arXiv subjects

Sandra Ruiz-Gómez

Publications and source records attributed to Sandra Ruiz-Gómez.

16 recordsLinked to original sources

arXiv2026

Non-reciprocity and exchange-spring delay of domain-wall Walker breakdown in magnetic nanowires with azimuthal magnetization

Domain-wall (DW) motion is a crucial process involved in magnetization reversal, be it under magnetic field or spin-polarized current stimulus. In most cases the DW speed does not exceed $\approx$100m/s and collapses above a given threshold of the stimulus, an effect known as Walker breakdown. A few specific material properties have been identified to delay the breakdown of speed by increasing the energy barrier preventing internal precession. We show that in a 3D nanomagnetic system, here with vortex-state domains, the topology of the magnetization distribution may intrinsically and robustly delay the Walker breakdown due to an exchange-spring effect. However, in contrast to situations in lower dimension, the motion remains steady-state. In addition, curvature induces a major non-reciprocal effect, delaying or not the Walker breakdown depending on the sequence of chiralities of the azimuthal domains on both sides of the DW, independent of its direction of motion.

cond-mat.mes-hall↗

arXiv2026

Tuning Structure and Magnetism in Large-Scale 2D Ferromagnet Fe$_3$GeTe$_2$ through Ni Doping

Two-dimensional ferromagnets with strong perpendicular magnetic anisotropy exhibit magnetic order down to the monolayer thickness, beneficial for energy-efficient spintronic devices. In this work, molecular beam epitaxy has been employed to realize controlled Ni-doping in Fe$_{3}$GeTe$_{2}$ (FGT) epitaxial films. MBE not only enables a large-scale growth of 2D films, but also allows a precise control over thickness and doping. X-ray diffraction and scanning transmission electron microscopy (STEM) reveal the formation of high-quality epitaxial films of pristine and Ni-doped FGT on graphene via van der Waals (vdW) epitaxy. Integrated differential phase contrast STEM images further provide in-depth information on Ni substitution and intercalation into the vdW gaps. Ni incorporation in doped films results in the shrinking of both in-plane and out-of-plane lattice parameters. Superconducting Quantum Interference Device, Hall, and X-ray magnetic circular dichroism measurements were utilized to probe the ferromagnetic properties of the films. Due to both Ni substitution and intercalation into the vdW gaps for Ni-doped FGT films, we observed a suppression of PMA and a drastic reduction in the Curie temperature down to 50 K. Our density functional theory based calculations of structural and magnetic properties further supports and provide deep insights into the variations of magnetic exchange interaction parameters and atom-projected magnetocrystalline anisotropy energies due to Ni doping to understand the experimental observations.

cond-mat.mtrl-sci↗

arXiv2025

Moving magnetic domain walls with sound alone

Surface Acoustic Waves (SAW) have been used in spintronic applications to decrease the magnetic field or the electric current required to act on the magnetization. A common belief is that a SAW alone cannot achieve a directed magnetic switching in a device without an assisting magnetic field or electric current. In this work, we demonstrate magnetic domain wall motion driven solely by an acoustic wave. Using XMCD-PEEM, we show extensive evidence of SAW-induced and field-free magnetic domain wall motion (DW) in the direction of the wave propagation. Our micromagnetic simulations reveal a mechanism that allows the SAW to transfer linear momentum to the DW. Experimentally, the largest DW average velocity measured was ~12 m/s, although our simulations predict that velocities in the range of 100 m/s could be attained. This new mechanism opens the door to designing innovative spintronic devices where the magnetization can be controlled exclusively by an acoustic wave.

cond-mat.mes-hall↗

arXiv2025

Nanoscale Mapping of Magnetic Orientations with Complex X-ray Magnetic Linear Dichroism

