arXiv subjects

S. Riemann

Publications and source records attributed to S. Riemann.

At least 19 recordsLinked to original sources

arXiv2023

Computer package DIZET v. 6.45

The new version of the DIZET electroweak library is described. Changes and additional code features concerning the previous version are explained. The software allows one to make state-of-the-art theoretical predictions for pseudo-observable quantities, including higher-order radiative corrections. The current version of the DIZET library v. 6.45 incorporates advanced recent results of theoretical calculations. Numerical comparisons with the results of the previous version are performed. Estimates of theoretical uncertainties are discussed.

hep-ph↗

arXiv2022

Positron Sources for Future High Energy Physics Colliders

An unprecedented positron average current is required to fit the luminosity demands of future $e^+e^-$ high energy physics colliders. In addition, in order to access precision-frontier physics, these machines require positron polarization to enable exploring the polarization dependence in many HEP processes cross sections, reducing backgrounds and extending the reach of chiral physics studies beyond the standard model. The ILC has a mature plan for the polarized positron source based on conversion in a thin target of circularly polarized gammas generated by passing the main high energy e-beam in a long superconducting helical undulator. Compact colliders (CLIC, C3 and advanced accelerator-based concepts) adopt a simplified approach and currently do not plan to use polarized positrons in their baseline design, but could greatly benefit from the development of compact alternative solutions to polarized positron production. Increasing the positron current, the polarization purity and simplifying the engineering design are all opportunities where advances in accelerator technology have the potential to make a significant impact. This white-paper describes the current status of the field and provides R\&D short-term and long-term pathways for polarized positron sources.

physics.acc-ph↗

arXiv2021

Designing a Plasma Lens as a Matching Device for the ILC Positron Source

To realise a planned high-luminosity and high-energy $e^+e^-$-collider, as the ILC, a large amount of positrons have to be produced and the accelerated particles have to be captured and matched according to the damping ring acceptances. %There exist several technical possibilities. In this contribution a new promising alternative method for capturing positrons will be presented, the application of the plasma lens as an optical matching device. It will be compared with the current matching device proposed for the ILC, namely the quarter wave transformer. An advantage of the plasma lens is the different magnetic field component, which focuses the divergent beam in a more effective manner. Therefore it will be shown in this paper that the yield requirements could be achieved more easily. The plasma lens can actually be a promising alternative for focusing beams as soon as the technical feasibility has been approved.\\ In the simulation, a tapered active plasma lens has been optimized using the approximation of a homogeneous electric current density constant in time. The optimization process led to a plasma lens design that improves on the ILC's currently proposed optical matching device, namely the quarter wave transformer, by approximately $50-100\%$. Furthermore the design has been shown to guarantee a stable captured positron yield within $\pm1.5\%$ for single, independent parameter deviations of about $\pm10\%$.

physics.acc-ph↗

arXiv2019

Standard Model Theory for the FCC-ee Tera-Z stage

The future 100-km circular collider FCC at CERN is planned to operate in one of its modes as an electron-positron FCC-ee machine. We give an overview comparing the theoretical status to the experimental demands of one of four foreseen FCC-ee operating stages, Z-boson resonance energy physics, called the FCC-ee Tera-Z stage for short. The FCC-ee Tera-Z will deliver the highest integrated luminosities as well as very small systematic errors for a study of the Standard Model (SM) with unprecedented precision. In fact, the FCC-ee Tera-Z will allow the study of at least one more perturbative order in quantum field theory compared to the LEP/SLC precision. The real problem is that the present precision of theoretical calculations of the various SM observables does not match that of the anticipated experimental measurements. The bottle-necks to overcoming this situation are identified. In particular, the issues of precise QED unfolding and the correct calculation of SM pseudo-observables are critically reviewed. In an Executive Summary, we specify which basic theoretical calculations are needed to meet the strong experimental expectations at the FCC-ee Tera-Z. Several methods, techniques and tools needed for higher-order multi-loop calculations are presented. By inspection of the Z-boson partial and total decay width analyses, it is argued that at the beginning of operation of the FCC-ee Tera-Z, the theory predictions may be tuned to be precise enough not to limit the physics interpretation of the measurements. This statement is based on anticipated progress in analytical and numerical calculations of multi-loop and multi-scale Feynman integrals and on the completion of two-loop electroweak radiative corrections to the SM pseudo-observables this year. However, the above statement is conditional as the theoretical issues demand a very dedicated and focused investment by the community.

hep-ph↗

arXiv2016

Design of Pre-Dumping Ring Spin Rotator with a Possibility of Helicity Switching for Polarized Positrons at the ILC

