arXiv subjects

Satoshi Hata

Publications and source records attributed to Satoshi Hata.

7 recordsLinked to original sources

arXiv2026

Freestanding GdBa2Cu3O7 Thin Films via Optimized Buffer Layer Design: Preserving Superconducting Properties

Freestanding GdBa2Cu3O7 (GdBCO) superconducting thin films were fabricated using a water-soluble Sr3Al2O6 (SAO) sacrificial layer in combination with thermal release tape. An amorphous Al2O3 capping layer was introduced to suppress crack formation during the lift-off process. The influence of buffer-layer design inserted between the GdBCO and SAO layers was systematically investigated with respect to structural integrity and superconducting properties after lift-off. A LaAlO3/SrTiO3 bilayer buffer was found to be essential for maintaining epitaxial growth and a superconducting transition temperature (Tc) of approximately 92 K after lift-off, comparable to that of the as-grown films. In contrast, a reversed SrTiO3/LaAlO3 bilayer and single-layer buffer structures led to a suppression of Tc, highlighting the critical role of stacking sequence. These results demonstrate that optimization of the buffer-layer design is a key factor for realizing high-quality freestanding GdBCO films while maintaining their superconducting characteristics.

cond-mat.supr-con↗

arXiv2024

Structural analysis and transport properties of [010]-tilt grain boundaries in Fe(Se,Te)

Understanding the nature of grain boundaries is a prerequisite for fabricating high-performance superconducting bulks and wires. For iron-based superconductors [e.g. Ba(Fe,Co)$_2$As$_2$, Fe(Se,Te), and NdFeAs(O,F)], the dependence of the critical current density $J_\mathrm{c}$ on misorientation angle ($\theta_\mathrm{GB}$) has been explored on [001]-tilt grain boundaries, but no data for other types of orientations have been reported. Here, we report on the structural and transport properties of Fe(Se,Te) grown on CeO$_2$-buffered symmetric [010]-tilt roof-type SrTiO$_3$ bicrystal substrates by pulsed laser deposition. X-ray diffraction and transmission electron microscopy revealed that $\theta_\mathrm{GB}$ of Fe(Se,Te) was smaller whereas $\theta_\mathrm{GB}$ of CeO$_2$ was larger than that of the substrate. The difference in $\theta_\mathrm{GB}$ between the CeO$_2$ buffer layer and the substrate is getting larger with increasing $\theta_\mathrm{GB}$. For $\theta_\mathrm{GB}\geq24^\circ$ of the substrates, $\theta_\mathrm{GB}$ of Fe(Se,Te) was zero, whereas $\theta_\mathrm{GB}$ of CeO$_2$ was continuously increasing. The inclined growth of CeO$_2$ can be explained by the geometrical coherency model. The $c$-axis growth of Fe(Se,Te) for $\theta_\mathrm{GB}\geq24^\circ$ of the substrates is due to the domain matching epitaxy on (221) planes of CeO$_2$. Electrical transport measurements confirmed no reduction of inter-grain $J_\mathrm{c}$ for $\theta_\mathrm{GB}\leq9^\circ$, indicative of strong coupling between the grains.

cond-mat.supr-con↗

arXiv2022

K-doped Ba122 epitaxial thin film on MgO substrate by buffer engineering

Molecular beam epitaxy of K-doped Ba122 (Ba$_{1-x}$K$_x$Fe$_\text{2}$As$_\text{2}$) superconductor was realized on a MgO substrate. Microstructural observation revealed that the undoped Ba122 served as a perfect buffer layer for epitaxial growth of the K-doped Ba122. The film exhibited a high critical temperature of 39.8 K and a high critical current density of 3.9 MA/cm$^\text{2}$ at 4 K. The successful growth of epitaxial thin film will enable artificial single grain boundary on oxide bicrystal substrates and reveal the grain boundary transport nature of K-doped Ba122.

cond-mat.supr-con↗

arXiv2021

Nanoscale Texture and Microstructure in NdFeAs(O,F)/IBAD-MgO Superconducting Thin Film with Superior Critical Current Properties

This paper reports the nanoscale texture and microstructure of a high-performance NdFeAs(O,F) superconducting thin film grown by molecular beam epitaxy on a textured MgO/Y$_2$O$_3$/Hastelloy substrate. The NdFeAs(O,F) film forms a highly textured columnar grain structure by epitaxial growth on the MgO template. Although the film contains stacking faults along the $ab$-plane as well as grain boundaries perpendicular to the $ab$-plane, good superconducting properties are measured: a critical temperature, $T _{\rm c}$, of 46 K and a self-field critical current density, $J_{\rm c}$, of $2 \times 10^6 \,{\rm A/cm^2}$ at 4.2 K. Automated crystal orientation mapping by scanning precession electron diffraction in transmission electron microscopy is employed to analyze the misorientation angles between adjacent grains in a large ensemble (247 grains). 99% of the grain boundaries show in-plane misorientation angles ($Δγ$) less than the critical angle $θ_{\rm c}$, which satisfies one of the necessary conditions for the high $J_{\rm c}$. Comparing the columnar grain size distribution with the mean distance of the flux line lattice, the triple junctions of low-angle grain boundaries are found to be effective pinning centers, even at high temperatures ($\ge$35 K) and/or low magnetic fields.

