arXiv subjects

Sarah J. Haigh

Publications and source records attributed to Sarah J. Haigh.

At least 37 records · Page 2Linked to original sources

arXiv2020

Atomic Resolution Imaging of CrBr$_{3}$ using Adhesion-Enhanced Grids

Suspended specimens of 2D crystals and their heterostructures are required for a range of studies including transmission electron microscopy (TEM), optical transmission experiments and nanomechanical testing. However, investigating the properties of laterally small 2D crystal specimens, including twisted bilayers and air sensitive materials, has been held back by the difficulty of fabricating the necessary clean suspended samples. Here we present a scalable solution which allows clean free-standing specimens to be realized with 100% yield by dry-stamping atomically thin 2D stacks onto a specially developed adhesion-enhanced support grid. Using this new capability, we demonstrate atomic resolution imaging of defect structures in atomically thin CrBr3, a novel magnetic material which degrades in ambient conditions.

cond-mat.mtrl-sci↗

arXiv2020

Holographic reconstruction of the interlayer distance of bilayer two-dimensional crystal samples from their convergent beam electron diffraction patterns

The convergent beam electron diffraction (CBED) patterns of twisted bilayer samples exhibit interference patterns in their CBED spots. Such interference patterns can be treated as off-axis holograms and the phase of the scattered waves, meaning the interlayer distance can be reconstructed. A detailed protocol of the reconstruction procedure is provided in this study. In addition, we derive an exact formula for reconstructing the interlayer distance from the recovered phase distribution, which takes into account the different chemical compositions of the individual monolayers. It is shown that one interference fringe in a CBED spot is sufficient to reconstruct the distance between the layers, which can be practical for imaging samples with a relatively small twist angle or when probing small sample regions. The quality of the reconstructed interlayer distance is studied as a function of the twist angle. At smaller twist angles, the reconstructed interlayer distance distribution is more precise and artefact free. At larger twist angles, artefacts due to the moiré structure appear in the reconstruction. A method for the reconstruction of the average interlayer distance is presented. As for resolution, the interlayer distance can be reconstructed by the holographic approach at an accuracy of 0.5 A, which is a few hundred times better than the intrinsic z-resolution of diffraction limited resolution, as expressed through the spread of the measured k-values. Moreover, we show that holographic CBED imaging can detect variations as small as 0.1 A in the interlayer distance, though the quantitative reconstruction of such variations suffers from large errors.

cond-mat.mes-hall↗

arXiv2020

Atomic reconstruction in twisted bilayers of transition metal dichalcogenides

Van der Waals heterostructures form a massive interdisciplinary research field, fueled by the rich material science opportunities presented by layer assembly of artificial solids with controlled composition, order and relative rotation of adjacent atomic planes. Here we use atomic resolution transmission electron microscopy and multiscale modeling to show that the lattice of MoS$_2$ and WS$_2$ bilayers twisted to a small angle, $θ<3^{\circ}$, reconstructs into energetically favorable stacking domains separated by a network of stacking faults. For crystal alignments close to 3R stacking, a tessellated pattern of mirror reflected triangular 3R domains emerges, separated by a network of partial dislocations which persist to the smallest twist angles. Scanning tunneling measurements show that the electronic properties of those 3R domains appear qualitatively different from 2H TMDs, featuring layer-polarized conduction band states caused by lack of both inversion and mirror symmetry. In contrast, for alignments close to 2H stacking, stable 2H domains dominate, with nuclei of an earlier unnoticed metastable phase limited to $\sim$ 5nm in size. This appears as a kagome-like pattern at $θ\sim 1^{\circ}$, transitioning at $θ\rightarrow 0$ to a hexagonal array of screw dislocations separating large-area 2H domains.

cond-mat.mes-hall↗

arXiv2020

Large magnetoelectric coupling in multiferroic oxide heterostructures assembled via epitaxial lift-off

The strain dependent functional properties of epitaxial transition metal oxide films can be significantly modified via substrate selection. However, large lattice mismatches preclude dislocation-free epitaxial growth on ferroelectric substrates, whose strain states are modified by applied electric fields. Here we overcome this mismatch problem by depositing an epitaxial film of ferromagnetic La0.7Sr0.3MnO3 on a single crystal substrate of well lattice matched SrTiO3 via a film of SrRuO3 that we subsequently dissolved, permitting the transfer of unstrained La0.7Sr0.3MnO3 to a ferroelectric substrate of 0.68Pb(Mg1/3Nb2/3)O3 0.32PbTiO3 in a different crystallographic orientation. Ferroelectric domain switching, and a concomitant ferroelectric phase transition, produced large non volatile changes of magnetization that were mediated by magnetic domain rotations at locations defined by the microstructure - as revealed via high resolution vector maps of magnetization constructed from photoemission electron microscopy data, with contrast from x-ray magnetic circular dichroism. In future, our method may be exploited to control functional properties in dislocation free epitaxial films of any composition.

cond-mat.mtrl-sci↗

arXiv2020

Raman Fingerprints of Graphene Produced by Anodic Electrochemical Exfoliation

Electrochemical exfoliation is one of the most promising methods for scalable production of graphene. However, limited understanding of its Raman spectrum as well as lack of measurement standards for graphene strongly limit its industrial applications. In this work we show a systematic study of the Raman spectrum of electrochemically exfoliated graphene, produced using different electrolytes and different types of solvents in varying amounts. We demonstrate that no information on the thickness can be extracted from the shape of the 2D peak as this type of graphene is defective. Furthermore, the number of defects and the uniformity of the samples strongly depend on the experimental conditions, including post-processing. Under specific conditions, formation of short conductive trans-polyacetylene chains has been observed. Our Raman analysis provides guidance for the community on how to get information on defects coming from electrolyte, temperature and other experimental conditions, by making Raman spectroscopy a powerful metrology tool.

physics.app-ph↗

arXiv2020

Convergent beam electron diffraction of multilayer van der Waals structures

Convergent beam electron diffraction is routinely applied for studying deformation and local strain in thick crystals by matching the crystal structure to the observed intensity distributions. Recently, it has been demonstrated that CBED can be applied for imaging two-dimensional (2D) crystals where a direct reconstruction is possible and three-dimensional crystal deformations at a nanometre resolution can be retrieved. Here, we demonstrate that second-order effects allow for further information to be obtained regarding stacking arrangements between the crystals. Such effects are especially pronounced in samples consisting of multiple layers of 2D crystals. We show, using simulations and experiments, that twisted multilayer samples exhibit extra modulations of interference fringes in CBED patterns, i. e., a CBED moiré. A simple and robust method for the evaluation of the composition and the number of layers from a single-shot CBED pattern is demonstrated.

cond-mat.mes-hall↗

arXiv2019

Stacking Order in Graphite Films Controlled by Van der Waals Technology

In graphite crystals, layers of graphene reside in three equivalent, but distinct, stacking positions typically referred to as A, B, and C projections. The order in which the layers are stacked defines the electronic structure of the crystal, providing an exciting degree of freedom which can be exploited for designing graphitic materials with unusual properties including predicted high-temperature superconductivity and ferromagnetism. However, the lack of control of the stacking sequence limits most research to the stable ABA form of graphite. Here we demonstrate a strategy to control the stacking order using van der Waals technology. To this end, we first visualise the distribution of stacking domains in graphite films and then perform directional encapsulation of ABC-rich graphite crystallites with hexagonal boron nitride (hBN). We found that hBN-encapsulation which is introduced parallel to the graphite zigzag edges preserves ABC stacking, while encapsulation along the armchair edges transforms the stacking to ABA. The technique presented here should facilitate new research on the important properties of ABC graphite.

cond-mat.mes-hall↗

arXiv2019

Two-dimensional covalent crystals by chemical conversion of thin van der Waals materials

Most of the studied two-dimensional (2D) materials have been obtained by exfoliation of van der Waals crystals. Recently, there has been growing interest in fabricating synthetic 2D crystals which have no layered bulk analogues. These efforts have been focused mainly on the surface growth of molecules in high vacuum. Here, we report an approach to making 2D crystals of covalent solids by chemical conversion of van der Waals layers. As an example, we use 2D indium selenide (InSe) obtained by exfoliation and converted it by direct fluorination into indium fluoride (InF3), which has a non-layered, rhombohedral structure and therefore cannot be possibly obtained by exfoliation. The conversion of InSe into InF3 is found to be feasible for thicknesses down to three layers of InSe, and the obtained stable InF3 layers are doped with selenium. We study this new 2D material by optical, electron transport and Raman measurements and show that it is a semiconductor with a direct bandgap of 2.2 eV, exhibiting high optical transparency across the visible and infrared spectral ranges. We also demonstrate the scalability of our approach by chemical conversion of large-area, thin InSe laminates obtained by liquid exfoliation into InF3 films. The concept of chemical conversion of cleavable thin van der Waals crystals into covalently-bonded non-cleavable ones opens exciting prospects for synthesizing a wide variety of novel atomically thin covalent crystals.