The use of polarized beams enhance the possibility of the precision measurements at the International Linear Collider (ILC). In order to preserve the degree of polarization during beam transport spin rotators are included in the current TDR ILC Lattice. In this report some advantages of using a combined spin rotator/spin flipper are discussed. A few possible lattice designs of spin flipper developed at DESY in 2012 are presented.

physics.acc-ph↗

arXiv2014

Photon collimator system for the ILC Positron Source

High energy e+e- linear colliders are the next large scale project in particle physics. They need intense sources to achieve the required luminosity. In particular, the positron source must provide about 10E+14 positrons per second. The positron source for the International Linear Collider (ILC) is based on a helical undulator passed by the electron beam to create an intense circularly polarized photon beam. With these photons a longitudinally polarized positron beam is generated; the degree of polarization can be enhanced by collimating the photon beam. However, the high photon beam intensity causes huge thermal load in the collimator material. In this paper the thermal load in the photon collimator is discussed and a flexible design solution is presented.

physics.acc-ph↗

arXiv2012

Heat Load and Stress Studies for an Design of the Photon Collimator for the ILC Positron Source

The ILC baseline design for the positron source is based on radiation from a helical undulator to produce positrons in a thin target. Since the photon beam created in the helical undulator is circularly polarized, the generated positron beam is longitudinally polarized. Using a photon collimator upstream the positron target the positron polarization can be enhanced. However, the photon beam intensity yields a huge thermal load in the collimator material. In this paper the thermal load and heat dissipation in the photon collimator is discussed and design solutions are suggested.

physics.acc-ph↗

arXiv2012

Spin Tracking at the ILC Positron Source

In order to achieve the physics goals of future Linear Colliders, it is important that electron and positron beams are polarized. The baseline design at the International Linear Collider (ILC) foresees an e+ source based on helical undulator. Such a source provides high luminosity and polarizations. The positron source planned for ILC is based on a helical undulator system and can deliver a positron polarization of 60%. To ensure that no significant polarization is lost during the transport of the e- and e+ beams from the source to the interaction region, precise spin tracking has to be included in all transport elements which can contribute to a loss of polarization, i.e. the initial accelerating structures, the damping rings, the spin rotators, the main linac and the beam delivery system. In particular, the dynamics of the polarized positron beam is required to be investigated. In the talk recent results of positron spin tracking simulation at the source are presented. The positron yield and polarization are also discussed depending on the geometry of source elements.

physics.acc-ph↗

arXiv2012

Polarized positrons for the ILC - update on simulations

To achieve the extremely high luminosity for colliding electron-positron beams at the future International Linear Collider (ILC) an undulator-based source with about 230 meters helical undulator and a thin titanium-alloy target rim rotated with tangential velocity of about 100 meters per second are foreseen. The very high density of heat deposited in the target has to be analyzed carefully. The energy deposited by the photon beam in the target has been calculated in FLUKA. The resulting stress in the target material after one bunch train has been simulated in ANSYS.

physics.acc-ph↗

arXiv2009

Polarimeters and Energy Spectrometers for the ILC Beam Delivery System

Any future high energy e+e- linear collider aims at precision measurements of Standard Model quantities as well as of new, not yet discovered phenomena. In order to pursue this physics programme, excellent detectors at the interaction region have to be complemented by beam diagnostics of unprecedented precision. This article gives an overview of current plans and issues for polarimeters and energy spectrometers at the International Linear Collider, which have been designed to fulfill the precision goals at a large range of beam energies from 45.6 GeV at the Z pole up to 250 GeV or, as an upgrade, up to 500 GeV.

physics.ins-det↗

arXiv2009

From the LHC to Future Colliders

Discoveries at the LHC will soon set the physics agenda for future colliders. This report of a CERN Theory Institute includes the summaries of Working Groups that reviewed the physics goals and prospects of LHC running with 10 to 300/fb of integrated luminosity, of the proposed sLHC luminosity upgrade, of the ILC, of CLIC, of the LHeC and of a muon collider. The four Working Groups considered possible scenarios for the first 10/fb of data at the LHC in which (i) a state with properties that are compatible with a Higgs boson is discovered, (ii) no such state is discovered either because the Higgs properties are such that it is difficult to detect or because no Higgs boson exists, (iii) a missing-energy signal beyond the Standard Model is discovered as in some supersymmetric models, and (iv) some other exotic signature of new physics is discovered. In the contexts of these scenarios, the Working Groups reviewed the capabilities of the future colliders to study in more detail whatever new physics may be discovered by the LHC. Their reports provide the particle physics community with some tools for reviewing the scientific priorities for future colliders after the LHC produces its first harvest of new physics from multi-TeV collisions.

