arXiv subjects

Sayeef Salahuddin

Publications and source records attributed to Sayeef Salahuddin.

67 records · Page 4Linked to original sources

arXiv2011

Experimental Evidence of Ferroelectric Negative Capacitance in Nanoscale Heterostructures

We report a proof-of-concept demonstration of negative capacitance effect in a nanoscale ferroelectric-dielectric heterostructure. In a bilayer of ferroelectric, Pb(Zr0.2Ti0.8)O3 and dielectric, SrTiO3, the composite capacitance was observed to be larger than the constituent SrTiO3 capacitance, indicating an effective negative capacitance of the constituent Pb(Zr0.2Ti0.8)O3 layer. Temperature is shown to be an effective tuning parameter for the ferroelectric negative capacitance and the degree of capacitance enhancement in the heterostructure. Landau's mean field theory based calculations show qualitative agreement with observed effects. This work underpins the possibility that by replacing gate oxides by ferroelectrics in MOSFETs, the sub threshold slope can be lowered below the classical limit (60 mV/decade).

cond-mat.mes-hall↗

arXiv2011

Heterojunction Vertical Band-to-Band Tunneling Transistors for Steep Subthreshold Swing and High ON Current

We propose a Heterojunction Vertical Tunneling FET and show using self-consistent ballistic quantum transport simulations that it can provide very steep subthreshold swings and high ON current, thereby improving the scalability of Tunnel FETs for high performance. The turn-on in pocket region of the device is dictated by modulation of heterojunction barrier height. The steepness of turn-on is increased because of simultaneous onset of tunneling in the pocket and the region underneath and also due to contribution to current by vertical tunneling in the pocket. These factors can be engineered by tuning heterojunction band offsets.

cond-mat.mes-hall↗

arXiv2010

Barrier-Free Tunneling in a Carbon Heterojunction Transistor

Recently it has been experimentally shown that a graphene nanoribbon (GNR) can be obtained by unzipping a carbon nanotube (CNT). This makes it possible to fabricate all-carbon heterostructures that have a unique interface between a CNT and a GNR. Here we demonstrate that such a heterojunction may be utilized to obtain a unique transistor operation. By performing a self-consistent non-equilibrium Green's function (NEGF) based calculation on an atomistically defined structure, we show that such a transistor may reduce energy dissipation below the classical limit while not compromising speed - thus providing an alternate route towards ultra low-power, high-performance carbon-heterostructure electronics.

cond-mat.mes-hall↗

arXiv2010

Analysis of InAs Vertical and Lateral Band-to-Band Tunneling Transistors: Leveraging Vertical Tunneling for Improved Performance

Using self-consistent quantum transport simulation on realistic devices, we show that InAs band-to-band Tunneling Field Effect Transistors (TFET) with a heavily doped pocket in the gate-source overlap region can offer larger ON current and steeper subthreshold swing as compared to conventional tunneling transistors. This is due to an additional tunneling contribution to current stemming from band overlap along the body thickness. However, a critical thickness is necessary to obtain this advantage derived from 'vertical' tunneling. In addition, in ultra small InAs TFET devices, the subthreshold swing could be severely affected by direct source-to-drain tunneling through the body.

cond-mat.mes-hall↗

arXiv2010

Built-in and induced polarization across LaAlO$_3$/SrTiO$_3$ heterojunctions

Ionic crystals terminated at oppositely charged polar surfaces are inherently unstable and expected to undergo surface reconstructions to maintain electrostatic stability. Essentially, an electric field that arises between oppositely charged atomic planes gives rise to a built-in potential that diverges with thickness. In ultra thin film form however the polar crystals are expected to remain stable without necessitating surface reconstructions, yet the built-in potential has eluded observation. Here we present evidence of a built-in potential across polar \lao ~thin films grown on \sto ~substrates, a system well known for the electron gas that forms at the interface. By performing electron tunneling measurements between the electron gas and a metallic gate on \lao ~we measure a built-in electric field across \lao ~of 93 meV/Å. Additionally, capacitance measurements reveal the presence of an induced dipole moment near the interface in \sto, illuminating a unique property of \sto ~substrates. We forsee use of the ionic built-in potential as an additional tuning parameter in both existing and novel device architectures, especially as atomic control of oxide interfaces gains widespread momentum.

cond-mat.mtrl-sci↗

arXiv2009

Voltage Asymmetry of Spin-Transfer Torques

We present a Non-Equilibrium Green's Function based model for spin torque transfer (STT) devices which provides quantitative agreement with experimentally measured (1) differential resistances, (2) Magnetoresistance (MR), (3) In-plane torque and (4) out-of-plane torque over a range of bias voltages, using a single set of three adjustable parameters. We believe this is the first theoretical model that is able to cover this diverse range of experiments and a key aspect of our model is the inclusion of multiple transverse modes. We also provide a simple explanation for the asymmetric bias dependence of the in-plane torque, based on the polarization of the two contacts in energy range of transport.

cond-mat.mes-hall↗

arXiv2009

Non-Linear Temperature Dependence in Graphene Nanoribbon Tunneling Transistors

It is usually assumed that tunneling current is fairly independent of temperature. By performing an atomistic transport simulation, we show, to the contrary, that the subthreshold tunneling current in a graphene nanoribbon (GNR) band-to-band tunneling transistor (TFET) should show significant and non-linear temperature dependence. Furthermore, the nature of this non-linearity changes as a function of source/drain doping and vertical electric field, indicating that such non-linearity, if properly understood, may provide important insights into the tunneling phenomena. Finally, by developing a pseudo-analytical method, we predict that such temperature dependence is not unique to GNR but should rather be a general behavior for any band-to-band tunneling transistor independent of the channel material.

