arXiv subjects

Satoshi Eguchi

Publications and source records attributed to Satoshi Eguchi.

At least 19 recordsLinked to original sources

arXiv2026

Chemical enrichment of the Perseus cluster core seen by XRISM/Resolve

The intracluster medium (ICM) is rich in chemical elements, produced by core-collapse (SNcc) and Type Ia supernovae (SNIa) over the last $\sim$12 Gyr. Whereas cluster outskirts are uniformly enriched with Fe at $\sim$0.3 solar - strongly suggesting that the gas had been pre-enriched during or before the assembly of galaxies into clusters, the Fe abundance is known to centrally increase in the core of relaxed clusters. The origin of these central Fe peaks however, as well as the apparent presence of mysterious drops previously reported in the very centre of a number of systems, remain to be clarified. In this paper, we address these two questions by measuring the spatial distribution of Fe and its relative Si/Fe, S/Fe, Ar/Fe, Ca/Fe, Cr/Fe, Mn/Fe, and Ni/Fe ratios in the X-ray bright, nearby Perseus cluster. We take advantage of the unprecedented spectral resolution ($\sim$5 eV) offered by the Resolve microcalorimeter on board XRISM, which observed four distinct pointings of Perseus out to $\sim$250 kpc ($\sim$0.2$r_{500}$) during its Performance Verification phase. Although the presence of an X-ray bright AGN challenges a precise quantification of absolute abundances in the very core, our baseline analysis rules out a strong drop with $>$2$\sigma$ confidence, at variance with previous CCD measurements. In addition, we find a remarkable spatial uniformity of X/Fe ratios, supporting the idea of negligible late SNIa enrichment from the brightest cluster galaxy NGC 1275. We also compare the overall chemical composition of the Perseus ICM with SNcc and SNIa nucleosynthesis yield models, finding that the co-existence of two separate SNIa enrichment channels is not needed to reproduce the ICM ratios satisfactorily.

astro-ph.GA↗

arXiv2026

A Fast, Hot Wind from a Nuclear Starburst

Galaxies with intense star formation often host multiphase, galaxy-scale winds powered by supernovae and fast stellar winds. These are strong enough to disrupt the star-forming interstellar medium, and they chemically enrich the surrounding circumgalactic medium. However, their launching mechanism remains unknown. Here we show that thermal gas pressure is sufficient to drive the multiphase wind in the prototypical starburst galaxy M82. Using a high energy-resolution ($\Delta E = 4.5$ eV) XRISM Resolve spectrum, including detections of FeXXV 6.7 keV, ArXVII 3.1 keV, and SXVI 2.6 keV, we measure the temperature ($T = 2.3^{+0.5}_{-0.2} \times 10^7$ K) and mass ($M \approx 6 \pm 2 \times 10^5$ M$_\odot$) of the hot gas in the starburst and provide the first direct measurement of its line-of-sight velocity dispersion ($\sigma = 595^{+464}_{-128}$ km s$^{-1}$). These values are consistent with a freely-expanding wind exceeding the galactic escape velocity. The size of the FeXXV-emitting region suggests a hot gas outflow rate of $\dot{M} \approx 4$ M$_\odot$ yr$^{-1}$, carrying a total energy of $\dot{E} \approx 2 \times 10^{42}$ erg s$^{-1}$. This is sufficient to drive the molecular, atomic, and ionized outflows while transporting up to $\approx 2$ M$_\odot$ yr$^{-1}$ of hot gas to the intergalactic medium. The estimated supernova rate implies that $\approx$ 60% of the supernova energy must be thermalized in hot gas. Our results suggest that additional driving mechanisms, such as cosmic-ray pressure, are not required to launch the wind.

astro-ph.GA↗

arXiv2026

High Spectral Resolution X-ray Observations of the Evolved Supermassive Stellar Binary System $\eta$ Carinae - Iron K$\alpha$ Band Profile Revealed with XRISM