hep-ph↗

arXiv2009

Beam Polarization at the ILC: the Physics Impact and the Accelerator Solutions

In this contribution accelerator solutions for polarized beams and their impact on physics measurements are discussed. Focus are physics requirements for precision polarimetry near the interaction point and their realization with polarized sources. Based on the ILC baseline programme as described in the Reference Design Report (RDR), recent developments are discussed and evaluated taking into account physics runs at beam energies between 100 GeV and 250 GeV, as well as calibration runs on the Z-pole and options as the 1TeV upgrade and GigaZ.

physics.acc-ph↗

arXiv2008

Executive Summary of the Workshop on Polarisation and Beam Energy Measurements at the ILC

This note summarizes the results of the "Workshop on Polarisation and Beam Energy Measurements at the ILC", held at DESY (Zeuthen) April 9-11 2008. The topics for the workshop included (i) physics requirements, (ii) polarised sources and low energy polarimetry, (iii) BDS polarimeters, (iv) BDS energy spectrometers, and (v) physics-based measurements of beam polarisation and beam energy from collider data. Discussions focused on the current ILC baseline programme as described in the Reference Design Report (RDR), which includes physics runs at beam energies between 100 and 250 GeV, as well as calibration runs on the Z-pole. Electron polarisation of P_e- >~ 80% and positron polarisation of P_e+ >~ 30% are part of the baseline configuration of the machine. Energy and polarisation measurements for ILC options beyond the baseline, including Z-pole running and the 1 TeV energy upgrade, were also discussed.

physics.acc-ph↗

arXiv2008

Challenge of polarized beams at future colliders

A short overview about the potential of polarized beams at future colliders is given. In particular the baseline design for polarized beams at the ILC is presented and the physics case for polarized $e^-$ and $e^+$ is discussed. In order to fulfil the precision requirements spin tracking from the source to the interaction point is needed. Updates concerning the theoretical calculations as well as their implementation in simulation codes are reported.

hep-ph↗

arXiv2005

Z' Signals from Kaluza-Klein Dark Matter

In a minimal model of universal extra dimensions the lightest Kalzua-Klein particle is neutral and stable because of Kaluza-Klein parity conservation and it is a dark matter candidate. The corresponding level 2 mode of the lightest Kaluza-Klein particle can be detected via KK number violating decays to Standard Model particles. The expected sensitivity to second level Kaluza-Klein modes of neutral gauge bosons at the ILC is studied.

hep-ph↗

arXiv2005

ZFITTER: a semi-analytical program for fermion pair production in e+e- annihilation, from version 6.21 to version 6.42

ZFITTER is a Fortran program for the calculation of fermion pair production and radiative corrections at high energy e+e- colliders; it is also suitable for other applications where electroweak radiative corrections appear. ZFITTER is based on a semi-analytical approach to the calculation of radiative corrections in the Standard Model. We present a summary of new features of the ZFITTER program version 6.42 compared to version 6.21. The most important additions are: (i) some higher-order QED corrections to fermion pair production, (ii) electroweak one-loop corrections to atomic parity violation, (iii) electroweak one-loop corrections to nu-e nu-e-bar production, (iv) electroweak two-loop corrections to the W boson mass and the effective weak mixing angle.

hep-ph↗

arXiv2005

The role of polarized positrons and electrons in revealing fundamental interactions at the Linear Collider

The proposed International Linear Collider (ILC) is well-suited for discovering physics beyond the Standard Model and for precisely unraveling the structure of the underlying physics. The physics return can be maximized by the use of polarized beams. This report shows the paramount role of polarized beams and summarizes the benefits obtained from polarizing the positron beam, as well as the electron beam. The physics case for this option is illustrated explicitly by analyzing reference reactions in different physics scenarios. The results show that positron polarization, combined with the clean experimental environment provided by the linear collider, allows to improve strongly the potential of searches for new particles and the identification of their dynamics, which opens the road to resolve shortcomings of the Standard Model. The report also presents an overview of possible designs for polarizing both beams at the ILC, as well as for measuring their polarization.

hep-ph↗

arXiv2004

Physics Interplay of the LHC and the ILC

Physics at the Large Hadron Collider (LHC) and the International e+e- Linear Collider (ILC) will be complementary in many respects, as has been demonstrated at previous generations of hadron and lepton colliders. This report addresses the possible interplay between the LHC and ILC in testing the Standard Model and in discovering and determining the origin of new physics. Mutual benefits for the physics programme at both machines can occur both at the level of a combined interpretation of Hadron Collider and Linear Collider data and at the level of combined analyses of the data, where results obtained at one machine can directly influence the way analyses are carried out at the other machine. Topics under study comprise the physics of weak and strong electroweak symmetry breaking, supersymmetric models, new gauge theories, models with extra dimensions, and electroweak and QCD precision physics. The status of the work that has been carried out within the LHC / LC Study Group so far is summarised in this report. Possible topics for future studies are outlined.

hep-ph↗