Searcharxiv⌕ Search

arXiv subjects

Scott A. Diddams

Publications and source records attributed to Scott A. Diddams.

At least 55 records · Page 3Linked to original sources
arXiv2023

Photonic chip-based low noise microwave oscillator

Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are difficult to further reduce in size and power consumption. Our work addresses this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division. Narrow linewidth self-injection locked integrated lasers are stabilized to a miniature Fabry-Pérot cavity, and the frequency gap between the lasers is divided with an efficient dark-soliton frequency comb. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc/Hz at 100 Hz offset frequency that decreases to -135 dBc/Hz at 10 kHz offset--values which are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems.

physics.optics↗
arXiv2023

Precision Doppler Shift Measurements with a Frequency Comb Calibrated Laser Heterodyne Radiometer

We report precision atmospheric spectroscopy of $CO_2$ using a laser heterodyne radiometer (LHR) calibrated with an optical frequency comb. Using the comb-calibrated LHR, we record spectra of atmospheric $CO_2$ near 1572.33 nm with a spectral resolution of 200 MHz using sunlight as a light source. The measured $CO_2$ spectra exhibit frequency shifts by approximately 11 MHz over the course of the five-hour measurement, and we show that these shifts are caused by Doppler effects due to wind along the spectrometer line of sight. The measured frequency shifts are in excellent agreement with an atmospheric model, and we show that our measurements track the wind-induced Doppler shifts with a relative frequency precision of 100 kHz (15 cm/s), equivalent to a fractional precision of a few parts in $10^{10}$. These results demonstrate that frequency-comb-calibrated LHR enables precision velocimetry that can be of use in applications ranging from climate science to astronomy.

physics.optics↗
arXiv2023

TOI-3984 A b and TOI-5293 A b: two temperate gas giants transiting mid-M dwarfs in wide binary systems

We confirm the planetary nature of two gas giants discovered by TESS to transit M dwarfs with stellar companions at wide separations. TOI-3984 A ($J=11.93$) is an M4 dwarf hosting a short-period ($4.353326 \pm 0.000005$ days) gas giant ($M_p=0.14\pm0.03~\mathrm{M_{J}}$ and $R_p=0.71\pm0.02~\mathrm{R_{J}}$) with a wide separation white dwarf companion. TOI-5293 A ($J=12.47$) is an M3 dwarf hosting a short-period ($2.930289 \pm 0.000004$ days) gas giant ($M_p=0.54\pm0.07~\mathrm{M_{J}}$ and $R_p=1.06\pm0.04~\mathrm{R_{J}}$) with a wide separation M dwarf companion. We characterize both systems using a combination of ground-based and space-based photometry, speckle imaging, and high-precision radial velocities from the Habitable-zone Planet Finder and NEID spectrographs. TOI-3984 A b ($T_{eq}=563\pm15$ K and $\mathrm{TSM}=138_{-27}^{+29}$) and TOI-5293 A b ($T_{eq}=675_{-30}^{+42}$ K and $\mathrm{TSM}=92\pm14$) are two of the coolest gas giants among the population of hot Jupiter-sized gas planets orbiting M dwarfs and are favorable targets for atmospheric characterization of temperate gas giants and three-dimensional obliquity measurements to probe system architecture and migration scenarios.

astro-ph.EP↗
arXiv2023

The unusual M-dwarf Warm Jupiter TOI-1899~b: Refinement of orbital and planetary parameters

TOI-1899 b is a rare exoplanet, a temperate Warm Jupiter orbiting an M-dwarf, first discovered by Cañas et al. (2020) from a TESS single-transit event. Using new radial velocities (RVs) from the precision RV spectrographs HPF and NEID, along with additional TESS photometry and ground-based transit follow-up, we are able to derive a much more precise orbital period of $P = 29.090312_{-0.000035}^{+0.000036}$ d, along with a radius of $R_p = 0.99 \pm 0.03~R_J$. We have also improved the constraints on planet mass, $M_p = 0.67 \pm 0.04~M_J$, and eccentricity, which is consistent with a circular orbit at 2$σ$ ($e = 0.044_{-0.027}^{+0.029}$). TOI-1899 b occupies a unique region of parameter space as the coolest known ($T_{eq} \approx$ 380 K) Jovian-sized transiting planet around an M-dwarf; we show that it has great potential to provide clues regarding the formation and migration mechanisms of these rare gas giants through transmission spectroscopy with JWST as well as studies of tidal evolution.