The supermassive binary system, $\eta$ Carinae, is experiencing enormous wind-driven mass loss at a rate unparalleled in the rest of the Galaxy. Their wind-wind collision (WWC) continuously produces shock heated, X-ray emitting plasmas. The XRISM X-ray observatory observed the system in 2023 and 2024 when the X-ray emission began to increase toward periastron passage in 2025. This manuscript reports unprecedentedly high-resolution X-ray spectra in the iron K$\alpha$ band between 6.2 and 7.1 keV, obtained with the Resolve X-ray microcalorimeter. The hydrogen-like (Ly$\alpha$) and helium-like (He$\alpha$) lines reveal three velocity components. Two of them are broadened with maximum velocities of 2000-3000 km/s, likely originating from the post-shock companion wind. The other is relatively narrow, with a Gaussian broadening of only ~290 km/s in 1 sigma, which may originate from the post-shock companion wind at the WWC stagnation point or penetrating the primary wind. The iron fluorescent lines exhibit a moderate blueshift and broadening with velocities at 100-200 km/s, consistent with the primary wind's velocity field. The spectra also confirm a Compton shoulder of the He$\alpha$ line complex for the first time. Both fluorescing and scattering spectral profiles indicate that the binary system is seen from the companion side during these observations. The flux ratio of the Compton scattering emission to the fluorescent line suggests substantial hydrogen depletion of the primary wind, expected from CNO-cycled hydrogen nuclear fusion gas.

astro-ph.HE↗

arXiv2025

XRISM constraints on unidentified X-ray emission lines, including the 3.5 keV line, in the stacked spectrum of ten galaxy clusters

We stack 3.75 Megaseconds of early XRISM Resolve observations of ten galaxy clusters to search for unidentified spectral lines in the $E=$ 2.5-15 keV band (rest frame), including the $E=3.5$ keV line reported in earlier, low spectral resolution studies of cluster samples. Such an emission line may originate from the decay of the sterile neutrino, a warm dark matter (DM) candidate. No unidentified lines are detected in our stacked cluster spectrum, with the $3\sigma$ upper limit on the $m_{\rm s}\sim$ 7.1 keV DM particle decay rate (which corresponds to a $E=3.55$ keV emission line) of $\Gamma \sim 1.0 \times 10^{-27}$ s$^{-1}$. This upper limit is 3-4 times lower than the one derived by Hitomi Collaboration et al. (2017) from the Perseus observation, but still 5 times higher than the XMM-Newton detection reported by Bulbul et al. (2014) in the stacked cluster sample. XRISM Resolve, with its high spectral resolution but a small field of view, may reach the sensitivity needed to test the XMM-Newton cluster sample detection by combining several years worth of future cluster observations.

astro-ph.HE↗

arXiv2025

Comparing XRISM cluster velocity dispersions with predictions from cosmological simulations: are feedback models too ejective?

The dynamics of the intra-cluster medium (ICM), the hot plasma that fills galaxy clusters, are shaped by gravity-driven cluster mergers and feedback from supermassive black holes (SMBH) in the cluster cores. XRISM measurements of ICM velocities in several clusters offer insights into these processes. We compare XRISM measurements for nine galaxy clusters (Virgo, Perseus, Centaurus, Hydra A, PKS\,0745--19, A2029, Coma, A2319, Ophiuchus) with predictions from three state-of-the-art cosmological simulation suites, TNG-Cluster, The Three Hundred Project GADGET-X, and GIZMO-SIMBA, that employ different models of feedback. In cool cores, XRISM reveals systematically lower velocity dispersions than the simulations predict, with all ten measurements below the median simulated values by a factor $1.5-1.7$ on average and all falling within the bottom $10\%$ of the predicted distributions. The observed kinetic-to-total pressure ratio is also lower, with a median value of $2.2\%$, compared to the predicted $5.0-6.5\%$ for the three simulations. Outside the cool cores and in non-cool-core clusters, simulations show better agreement with XRISM measurements, except for the outskirts of the relaxed, cool-core cluster A2029, which exhibits an exceptionally low kinetic pressure support ($<1\%$), with none of the simulated systems in either of the three suites reaching such low levels. The non-cool-core Coma and A2319 exhibit dispersions at the lower end but within the simulated spread. Our comparison suggests that the three numerical models may overestimate the kinetic effects of SMBH feedback in cluster cores. Additional XRISM observations of non-cool-core clusters will clarify if there is a systematic tension in the gravity-dominated regime as well.