Compensated magnets are of increasing interest for both fundamental research and applications, with their net-zero magnetization leading to ultrafast dynamics and robust order. To understand and control this order, nanoscale mapping of local domain structures is necessary. One of the main routes to mapping antiferromagnetic order is X-ray magnetic linear dichroism (XMLD), which probes the local orientation of the Néel vector. However, XMLD imaging typically suffers from weak contrast and has mainly been limited to surface-sensitive techniques. Here, we harness coherent diffractive imaging to map the complex XMLD spectroscopically, and identify the phase linear dichroism as a high-contrast, high-resolution mechanism for imaging magnetic order. By applying X-ray spectroptychography to a model sample, we retrieve the full complex XMLD spectrum. Combining this with hierarchical clustering, we resolve the spatial distribution of probed domains by their distinct spectral signatures, providing a robust method for analyzing magnetic configurations with weak signals. Our results show that phase contrast is significantly stronger than the corresponding absorption contrast, offering higher spatial-resolution magnetic imaging. This approach establishes a reliable, element- and orbital-sensitive tool for studying compensated magnets.

cond-mat.mes-hall↗

arXiv2023

Study of the magnetoelastic effect in nickel and cobalt thin films at GHz range using X-ray microscopy

We use surface acoustic waves of 1 and 3 GHz in hybrid piezoelectric-magnetic systems with either cobalt or nickel as a magnetic layer to generate magnetoacoustic waves and directly image them using stroboscopic X-ray magnetic circular dichroism imaging. Our measurements visualize and quantify the amplitudes of both acoustic and magnetic components of the magnetoacoustic waves, which are generated in the ferromagnetic layer and can propagate over millimeter distances. Additionally, we quantifiedy the magnetoelastic strain component for cobalt and nickel through micromagnetic simulations. We obtained a drop in the magnetoacoustic signal at 3 GHz suggesting a speed limit for the efficient magnetoelastic coupling in our hybrid devices.

cond-mat.mes-hall↗

arXiv2023

Hexaferrite-based permanent magnets with upper magnetic properties by cold sintering process via a non-aqueous solvent

The incessant technological pursuit towards a more sustainable and green future depends strongly on permanent magnets. At present, their use is widespread, making it imperative to develop new processing methods that generate highly competitive magnetic properties reducing the fabrication temperatures and costs. Herein, a novel strategy for developing dense sintered magnets based on Sr-hexaferrites with upper functional characteristics is presented. An innovative cold sintering approach using glacial acetic acid as novelty, followed by a post-annealing at 1100 °C, achieves a densification of the ceramic magnets of 92% with respect to the theoretical density and allows controlling the particle growth. After the cold sintering process, a fraction of amorphous SrO is identified, in addition to a partial transformation to α-Fe2O3 as secondary crystalline phase. 46 wt% of SrFe12O19 remains, which is mostly recuperated after the post-thermal treatment. These findings do not significantly modify the final structure of ferrite magnets, neither at short- nor long-range order. The innovative process has a positive impact on the magnetic properties, yielding competitive ferrite magnets at lower sintering temperatures with an energy efficiency of at least 25%, which opens up a new horizon in the field of rare-earth free permanent magnets and new possibilities in other applications.

cond-mat.mtrl-sci↗

arXiv2023

Dense strontium hexaferrite-based permanent magnet composites assisted by cold sintering process

The use of rare-earth-based permanent magnets is one of the critical points for the development of the current technology. On the one hand, industry of the rare-earths is highly polluting due to the negative environmental impact of their extraction and, on the other hand, the sector is potentially dependent on China. Therefore, investigation is required both in the development of rare-earth-free permanent magnets and in sintering processes that enable their greener fabrication with attractive magnetic properties at a more competitive price. This work presents the use of a cold sintering process (CSP) followed by a post-annealing at 1100 °C as a new way to sinter composite permanent magnets based on strontium ferrite (SFO). Composites that incorporate a percentage < 10% of an additional magnetic phase have been prepared and the morphological, structural and magnetic properties have been evaluated after each stage of the process. CSP induces a phase transformation of SFO in the composites, which is partially recovered by the post-thermal treatment improving the relative density to 92% and the magnetic response of the final magnets with a coercivity of up to 3.0 kOe. Control of the magnetic properties is possible through the composition and the grain size in the sintered magnets. These attractive results show the potential of the sintering approach as an alternative to develop modern rare-earth-free composite permanent magnets.