astro-ph.EP↗
arXiv2023

An In-Depth Look at TOI-3884b: a Super-Neptune Transiting a M4 Dwarf with Persistent Star Spot Crossings

We perform an in-depth analysis of the recently validated TOI-3884 system, an M4 dwarf star with a transiting super-Neptune. Using high precision light curves obtained with the 3.5 m Apache Point Observatory and radial velocity observations with the Habitable-zone Planet Finder (HPF), we derive a planetary mass of 32.6 +7.3 -7.4 Earth Masses and radius of 6.4 +/- 0.2 Earth Radii. We detect a distinct star spot crossing event occurring just after ingress and spanning half the transit for every transit. We determine this spot feature to be wavelength-dependent with the amplitude and duration evolving slightly over time. Best-fit star spot models show that TOI-3884b possesses a misaligned ($λ$ = 75 +\- 10 degrees) orbit which crosses a giant pole-spot. This system presents a rare opportunity for studies into the nature of both a misaligned super-Neptune and spot evolution on an active mid-M dwarf.

astro-ph.EP↗
arXiv2023

Visible to Ultraviolet Frequency Comb Generation in Lithium Niobate Nanophotonic Waveguides

The introduction of nonlinear nanophotonic devices to the field of optical frequency comb metrology has enabled new opportunities for low-power and chip-integrated clocks, high-precision frequency synthesis, and broad bandwidth spectroscopy. However, most of these advances remain constrained to the near-infrared region of the spectrum, which has restricted the integration of frequency combs with numerous quantum and atomic systems in the ultraviolet and visible. Here, we overcome this shortcoming with the introduction of multi-segment nanophotonic thin-film lithium niobate (LN) waveguides that combine engineered dispersion and chirped quasi-phase matching for efficient supercontinuum generation via the combination of $χ^{(2)}$ and $χ^{(3)}$ nonlinearities. With only 90 pJ of pulse energy at 1550 nm, we achieve gap-free frequency comb coverage spanning 330 to 2400 nm. The conversion efficiency from the near-infrared pump to the UV-Visible region of 350-550 nm is nearly 20%. Harmonic generation via the $χ^{(2)}$ nonlinearity in the same waveguide directly yields the carrier-envelope offset frequency and a means to verify the comb coherence at wavelengths as short as 350 nm. Our results provide an integrated photonics approach to create visible and UV frequency combs that will impact precision spectroscopy, quantum information processing, and optical clock applications in this important spectral window.

physics.optics↗
arXiv2023

20 GHz fiber-integrated femtosecond pulse and supercontinuum generation with a resonant electro-optic frequency comb

Frequency combs with mode spacing in the range of 10 to 20 gigahertz (GHz) are critical for increasingly important applications such as astronomical spectrograph calibration, high-speed dual-comb spectroscopy, and low-noise microwave generation. While electro-optic modulators and microresonators can provide narrowband comb sources at this repetition rate, a significant remaining challenge is a means to produce pulses with sufficient peak power to initiate nonlinear supercontinuum generation spanning hundreds of terahertz (THz) as required for self-referencing in these applications. Here, we provide a simple, robust, and universal solution to this problem using off-the-shelf polarization-maintaining (PM) amplification and nonlinear fiber components. This fiber-integrated approach for nonlinear temporal compression and supercontinuum generation is demonstrated with a resonant electro-optic frequency comb at 1550 nm. We show how to readily achieve pulses shorter than 60 fs at a repetition rate of 20 GHz and with peak powers in excess of 2 kW. The same technique can be applied to picosecond pulses at 10 GHz to demonstrate temporal compression by a factor of 9x yielding 50 fs pulses with peak power of 5.5 kW. These compressed pulses enable flat supercontinuum generation spanning more than 600 nm after propagation through multi-segment dispersion-tailored anomalous-dispersion highly nonlinear fiber (HNLF) or tantala waveguides. The same 10 GHz source can readily achieve an octave-spanning spectrum for self-referencing in dispersion-engineered silicon nitride waveguides. This simple all-fiber approach to nonlinear spectral broadening fills a critical gap for transforming any narrowband 10 to 20 GHz frequency comb into a broadband spectrum for a wide range of applications that benefit from the high pulse rate and require access to the individual comb modes.

