SearcharxivSearch

arXiv · 2604.21559

Diffraction in the ASPIICS coronagraph: observations and modeling

Abstract

Context: ASPIICS is a giant-baseline visible light solar coronagraph, which relies on the millimetric positioning performance of the precision formation flying Proba-3 mission of the European Space Agency. Proba-3 was launched on 5 Dec 2024, and since then ASPIICS observes the solar corona with the field of view (1.1-3) R_sun. Aims: Diffraction, in particular diffraction of solar disk light on the external occulter, is known to provide a major source of straylight in coronagraphs. We aim to analyze diffracted light visible in ASPIICS images, compare it with the analytical-numerical diffraction model reported earlier, and fine-tune the model. Methods: We compare diffraction effects visible in ASPIICS data with simulated diffraction images; in particular, we compare the geometrical properties and the radiometric signal. The properties of the diffraction described in previous works suggest how to fine-tune the model in order to achieve a better correspondence with the observations. Results: Early ASPIICS observations, where diffraction is pronounced, fully confirm all the qualitative properties of diffracted light suggested by the model. After fine-tuning of the model we see quantitative correspondence of the level of 30\% -- 50\%, depending on the configuration. Conclusions: The performed analysis allows (a) to validate our analytical-numerical model and justify the assumptions, and (b) to estimate the contribution of the diffracted light in the ASPIICS images. In the majority of the field of view the diffracted light is two orders of magnitude below the coronal signal.

Explore related subjects

Keep this discovery

BibTeXRIS

S. Shestov, A. N. Zhukov, R. Rougeot, C. Aime, B. Bourgoignie, L. Dolla, N. Britavskiy, S. Fineschi, S. Gunar, P. Lamy, M. Mierla, H. Peter, P. Rudawy, K. Tsinganos. 2026-04-23. Diffraction in the ASPIICS coronagraph: observations and modeling. https://arxiv.org/abs/2604.21559

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM