arXiv subjects

Sarveshwar Sharma

Publications and source records attributed to Sarveshwar Sharma.

31 records · Page 2Linked to original sources

arXiv2023

Flux and energy asymmetry in a low pressure capacitively coupled plasma discharge excited by sawtooth-like waveform -- a harmonic study

Control over plasma asymmetry in a low-pressure capacitively coupled plasma (CCP) discharges is vital for many plasma processing applications. In this article, using the particle-in-cell simulation technique, we investigated the asymmetry generation by a temporally asymmetric waveform (sawtooth-like) in collisionless CCP discharge. A study by varying the number of harmonics (N) contained in the sawtooth waveform is performed. The simulation resultspredict a non-linear increase in the plasma density and ion flux with N i.e., it first decreases, reaching a minimum value for a critical value of N, and then increases almost linearly with afurther rise in N. The ionization asymmetry increases with N, and higher harmonics on the instantaneous sheath position are observed for higher values of N. These higher harmonics generate multiple ionization beams that are generated near the expanding sheath edge and are responsible for an enhanced plasma density for higher values of N. The ion energy distribution function (IEDF) depicts a bi-modal shape for different values of N. A strong DC self-bias is observed on the powered electrode, and its value with respect to the plasma potential decreases with an increase in N due to which corresponding ion energy on the powered electrode decreases. The simulation results conclude that by changing the number of harmonics of a sawtooth-like in collisionless CCP discharges, the ion flux asymmetry is not generated, whereas sheath symmetry could be significantly affected and therefore a systematic variation in the ion energy asymmetry is observed. Due to an increase in the higher harmonic contents in the sawtooth waveform with N, a transition from broad bi-modal to narrow-shaped IEDFs is found.

physics.plasm-ph↗

arXiv2022

Investigating the effects of electron bounce-cyclotron resonance on plasma dynamics in capacitive discharges operated in the presence of a weak transverse magnetic field

Recently, S Patil et al. have reported the existence of an enhanced operating regime when a low-pressure (5 mTorr) capacitively coupled discharge (CCP) is driven by a very high radio-frequency (60 MHz) source in the presence of a weak external magnetic field applied parallel to its electrodes. Their Particle-in-Cell (PIC) simulations show, that a significantly higher bulk plasma density and ion flux can be achieved at the electrode when the electron cyclotron frequency equals half of the applied RF frequency for a given fixed voltage. In the present work we take a detailed look at this phenomenon and further delineate the effect of this "electron bounce cyclotron resonance (EBCR)" on the electron and ion dynamics of the system. We find that the ionization collision rate and stochastic heating is maximum under resonance condition. The electron energy distribution function also indicates that the population of tail end electrons is highest for the case where EBCR is maximum. Formation of electric field transients in the bulk plasma region are also seen at lower values of applied magnetic field. Finally, we demonstrate that the EBCR induced effect is a low pressure phenomenon and weakens as the neutral gas pressure increases. The potential utility of this effect to advance the operational performance of CCP devices for industrial purposes is discussed.

physics.plasm-ph↗

arXiv2021

Effect of radiation-reaction on charged particle dynamics in a focused electromagnetic wave

Effect of radiation-reaction force on the dynamics of a charged particle in an intense focused light wave is investigated using the physically appealing Hartemann-Luhmann equation of motion. It is found that, irrespective of the choice of initial conditions, radiation reaction force causes the charge particle to cross the focal region, thereby enhancing the forward energy gained by the particle from the intense light wave. This result is in sharp contrast to the well known result, derived in the absence of radiation reaction forces, where for certain initial conditions the particle reflects from the high intensity region of the focused light wave, thereby losing forward energy. These results, which are of relevance to the present day direct laser acceleration schemes of charge particle, also agrees with that obtained using the well known Landau-Lifshitz equation of motion.

physics.plasm-ph↗

arXiv2021

Plasma asymmetry, electron and ion energy distribution function in capacitive discharges excited by tailored waveforms

Using particle-in-cell simulation technique, we investigate the plasma and ionization asymmetry, electron and ion energy distribution function in capacitive discharges excited by tailored waveforms. At a base frequency of 13.56 MHz, three different waveforms namely, sinusoidal, saw-tooth, and square are applied for a constant current density of 50 A/m2 and 5 mTorr argon gas pressure. The simulation results show that the square waveform produces the highest plasma density in the discharge, whereas maximum asymmetry is observed for plasma excited by sawtooth like waveform. Both square and sawtooth waveforms generate multiple beams of high-energy electrons from near to the expanding phase of the sheath edge followed by the high-frequency modulations up to 100 MHz on the instantaneous sheath position. The electron energy distribution function depicts 3 electron temperature and highly elevated tail-end electrons for the square waveform in comparison to the sinusoidal and sawtooth waveform. The ion energy distribution function is bimodal at both powered and grounded electrodes with a large asymmetry and narrow type distribution in the case of sawtooth like waveform. These results suggest that the choice of the waveform is highly critical for achieving maximum asymmetry and plasma density simultaneously in the discharge.

physics.plasm-ph↗

arXiv2021

Ion energy distribution function in very high frequency capacitive discharges excited by sawtooth waveform

Tailoring ion energy distribution function (IEDF) is vital for advanced plasma processing applications. Capacitively coupled plasma (CCP) discharges excited using non-sinusoidal waveform have shown its capability to control IEDF through generation of DC self-bias. In this paper, we performed a particle-in-cell simulation study to investigate the IEDF in a symmetric capacitive discharge excited by saw-tooth like current waveform at a very high frequency (VHF). At a constant driving frequency of 27.12 MHz, the simulation results predict that the ion energy symmetry scales with the discharge current amplitude and the IEDF turn into a bi-modal distribution at higher current density amplitude. Further studies at a constant current density and varying the fundamental excitation frequency, shows that the ion energy asymmetry is greatly reduced with a reduction in the driving frequency. Increase in the plasma asymmetry and significant DC self-bias at lower driving frequency is observed to be one of the principal factors responsible for the observed asymmetry in the ion energy peaks. An investigation of DC self-bias and plasma potential confirm that the powered electrode energy peak corresponds to the DC self-bias with respect to the plasma potential, and the grounded electrode peak corresponds to the plasma potential. These results suggest that although lower frequency is good for generating the asymmetry and DC self-bias in the discharge, but a narrow low energy IEDF is only possible in very high frequency driven CCP systems.

physics.plasm-ph↗

arXiv2021

Dynamic Mode Decomposition of inertial particle caustics in Taylor-Green flow

Inertial particles advected by a background flow can show complex structures. We consider inertial particles in a 2D Taylor-Green (TG) flow and characterize particle dynamics as a function of the particle's Stokes number using dynamic mode decomposition (DMD) method from particle image velocimetry (PIV) like-data. We observe the formation of caustic structures and analyze them using DMD to (a) determine the Stokes number of the particles, and (b) estimate the particle Stokes number composition. Our analysis in this idealized flow will provide useful insight to analyze inertial particles in more complex or turbulent flows. We propose that the DMD technique can be used to perform a similar analysis on an experimental system.

physics.flu-dyn↗

arXiv2020

An enhanced operating regime for high frequency capacitive discharges

We report the existence of an enhanced operating regime for a high-frequency, low-pressure capacitively coupled plasma (CCP) discharge in the presence of a weak magnetic field applied parallel to the electrodes. Our PIC-MCC simulations show that the plasma density and ion flux values exhibit a sharp peak when the electron cyclotron frequency equals half of the applied RF frequency. The physical mechanism responsible for this behaviour is traced to a synchronization between the oscillatory motion of the electrode sheath edge and the motion of a set of electrons reflected by this sheath. These electrons gain a substantial amount of energy that causes a concomitant higher ionisation leading to a peak in the ion flux. Our theoretical findings should be easy to verify experimentally in present day CCP devices and could provide useful guidelines for enhancing the operational performance of CCP devices in industrial applications.

physics.plasm-ph↗

arXiv2020

High frequency sheath modulation and higher harmonic generation in a low pressure very high frequency capacitively coupled plasma excited by sawtooth waveform

A particle-in-cell (PIC) simulation study is performed to investigate the discharge asymmetry, higher harmonic generations and electron heating mechanism in a low pressure very high frequency capacitively coupled plasma (CCP) excited by a saw-tooth like current waveform. Two current densities, 50 A/m2 and 100 A/m2 are chosen for a constant gas pressure of 5 mTorr in argon plasma. The driving frequency is varied from 13.56 MHz to 54.24 MHz. At a lower driving frequency, high frequency modulations on the instantaneous sheath edge position at the grounded electrode are observed. These high frequency oscillations create multiple ionization beam like structures near to the sheath edge that drives the plasma density in the discharge and responsible for discharge/ionization asymmetry at lower driving frequency. Conversely, the electrode voltage shows higher harmonics generation at higher driving frequencies and corresponding electric field transients are observed into the bulk plasma. At lower driving frequency, the electron heating is maximum near to the sheath edge followed by electron cooling within plasma bulk, however, alternate heating and cooling i.e. burst like structures are obtained at higher driving frequencies. These results suggest that electron heating in these discharges will not be described accurately by simple analytical models.

physics.plasm-ph↗

arXiv2020

Driving frequency effect on discharge parameters and higher harmonic generation in capacitive discharges at constant power densities

