observations that fits into the mission, thus ensuring that no opportunities are missed. First, the overarching goals are broken down into specific, answerable questions along with the required observations and the so-called Science Activity Plan (SAP) is developed to achieve this. The SAP groups objectives that require similar observations into Solar Orbiter Observing Plans (SOOPs), resulting in a strategic, top-level view of the optimal opportunities for science observations during the mission lifetime.

astro-ph.SR↗

arXiv2019

Comparing extrapolations of the coronal magnetic field structure at 2.5 solar radii with multi-viewpoint coronagraphic observations

The magnetic field shapes the structure of the solar corona but we still know little about the interrelationships between the coronal magnetic field configurations and the resulting quasi-stationary structures observed in coronagraphic images (as streamers, plumes, coronal holes). One way to obtain information on the large-scale structure of the coronal magnetic field is to extrapolate it from photospheric data and compare the results with coronagraphic images. Our aim is to verify if this comparison can be a fast method to check systematically the reliability of the many methods available to reconstruct the coronal magnetic field. Coronal fields are usually extrapolated from photospheric measurements typically in a region close to the central meridian on the solar disk and then compared with coronagraphic images at the limbs, acquired at least 7 days before or after to account for solar rotation, implicitly assuming that no significant changes occurred in the corona during that period. In this work, we combine images from three coronagraphs (SOHO/LASCO-C2 and the two STEREO/SECCHI-COR1) observing the Sun from different viewing angles to build Carrington maps covering the entire corona to reduce the effect of temporal evolution to ~ 5 days. We then compare the position of the observed streamers in these Carrington maps with that of the neutral lines obtained from four different magnetic field extrapolations, to evaluate the performances of the latter in the solar corona. Our results show that the location of coronal streamers can provide important indications to discriminate between different magnetic field extrapolations.

astro-ph.SR↗

arXiv2018

Visibility of Prominences using the HeI D3 Line Filter on PROBA-3/ASPIICS Coronagraph

We determine an optimal width and shape of the narrow-band filter centered around the He\,{\sc i} D$_{3}$ line for prominence and coronal mass ejection (CME) observations with the ASPIICS ({\it Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun}) coronagraph onboard the PROBA-3 ({\it Project for On-board Autonomy}) satellite, to be launched in 2020. We analyze He\,{\sc i} D$_{3}$ line intensities for three representative non-LTE prominence models at temperatures 8, 30 and 100~kK computed by the radiative transfer code and the prominence visible-light (VL) emission due to Thomson scattering on the prominence electrons. We compute various useful relations at prominence line-of-sight (LOS) velocities of 0, 100, and 300~km~s$^{-1}$ for 20~Å~wide flat filter and three Gaussian filters with full width at half maximum (FWHM) equal to 5, 10, and 20~Å~to show the relative brightness contribution of the He\,{\sc i} D$_{3}$ line and the prominence VL to the visibility in a given narrow-band filter. We also discuss possible signal contamination by Na\,{\sc i} D$_{1}$ and D$_{2}$ lines which otherwise may be useful to detect comets. Results mainly show: i) an optimal narrow-band filter should be flat or somewhere between flat and Gaussian with FWHM of 20~Å~in order to detect fast moving prominence structures, ii) the maximum emission in the He\,{\sc i} D$_3$ line is at 30~kK and the minimal at 100~kK, and iii) the ratio of emission in the He\,{\sc i} D$_3$ line to the VL emission can provide a useful diagnostic for the temperature of prominence structures. This ratio is up to 10 for hot prominence structures, up to 100 for cool structures and up to 1000 for warm structures.

astro-ph.SR↗

arXiv2016

Diagnostics of Coronal Magnetic Fields Through the Hanle Effect in UV and IR Lines

The plasma thermodynamics in the solar upper atmosphere, particularly in the corona, are dominated by the magnetic field, which controls the flow and dissipation of energy. The relative lack of knowledge of the coronal vector magnetic field is a major handicap for progress in coronal physics. This makes the development of measurement methods of coronal magnetic fields a high priority in solar physics. The Hanle effect in the UV and IR spectral lines is a largely unexplored diagnostic. We use magnetohydrodynamic (MHD) simulations to study the magnitude of the signal to be expected for typical coronal magnetic fields for selected spectral lines in the UV and IR wavelength ranges, namely the H I Ly-$α$ and the He I 10830 Å lines. We show that the selected lines are useful for reliable diagnosis of coronal magnetic fields. The results show that the combination of polarization measurements of spectral lines with different sensitivities to the Hanle effect may be most appropriate for deducing coronal magnetic properties from future observations.

astro-ph.SR↗

arXiv2011

Solar magnetism eXplorer (SolmeX)

The magnetic field plays a pivotal role in many fields of Astrophysics. This is especially true for the physics of the solar atmosphere. Measuring the magnetic field in the upper solar atmosphere is crucial to understand the nature of the underlying physical processes that drive the violent dynamics of the solar corona -- that can also affect life on Earth. SolmeX, a fully equipped solar space observatory for remote-sensing observations, will provide the first comprehensive measurements of the strength and direction of the magnetic field in the upper solar atmosphere. The mission consists of two spacecraft, one carrying the instruments, and another one in formation flight at a distance of about 200m carrying the occulter to provide an artificial total solar eclipse. This will ensure high-quality coronagraphic observations above the solar limb. Solmex integrates two spectro-polarimetric coronagraphs for off-limb observations, one in the EUV and one in the IR, and three instruments for observations on the disk. The latter comprises one imaging polarimeter in the EUV for coronal studies, a spectro-polarimeter in the EUV to investigate the low corona, and an imaging spectro-polarimeter in the UV for chromospheric studies. SOHO and other existing missions have investigated the emission of the upper atmosphere in detail (not considering polarization), and as this will be the case also for missions planned for the near future. Therefore it is timely that SolmeX provides the final piece of the observational quest by measuring the magnetic field in the upper atmosphere through polarimetric observations.

astro-ph.SR↗