Searcharxiv⌕ Search

arXiv subjects

Saurabh Singh

Publications and source records attributed to Saurabh Singh.

At least 109 records · Page 6Linked to original sources

No Fuss Distance Metric Learning using Proxies

We address the problem of distance metric learning (DML), defined as learning a distance consistent with a notion of semantic similarity. Traditionally, for this problem supervision is expressed in the form of sets of points that follow an ordinal relationship -- an anchor point $x$ is similar to a set of positive points $Y$, and dissimilar to a set of negative points $Z$, and a loss defined over these distances is minimized. While the specifics of the optimization differ, in this work we collectively call this type of supervision Triplets and all methods that follow this pattern Triplet-Based methods. These methods are challenging to optimize. A main issue is the need for finding informative triplets, which is usually achieved by a variety of tricks such as increasing the batch size, hard or semi-hard triplet mining, etc. Even with these tricks, the convergence rate of such methods is slow. In this paper we propose to optimize the triplet loss on a different space of triplets, consisting of an anchor data point and similar and dissimilar proxy points which are learned as well. These proxies approximate the original data points, so that a triplet loss over the proxies is a tight upper bound of the original loss. This proxy-based loss is empirically better behaved. As a result, the proxy-loss improves on state-of-art results for three standard zero-shot learning datasets, by up to 15% points, while converging three times as fast as other triplet-based losses.

cs.CV↗

First results on the Epoch of Reionization from First Light with SARAS 2

Long wavelength spectral distortions in the Cosmic Microwave Background arising from the 21-cm transition in neutral Hydrogen are a key probe of Cosmic Dawn and the Epoch of Reionization. These features may reveal the nature of the first stars and ultra-faint galaxies that transformed the spin temperature and ionization state of the primordial gas. SARAS~2 is a spectral radiometer purposely designed for precision measurement of these monopole or all-sky global 21-cm spectral distortions. We use 63~hr night time observing of the radio background in the frequency band 110-200~MHz with the radiometer deployed at the Timbaktu Collective in Southern India to derive likelihoods for plausible redshifted 21-cm signals predicted by theoretical models. First light with SARAS 2 disfavors the class of models that feature weak X-ray heating (with $f_X \leq 0.1$) and rapid reionization (with peak $\frac{dT_b}{dz} \geq 120~\textrm{mK per unit redshift interval}$ ).

astro-ph.CO↗

All that is English may be Hindi: Enhancing language identification through automatic ranking of likeliness of word borrowing in social media

In this paper, we present a set of computational methods to identify the likeliness of a word being borrowed, based on the signals from social media. In terms of Spearman correlation coefficient values, our methods perform more than two times better (nearly 0.62) in predicting the borrowing likeliness compared to the best performing baseline (nearly 0.26) reported in literature. Based on this likeliness estimate we asked annotators to re-annotate the language tags of foreign words in predominantly native contexts. In 88 percent of cases the annotators felt that the foreign language tag should be replaced by native language tag, thus indicating a huge scope for improvement of automatic language identification systems.

cs.CL↗

Target-Quality Image Compression with Recurrent, Convolutional Neural Networks

We introduce a stop-code tolerant (SCT) approach to training recurrent convolutional neural networks for lossy image compression. Our methods introduce a multi-pass training method to combine the training goals of high-quality reconstructions in areas around stop-code masking as well as in highly-detailed areas. These methods lead to lower true bitrates for a given recursion count, both pre- and post-entropy coding, even using unstructured LZ77 code compression. The pre-LZ77 gains are achieved by trimming stop codes. The post-LZ77 gains are due to the highly unequal distributions of 0/1 codes from the SCT architectures. With these code compressions, the SCT architecture maintains or exceeds the image quality at all compression rates compared to JPEG and to RNN auto-encoders across the Kodak dataset. In addition, the SCT coding results in lower variance in image quality across the extent of the image, a characteristic that has been shown to be important in human ratings of image quality

cs.CV↗

Fabrication of a simple apparatus for the Seebeck coefficient measurement in high temperature region

