SearcharxivSearch

arXiv subjects

Sachin Kinge

Publications and source records attributed to Sachin Kinge.

13 recordsLinked to original sources

Quantum Multiscale Modeling: A Hierarchy of Algorithms for Complex Chemical Systems

Multiscale modeling of complex chemical systems requires algorithms that operate coherently across electronic, atomistic, mesoscopic, and continuum scales. While quantum algorithms have been proposed for each regime, no systematic framework exists to compose them across scale boundaries. Here, we identify the conditions under which fault-tolerant quantum algorithms might preserve scale-specific quantum advantages. We map quantum phase estimation, Hamiltonian simulation with Gibbs state preparation, quantum random walks, and quantum partial differential equation solvers onto electronic structure, molecular dynamics, mesoscopic kinetics, and continuum reactor physics, respectively. Crucially, these correspondences do not imply unconditional end-to-end quantum advantage; speedups depend heavily on state preparation, memory architectures, matrix conditioning, and classical readout costs. Six unresolved questions define this composition problem, illustrated via a quantum hierarchy for \ce{CO} oxidation over \ce{Pt(111)}. We propose viewing inter-scale transfer as a quantum channel composition problem at the interface of algorithm design and non-equilibrium statistical mechanics, and ask whether information loss at scale boundaries is intrinsic to multiscale modeling or merely a consequence of lossy classical transduction between algorithmic layers. The resulting roadmap suggests that multiscale quantum advantage is governed primarily by the structure of information transfer between algorithmic layers, rather than by performance at individual scales alone.

quant-ph

Quantum Walks for Chemical Reaction Networks

Near a detailed-balance equilibrium, the perturbed mass-action dynamics of a chemical reaction network (CRN) map exactly onto an electrical-flow problem on the bipartite species-reaction graph: chemical potentials become electrical potentials, Onsager coefficients become conductances, and the instantaneous Gibbs free-energy consumption equals the dissipated electrical energy. We exploit this map to design quantum walk algorithms that decide species reachability, sample reachable species, approximate any individual steady-state reaction flux, and estimate the total Gibbs dissipation. The first three follow from standard electrical-flow quantum walks; the last is non-trivial because the chemical flow is not the minimum-energy electrical flow on the same graph. We resolve this via a new use of alternative neighbourhoods in multidimensional quantum walks, which forces the walker onto the mass-action flow whenever the network is $\sigma-M$ rigid. In an adjacency-matrix QRAM access model the algorithms achieve up to a quadratic speedup over classical methods -- for example $\Omega(n^{3/2})$ vs $\Omega(n^2)$ for reachability -- and dissipation-aware bounds tighten this further when the perturbation is concentrated.

quant-ph

In-Materia Speech Recognition

With the rise of decentralized computing, as in the Internet of Things, autonomous driving, and personalized healthcare, it is increasingly important to process time-dependent signals at the edge efficiently: right at the place where the temporal data are collected, avoiding time-consuming, insecure, and costly communication with a centralized computing facility (or cloud). However, modern-day processors often cannot meet the restrained power and time budgets of edge systems because of intrinsic limitations imposed by their architecture (von Neumann bottleneck) or domain conversions (analogue-to-digital and time-to-frequency). Here, we propose an edge temporal-signal processor based on two in-materia computing systems for both feature extraction and classification, reaching a software-level accuracy of 96.2% for the TI-46-Word speech-recognition task. First, a nonlinear, room-temperature dopant-network-processing-unit (DNPU) layer realizes analogue, time-domain feature extraction from the raw audio signals, similar to the human cochlea. Second, an analogue in-memory computing (AIMC) chip, consisting of memristive crossbar arrays, implements a compact neural network trained on the extracted features for classification. With the DNPU feature extraction consuming 100s nW and AIMC-based classification having the potential for less than 10 fJ per multiply-accumulate operation, our findings offer a promising avenue for advancing the compactness, efficiency, and performance of heterogeneous smart edge processors through in-materia computing hardware.

eess.AS

A Quantum Computing Approach for Multi-robot Coverage Path Planning

This paper tackles the multi-vehicle Coverage Path Planning (CPP) problem, crucial for applications like search and rescue or environmental monitoring. Due to its NP-hard nature, finding optimal solutions becomes infeasible with larger problem sizes. This motivates the development of heuristic approaches that enhance efficiency even marginally. We propose a novel approach for exploring paths in a 2D grid, specifically designed for easy integration with the Quantum Alternating Operator Ansatz (QAOA), a powerful quantum heuristic. Our contribution includes: 1) An objective function tailored to solve the multi-vehicle CPP using QAOA. 2) Theoretical proofs guaranteeing the validity of the proposed approach. 3) Efficient construction of QAOA operators for practical implementation. 4) Resource estimation to assess the feasibility of QAOA execution. 5) Performance comparison against established algorithms like the Depth First Search. This work paves the way for leveraging quantum computing in optimizing multi-vehicle path planning, potentially leading to real-world advancements in various applications.