cond-mat.mtrl-sci↗

arXiv2023

A Platform for Addressing Individual Magnetite Islands Grown Epitaxially on Ru(0001) and Manipulating Their Magnetic Domains

We have grown high-quality magnetite micrometric islands on ruthenium stripes on sapphire through a combination of magnetron sputtering (Ru film), high-temperature molecular beam epitaxy (oxide islands), and optical lithography. The samples have been characterized by atomic force microscopy, Raman spectroscopy, X-ray absorption and magnetic circular dichroism in a photoemission microscope. The magnetic domains on the magnetite islands can be modified by the application of current pulses through the Ru stripes in combination with magnetic fields. The modification of the magnetic domains is explained by the Oersted field generated by the electrical current flowing through the stripes underneath the magnetite nanostructures. The fabrication method is applicable to a wide variety of rock salt and spinel oxides.

cond-mat.mtrl-sci↗

arXiv2023

Magneto-Acoustic Waves in antiferromagnetic CuMnAs excited by Surface Acoustic Waves

Magnetoelastic effects in antiferromagnetic CuMnAs are investigated by applying dynamic strain in the 0.01% range through surface acoustic waves in the GaAs substrate. The magnetic state of the CuMnAs/GaAs is characterized by a multitude of submicron-sized domains which we image by x-ray magnetic linear dichroism combined with photoemission electron microscopy. Within the explored strain range, CuMnAs shows magnetoelastic effects in the form of Néel vector waves with micrometer wavelength, which corresponds to an averaged overall spin-axis rotation up to 2.4 deg driven by the time-dependent strain from the surface acoustic wave. Measurements at different temperatures indicate a reduction of the wave amplitude when lowering the temperature. However, no domain wall motion has been detected on the nanosecond timescale

cond-mat.mes-hall↗

arXiv2023

GHz sample excitation at the ALBA-PEEM

We describe a setup that is used for high-frequency electrical sample excitation in a cathode lens electron microscope with the sample stage at high voltage as used in many synchrotron light sources. Electrical signals are transmitted by dedicated high-frequency components to the printed circuit board supporting the sample. Sub-miniature push-on connectors (SMP) are used to realize the connection in the ultra-high vacuum chamber, bypassing the standard feedthrough. A bandwidth up to 4 GHz with -6 dB attenuation was measured at the sample position, which allows to apply sub-nanosecond pulses. We describe different electronic sample excitation schemes and demonstrate a spatial resolution of 56 nm employing the new setup.

cond-mat.soft↗

arXiv2023

Current-driven dynamics and ratchet effect of skyrmion bubbles in a ferrimagnetic insulator

Magnetic skyrmions are compact chiral spin textures that exhibit a rich variety of topological phenomena and hold potential for developing high-density memory devices and novel computing schemes driven by spin currents. Here, we demonstrate room temperature interfacial stabilization and current-driven control of skyrmion bubbles in the ferrimagnetic insulator Tm3Fe5O12 (TmIG) coupled to Pt. We track the current-induced motion of individual skyrmion bubbles. The ferrimagnetic order of the crystal together with the interplay of spin-orbit torques and pinning determine the skyrmion dynamics in TmIG and result in a strong skyrmion Hall effect characterized by a negative deflection angle and hopping motion. Further, we show that the velocity and depinning threshold of the skyrmion bubbles can be modified by exchange coupling TmIG to an in-plane magnetized Y3Fe5O12 layer, which distorts the spin texture of the skyrmions and leads to a directional-dependent rectification of their dynamics. This effect, which is equivalent to a magnetic ratchet, is exploited to control the skyrmion flow in a racetrack-like device.

cond-mat.mes-hall↗

arXiv2022

Size effects in the Verwey transition of nanometer-thick micron-wide magnetite crystals