astro-ph.GA↗

arXiv2025

Stratified wind from a super-Eddington X-ray binary is slower than expected

Accretion discs in strong gravity ubiquitously produce winds, seen as blueshifted absorption lines in the X-ray band of both stellar mass X-ray binaries (black holes and neutron stars), and supermassive black holes. Some of the most powerful winds (termed Eddington winds) are expected to arise from systems where radiation pressure is sufficient to unbind material from the inner disc ($L\gtrsim L_{\rm Edd}$). These winds should be extremely fast and carry a large amount of kinetic power, which, when associated with supermassive black holes, would make them a prime contender for the feedback mechanism linking the growth of those black holes with their host galaxies. Here we show the XRISM Resolve spectrum of the Galactic neutron star X-ray binary, GX 13+1, which reveals one of the densest winds ever seen in absorption lines. This Compton-thick wind significantly attenuates the flux, making it appear faint, although it is intrinsically more luminous than usual ($L\gtrsim L_{\rm Edd}$). However, the wind is extremely slow, more consistent with the predictions of thermal-radiative winds launched by X-ray irradiation of the outer disc, than with the expected Eddington wind driven by radiation pressure from the inner disc. This puts new constraints on the origin of winds from bright accretion flows in binaries, but also highlights the very different origin required for the ultrafast ($v\sim 0.3c$) winds seen in recent Resolve observations of a supermassive black hole at similarly high Eddington ratio.

astro-ph.HE↗

arXiv2025

Disentangling Multiple Gas Kinematic Drivers in the Perseus Galaxy Cluster

Galaxy clusters, the Universe's largest halo structures, are filled with 10-100 million degree X-ray-emitting gas. Their evolution is shaped by energetic processes such as feedback from supermassive black holes (SMBHs) and mergers with other cosmic structures. The imprints of these processes on gas kinematic properties remain largely unknown, restricting our understanding of gas thermodynamics and energy conversion within clusters. High-resolution spectral mapping across a broad spatial-scale range provides a promising solution to this challenge, enabled by the recent launch of the XRISM X-ray Observatory. Here, we present the kinematic measurements of the X-ray-brightest Perseus cluster with XRISM, radially covering the extent of its cool core. We find direct evidence for the presence of at least two dominant drivers of gas motions operating on distinct physical scales: a small-scale driver in the inner ~60 kpc, likely associated with the SMBH feedback; and a large-scale driver in the outer core, powered by mergers. The inner driver sustains a heating rate at least an order of magnitude higher than the outer one. This finding suggests that, during the active phase, the SMBH feedback generates turbulence, which, if fully dissipated into heat, could play a significant role in offsetting radiative cooling losses in the Perseus core. Our study underscores the necessity of kinematic mapping observations of extended sources for robust conclusions on the properties of the velocity field and their role in the assembly and evolution of massive halos. It further offers a kinematic diagnostic for theoretical models of SMBH feedback.

astro-ph.HE↗

arXiv2025

XRISM/Resolve View of Abell 2319: Turbulence, Sloshing, and ICM Dynamics

We present results from XRISM/Resolve observations of the core of the galaxy cluster Abell 2319, focusing on its kinematic properties. The intracluster medium (ICM) exhibits temperatures of approximately 8 keV across the core, with a prominent cold front and a high-temperature region ($\sim$11 keV) in the northwest. The average gas velocity in the 3 arcmin $\times$ 4 arcmin region around the brightest cluster galaxy (BCG) covered by two Resolve pointings is consistent with that of the BCG to within 40 km s$^{-1}$ and we found modest average velocity dispersion of 230-250 km s$^{-1}$. On the other hand, spatially-resolved spectroscopy reveals interesting variations. A blueshift of up to $\sim$230 km s$^{-1}$ is observed around the east edge of the cold front, where the gas with the lowest specific entropy is found. The region further south inside the cold front shows only a small velocity difference from the BCG; however, its velocity dispersion is enhanced to 400 km s$^{-1}$, implying the development of turbulence. These characteristics indicate that we are observing sloshing motion with some inclination angle following BCG and that gas phases with different specific entropy participate in sloshing with their own velocities, as expected from simulations. No significant evidence for a high-redshift ICM component associated with the subcluster Abell 2319B was found in the region covered by the current Resolve pointings. These results highlight the importance of sloshing and turbulence in shaping the internal structure of Abell 2319. Further deep observations are necessary to better understand the mixing and turbulent processes within the cluster.

