arXiv subjects

Samuel D. Seddon

Publications and source records attributed to Samuel D. Seddon.

6 recordsLinked to original sources

arXiv2026

Uniaxial strain-driven ferroelastic domain control in LaAlO3

Multiferroic domain walls in functional oxides exhibit properties distinct from the bulk and are increasingly exploited as active elements in nanoelectronic and photonic devices. Deterministic control of domain populations has typically remained limited to local control, or removal with temperature. Here we demonstrate continuous, reversible manipulation of the ferroelastic domain structure in single-crystal LaAlO$_3$ using in-situ uniaxial strain. Combining atomic force microscopy, X-ray diffraction, and Raman spectroscopy with first-principles calculations we map the complete microscopic evolution of the twin domain population through the strain-driven transition from the rhombohedral $R\bar{3}c$ ground state toward the predicted orthorhombic $Fmmm$ phase. Applied strains below $0.5\%$ produce pronounced surface flattening and large-scale domain reorganisation, establishing uniaxial strain as a technically accessible control parameter for ferroelastic domain engineering. These results open a route to active, real-time programming of domain architectures in LaAlO$_3$-based heterostructures, with implications for strain-tunable superconducting interfaces, nanoscale phonon-polariton optics, and ultrafast lattice control.

cond-mat.mtrl-sci↗

arXiv2026

Ultra-high THz-field-confinement at LaAlO3 twin walls

The control and steering of light at nanometre length scales is crucial for the development of both fundamental science and nanophotonic technologies. Recent advancements have been achieved by exploiting various crystalline anisotropies, allowing for subdiffractional and diffraction-less canalisation of energy. These studies in particular benefit from stacking and twisting of 2D materials, whereas corresponding capabilities of anisotropic bulk crystals are rather unexplored. In this work, we show that ferroelastic twin walls - crystallographically perfect 2D-sheets that separate regions of differently oriented domains - in the distorted perovskite LaAlO3 provide a natural platform for broadband lateral confinement and superb canalisation of light at the nanoscale. Without fabrication processes, the electromagnetic fields localised at such walls exhibit lateral optical sizes up to 260 times smaller than the free-space wavelength. Depending on the adjacent domain orientation and frequency, the twin wall pattern preferentially concentrates or repels the electromagnetic energy, constituting a natural building block towards broadband MIR and THz nanophotonics for polaritonic circuitry.

physics.optics↗

arXiv2025

In-situ SHG microscopy investigation of the domain-wall-conductivity enhancement procedure in lithium niobate

Conductive domain walls (CDWs) in the uniaxial ferroelectric lithium niobate (LiNbO$_3$, LN) have attracted a lot of interest as potential elements in 2D nanoelectronics, due to their orders-of-magnitude larger electronic AC and DC conductivities as compared to the host material. On the way towards generating standardized CDWs into z-cut bulk LN crystals with controllable geometry and electrical properties, we have encountered setbacks recently: Although the first preparation step, i.e., the established UV-light-assisted liquid-electrode poling, reliably creates fully penetrating hexagonal domains with the DWs being aligned almost parallel to the polarization axis, the second step in the DW 'conductivity-enhancement' process through post-growth voltage ramping, resulted in randomly-shaped DWs as reflected in their different current-voltage (I-V) characteristics even after having applied the same process parameters. To clarify this phenomenon, we present here an \textit{in-situ} and time-resolved second-harmonic-generation (SHG) microscopy investigation of DW samples of different sizes, monitoring the DW evolution during that critical voltage ramping, which allowed us to reconstruct the 3D DW shapes both prior to and after the enhancement process. As a result, we are able to map the temporal changes of the local DW inclination angle $α$, and to quantify the DW velocity. As a consequence, we need to re-assess and re-think the origin of the DW conductivity (DWC) in LN: The hitherto assumed simple connection between $α$ and the DWC can not be generalized, since point defects accumulating along DWs act as extra sources for charge carrier trapping/release, significantly contributing to the DW current.