A simple apparatus for the measurement of Seebeck coefficient ($α$) in the temperature range 300-620 K has been fabricated. Our design is appropriate for the characterization of samples with different geometries like disk and rod shaped. The sample holder assembly of the apparatus has been designed in such a way that, single heater used for sample heating purpose is enough to provide a self maintain temperature gradient (1-10 K) across the sample. The value of $α$ is obtained without explicit measurement of temperature gradient. The whole apparatus is fabricated from the materials, which are commonly available, so that any part can be replaced in case of any damage. Commercially available standard Nickel (Ni) metal sample has been used as a reference material for calibration of the instrument. The experimentally observed value of $α$ by our apparatus gives the similar temperature dependent behavior as reported in the literature. In order to study the thermoelectric behavior of oxide materials, we have synthesized polycrystalline LaCoO$_{3}$ powder samples by using solution combustion method and investigated the thermoelectric properties. Temperature dependent thermoelectric behavior of these samples were characterized in the temperature range 300-600 K.

physics.ins-det↗

Understanding the Thermoelectric Properties of LaCoO$_{3}$ Compound

We present the thermoelectric (TE) properties of LaCoO$_{3}$ compound in the temperature range 300-600 K. The experimental value of Seebeck coefficient ($α$) at 300 K is found to be $\sim$635 $μ$V/K. The value of $α$ decreases continuously with increase in temperature and reaches to $\sim$46 $μ$V/K at $\sim$600 K. The electronic and TE properties of the compound have also been investigated by combining the \textit{ab-initio} electronic structures and Boltzmann transport calculations. LSDA plus Hubbard U (U= 2.75 eV) calculation on low spin configuration of the compound gives an energy gap of $\sim$0.5 eV, which is close to the experimentally reported energy gap. The effective mass of holes (\textit{m$^{*}_h$}) at $Γ$ point is nearly two times larger than the value of effective mass of electrons (\textit{m$^{*}_e$}) at FB point along the L and T directions, whereas the \textit{m$^{*}_e$} at FB point along the $Γ$ direction is nearly eight times larger than the value of \textit{m$^{*}_h$} at $Γ$ point along the FB direction. The large effective mass at FB point along the $Γ$ direction suggests that the TE property of this compound is mainly decided by the effective mass of the charge carriers in this direction. The calculated temperature dependent values of $α$ are in fairly good agreement with experimental data in the temperature range 300-360 K, and above this temperature slight deviation is observed. The value of power factor (PF) for \textit{n}-type is $\sim$1.3 times larger the value of \textit{p}-type doped compound at 1100 K. The value of \textit{figure-of-merit} (\textit{ZT}) for \textit{n}-type doped compound is obtained $\sim$0.35 in the temperature range 600-1100 K, which suggests that with appropriate \textit{n}-type doping this compound can be used as a good TE material in the high temperature region.

cond-mat.str-el↗

An important role of temperature dependent scattering time in understanding the high temperature thermoelectric behavior of strongly correlated system: La$_{0.75}$Ba$_{0.25}$CoO$_{3}$

In the present work, we have reported the temperature dependent thermopower ($α$) behavior of La$_{0.75}$Ba$_{0.25}$CoO$_{3}$ compound in the temperature range 300-600 K. Using the Heikes formula, the estimated value of $α$ corresponding to high-spin configuration of Co$^{3+}$ and Co$^{4+}$ ions is found to be $\sim$$16$ $μ$V/K, which is close to the experimental value, $\sim$13 $μ$V/K, observed at $\sim$600 K. The temperature dependent TE behavior of the compound is studied by combining the WIEN2K and BoltzTrap code. The self consistency field calculations show that the compound have ferromagnetic ground state structure. The electronic structure calculations give half metallic characteristic with a small gap of $\sim$50 meV for down spin channel. The large and positive value for down spin channel is obtained due to the unique band structure shown by this spin channel. The temperature dependent relaxation time for both the spin-channel charge carriers is considered to study the thermopower data in temperature range 300-600 K. An almost linear values of $τ_{up}$ and a non-linear values of $τ_{dn}$ are taken into account for evaluation of $α$. By taking the temperature dependent values of relaxation time for both the spin channels, the calculated values of $α$ using two current model are found to be in good agreement with experimental values in the temperature range 300-600 K. At 300 K, the calculated value of electrical conductivity by using the same value of relaxation time, i.e. 0.1 $\times $10$^{-14}$ seconds for spin-up and 0.66 $\times $10$^{-14}$ seconds for spin-dn channel, is found to be equal to the experimentally reported value.

cond-mat.str-el↗

Fabrication of Simple Apparatus for Resistivity Measurement in High Temperature Range 300-620 K