cond-mat.supr-con↗

arXiv2021

Approaching the ultimate superconducting properties of (Ba,K)Fe2As2 by naturally formed low-angle grain boundary networks

The most effective way to enhance the dissipation-free supercurrent in presence of magnetic field for type II superconductors is the introduction of defects that acts as artificial pinning centres (APCs) for the vortices. For instance, the in-field critical current density of doped BaFe2As2 (Ba122), one of the most technologically important Fe-based superconductors, has been improved over the last decade by APCs created by ion-irradiation. The technique of ion-irradiation has been commonly implemented to determine the ultimate superconducting properties. However, this method is rather complicated and expensive. Here, we report on a surprisingly high critical current density and strong pinning efficiency close to the crystallographic c-axis for a K-doped Ba122 epitaxial thin film without APCs, achieving performance comparable to ion-irradiated K-doped Ba122 single crystals. Microstructural analysis reveals that the film is composed of columnar grains having width around 30-60 nm. The grains are rotated around the b- (or a-) axis by 1.5 degree and around the c-axis by -1 degree, resulting in the formation of low-angle grain boundary networks. This study demonstrates that the upper limit of in-field properties reached in ion-irradiated K-doped Ba122 is achievable by grain boundary engineering, which is a simple and industrially scalable manner.

cond-mat.supr-con↗

arXiv2021

High $J_{\rm c}$ and low anisotropy of hydrogen doped NdFeAsO superconducting thin film

The recent realisations of hydrogen doped $Ln$FeAsO ($Ln$=Nd and Sm) superconducting epitaxial thin films call for further investigation of their structural and electrical transport properties. Here, we report on the microstructure of a NdFeAs(O,H) epitaxial thin film and its temperature, field, and orientation dependencies of the resistivity and the critical current density $J_{\rm c}$. The superconducting transition temperature $T_{\rm c}$ is comparable to NdFeAs(O,F). Transmission electron microscopy investigation supported that hydrogen is homogenously substituted for oxygen. A high self-field $J_{\rm c}$ of over 10 MA/cm$^2$ was recorded at 5 K, which is likely to be caused by a short London penetration depth. The anisotropic Ginzburg-Landau scaling for the angle dependence of $J_{\rm c}$ yielded temperature-dependent scaling parameters $γ_{\rm J}$ that decreased from 1.6 at 30 K to 1.3 at 5 K. This is opposite to the behaviour of NdFeAs(O,F). Additionally, $γ_{\rm J}$ of NdFeAs(O,H) is smaller than that of NdFeAs(O,F). Our results indicate that heavily electron doping by means of hydrogen substitution for oxygen in $Ln$FeAsO is highly beneficial for achieving high $J_{\rm c}$ with low anisotropy without compromising $T_{\rm c}$, which is favourable for high-field magnet applications.

cond-mat.supr-con↗

arXiv2021

Realization of epitaxial thin films of the superconductor K-doped BaFe$_\text{2}$As$_\text{2}$

The iron-based superconductor Ba$_{1-x}$K$_x$Fe$_\text{2}$As$_\text{2}$ is emerging as a key material for high magnetic field applications owing to the recent developments in superconducting wires and bulk permanent magnets. Epitaxial thin films play important roles in investigating and artificially tuning physical properties; nevertheless, the synthesis of Ba$_{1-x}$K$_x$Fe$_2$As$_2$ epitaxial thin films remained challenging because of the high volatility of K. Herein, we report the successful growth of epitaxial Ba$_{1-x}$K$_x$Fe$_\text{2}$As$_\text{2}$ thin films by molecular-beam epitaxy with employing a combination of fluoride substrates (CaF$_\text{2}$, SrF$_\text{2}$, and BaF$_\text{2}$) and a low growth temperature (350$-$420$^\circ$C). Our epitaxial thin film grown on CaF$_\text{2}$ showed sharp superconducting transition at an onset critical temperature of 36 K, slightly lower than bulk crystals by ~2 K due presumably to the strain effect arising from the lattice and thermal expansion mismatch. Critical current density ($J$$_\text{c}$) determined by the magnetization hysteresis loop is as high as 2.2 MA/cm$^\text{2}$ at 4 K under self-field. In-field $J$$_\text{c}$ characteristics of the film are superior to the bulk crystals. The realization of epitaxial thin films opens opportunities for tuning superconducting properties by epitaxial strain and revealing intrinsic grain boundary transport of Ba$_{1-x}$K$_x$Fe$_\text{2}$As$_\text{2}$.

cond-mat.supr-con↗