arXiv subjects

Sayak Bose

Publications and source records attributed to Sayak Bose.

14 recordsLinked to original sources

arXiv2026

The FLARE Facility

The Facility for Laboratory Reconnection Experiments (FLARE) has been constructed to study magnetic reconnection in multiple X-line regimes relevant to space, astrophysical, and fusion plasmas. Building upon the successful design of the Magnetic Reconnection Experiment (MRX), FLARE features a larger physical volume, stronger magnetic fields, and an independent ohmic heating drive to significantly extend the accessible parameter space, targeting Lundquist numbers up to S ~ 10^5 and normalized system sizes up to \lambda ~ 10^3. This paper details the facility's core engineering components, including the primary vacuum vessel, internal flux cores, highly segmented external coil systems, modular capacitor banks, and the safety interlock and control architecture. An initial diagnostic suite is presented, comprising high-resolution 2D magnetic probe arrays, triple Langmuir probes, a fully fiber-coupled interferometer, ion Doppler spectroscopy, and fast camera imaging. Initial operations demonstrate the device's experimental flexibility and reliability, successfully executing symmetric push-pull reconnection, spheromak merging, and asymmetric downstream configurations. Currently operating within "Stage 2.5" with S ~ 2,500 and \lambda ~ 60 for anti-parallel reconnection, FLARE provides immediate access to the multiple X-line regimes. Planned hardware upgrades, advanced diagnostic additions, and integration with fully kinetic simulations will further expand its capabilities as it transitions into a collaborative user facility for the broader plasma science community.

physics.plasm-ph↗

arXiv2026

Role of Magnetic Field in the Redistribution of Turbulence from Large-Scale Structures to Small-Scale Fluctuations

Magnetized plasmas with equilibrium density gradients support drift-wave turbulence, which is often regulated by self-generated zonal flows. In this work, we experimentally examine the effect of increasing the magnetic field on turbulence characteristics in a linear plasma device. As the magnetic field is increased from 600 to 1000 G, zonal flow is suppressed while the mean flow increases. Spectral analysis of density and potential fluctuations shows a redistribution of power from low-frequency (0.1-1 kHz) to high-frequency (1-300 kHz) components, along with an increase in the spectral slope and the ratio PHF/PLF. This change is linked to a reduction in Reynolds stress due to the loss of correlation between radial and poloidal velocity fluctuations, which possibly weakens the drive for zonal flow generation. Similar behavior is observed near the peak gradient region, also indicating its global nature. The present results suggest a transition from a zonal-flow-dominated regime to a state dominated by smaller-scale fluctuations, possibly influenced by mean flow shear. These findings highlight how the magnetic field redistributes spectral energy across frequency scales in drift-wave turbulent plasmas

physics.plasm-ph↗

arXiv2026

Transition from Zonal Flows to Streamer like structures and associated edge Fluctuations

We report experimental observations of a controlled transition from a zonal-flow (ZF) dominated regime to a coexistence regime of ZFs and streamers, and finally to a streamer-dominated state in a linear magnetized plasma column. The controlling parameter is the ion-neutral collision frequency. At low collisionality (2 x 10^-5 mbar), the plasma turbulence is dominated by coherent ZFs (600-700 Hz) that are nonlinearly driven by drift-wave fluctuations. With increasing collisionality (5 x 10^-4 mbar), the ZF growth is reduced and streamers emerge through nonlinear coupling of neighboring drift modes mediated by a mediator mode. At high collisionality (2 x 10^-3 mbar), ZFs are strongly damped and the turbulence becomes streamer-dominated. For each of these turbulent states, the corresponding edge fluctuations transition from coherent, symmetric to intermittent, asymmetric fluctuations with enhanced low-frequency content and larger spatial scales that can result in convective transport. Our results demonstrate the possibility of selective excitation of ZFs and streamers by regulating their collisional damping and establish the ion-neutral collision frequency as an effective control knob for regulating turbulent structures and edge transport in magnetized plasmas.