A simple and low cost apparatus has been designed and built to measure the electrical resistivity, ($ρ$), of metal and semiconductors in 300-620 K temperature range. The present design is suitable to do measurement on rectangular bar sample by using conventional four-probe dc method. A small heater is made on the sample mounting copper block to achieve the desired temperature. Heat loss from sample holder is minimize by using very low thermal conductive insulator block. This unique design of heater and minimized heat loss from sample platform provide uniform sample temperature and also have very good thermal stability during the measurement. The electrical contacts of current leads and potential probes on the sample are done by using very thin (42 SWG) copper wires and high temperature silver paste. The use of limited components and small heater design make present instrument very simple, light weight, easy to sample mount, small in size, and low cost. To calibrate the instrument pure nickel sample was used, and two other materials La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ (LSMO) and LaCoO$_{3}$ (LCO) were also characterized to demonstrate the accuracy of this set-up. $ρ$(T) behavior on these samples were found to be in good agreement with the reported data. The metal-insulator transition for LSMO (T$_{MI}$ = $\sim$358 K) and the insulator-metal transition for LCO (T$_{IM}$ = $\sim$540 K) were clearly observed and these transitions temperature were also consistent with those reported in literature.

physics.gen-ph↗

Improved Lossy Image Compression with Priming and Spatially Adaptive Bit Rates for Recurrent Networks

We propose a method for lossy image compression based on recurrent, convolutional neural networks that outperforms BPG (4:2:0 ), WebP, JPEG2000, and JPEG as measured by MS-SSIM. We introduce three improvements over previous research that lead to this state-of-the-art result. First, we show that training with a pixel-wise loss weighted by SSIM increases reconstruction quality according to several metrics. Second, we modify the recurrent architecture to improve spatial diffusion, which allows the network to more effectively capture and propagate image information through the network's hidden state. Finally, in addition to lossless entropy coding, we use a spatially adaptive bit allocation algorithm to more efficiently use the limited number of bits to encode visually complex image regions. We evaluate our method on the Kodak and Tecnick image sets and compare against standard codecs as well recently published methods based on deep neural networks.

cs.CV↗

Understanding the High Temperature Thermoelectric Properties of La$_{0.82}$Ba$_{0.18}$CoO$_{3}$ Compound using DFT+U Method

Normally, understanding the temperature dependent transport properties of strongly correlated electron systems remains challenging task due to complex electronic structure and its variations (around E$_{F}$) with temperature. Here, we report the applicability of DFT+U in explaining thermopower ($α$) and electrical conductivity ($σ$) in high temperature region. We have measured temperature dependent $α$ and $σ$ in the 300-600 K range. The non-monotonic temperature dependent behavior of $α$ and metallic behavior of $σ$ were observed. The value of $α$ at 300 K was $\sim$15.80 $μ$V/K and it decreases upto $\sim$477 K ($\sim$11.6 $μ$V/K) and it further increases with temperature to the $\sim$14.8 $μ$V/K at 600 K, whereas the values of $σ$ were found to be $\sim$1.42 $\times$10$^{5}$ $Ω$$^{-1}$ m$^{-1}$ and $\sim$0.20 $\times$10$^{5}$ $Ω$$^{-1}$ m$^{-1}$ at 300 and 600 K, respectively. Combining the WIEN2k and BoltzTraP code, the electronic structure and temperature dependent transport coefficients were calculated. The ferromagnetic ground state electronic structure with half-metallic character obtained from the DFT+U calculations, U = 3.1 eV, provides better explanation of high-temperature transport behavior. Two current model was used for calculation of $α$ and $σ$ where the temperature dependent values of relaxation time ($τ$), almost linear for up-spin, $τ$$_{up}$, and non-linear for dn-spin, $τ$$_{dn}$, were used and estimated values were found to be in good agreement with experimentally reported values.

cond-mat.str-el↗

Is this word borrowed? An automatic approach to quantify the likeliness of borrowing in social media