cond-mat.mtrl-sci↗

arXiv2024

Probing Ferroelectric Phase Transitions in Barium Titanate Single Crystals via $\it{in-situ}$ Second Harmonic Generation Microscopy

Ferroelectric materials play a crucial role in a broad range of technologies due to their unique properties that are deeply connected to the pattern and behavior of their ferroelectric (FE) domains. Chief among them, barium titanate (BaTiO$_3$; BTO) sees widespread applications such as in electronics but equally is a ferroelectric model system for fundamental research, e.g., to study the interplay of such FE domains, the domain walls (DWs), and their macroscopic properties, owed to BTO's multiple and experimentally accessible phase transitions. Here, we employ Second Harmonic Generation Microscopy (SHGM) to $\it{in-situ}$ investigate the cubic-to-tetragonal (at $\sim$126$^\circ$C) and the tetragonal-to-orthorhombic (at $\sim$5$^\circ$C) phase transition in single-crystalline BTO via 3-dimensional (3D) DW mapping. We demonstrate that SHGM imaging provides the direct visualization of FE domain switching as well as the domain dynamics in 3D, shedding light on the interplay of the domain structure and the phase transition. These results allow us to extract the different transition temperatures locally, to unveil the hysteresis behavior, and to determine the type of phase transition at play (1st/2nd order) from the recorded SHGM data. The capabilities of SHGM in uncovering these crucial phenomena can easily be applied to other ferroelectrics to provide new possibilities for $\it{in-situ}$ engineering of advanced ferroic devices.

cond-mat.mtrl-sci↗

arXiv2023

Hall mobilities and sheet carrier densities in a single LiNbO$_3$ conductive ferroelectric domain wall

For the last decade, conductive domain walls (CDWs) in single crystals of the uniaxial model ferroelectric lithium niobate (LiNbO$_3$, LNO) have shown to reach resistances more than 10 orders of magnitude lower as compared to the surrounding bulk, with charge carriers being firmly confined to sheets of a few nanometers in width. LNO thus currently witnesses an increased attention since bearing the potential for variably designing room-temperature nanoelectronic circuits and devices based on such CDWs. In this context, the reliable determination of the fundamental transport parameters of LNO CDWs, in particular the 2D charge carrier density $n_{2D}$ and the Hall mobility $μ_{H}$ of the majority carriers, are of highest interest. In this contribution, we present and apply a robust and easy-to-prepare Hall-effect measurement setup by adapting the standard 4-probe van-der-Pauw method to contact a single, hexagonally-shaped domain wall that fully penetrates the 200-$μ$m-thick LNO bulk single crystal. We then determine $n_{2D}$ and $μ_{H}$ for a set of external magnetic fields $B$ and prove the expected cosine-like angular dependence of the Hall voltage. Lastly, we present photo-Hall measurements of one and the same DW, by determining the impact of super-bandgap illumination on the 2D charge carrier density $n_{2D}$.

cond-mat.mtrl-sci↗

arXiv2023

Towards 3D Magnetic Force Microscopy

Magnetic force microscopy (MFM) is long established as a powerful tool for probing the local manifestation of magnetic nanostructures across a range of temperatures and applied stimuli. A major drawback of the technique, however, is that the detection of stray fields emanating from a samples surface rely on a uniaxial vertical cantilever oscillation, and thus are only sensitive to vertically oriented stray field components. The last two decades have shown an ever-increasing literature fascination for exotic topological windings where particular attention to in-plane magnetic moment rotation is highly valuable when identifying and understanding such systems. Here we present a new method of detecting in-plane magnetic stray field components, by utilizing a home made split-electrode excitation piezo that allows the simultaneous excitation of a cantilever at its fundamental flexural and torsional modes. This allows for the joint acquisition of traditional vertical mode (V-MFM) images and a lateral MFM (L-MFM) where the tip-cantilever system is only sensitive to stray fields acting perpendicular to the torsional axis of the cantilever.

physics.ins-det↗