physics.optics↗
arXiv2023

TOI-5205 b: A Short-period Jovian Planet Transiting a Mid-M Dwarf

We present the discovery of TOI-5205~b, a transiting Jovian planet orbiting a solar metallicity M4V star, which was discovered using Transiting Exoplanet Survey Satellite photometry and then confirmed using a combination of precise radial velocities, ground-based photometry, spectra, and speckle imaging. TOI-5205~b has one of the highest mass ratios for M dwarf planets with a mass ratio of almost 0.3$\%$, as it orbits a host star that is just $0.392 \pm 0.015$ \solmass{}. Its planetary radius is $1.03 \pm 0.03~R_J$, while the mass is $1.08 \pm 0.06~M_J$. Additionally, the large size of the planet orbiting a small star results in a transit depth of $\sim 7\%$, making it one of the deepest transits of a confirmed exoplanet orbiting a main-sequence star. The large transit depth makes TOI-5205~b a compelling target to probe its atmospheric properties, as a means of tracing the potential formation pathways. While there have been radial-velocity-only discoveries of giant planets around mid-M dwarfs, this is the first transiting Jupiter with a mass measurement discovered around such a low-mass host star. The high mass of TOI-5205~b stretches conventional theories of planet formation and disk scaling relations that cannot easily recreate the conditions required to form such planets.

astro-ph.EP↗
arXiv2023

Compact, Portable, Thermal-Noise-Limited Optical Cavity with Low Acceleration Sensitivity

We develop and demonstrate a compact (less than $6$ mL) portable Fabry-Pérot optical reference cavity. A laser locked to the cavity is thermal noise limited at $2\times10^{-14}$ fractional frequency stability. Broadband feedback control with an electro-optic modulator enables near thermal-noise-limited phase noise performance from $1$ Hz to $10$ kHz offset frequencies. The additional low vibration, temperature, and holding force sensitivity of our design makes it well suited for out-of-the-lab applications such as optically derived low noise microwave generation, compact and mobile optical atomic clocks, and environmental sensing through deployed fiber networks.

physics.optics↗
arXiv2022

TOI-3757 b: A low density gas giant orbiting a solar-metallicity M dwarf

We present the discovery of a new Jovian-sized planet, TOI-3757 b, the lowest density planet orbiting an M dwarf (M0V). It orbits a solar-metallicity M dwarf discovered using TESS photometry and confirmed with precise radial velocities (RV) from HPF and NEID. With a planetary radius of $12.0^{+0.4}_{-0.5}$ $R_{\oplus}$ and mass of $85.3^{+8.8}_{-8.7}$ $M_{\oplus}$, not only does this object add to the small sample of gas giants ($\sim 10$) around M dwarfs, but also, its low density ($ρ=$ $0.27^{+0.05}_{-0.04}$ $\textrm{g~cm}^{-3}$) provides an opportunity to test theories of planet formation. We present two hypotheses to explain its low density; first, we posit that the low metallicity of its stellar host ($\sim$ 0.3 dex lower than the median metallicity of M dwarfs hosting gas giants) could have played a role in the delayed formation of a solid core massive enough to initiate runaway accretion. Second, using the eccentricity estimate of $0.14 \pm 0.06$ we determine it is also plausible for tidal heating to at least partially be responsible for inflating the radius of TOI-3757b b. The low density and large scale height of TOI-3757 b makes it an excellent target for transmission spectroscopy studies of atmospheric escape and composition (TSM $\sim$ 190). We use HPF to perform transmission spectroscopy of TOI-3757 b using the helium 10830 Å~ line. Doing this, we place an upper limit of 6.9 \% (with 90\% confidence) on the maximum depth of the absorption from the metastable transition of He at $\sim$ 10830 Å, which can help constraint the atmospheric mass loss rate in this energy limited regime.

astro-ph.EP↗
arXiv2022

TOI-3714 b and TOI-3629 b: Two gas giants transiting M dwarfs confirmed with HPF and NEID