Code-mixing or code-switching are the effortless phenomena of natural switching between two or more languages in a single conversation. Use of a foreign word in a language; however, does not necessarily mean that the speaker is code-switching because often languages borrow lexical items from other languages. If a word is borrowed, it becomes a part of the lexicon of a language; whereas, during code-switching, the speaker is aware that the conversation involves foreign words or phrases. Identifying whether a foreign word used by a bilingual speaker is due to borrowing or code-switching is a fundamental importance to theories of multilingualism, and an essential prerequisite towards the development of language and speech technologies for multilingual communities. In this paper, we present a series of novel computational methods to identify the borrowed likeliness of a word, based on the social media signals. We first propose context based clustering method to sample a set of candidate words from the social media data.Next, we propose three novel and similar metrics based on the usage of these words by the users in different tweets; these metrics were used to score and rank the candidate words indicating their borrowed likeliness. We compare these rankings with a ground truth ranking constructed through a human judgment experiment. The Spearman's rank correlation between the two rankings (nearly 0.62 for all the three metric variants) is more than double the value (0.26) of the most competitive existing baseline reported in the literature. Some other striking observations are, (i) the correlation is higher for the ground truth data elicited from the younger participants (age less than 30) than that from the older participants, and (ii )those participants who use mixed-language for tweeting the least, provide the best signals of borrowing.

cs.CL↗

The importance of temperature dependent energy gap in the understanding of high temperature thermoelectric properties

In the present work, we show the importance of temperature dependent energy band gap, E$_{g}$(T), in understanding the high temperature thermoelectric (TE) properties of material by considering LaCoO$_{3}$ (LCO) and ZnV$_{2}$O$_{4}$ (ZVO) compounds as a case study. For the fix value of band gap, E$_{g}$, deviation in the values of $α$ has been observed above 360 K and 400 K for LCO and ZVO compounds, respectively. These deviation can be overcomed by consideration of temperature dependent band gap. The change in used value of E$_{g}$ with respect to temperature is $\sim$4 times larger than that of InAs. This large temperature dependence variation in E$_{g}$ can be attributed to decrement in the effective on-site Coulomb interaction due to lattice expansion. At 600 K, the value of \textit{ZT} for \textit{n} and \textit{p-doped}, LCO is $\sim$0.35 which suggest that it can be a used as a potential material for TE device. This work clearly suggest that one should consider the temperature dependent band gap in predicting the high temperature TE properties of insulating materials.

cond-mat.str-el↗

Investigation of the Thermoelectric Properties of ZnV$_{2}$O$_{4}$ Compound in High Temperature Region

In the present work, we report the experimental thermopower ($α$) data for ZnV$_{2}$O$_{4}$ compound in the high temperature range 300-600 K. The value of $α$ is found to be $\sim$184 and $\sim$126 $μ$V/K at $\sim$300 and $\sim$600 K, respectively. The temperature dependent behavior of $α$ is almost linear in the measured temperature range. To understand the large and positive $α$ value observed in this compound, we have also investigated the electronic and thermoelectric properties by combining the \textit{ab-initio} electronic structures calculations with Boltzmann transport theory. Within the local spin density approximation plus Hubbard U, the anti-ferromagnetic ground state calculation gives an energy gap $\sim$0.33 eV for U=3.7 eV, which is in accordance with the experimental results. The effective mass for holes in the valance band is found nearly four times that of electrons in conduction band. The large effective mass of holes are mainly responsible for the observed positive and large $α$ value in this compound. There is reasonably good matching between calculated and experimental $α$ data in the temperature range 300-410 K. The power factor calculation shows that thermoelectric properties in high temperature region can be enhanced by tuning the sample synthesis conditions and suitable doping. The estimated value of \textit{figure-of-merit}, ZT, at different absolute temperature suggest that ZnV$_{2}$O$_{4}$ compound can be a good thermoelectric material in high temperature range.

cond-mat.mtrl-sci↗

Swapout: Learning an ensemble of deep architectures

We describe Swapout, a new stochastic training method, that outperforms ResNets of identical network structure yielding impressive results on CIFAR-10 and CIFAR-100. Swapout samples from a rich set of architectures including dropout, stochastic depth and residual architectures as special cases. When viewed as a regularization method swapout not only inhibits co-adaptation of units in a layer, similar to dropout, but also across network layers. We conjecture that swapout achieves strong regularization by implicitly tying the parameters across layers. When viewed as an ensemble training method, it samples a much richer set of architectures than existing methods such as dropout or stochastic depth. We propose a parameterization that reveals connections to exiting architectures and suggests a much richer set of architectures to be explored. We show that our formulation suggests an efficient training method and validate our conclusions on CIFAR-10 and CIFAR-100 matching state of the art accuracy. Remarkably, our 32 layer wider model performs similar to a 1001 layer ResNet model.