We have monitored the Verwey transition in micrometer-wide, nanometer-thick magnetite islands on epitaxial Ru films on Al2O3(0001) using Raman spectroscopy. The islands have been grown by high-temperature oxygen-assisted molecular beam epitaxy. Below 100 K and for thicknesses above 20 nm the Raman spectra correspond to those observed in bulk crystals and high quality thin films for the sub-Verwey magnetite structure. At room temperature the width of the cubic phase modes is similar to the best reported in bulk crystals, indicating a similar level of electron-phonon interaction. The evolution of the Raman spectra upon cooling suggests that for islands thicker than 20 nm, structural changes appear first at temperatures starting at 150 K and the Verwey transition itself takes place at around 115 K. However, islands thinner than 20 nm show a very different Raman spectra indicating that while a transition takes place, the charge order of the ultrathin islands differs markedly from their thicker counterparts

cond-mat.mes-hall↗

arXiv2022

Magnetic domain wall pinning in cobalt ferrite microstructures

A detailed correlative structural, magnetic and chemical analysis of non-stoichiometric cobalt ferrite micrometric crystals was performed by x-ray magnetic circular dichroism combined with photoemission microscopy, low energy electron microscopy, and atomic force microscopy. The vector magnetization at the nanoscale is obtained from magnetic images at different x-ray incidence angles and compared with micromagnetic simulations, revealing the presence of defects which pin the magnetic domain walls. A comparison of different types of defects and the domain walls location suggests that the main source of pinning in these microcrystals are linear structural defects induced in the spinel by the substrate steps underneath the islands.

cond-mat.mtrl-sci↗

arXiv2021

Imprint from ferromagnetic skyrmions in an antiferromagnet via exchange bias

Magnetic skyrmions are topological spin textures holding great potential as nanoscale information carriers. Recently, skyrmions have been predicted in antiferromagnets, with key advantages in terms of stability, size, and dynamical properties over their ferromagnetic analogs. However, their experimental demonstration is still lacking. Here, we show the imprint from ferromagnetic skyrmions into a thin film of an IrMn antiferromagnet, at room temperature and zero external magnetic field, using exchange-bias. Using high-spatial-resolution x-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM), we observed the imprinted spin textures within the IrMn from the XMCD signal of the uncompensated Mn spins at the interface with the ferromagnet. This result opens up a path for logic and memory devices based on skyrmion manipulation in antiferromagnets.

cond-mat.mtrl-sci↗

arXiv2021

Direct X-ray detection of the spin Hall effect in CuBi

The spin Hall effect and its inverse are important spin-charge conversion mechanisms. The direct spin Hall effect induces a surface spin accumulation from a transverse charge current due to spin orbit coupling even in non-magnetic conductors. However, most detection schemes involve additional interfaces, leading to large scattering in reported data. Here we perform interface free x-ray spectroscopy measurements at the Cu L_{3,2} absorption edges of highly Bi-doped Cu (Cu_{95}Bi_{5}). The detected X-ray magnetic circular dichroism (XMCD) signal corresponds to an induced magnetic moment of (2.7 +/- 0.5) x 10-12 μ_{B} A^{-1} cm^{2} per Cu atom averaged over the probing depth, which is of the same order as for Pt measured by magneto-optics. The results highlight the importance of interface free measurements to assess material parameters and the potential of CuBi for spin-charge conversion applications.

cond-mat.mtrl-sci↗

arXiv2018

Large spin-mixing conductance in highly Bi-doped Cu thin films

Spin Hall effect provides an efficient tool for the conversion of a charge current into a spin current, opening the possibility of producing pure spin currents in non-magnetic materials for the next generation of spintronics devices. In this sense, giant Spin Hall Effect has been recently reported in Cu doped with 0.5 % Bi grown by sputtering and larger values are expected for larger Bi doping, according to first principles calculations. In this work we demonstrate the possibility of doping Cu with up to 10 % of Bi atoms without evidences of Bi surface segregation or cluster formation, as studied by different microscopic and spectroscopic techniques. In addition, YIG/BiCu structures have been grown, showing a spin mixing conductance larger that the one shown by similar Pt/YIG structures. These results reflects the potentiality of these new materials in spintronics devices.

cond-mat.mtrl-sci↗