We confirm the planetary nature of two gas giants discovered by TESS to transit M dwarfs. TOI-3714 ($V=15.24,~J=11.74$) is an M2 dwarf hosting a hot Jupiter ($M_p=0.70 \pm 0.03~\mathrm{M_J}$ and $R_p=1.01 \pm 0.03~\mathrm{R_J}$) on an orbital period of $2.154849 \pm 0.000001$ days with a resolved white dwarf companion. TOI-3629 ($V=14.63,~J=11.42$) is an M1 dwarf hosting a hot Jupiter ($M_p=0.26 \pm 0.02~\mathrm{M_J}$ and $R_p=0.74 \pm 0.02~\mathrm{R_J}$) on an orbital period of $3.936551_{-0.000006}^{+0.000005}$ days. We characterize each transiting companion using a combination of ground-based and space-based photometry, speckle imaging, and high-precision velocimetry from the Habitable-zone Planet Finder and the NEID spectrographs. With the discovery of these two systems, there are now nine M dwarfs known to host transiting hot Jupiters. Among this population, TOI-3714 b ($T_{eq}=750\pm20$ K and $\mathrm{TSM}=98\pm7$) and TOI-3629 b ($T_{eq}=690\pm20$ K and $\mathrm{TSM}=80\pm9$) are warm gas giants amenable to additional characterization with transmission spectroscopy to probe atmospheric chemistry and, for TOI-3714, obliquity measurements to probe formation scenarios.

astro-ph.EP↗
arXiv2022

Micro-fabricated mirrors with finesse exceeding one million

The Fabry-Pérot resonator is one of the most widely used optical devices, enabling scientific and technological breakthroughs in diverse fields including cavity QED, optical clocks, precision length metrology and spectroscopy. Though resonator designs vary widely, all high-end applications benefit from mirrors with the lowest loss and highest finesse possible. Fabrication of the highest finesse mirrors relies on centuries-old mechanical polishing techniques, which offer losses at the part-per-million (ppm) level. However, no existing fabrication techniques are able to produce high finesse resonators with the large range of mirror geometries needed for scalable quantum devices and next-generation compact atomic clocks. In this paper, we introduce a new and scalable approach to fabricate mirrors with ultrahigh finesse ($\geq 10^{6}$) and user-defined radius of curvature spanning four orders of magnitude ($10^{-4}-10^{0}$ m). We employ photoresist reflow and reactive ion etching to shape and transfer mirror templates onto a substrate while maintaining sub-Angstrom roughness. This substrate is coated with a dielectric stack and used to create arrays of compact Fabry-Pérot resonators with finesse values as high as 1.3 million and measured excess loss $<$ 1 ppm. Optical ringdown measurements of 43 devices across 5 substrates reveal that the fabricated cavity mirrors -- with both small and large radii of curvature -- produce an average coating-limited finesse of 1.05 million. This versatile new approach opens the door to scalable fabrication of high-finesse miniaturized Fabry-Pérot cavities needed for emerging quantum optics and frequency metrology technologies.

physics.optics↗
arXiv2022

High-sensitivity Frequency Comb Carrier-Envelope-Phase Metrology in Solid State High Harmonic Generation

Non-perturbative and phase-sensitive light-matter interactions have led to the generation of attosecond pulses of light and the control electrical currents on the same timescale. Traditionally, probing these effects via high harmonic generation has involved complicated lasers and apparatuses to generate the few-cycle and high peak power pulses needed to obtain and measure spectra that are sensitive to the phase of the light wave. Instead, we show that nonlinear effects dependent on the carrier-envelope phase can be accessed in solid state crystals with simple low-energy frequency combs that we combine with high-sensitivity demodulation techniques to measure harmonic spectral modulations. Central to this advance is the use of a scalable 100 MHz Erbium-fiber frequency comb at 1550 nm to produce 10 nJ, 20 fs pulses which are focused to the TW/cm2 level. In a single pass through a 500 μm ZnO crystal this yields harmonic spectra as short as 200 nm. With this system, we introduce a technique of carrier-envelope amplitude modulation spectroscopy (CAMS) and use it to characterize the phase-sensitive modulation of the ultraviolet harmonics with 85 dB signal-to-noise ratio. We further verify the non-perturbative nature of the harmonic generation through polarization gating of the driving pulse to increase the effects of the carrier-envelope phase. Our work demonstrates robust and ultra-sensitive methods for generating and characterizing harmonic generation at 100 MHz rates that should provide advantages in the study of attosecond nonlinear processes in solid state systems. Additionally, as a simple and low-noise frequency comb, this broadband source will be useful for precision dual-comb spectroscopy of a range of physical systems across the ultraviolet and visible spectral regions (200 - 650 nm).