cond-mat.mtrl-sci↗

arXiv2019

Self-limiting growth of two-dimensional palladium between graphene oxide layers

The ability of different materials to display self-limiting growth has recently attracted enormous attention due to the importance of nanoscale materials in applications for catalysis, energy conversion, (opto)electronics, etc. Here, we show that electrochemical deposition of palladium (Pd) between graphene oxide (GO) sheets result in a self-limiting growth of 5 nm thin Pd nanosheets. The self-limiting growth is found to be a consequence of strong interaction of Pd with the confining GO sheets which results in bulk growth of Pd being energetically unfavourable for larger thicknesses. Furthermore, we have successfully carried out liquid exfoliation of the resulting Pd-GO laminates to isolate Pd nanosheets and demonstrated their high efficiency in continuous flow catalysis and electrocatalysis.

physics.app-ph↗

arXiv2019

Indirect to direct gap crossover in two-dimensional InSe revealed by ARPES

Atomically thin films of III-VI post-transition metal chalcogenides (InSe and GaSe) form an interesting class of two-dimensional semiconductor that feature strong variations of their band gap as a function of the number of layers in the crystal [1-4] and, specifically for InSe, an earlier predicted crossover from a direct gap in the bulk [5,6] to a weakly indirect band gap in monolayers and bilayers [7-11]. Here, we apply angle resolved photoemission spectroscopy with submicrometer spatial resolution ($μ$ARPES) to visualise the layer-dependent valence band structure of mechanically exfoliated crystals of InSe. We show that for 1 layer and 2 layer InSe the valence band maxima are away from the $\mathbfΓ$-point, forming an indirect gap, with the conduction band edge known to be at the $\mathbfΓ$-point. In contrast, for six or more layers the bandgap becomes direct, in good agreement with theoretical predictions. The high-quality monolayer and bilayer samples enables us to resolve, in the photoluminescence spectra, the band-edge exciton (A) from the exciton (B) involving holes in a pair of deeper valence bands, degenerate at $\mathbfΓ$, with the splitting that agrees with both $μ$ARPES data and the results of DFT modelling. Due to the difference in symmetry between these two valence bands, light emitted by the A-exciton should be predominantly polarised perpendicular to the plane of the two-dimensional crystal, which we have verified for few-layer InSe crystals.

cond-mat.mtrl-sci↗

arXiv2018

Convergent and divergent beam electron holography and reconstruction of adsorbates on free-standing two-dimensional crystals

Van der Waals heterostructures have been lately intensively studied because they offer a large variety of properties that can be controlled by selecting 2D materials and their sequence in the stack. The exact arrangement of the layers as well as the exact arrangement of the atoms within the layers, both are important for the properties of the resulting device. Recently it has been demonstrated that convergent beam electron diffraction (CBED) allows quantitative three-dimensional mapping of atomic positions in three-dimensional materials from a single CBED pattern. In this study we investigate CBED in more detail by simulating and performing various CBED regimes, with convergent and divergent wavefronts, on a somewhat simplified system: a 2D monolayer crystal. In CBED, each CBED spot is in fact an in-line hologram of the sample, where in-line holography is known to exhibit high intensity contrast in detection of weak phase objects that are not detectable in conventional in-focus imaging mode. Adsorbates exhibit strong intensity contrast in zero and higher order CBED spots, whereas lattice deformation such as strain or rippling cause noticeable intensity contrast only in the first and higher order CBED spots. The individual CBED spots can be reconstructed as typical in-line holograms, and the resolution of 2.13 A can be in principle achieved in the reconstructions. We provide simulated and experimental examples of CBED of a 2D monolayer crystal. The simulations show that individual CBED spots can be treated as in-line holograms and sample distributions such as adsorbates, can be reconstructed. Individual atoms can be reconstructed from a single CBED pattern provided the later exhibits high-order CBED spots. Examples of reconstructions obtained from experimental CBED patterns, at a resolution of 2.7 A, are shown.