quant-ph

Quantifying the contribution of material and junction resistances in nano-networks

Networks of nanowires and nanosheets are important for many applications in printed electronics. However, the network conductivity and mobility are usually limited by the inter-particle junction resistance, a property that is challenging to minimise because it is difficult to measure. Here, we develop a simple model for conduction in networks of 1D or 2D nanomaterials, which allows us to extract junction and nanoparticle resistances from particle-size-dependent D.C. resistivity data of conducting and semiconducting materials. We find junction resistances in porous networks to scale with nanoparticle resistivity and vary from 5 Ohm for silver nanosheets to 25 GOhm for WS2 nanosheets. Moreover, our model allows junction and nanoparticle resistances to be extracted from A.C. impedance spectra of semiconducting networks. Impedance data links the high mobility (~7 cm2/Vs) of aligned networks of electrochemically exfoliated MoS2 nanosheets to low junction resistances of ~670 kOhm. Temperature-dependent impedance measurements allow us to quantitatively differentiate intra-nanosheet phonon-limited band-like transport from inter-nanosheet hopping for the first time.

cond-mat.mes-hall

Magneto-optical trap performance for high-bandwidth applications

We study the dynamics of a magneto-optical trap (MOT) operating at high-bandwidth. We find the absolute importance of high recapture efficiency between cycles to maintain a practical atom number. We develop a simple model accounting for MOT trapping forces and pressure induced collisions and validate with experimental data using $\mathrm{{}^{87}Rb}$. This is then applied to quantum sensing predicting a shot noise limited sensitivity of $\mathrm{10^{-7}g/\sqrt{Hz}}$ for a gravimeter at 100 Hz operation. The results are useful for understanding MOT operation at high-bandwidth, particularly in the context of developing mobile high-bandwidth quantum inertial sensors targeting dynamic environments and navigation applications.

physics.atom-ph

Effects of structure and temperature on the nature of excitons in the Mo0.6W0.4S2 alloys

We have studied the nature of excitons in the transition metal dichalcogenide alloy Mo0.6W0.4 S2, compared to pure MoS2 and WS2 grown by atomic layer deposition (ALD). For this, optical absorption/transmission spectroscopy and time-dependent density functional theory (TDDFT) were used. Effects of temperature on the A and B exciton peak energies and linewidths in the optical transmission spectra were compared between the alloy and pure MoS2 and WS2. On increasing the temperature from 25 K to 293 K the energy of the A and B exciton peaks decreases, while their linewidth increases due to exciton-phonon interactions. The exciton-phonon interactions in the alloy are closer to those for MoS2 than WS2. This suggests that the exciton wave functions in the alloy have a larger amplitude on Mo atoms than on W atoms. The experimental absorption spectra could be reproduced by TDDFT calculations. Interestingly, for the alloy the Mo and W atoms had to be distributed over all layers. Conversely, we could not reproduce the experimental alloy spectrum by calculations on a structure with alternating layers, in which every other layer contains only Mo atoms and the layers in between also W atoms. For the latter atomic arrangement, the TDDFT calculations yielded an additional optical absorption peak that could be due to excitons with some charge transfer character. From these results we conclude that ALD yields an alloy in which Mo and W atoms are distributed uniformly among all layers.

cond-mat.mtrl-sci

Generating Triplets in Organic Semiconductor Tetracene upon Photoexcitation of Transition Metal Dichalcogenide ReS$_2$

We studied the dynamics of transfer of photoexcited electronic states in a bilayer of the two-dimensional transition metal dichalcogenide ReS$_2$ and tetracene, with the aim to produce triplets in the latter. This material combination was used as the band gap of ReS$_2$ (1.5 eV) is slightly larger than the triplet energy of tetracene (1.25 eV). Using time-resolved optical absorption spectroscopy, transfer of photoexcited states from ReS$_2$ to triplet states in tetracene was found to occur within 5 ps with an efficiency near 38%. This result opens up new possibilities for heterostructure design of two-dimensional materials with suitable organics to produce long-lived triplets. Triplets are of interest as sensitizers in a wide variety of applications including optoelectronics, photovoltaics, photocatalysis, and photon upconversion.

physics.chem-ph

Unraveling the Photophysics of Liquid-Phase Exfoliated Two-Dimensional ReS2 Nanoflakes

Few-layered transition metal dichalcogenides (TMDs) are increasingly popular materials for optoelectronics and catalysis. Amongst the various types of TMDs available today, rhenium-chalcogenides (ReX2) stand out due to their remarkable electronic structure, such as the occurrence of anisotropic excitons and potential direct bandgap behavior throughout multi-layered stacks. In this letter, we have analyzed the nature and dynamics of charge carriers in highly crystalline liquid-phase exfoliated ReS2, using a unique combination of optical pump-THz probe and broadband transient absorption spectroscopy. Two distinct time regimes are identified, both of which are dominated by unbound charge carriers despite the high exciton binding energy. In the first time regime, the unbound charge carriers cause an increase and a broadening of the exciton absorption band. In the second time regime, a peculiar narrowing of the excitonic absorption profile is observed, which we assign to the presence of built-in fields and/or charged defects. Our results pave the way to analyze spectrally complex transient absorption measurements on layered TMD materials and indicate the potential for ReS2 to produce mobile free charge carriers, a feat relevant for photovoltaic applications.