cs.CV↗

Where To Look: Focus Regions for Visual Question Answering

We present a method that learns to answer visual questions by selecting image regions relevant to the text-based query. Our method exhibits significant improvements in answering questions such as "what color," where it is necessary to evaluate a specific location, and "what room," where it selectively identifies informative image regions. Our model is tested on the VQA dataset which is the largest human-annotated visual question answering dataset to our knowledge.

cs.CV↗

On the detection of global 21-cm signal from Reionization using interferometers

Detection of the global redshifted 21-cm signal is an excellent means of deciphering the physical processes during the Dark Ages and subsequent Epoch of Reionization (EoR). However, detection of this faint monopole is challenging due to high precision required in instrumental calibration and modeling of substantially brighter foregrounds and instrumental systematics. In particular, modeling of receiver noise with mK accuracy and its separation remains a formidable task in experiments aiming to detect the global signal using single-element spectral radiometers. Interferometers do not respond to receiver noise; therefore, we explore here the theory of the response of interferometers to global signals. In other words, we discuss the spatial coherence in the electric field arising from the monopole component of the 21-cm signal and methods for its detection using sensor arrays. We proceed by first deriving the response to uniform sky of two-element interferometers made of unit dipole and resonant loop antennas, then extend the analysis to interferometers made of 1-D arrays and also consider 2-D aperture antennas. Finally, we describe methods by which the coherence might be enhanced so that the interferometer measurements yield improved sensitivity to the monopole component. We conclude that (a) it is indeed possible to measure the global 21-cm from EoR using interferometers, (b) a practically useful configuration is with omnidirectional antennas as the interferometer elements, and (c) that the spatial coherence may be enhanced and detectability of the global EoR signal may be smoothened using, for example, a space beam splitter between the interferometer elements.

astro-ph.IM↗

Part Localization using Multi-Proposal Consensus for Fine-Grained Categorization

We present a simple deep learning framework to simultaneously predict keypoint locations and their respective visibilities and use those to achieve state-of-the-art performance for fine-grained classification. We show that by conditioning the predictions on object proposals with sufficient image support, our method can do well without complicated spatial reasoning. Instead, inference methods with robustness to outliers, yield state-of-the-art for keypoint localization. We demonstrate the effectiveness of our accurate keypoint localization and visibility prediction on the fine-grained bird recognition task with and without ground truth bird bounding boxes, and outperform existing state-of-the-art methods by over 2%.

cs.CV↗

Magnetotransport and thermal properties characterization of 55 K superconductor SmFeAsO0.85F0.15

Correlation between structural/microstructural and magneto-thermal transport properties of FeAs-based SmFeAsO and SmFeAsO0.85F0.15 has been studied in detail. The Rietveld analysis of room temperature powder X-ray diffraction (XRD) data reveals that both the samples are single phase, with very small amount of rare earth impurity in the F doped compound. Electron microscopic investigations show that compounds have layered morphology and structure, with the individual grains being surrounded by amorphous layers. The average grain boundary thickness is ~5 nm. The F free material is found to be magnetic and shows the appearance of Fe spin density wave (SDW) like order at T = 150 K. The F doped compound (SmFeAsO0.85F0.15) shows the occurrence of superconductivity at Tc(R=0, H=0)- 55 K, which decreases to 42 K at magnetic field (H) of 13 kOe. The superconducting transition was also confirmed by DC magnetization and AC susceptibility measurements. The intra-grain critical current density (Jc) calculated using the Bean critical state model is found to be around 5.26 x 10^4 A/cm2 at 5 K in zero field (H=0). The dependence of thermally activated flux flow energy (U/KB) on the applied magnetic field has been observed. AC susceptibility measurements at different amplitude of applied AC drive field confirm the granular nature of the superconducting compound. is confirmed. Both Fe (SDW) at 150K for SmFeAsO and 55K superconductivity in case of SmFeAsO0.85F0.15 sample has confirmed by Specific heat [Cp(T)] measurement too. Further Sm orders anti-ferro-magnetically at 4.5K for non-superconducting and at 3.5K for superconducting samples, also the entropy change is reduced significantly for the later than the former. Summarily complete physical property characterization for both non-superconducting SmFeAsO and 55K superconductor SmFeAsO0.85F0.15 samples is provided and discussed in the current article.

cond-mat.supr-con↗