cond-mat.mtrl-sci↗

arXiv2018

Magnetoresistance in Co-hBN-NiFe tunnel junctions enhanced by resonant tunneling through single defects in ultrathin hBN barriers

Hexagonal boron nitride (hBN) is a prototypical high-quality two-dimensional insulator and an ideal material to study tunneling phenomena, as it can be easily integrated in vertical van der Waals devices. For spintronic devices, its potential has been demonstrated both for efficient spin injection in lateral spin valves and as a barrier in magnetic tunnel junctions (MTJs). Here we reveal the effect of point defects inevitably present in mechanically exfoliated hBN on the tunnel magnetoresistance of Co-hBN-NiFe MTJs. We observe a clear enhancement of both the conductance and magnetoresistance of the junction at well-defined bias voltages, indicating resonant tunneling through magnetic (spin-polarized) defect states. The spin polarization of the defect states is attributed to exchange coupling of a paramagnetic impurity in the few-atomic-layer thick hBN to the ferromagnetic electrodes. This is confirmed by excellent agreement with theoretical modelling. Our findings should be taken into account in analyzing tunneling processes in hBN-based magnetic devices. More generally, our study shows the potential of using atomically thin hBN barriers with defects to engineer the magnetoresistance of MTJs and to achieve spin filtering, opening the door towards exploiting the spin degree of freedom in current studies of point defects as quantum emitters.

cond-mat.mes-hall↗

arXiv2018

Infrared-to-violet tunable optical activity in atomic films of GaSe, InSe, and their heterostructures

Two-dimensional semiconductors - atomic layers of materials with covalent intra-layer bonding and weak (van der Waals or quadrupole) coupling between the layers - are a new class of materials with great potential for optoelectronic applications. Among those, a special position is now being taken by post-transition metal chalcogenides (PTMC), InSe and GaSe. It has recently been found that the band gap in 2D crystals of InSe more than doubles in the monolayer compared to thick multilayer crystals, while the high mobility of conduction band electrons is promoted by their light in-plane mass. Here, we use Raman and PL measurements of encapsulated few layer samples, coupled with accurate atomic force and transmission electron microscope structural characterisation to reveal new optical properties of atomically thin GaSe preserved by hBN encapsulation. The band gaps we observe complement the spectral range provided by InSe films, so that optical activity of these two almost lattice-matched PTMC films and their heterostructures densely cover the spectrum of photons from violet to infrared. We demonstrate the realisation of the latter by the first observation of interlayer excitonic photoluminescence in few-layer InSe-GaSe heterostructures. The spatially indirect transition is direct in k-space and therefore is bright, while its energy can be tuned in a broad range by the number of layers.

cond-mat.mes-hall↗

arXiv2018

Convergent beam electron holography for analysis of van der Waals heterostructures

Van der Waals heterostructures, which explore the synergetic properties of two-dimensional (2D) materials when assembled into three-dimensional stacks, have already brought to life a number of exciting new phenomena and novel electronic devices. Still, the interaction between the layers in such assembly, possible surface reconstruction, intrinsic and extrinsic defects are very difficult to characterise by any method, because of the single-atomic nature of the crystals involved. Here we present a convergent beam electron holographic technique which allows imaging of the stacking order in such heterostructures. Based on the interference of electron waves scattered on different crystals in the stack, this approach allows one to reconstruct the relative rotation, stretching, out-of-plane corrugation of the layers with atomic precision. Being holographic in nature, our approach allows extraction of quantitative information about the three-dimensional structure of the typical defects from a single image covering thousands of square nanometres. Furthermore, qualitative information about the defects in the stack can be extracted from the convergent diffraction patterns even without reconstruction - simply by comparing the patterns in different diffraction spots. We expect that convergent beam electron holography will be widely used to study the properties of van der Waals heterostructures.