astro-ph.HE↗

arXiv2025

XRISM Pre-Pipeline and Singularity: Container-Based Data Processing for the X-Ray Imaging and Spectroscopy Mission and High-Performance Computing

The X-Ray Imaging and Spectroscopy Mission (XRISM) is the seventh Japanese X-ray observatory whose development and operation are in collaboration with universities and research institutes in Japan, the United States, and Europe, including JAXA, NASA, and ESA. The telemetry data downlinked from the satellite are reduced to scientific products using pre-pipeline (PPL) and pipeline (PL) software running on standard Linux virtual machines (VMs) for the JAXA and NASA sides, respectively. OBSIDs identified the observations, and we had 80 and 161 OBSIDs to be reprocessed at the end of the commissioning period and performance verification and calibration period, respectively. The combination of the containerized PPL utilizing Singularity of a container platform running on the JAXA's "TOKI-RURI" high-performance computing (HPC) system and working disk images formatted to ext3 accomplished a 33x speedup in PPL tasks over our regular VM. Herein, we briefly describe the data processing in XRISM and our porting strategies for PPL in the HPC environment.

astro-ph.IM↗

arXiv2025

Verification of the Timing System for the X-ray Imaging and Spectroscopy Mission in the GPS Unsynchronized Mode

We report the results from the ground and on-orbit verifications of the XRISM timing system when the satellite clock is not synchronized to the GPS time. In this case, the time is determined by a free-run quartz oscillator of the clock, whose frequency changes depending on its temperature. In the thermal vacuum test performed in 2022, we obtained the GPS unsynchronized mode data and the temperature-versus-clock frequency trend. Comparing the time values calculated from the data and the true GPS times when the data were obtained, we confirmed that the requirement (within a 350 $\mu$s error in the absolute time, accounting for both the spacecraft bus system and the ground system) was satisfied in the temperature conditions of the thermal vacuum test. We also simulated the variation of the timing accuracy in the on-orbit temperature conditions using the Hitomi on-orbit temperature data and found that the error remained within the requirement over $\sim 3 \times 10^{5}$ s. The on-orbit tests were conducted in 2023 September and October as part of the bus system checkout. The temperature versus clock frequency trend remained unchanged from that obtained in the thermal vacuum test and the observed time drift was consistent with that expected from the trend.

astro-ph.IM↗

arXiv2025

Constraining gas motion and non-thermal pressure beyond the core of the Abell 2029 galaxy cluster with XRISM

We report a detailed spectroscopic study of the gas dynamics and hydrostatic mass bias of the galaxy cluster Abell 2029, utilizing high-resolution observations from XRISM Resolve. Abell 2029, known for its cool core and relaxed X-ray morphology, provides an excellent opportunity to investigate the influence of gas motions beyond the central region. Expanding upon prior studies that revealed low turbulence and bulk motions within the core, our analysis covers regions out to the scale radius $R_{2500}$ (670~kpc) based on three radial pointings extending from the cluster center toward the northern side. We obtain accurate measurements of bulk and turbulent velocities along the line of sight. The results indicate that non-thermal pressure accounts for no more than 2% of the total pressure at all radii, with a gradual decrease outward. The observed radial trend differs from many numerical simulations, which often predict an increase in non-thermal pressure fraction at larger radii. These findings suggest that deviations from hydrostatic equilibrium are small, leading to a hydrostatic mass bias of around 2% across the observed area.