Very high frequency (VHF) driven capacitive discharges are now being increasingly adopted for plasma-based materials processing due to their high processing rates and lower substrate damage. Past studies related to complex plasma dynamics and higher harmonics generation in such systems were limited to constant voltage/current conditions, whereas, industrial systems are mostly driven by constant power density sources. In the present study, using particle-in-cell (PIC) simulation, we explore the dynamics of collisionless symmetric capacitive discharges that is operated at constant power densities. Our focus is on the effect of the driving frequency on the discharge parameters like the electron density/temperature, the electron energy distribution function (EEDF), the ion energy distribution function (IEDF), and the generation of higher harmonics in the device. The simulations are performed for a driving frequency from 27.12-100 MHz in argon plasma at a gas pressure of 1 Pa and for two values of the power density, namely, 2 kW/m3 and 20 kW/m3. It is observed that the required discharge voltage for maintaining constant power density decreases and discharge current increases with an increase in the driving frequency. A transition frequency is observed at both power densities. The density decreases (electron temperature increases) before the transition frequency and the trend is reversed after crossing the transition frequency. The EEDF shows an enhancement in the population of the mid-energy range of electrons as the driving frequency increases up to the transition frequency thereby changing the shape of EEDF from bi-Maxwellian to nearly Maxwellian, and then transforms into a nearly bi-Maxwellian at higher driving frequencies.

physics.plasm-ph↗

arXiv2019

Electric field non-linearity in very high frequency capacitive discharges at constant electron plasma frequency

A self-consistent particle-in-cell simulation study is performed to investigate the effect of driving frequency on the electric field non-linearity, electron heating mechanism and electron energy distribution function (EEDF) in a low pressure symmetric capacitively coupled plasma (CCP) discharge at a constant electron plasma frequency. The driving frequency is varied from 27.12 MHz to 100 MHz for a discharge gap of 3.2 cm in argon at a gas pressure of 1 Pa. The simulation results provide insight of higher harmonic generations in a CCP system for a constant electron response time. The spatio-temporal evolution and spatial time averaged electron heating is presented for different driving frequencies. The simulation results predict that the electric field non-linearity increases with a rise in driving frequency along with a concurrent increase in higher harmonic contents. In addition to the electron heating and cooling near to the sheath edge a positive is observed in to the bulk plasma at higher driving frequencies. The EEDF illustrate enhancement in the population of mid-energy range electrons as driving frequency increases thereby changing the shape of EEDF from bi-Maxwellian to nearly Maxwellian. For the constant ion flux on the electrode surface, a decrease in the ion energy by more than half is observed with an increase in driving frequency.

physics.plasm-ph↗

arXiv2019

Electric field filamentation and higher harmonic generation in a very high frequency capacitive discharges

The effects of the discharge voltage on the formation and nature of electric field transients in a symmetric, collisionless, very high frequency, capacitively coupled plasma are studied using a self-consistent particle-in-cell (PIC) simulation code. At a driving frequency of 60 MHz and 5 mTorr of argon gas pressure, the discharge voltage is varied from 10V to 150 V for a fixed discharge gap. It is observed that an increase in the discharge voltage causes filamentation in the electric field transients and to create multiple higher harmonics in the bulk plasma. Correspondingly, higher harmonics, up to 7th harmonic, in the discharge current are also observed. The power in the higher harmonics increases with a rise in the discharge voltage. The plasma density continues to increase with the discharge voltage but in a non-linear manner, whereas, the bulk electron temperature decreases. Meanwhile, the electron energy distribution function (EEDF) evolves from a Maxwellian at lower discharge voltages to a bi-Maxwellian at higher discharge voltages.

physics.plasm-ph↗

arXiv2018

Spatial symmetry breaking in single-frequency CCP discharge with transverse magnetic field

An independent control of the flux and energy of ions impacting on an object immersed in a plasma is often desirable for many industrial processes such as microelectronics manufacturing. We demonstrate that a simultaneous control of these quantities is possible by a suitable choice of a static magnetic field applied parallel to the plane electrodes in a standard single frequency capacitively coupled plasma device. Our particle-in-cell simulations show a 60% reduction in the sheath width (that improves control of ion energy) and a four fold increase in the ion flux at the electrode as a consequence of the altered ion and electron dynamics due to the ambient magnetic field. A detailed analysis of the particle dynamics is presented and the optimized operating parameters of the device are discussed. The present technique offers a simple and attractive alternative to conventional dual frequency based devices that often suffer from undesirable limitations arising from frequency coupling and electromagnetic effects.

physics.plasm-ph↗

arXiv2018

Plasma density and ion energy control via driving frequency and applied voltage in a low pressure capacitively coupled plasma discharge

The dynamical characteristics of a single frequency low pressure capacitively coupled plasma (CCP) device under varying applied RF voltages and driving frequencies are studied using particle-in-cell/Monte Carlo collision simulations. An operational regime is identified where for a given voltage the plasma density is found to remain constant over a range of driving frequencies and to then increase rapidly as a function of the driving frequency. The threshold frequency for this mode transition as well as the value of the constant density is found to increase with an increase in the applied voltage. Over the constant density range, for a given voltage, the sheath width is seen to increase as a function of the increasing driving frequency, thereby changing the ion energy without affecting the ion density. Our parametric study thus indicates that the twin knobs of the applied voltage and driving frequency offer a means of independently controlling the density and the ion energy in a low pressure CCP device that may be usefully exploited for plasma processing applications.

physics.plasm-ph↗