cond-mat.mtrl-sci

Emergence of New Materials for Exploiting Highly Efficient Carrier Multiplication in Photovoltaics

In conventional solar cell semiconductor materials (predominantly Si) photons with energy higher than the band gap initially generate hot electrons and holes, which subsequently cool down to the band edge by phonon emission. Due to the latter process, the energy of the charge carriers in excess of the band gap is lost as heat and does not contribute to the conversion of solar to electrical power. If the excess energy is more than the band gap it can in principle be utilized through a process known as carrier multiplication (CM) in which a single absorbed photon generates two (or more) pairs of electrons and holes. Thus, through CM the photon energy above twice the band gap enhances the photocurrent of a solar cell. In this review, we discuss recent progress in CM research in terms of fundamental understanding, emergence of new materials for efficient CM, and CM based solar cell applications. Based on our current understanding, the CM threshold can get close to the minimal value of twice the band gap in materials where a photon induces an asymmetric electronic transition from a deeper valence band or to a higher conduction band. In addition, the material must have a low exciton binding energy and high charge carrier mobility, so that photoexcitation leads directly to the formation of free charges that can readily be extracted at external electrodes of a photovoltaic device. Percolative networks of coupled PbSe quantum dots, Sn/Pb based halide perovskites, and transition metal dichalcogenides such as MoTe2 fulfill these requirements to a large extent. These findings point towards promising prospects for further development of new materials for highly efficient photovoltaics.

physics.app-ph

Change in Tetracene Polymorphism Facilitates Triplet Transfer in Singlet Fission-Sensitized Silicon Solar Cells

Singlet fission in tetracene generates two triplet excitons per absorbed photon. If these triplet excitons can be effectively transferred into silicon (Si) then additional photocurrent can be generated from photons above the bandgap of Si. This could alleviate the thermalization loss and increase the efficiency of conventional Si solar cells. Here we show that a change in the polymorphism of tetracene deposited on Si due to air exposure, facilitates triplet transfer from tetracene into Si. Magnetic field-dependent photocurrent measurements confirm that triplet excitons contribute to the photocurrent. The decay of tetracene delayed photoluminescence was used to determine a triplet transfer time of 215 ns and a maximum yield of triplet transfer into Si of ~50 %. Our study suggests that control over the morphology of tetracene during deposition will be of great importance to boost the triplet transfer yield further.

physics.app-ph

Photoexcitation of PbS Nanosheets Leads to Highly Mobile Charge Carriers and Stable Excitons

Solution-processable two-dimensional (2D) semiconductors with chemically tunable thickness and associated tunable band gaps are highly promising materials for ultrathin optoelectronics. Here, the properties of free charge carriers and excitons in 2D PbS nanosheets of different thickness are investigated by means of optical pump-terahertz probe spectroscopy. By analyzing the frequency-dependent THz response, a large quantum yield of excitons is found. The scattering time of free charge carriers increases with nanosheet thickness, which is ascribed to reduced effects of surface defects and ligands in thicker nanosheets. The data discussed provide values for the DC mobility in the range 550 - 1000 cm2/Vs for PbS nanosheets with thicknesses ranging from 4 to 16 nm. Results underpin the suitability of colloidal 2D PbS nanosheets for optoelectronic applications.

physics.chem-ph

Ligand-Surface Interactions and Surface Oxidation of Colloidal PbSe Quantum Dots Revealed by Thin-film Positron Annihilation Methods

Positron Two Dimensional Angular Correlation of Annihilation Radiation (2D-ACAR) measurements reveal modifications of the electronic structure and composition at the surfaces of PbSe quantum dots (QDs), deposited as thin films, produced by various ligands containing either oxygen or nitrogen atoms. In particular, the 2D-ACAR measurements on thin films of colloidal PbSe QDs capped with oleic acid ligands yield an increased intensity in the electron momentum density (EMD) at high momenta compared to PbSe quantum dots capped with oleylamine. Moreover, the EMD of PbSe QDs is strongly affected by the small ethylediamine ligands, since these molecules lead to small distances between QDs and favor neck formation between near neighbor QDs, inducing electronic coupling between neighboring QDs. The high sensitivity to the presence of oxygen atoms at the surface can be also exploited to monitor the surface oxidation of PbSe QDs upon exposure to air. Our study clearly demonstrates that positron annihilation spectroscopy applied to thin films can probe surface transformations of colloidal semiconductor QDs embedded in functional layers.

cond-mat.mtrl-sci