physics.plasm-ph↗

arXiv2026

Experimental observation of drift acoustic cnoidal waves in a magnetized plasma

We report the experimental observation of highly nonlinear coherent structures in a linear magnettized plasma characterized by a strong background density gradient and significant ExB velocity shear under high ion-neutral collisionality. These structures, identified as drift acoustic waves, exhibit large normalized density fluctuations reaching amplitudes of up to ~10% and show periodic sawtooth-like waveforms. These observed waveforms are well described by cnoidal functions, corresponding to stationary nonlinear wave trains. Cnoidal waves are exact solutions of the Korteweg-de Vries (KdV)-type equations, alongside the more commonly studied soliton solutions. To the best of our knowledge, this work presents the first controlled experimental observation of cnoidal wave trains in a highly collisional magnetized plasma through systematic variation of profile gradients. These findings provide important new insights into the nonlinear evolution and saturation of drift acoustic waves in inhomogeneous, sheared, and collisional magnetized plasmas.

physics.plasm-ph↗

arXiv2025

Shock wave bending around a dusty plasma void

We report on experimental observations of the bending of a dust acoustic shock wave around a dust void region. This phenomenon occurs as a planar shock wavefront encounters a compressible obstacle in the form of a void whose size is larger than the wavelength of the wave. As they collide, the central portion of the wavefront, that is the first to touch the void, is blocked while the rest of the front continues to propagate, resulting in an inward bending of the shock wave. The bent shock wave eventually collapses, leading to the transient trapping of dust particles in the void. Subsequently, a Coulomb explosion of the trapped particles generates a bow shock. The experiments have been carried out in a DC glow discharge plasma, where the shock wave and the void are simultaneously created as self-excited modes of a three-dimensional dust cloud. The salient features of this phenomenon are reproduced in molecular dynamics simulations, which provide valuable insights into the underlying dynamics of this interaction.

physics.plasm-ph↗

arXiv2025

Measurement of energy reduction by inertial Alfv\'en waves propagating through parallel gradients in the Alfv\'en speed

We have studied the propagation of inertial Alfv\'en waves through parallel gradients in the Alfv\'en speed using the Large Plasma Device at the University of California, Los Angeles. The reflection and transmission of Alfv\'en waves through inhomogeneities in the background plasma is important for understanding wave propagation, turbulence, and heating in space, laboratory, and astrophysical plasmas. Here we \rev{present inertial Alfv\'en waves, under conditions relevant to solar flares and the solar corona. We find} that the transmission of the inertial Alfv\'en waves is reduced as the sharpness of the gradient is increased. Any reflected waves were below the detection limit of our experiment and reflection cannot account for all of the energy not transmitted through the gradient. Our findings indicate that, for both kinetic and inertial Alfv\'en waves, the controlling parameter for the transmission of the waves through an Alfv\'en speed gradient is the ratio of the Alfv\'en wavelength along the gradient divided by the scale length of the gradient. Furthermore, our results suggest that an as-yet-unidentified damping process occurs in the gradient.

physics.plasm-ph↗

arXiv2024

Observation of Kolmogorov turbulence due to multiscale vortices in dusty plasma experiments

We report the experimental observation of fully developed Kolmogorov turbulence originating from self-excited vortex flows in a three-dimensional (3D) dust cloud. The characteristic -5/3 scaling of three-dimensional Kolmogorov turbulence is universally observed in both the spatial and temporal power spectra. Additionally, the 2/3 scaling in the second-order structure function further confirms the presence of Kolmogorov turbulence. We also identified a slight deviation in the tails of the probability distribution functions for velocity gradients. The dust cloud formed in the diffused region away from the electrode and above the glass device surface in the glow discharge experiments. The dust rotation was observed in multiple experimental campaigns under different discharge conditions at different spatial locations and background plasma environments.

physics.plasm-ph↗

arXiv2024

Experimental study of Alfv\'en wave reflection from an Alfv\'en-speed gradient relevant to the solar coronal holes