astro-ph.CO↗

arXiv2025

XRISM forecast for the Coma cluster: stormy, with a steep power spectrum

The XRISM Resolve microcalorimeter array measured the velocities of hot intracluster gas at two positions in the Coma galaxy cluster: 3'x3' squares at the center and at 6' (170 kpc) to the south. We find the line-of-sight velocity dispersions in those regions to be sigma_z=208+-12 km/s and 202+-24 km/s, respectively. The central value corresponds to a 3D Mach number of M=0.24+-0.015 and the ratio of the kinetic pressure of small-scale motions to thermal pressure in the intracluster plasma of only 3.1+-0.4%, at the lower end of predictions from cosmological simulations for merging clusters like Coma, and similar to that observed in the cool core of the relaxed cluster A2029. Meanwhile, the gas in both regions exhibits high line-of-sight velocity differences from the mean velocity of the cluster galaxies, Delta v_z=450+-15 km/s and 730+-30 km/s, respectively. A small contribution from an additional gas velocity component, consistent with the cluster optical mean, is detected along a sightline near the cluster center. The combination of the observed velocity dispersions and bulk velocities is not described by a Kolmogorov velocity power spectrum of steady-state turbulence; instead, the data imply a much steeper effective slope (i.e., relatively more power at larger linear scales). This may indicate either a very large dissipation scale resulting in the suppression of small-scale motions, or a transient dynamic state of the cluster, where large-scale gas flows generated by an ongoing merger have not yet cascaded down to small scales.

astro-ph.HE↗

arXiv2025

Development of the Timing System for the X-Ray Imaging and Spectroscopy Mission

This paper describes the development, design, ground verification, and in-orbit verification, performance measurement, and calibration of the timing system for the X-Ray Imaging and Spectroscopy Mission (XRISM). The scientific goals of the mission require an absolute timing accuracy of 1.0~ms. All components of the timing system were designed and verified to be within the timing error budgets, which were assigned by component to meet the requirements. After the launch of XRISM, the timing capability of the ground-tuned timing system was verified using the millisecond pulsar PSR~B1937+21 during the commissioning period, and the timing jitter of the bus and the ground component were found to be below $15~\mu$s compared to the NICER (Neutron star Interior Composition ExploreR) profile. During the performance verification and calibration period, simultaneous observations of the Crab pulsar by XRISM, NuSTAR (Nuclear Spectroscopic Telescope Array), and NICER were made to measure the absolute timing offset of the system, showing that the arrival time of the main pulse with XRISM was aligned with that of NICER and NuSTAR to within $200~\mu$s. In conclusion, the absolute timing accuracy of the bus and the ground component of the XRISM timing system meets the timing error budget of $500~\mu$s.

astro-ph.IM↗

arXiv2024

Container-Based Pre-Pipeline Data Processing on HPC for XRISM

The X-Ray Imaging and Spectroscopy Mission (XRISM) is the 7th Japanese X-ray observatory, whose development and operation are in collaboration with universities and research institutes in Japan, U.S., and Europe, including JAXA, NASA, and ESA. The telemetry data downlinked from the satellite are reduced to scientific products by the pre-pipeline (PPL) and pipeline (PL) software running on standard Linux virtual machines on the JAXA and NASA sides, respectively. We ported the PPL to the JAXA "TOKI-RURI" high-performance computing (HPC) system capable of completing $\simeq 160$ PPL processes within 24 hours by utilizing the container platform of Singularity and its "--bind" option. In this paper, we briefly show the data processing in XRISM and present our porting strategy of PPL to the HPC environment in detail.

astro-ph.IM↗

arXiv2021

Detailed Design of the Science Operations for the XRISM mission

XRISM is an X-ray astronomical mission by the JAXA, NASA, ESA and other international participants, that is planned for launch in 2022 (Japanese fiscal year), to quickly restore high-resolution X-ray spectroscopy of astrophysical objects. To enhance the scientific outputs of the mission, the Science Operations Team (SOT) is structured independently from the instrument teams and the Mission Operations Team. The responsibilities of the SOT are divided into four categories: 1) guest observer program and data distributions, 2) distribution of analysis software and the calibration database, 3) guest observer support activities, and 4) performance verification and optimization activities. As the first step, lessons on the science operations learned from past Japanese X-ray missions are reviewed, and 15 kinds of lessons are identified. Among them, a) the importance of early preparation of the operations from the ground stage, b) construction of an independent team for science operations separate from the instrument development, and c) operations with well-defined duties by appointed members are recognized as key lessons. Then, the team structure and the task division between the mission and science operations are defined; the tasks are shared among Japan, US, and Europe and are performed by three centers, the SOC, SDC, and ESAC, respectively. The SOC is designed to perform tasks close to the spacecraft operations, such as spacecraft planning, quick-look health checks, pre-pipeline processing, etc., and the SDC covers tasks regarding data calibration processing, maintenance of analysis tools, etc. The data-archive and user-support activities are covered both by the SOC and SDC. Finally, the science-operations tasks and tools are defined and prepared before launch.