cond-mat.mes-hall↗

arXiv2017

Nanometer Resolution Elemental Mapping in Graphene-based TEM Liquid Cells

We demonstrate a new design of graphene liquid cell consisting of a thin lithographically patterned hexagonal boron nitride crystal encapsulated from both sides with graphene windows. The ultra-thin window liquid cells produced have precisely controlled volumes and thicknesses, and are robust to repeated vacuum cycling. This technology enables exciting new opportunities for liquid cell studies, providing a reliable platform for high resolution transmission electron microscope imaging and spectral mapping. The presence of water was confirmed using electron energy loss spectroscopy (EELS) via the detection of the oxygen K-edge and measuring the thickness of full and empty cells. We demonstrate the imaging capabilities of these liquid cells by tracking the dynamic motion and interactions of small metal nanoparticles with diameters of 0.5-5 nm. We further present an order of magnitude improvement in the analytical capabilities compared to previous liquid cell data, with 1 nm spatial resolution elemental mapping achievable for liquid encapsulated bimetallic nanoparticles using energy dispersive X-ray spectroscopy (EDXS).

cond-mat.mtrl-sci↗

arXiv2017

Observing imperfection in atomic interfaces for van der Waals heterostructures

Vertically stacked van der Waals heterostructures are a lucrative platform for exploring the rich electronic and optoelectronic phenomena in two-dimensional materials. Their performance will be strongly affected by impurities and defects at the interfaces. Here we present the first systematic study of interfaces in van der Waals heterostructure using cross sectional scanning transmission electron microscope (STEM) imaging. By measuring interlayer separations and comparing these to density functional theory (DFT) calculations we find that pristine interfaces exist between hBN and MoS2 or WS2 for stacks prepared by mechanical exfoliation in air. However, for two technologically important transition metal dichalcogenide (TMDC) systems, MoSe2 and WSe2, our measurement of interlayer separations provide the first evidence for impurity species being trapped at buried interfaces with hBN: interfaces which are flat at the nanometer length scale. While decreasing the thickness of encapsulated WSe2 from bulk to monolayer we see a systematic increase in the interlayer separation. We attribute these differences to the thinnest TMDC flakes being flexible and hence able to deform mechanically around a sparse population of protruding interfacial impurities. We show that the air sensitive two dimensional (2D) crystal NbSe2 can be fabricated into heterostructures with pristine interfaces by processing in an inert-gas environment. Finally we find that adopting glove-box transfer significantly improves the quality of interfaces for WSe2 compared to processing in air.

cond-mat.mes-hall↗

arXiv2016

Phase segregation facilitates exfoliation of franckeite crystals to a single unit cell thickness

Weak interlayer van der Waals interactions in bulk crystals facilitate their mechanical exfoliation to monolayer and few-layer two-dimensional (2D) materials, which exhibit striking physical phenomena absent in their bulk form. Here we study a 2D form of a mineral franckeite and show that phase segregation into discrete layers at the sub-nanometre scale facilitates its layered structure and basal cleavage. This behaviour is likely to be common in a wider family of complex crystals and could be exploited for a single-step synthesis of van der Waals heterostructures, as an alternative to stacking of 2D materials. Mechanical exfoliation allowed us to produce crystals down to a single unit cell thickness and rationalise its basal cleavage by atomic-resolution scanning transmission electron microscopy (STEM). We demonstrate p-type electrical conductivity and remarkable electrochemical properties in exfoliated crystals, which shows promise for energy storage applications.

cond-mat.mes-hall↗

arXiv2015

An in- and ex-situ TEM study into the oxidisation of titanium (IV) sulphide

The degradation of liquid dispersed titanium (IV) sulphide (TiS$_2$) is studied from the point of view of oxidisation. TiS$_2$ is a layered two-dimensional nanomaterial, with potential for energy storage applications. However, flakes in dispersion were observed to degrade. We examined two oxidisation routes: deionised water at room temperature and oxygen gas within the temperature range 150-350°C. Water was seen to slowly oxidise flakes inwards from the edge, forming an amorphous oxide, a result comparable to the state of flakes which degraded within the original dispersion. Oxygen gas was seen to rapidly oxidise entire flakes to a polycrystalline oxide, when heated 275 °C and above. Degradation was studied with scanning transmission electron microscopy (STEM), energy dispersed x-ray spectroscopy (EDX) and electron energy-loss spectroscopy (EELS). Density Functional Theory calculations have shown oxidisation by both water and gas molecules to be thermodynamically favourable.

cond-mat.mtrl-sci↗