We report the first experimental detection of a reflected Alfv\'en wave from an Alfv\'en-speed gradient under conditions similar to those in coronal holes. The experiments were conducted in the Large Plasma Device at the University of California, Los Angeles. We present the experimentally measured dependence of the coefficient of reflection versus the wave inhomogeneity parameter, i.e., the ratio of the wave length of the incident wave to the length scale of the gradient. Two-fluid simulations using the Gkeyll code qualitatively agree with and support the experimental findings. Our experimental results support models of wave heating that rely on wave reflection at low heights from a smooth Alfv\'en-speed gradient to drive turbulence.

astro-ph.SR↗

arXiv2023

Laboratory study of the failed torus mechanism in arched, line-tied, magnetic flux ropes

Coronal mass ejections (CMEs) are some of the most energetic and violent events in our solar system. The prediction and understanding of CMEs is of particular importance due to the impact that they can have on Earth-based satellite systems, and in extreme cases, ground-based electronics. CMEs often occur when long-lived magnetic flux ropes (MFRs) anchored to the solar surface destabilize and erupt away from the Sun. One potential cause for these eruptions is an ideal magnetohydrodynamic (MHD) instability such as the kink or torus instability. Previous experiments on the Magnetic Reconnection eXperiment (MRX) revealed a class of MFRs that were torus-unstable but kink-stable, which failed to erupt. These "failed-tori" went through a process similar to Taylor relaxation where the toroidal current was redistributed before the eruption ultimately failed. We have investigated this behavior through additional diagnostics that measure the current distribution at the foot points and the energy distribution before and after an event. These measurements indicate that ideal MHD effects are sufficient to explain the energy distribution changes during failed torus events. This excludes Taylor relaxation as a possible mechanism of current redistribution during an event. A new model that only requires non-ideal effects in a thin layer above the electrodes is presented to explain the observed phenomena. This work broadens our understanding of the stability of MFRs and the mechanism behind the failed torus through the improved prediction of the torus instability and through new diagnostics to measure the energy inventory and current profile at the foot points.

astro-ph.SR↗

arXiv2022

Two-dimensional plasma density evolution local to the inversion layer during sawtooth crash events using Beam Emission Spectroscopy

We present methods for analyzing Beam Emission Spectroscopy (BES) data to obtain the plasma density evolution associated with rapid sawtooth crash events at the DIII-D tokamak. BES allows coverage over a 2-D spatial plane, inherently local measurements, with fast time responses, and therefore provides a valuable new channel for data during sawtooth events. A method is developed to remove sawtooth-induced edge-light pulses contained in the BES data. The edge light pulses appear to be from the $\rm{D}_α$ emission produced by edge recycling during sawtooth events, and are large enough that traditional spectroscopic filtering and data analysis techniques are insufficient to deduce physically meaningful quantities. A cross-calibration of 64 BES channels is performed using a novel method to ensure accurate measurements. For the large-amplitude density oscillations observed, we discuss and use the non-linear relationship between BES signal $δI/I_{0}$ and plasma density variation $δn_{e}/n_{e0}$. 2-D BES images cover a 8~cm~$\times$~20~cm region around the sawtooth inversion layer and show large-amplitude density oscillations, with additional significant spatial variations across the inversion layer, which grows and peaks near the time of the temperature crash. The edge light removal technique and method of converting large-amplitude $δI/I_{0}$ to $δn_{e}/n_{e0}$ presented here may help analyze other impulsive MHD phenomena in tokamaks.

physics.plasm-ph↗

arXiv2020

Laboratory study of the torus instability threshold in solar-relevant, line-tied magnetic flux ropes