cond-mat.mes-hall↗

arXiv2009

Switching Energy of Ferromagnetic Logic Bits

Power dissipation in switching devices is believed to be the single most important roadblock to the continued down scaling of electronic circuits. There is a lot of experimental effort at this time to implement switching circuits based on magnets and it is important to establish power requirements for such circuits and their dependence on various parameters. This paper analyzes switching energy which is dissipated in the switching process of single domain Ferromagnets used as cascadable logic bits. We obtain generic results that can be used for comparison with alternative technologies or guide the design of magnet based switching circuits. Two central results are established. One is that the switching energy drops significantly if the ramp time of an external pulse exceeds a critical time. This drop occurs more rapidly than what is normally expected of adiabatic switching for a capacitor. The other result is that under the switching scheme that allows for logic operations, the switching energy can be described by a single equation in both fast and slow limits. Furthermore, these generic results are used to quantitatively examine the possible operation frequencies and integration densities of these logic bits which show that nanomagnets can have scaling laws similar to CMOS technology.

cond-mat.mes-hall↗

arXiv2008

Spin Transfer Torque as a Non-Conservative Pseudo-Field

In this paper we show that the spin transfer torque can be described by a pseudo magnetic field, proportional to the magnetic moment of the itinerant electrons that enters the Landau-Lifshitz-Gilbert equation in the same way as other external or internal magnetic fields. However, unlike an ordinary magnetic field, which is always conservative in nature, the spin torque induced pseudo field may have both conservative and non-conservative components. We further show that the magnetic moment of itinerant electrons develops an out-of-plane component only at non-equilibrium and this component is responsible for the Slonczewski type switching that acts against the damping and is always non-conservative. On the other hand, the in-plane components of the pseudo field exist both at equilibrium and out-of-equilibrium, and are responsible for the field like term. For tunnel based devices, this term results in lower switching current for anti-parallel (AP) to parallel (P) switching compared to P to AP, even when the torque magnitudes are completely symmetric with voltage.

cond-mat.mes-hall↗

arXiv2007

Use of negative capacitance to provide a sub-threshold slope lower than 60 mV/decade

It is well known that conventional Field Effect Transistors (FET's) require a change in the channel potential of at least 60 mV at 300K to effect a change in the current by a factor of ten, and this minimum subthreshold slope S puts a lower limit of fundamental nature on the operating voltage and hence the power dissipation in standard FET based switches. Here we show that by replacing the standard insulator with a ferroelectric insulator of the right thickness it should be possible to implement a step-up voltage transformer that will amplify the gate voltage thus leading to values of S lower than 60 mV/decade and enabling low voltage/low power operation. The voltage transformer action can be understood intuitively as the result of an effective negative capacitance provided by the ferroelectric capacitor which arises from an internal positive feedback that in principle could be obtained from other microscopic mechanisms as well. Unlike other proposals to reduce S this involves no change in the basic physics of the FET and thus does not affect its current drive or impose other restrictions.

cond-mat.mes-hall↗

arXiv2006

Interacting Systems for Self-Correcting Low Power Switching

In this paper we first show that dynamic switching schemes can be used to reduce energy dissipation below the thermodynamic minimum of NkTlnr (N= number of state variables, 1/r=error probability), but only at the expense of the error immunity inherent in thermodynamic processes for which the final state is insensitive to the switching dynamics. It is further shown that, for a system which has internal feedback, e.g. nanomagnets, such that all N spins act in concert, it should be possible to switch with an energy dissipation of the order of kTlnr (considerably less than the thermodynamic limit of NkTlnr), while retaining an error immunity comparable to thermodynamic switching.

cond-mat.mes-hall↗

arXiv2006

Self Consistent NEGF-LLG Model for Spin-Torque Based Devices

We present here a self consistent solution of quantum transport, using the Non Equilibrium Green's Function (NEGF) method, and magnetization dynamics, using the Landau-Lifshitz-Gilbert (LLG) formulation. We have applied this model to study current induced magnetic switching due to `spin torque' in a device where the electronic transport is ballistic and the free magnetic layer is sandwiched between two anti-parallel ferromagnetic contacts. The device shows clear hysteretic current-voltage characteristics, at room temperature, with a sharp transition between the bistable states and hence can be used as a non-volatile memory. We show that the proposed design may allow reducing the switching current by an order of magnitude.

cond-mat.mes-hall↗

arXiv2005

Electrical Detection of Spin Excitations

The objective of this paper is to draw attention to a possible new approach for measuring the spin excitation spectrum of a spin array by placing it in intimate contact with the channel of a spin-valve device in an anti-parallel (AP) configuration. We show, using realistic device parameters, that the second derivative of the current $\partial^2I/\partial V^2$ should exhibit peaks whose location corresponds to the energy of excitation and whose height is its strength. The effect is maximum for ideal half metallic contacts in AP configuration but we show that even with contacts that are less than ideal, the spin signals can be extracted using a de-embedding scheme. Compared to existing techniques our proposal has three attractive features: (a) high sensitivity down to single spins, (b) high spatial resolution limited only by the wavefunctions of the individual spins and (c) a relatively common device structure to which a lot of current research is devoted

cond-mat.mes-hall↗