astro-ph.IM↗

arXiv2020

Current status of space gravitational wave antenna DECIGO and B-DECIGO

Deci-hertz Interferometer Gravitational Wave Observatory (DECIGO) is the future Japanese space mission with a frequency band of 0.1 Hz to 10 Hz. DECIGO aims at the detection of primordial gravitational waves, which could be produced during the inflationary period right after the birth of the universe. There are many other scientific objectives of DECIGO, including the direct measurement of the acceleration of the expansion of the universe, and reliable and accurate predictions of the timing and locations of neutron star/black hole binary coalescences. DECIGO consists of four clusters of observatories placed in the heliocentric orbit. Each cluster consists of three spacecraft, which form three Fabry-Perot Michelson interferometers with an arm length of 1,000 km. Three clusters of DECIGO will be placed far from each other, and the fourth cluster will be placed in the same position as one of the three clusters to obtain the correlation signals for the detection of the primordial gravitational waves. We plan to launch B-DECIGO, which is a scientific pathfinder of DECIGO, before DECIGO in the 2030s to demonstrate the technologies required for DECIGO, as well as to obtain fruitful scientific results to further expand the multi-messenger astronomy.

gr-qc↗

arXiv2019

The Recent Developmental Status of SNEGRAF: a Web-Based Gravitational Wave Signal Analyzer

Unveiling physical processes in a supernova is one of challenging topics of modern physics and astrophysics since that event is due to particle physics on a stellar scale and tightly related to nucleosynthesis in Universe. Multi-messenger astronomy, a combination, such as of electromagnetic-wave, gravitational-wave, and neutrino observations, will be a breakthrough to the puzzle. To boost the research, we released a web-based gravitational wave signal analyzer "SuperNova Event Gravitational-wave-display in Fukuoka (SNEGRAF)" last year (Eguchi et al. 2019). We are now working on an integration of the application with the RIDGE pipeline, which is for a coherent network analysis between the LIGO, VIRGO, and KAGRA observations (Hayama et al. 2007), and implemented in MATLAB. In the basic design phase, we decided to wrap RIDGE with a simple Python script and make it listen for connections from SNEGRAF. This design enables these two programs to be hosted on different servers independently, and minimizes the cyber risks of RIDGE. In this paper, we report the current developmental status of our system.

astro-ph.IM↗

arXiv2019

Prototype Implementation of a Web-Based Gravitational Wave Signal Analyzer: SNEGRAF

A direct detection of gravitational waves is one of the most exciting frontiers for modern astronomy and astrophysics. Gravitational wave signals combined with classical electro-magnetic observations, known as multi-messenger astronomy, promise newer and deeper insights about the cosmic evolution of astrophysical objects such as neutron starts and black holes. To this end, we have been developing an original data processing pipeline for KAGRA, a Japanese gravitational wave telescope, for optimal detections of supernova events. As a part of our project, we released a web application named SuperNova Event Gravitational-wave-display in Fukuoka (SNEGRAF) in autumn 2018. SNEGRAF accepts the users' theoretical waveforms as a plain text file consisting of a time series of $h_{+}$ and $h_{\times}$ (the plus and cross mode of gravitational waves, respectively), then displays the input, a corresponding spectrogram, and power spectrum together with KAGRA sensitivity curve and the signal-to-noise ratio; we adopt Google Visualization API for the interactive visualization of the input waveforms. However, it is a time-consuming task to draw more than $\sim 10^{5}$ data points directly with JavaScript, although the number can be typical for a supernova hunt by assuming a typical duration of the event and sampling rate of the detectors; a combination of recursive decimations of the original in the server-side program and an appropriate selection of them depending on the time duration requested by the user in a web browser achieves an acceptable latency. In this paper, we present the current design, implementation and optimization algorithms of SNEGRAF, and its future perspectives.

astro-ph.IM↗