Coronal mass ejections (CME) occur when long-lived magnetic flux ropes (MFR) anchored to the solar surface destabilize and erupt away from the Sun. This destabilization is often described in terms of an ideal magnetohydrodynamic (MHD) instability called the torus instability. It occurs when the external magnetic field decreases sufficiently fast such that its decay index, $n=-z\,\partial\,(\ln B)/\partial z$ is larger than a critical value, $n>n_{\rm cr}$, where $n_{\rm cr}=1.5$ for a full, large aspect ratio torus. However, when this is applied to solar MFRs, a range of conflicting values for $n_{\rm cr}$ is found in the literature. To investigate this discrepancy, we have conducted laboratory experiments on arched, line-tied flux ropes and have applied a theoretical model of the torus instability. Our model describes an MFR as a partial torus with footpoints anchored in a conducting surface and numerically calculates various magnetic forces on it. This calculation yields a better prediction of $n_{\rm cr}$ which takes into account the specific parameters of the MFR. We describe a systematic methodology to properly translate laboratory results to their solar counterparts, provided that the MFRs have sufficiently small edge safety factor, or equivalently, large enough twist. After this translation, our model predicts that $n_{\rm cr}$ in solar conditions often falls near $n_{\rm cr}^{\rm Sol}\sim0.9$ and within a larger range of $n_{\rm cr}^{\rm Sol}\sim(0.7,1.2)$ depending on the parameters. The methodology of translating laboratory MFRs to their solar counterparts enables quantitative investigations of the initiation of CMEs through laboratory experiments. These experiments allow for new physics insights that are required for better predictions of space weather events but are difficult to obtain otherwise.

astro-ph.SR↗

arXiv2020

Understanding the working of a B-dot probe

Magnetic pickup loops or B-dot probes are one of the oldest known sensors of time-varying magnetic fields. The operating principle is based on Faraday's law of electromagnetic induction. However, obtaining accurate measurements of time-varying magnetic fields using these kinds of probes is a challenging task. A B-dot probe and its associated circuit are prone to electrical oscillations. As a result, the measured signal may not faithfully represent the magnetic field sampled by the B-dot probe. In this paper, we have studied the transient response of a B-dot probe and its associated circuit to a time-varying magnetic field. Methods of removing the oscillations pertaining to the detector structure are described. After removing the source of the oscillatory signal, we have shown that the time-integrated induced emf measured by the digitiser is linearly proportional to the magnetic field sampled by the B-dot probe, thus verifying the faithfulness of the measured signal.

physics.app-ph↗

arXiv2019

Measured reduction in Alfvén wave energy propagating through longitudinal gradients scaled to match solar coronal holes

We have explored the effectiveness of a longitudinal gradient in Alfvén speed in reducing the energy of propagating Alfvén waves under conditions scaled to match solar coronal holes. The experiments were conducted in the Large Plasma Device at the University of California, Los Angeles. Our results show that the energy of the transmitted Alfvén wave decreases as the inhomogeneity parameter, $λ/L_{\rm A}$, increases. Here, $λ$ is the wavelength of the Alfvén wave and $L_{\rm A}$ is the scale length of Alfvén speed gradient. For gradients similar to those in coronal holes, the waves are observed to lose a factor of $\approx 5$ more energy than they do when propagating through a uniform plasma without a gradient. We have carried out further experiments and analyses to constrain the cause of wave energy reduction in the gradient. The loss of Alfvén wave energy from mode coupling is unlikely, as we have not detected any other modes. Contrary to theoretical expectations, the reduction in the energy of the transmitted wave is not accompanied by a detectable reflected wave. Nonlinear effects are ruled out as the amplitude of the initial wave is too small and the wave frequency well below the ion cyclotron frequency. Since the total energy must be conserved, it is possible that the lost wave energy is being deposited in the plasma. Further studies are needed to explore where the energy is going.

physics.plasm-ph↗

arXiv2018

Hollow density formation in magnetically expanding helicon plasma

Measurement of radial density profile in both the source and expansion chambers of a helicon plasma device have revealed that it is always centrally peaked in the source chamber, whereas in the expansion chamber near the diverging magnetic field it becomes hollow above a critical value of the magnetic field. This value corresponds to that above which both electrons and ions become magnetized. The temperature profile is always peaked off- axis and tail electrons are found at the peak location in both the source and expansion chambers. Rotation of the tail electrons in the azimuthal direction in the expansion chamber due to gradient-B drift produces more ionization off-axis and creates a hollow density profile; however, if the ions are not magnetized, the additional ionization does not cause hollowness.

physics.plasm-ph↗