physics.optics↗
arXiv2022

The Warm Neptune GJ 3470b has a Polar Orbit

The warm Neptune GJ 3470b transits a nearby ($d=29$pc) bright slowly rotating M1.5-dwarf star. Using spectroscopic observations during two transits with the newly commissioned NEID spectrometer on the WIYN 3.5m Telescope at Kitt Peak Observatory, we model the classical Rossiter-Mclaughlin effect yielding a sky-projected obliquity of $λ=98_{-12}^{+15\:\circ}$ and a $v \sin i = 0.85_{-0.33}^{+0.27}$km/s. Leveraging information about the rotation period and size of the host star, our analysis yields a true obliquity of $ψ=95_{-8}^{+9\:\circ}$, revealing that GJ 3470b is on a polar orbit. Using radial velocities from HIRES, HARPS and the Habitable-zone Planet Finder, we show that the data are compatible with a long-term RV slope of $\dotγ = -0.0022 \pm 0.0011$m/s/day over a baseline of 12.9 years. If the RV slope is due to acceleration from another companion in the system, we show that such a companion is capable of explaining the polar and mildly eccentric orbit of GJ 3470b using two different secular excitation models. The existence of an outer companion can be further constrained with additional RV observations, Gaia astrometry, and future high-contrast imaging observations. Lastly, we show that tidal heating from GJ 3470b's mild eccentricity has most likely inflated the radius of GJ 3470b by a factor of $\sim$1.5-1.7, which could help account for its evaporating atmosphere.

astro-ph.EP↗
arXiv2022

TOI-1696 and TOI-2136: Constraining the Masses of Two Mini-Neptunes with HPF

We present the validation of two planets orbiting M dwarfs, TOI-1696b and TOI-2136b. Both planets are mini-Neptunes orbiting nearby stars, making them promising prospects for atmospheric characterization with the James Webb Space Telescope. We validated the planetary nature of both candidates using high contrast imaging, ground-based photometry, and near-infrared radial velocities. Adaptive Optics images were taken using the ShARCS camera on the 3 m Shane Telescope. Speckle images were taken using the NN-Explore Exoplanet Stellar Speckle Imager on the WIYN 3.5 m telescope. Radii and orbital ephemerides were refined using a combination of TESS, the diffuser-assisted ARCTIC imager on the 3.5m ARC telescope at Apache Point Observatory, and the 0.6 m telescope at Red Buttes Observatory. We obtained radial velocities using the Habitable-Zone Planet Finder on the 10 m Hobby-Eberly Telescope, which enabled us to place upper limits on the masses of both transiting planets. TOI-1696b (P = 2.5 days; R$_{p}$ = 3.24 R$_{\oplus}$; M$_{p}$ $<$ 56.6 M$_{\oplus}$) falls into a sparsely-populated region of parameter space considering its host star's temperature (T$_{\rm{eff}}$ = 3168 K, M4.5), as planets of its size are quite rare around mid to late M dwarfs. On the other hand, TOI-2136b (P = 7.85 days; R$_{p}$ = 2.09 R$_{\oplus}$; M$_{p}$ $<$ 15.0 M$_{\oplus}$) is an excellent candidate for atmospheric follow-up with JWST.

astro-ph.EP↗
arXiv2022

Chip-Based Laser with 1 Hertz Integrated Linewidth

Lasers with hertz-level linewidths on timescales up to seconds are critical for precision metrology, timekeeping, and manipulation of quantum systems. Such frequency stability typically relies on bulk-optic lasers and reference cavities, where increased size is leveraged to improve noise performance, but with the trade-off of cost, hand assembly, and limited application environments. On the other hand, planar waveguide lasers and cavities exploit the benefits of CMOS scalability but are fundamentally limited from achieving hertz-level linewidths at longer times by stochastic noise and thermal sensitivity inherent to the waveguide medium. These physical limits have inhibited the development of compact laser systems with frequency noise required for portable optical clocks that have performance well beyond conventional microwave counterparts. In this work, we break this paradigm to demonstrate a compact, high-coherence laser system at 1548 nm with a 1 s integrated linewidth of 1.1 Hz and fractional frequency instability less than 10$^{-14}$ from 1 ms to 1 s. The frequency noise at 1 Hz offset is suppressed by 11 orders of magnitude from that of the free-running diode laser down to the cavity thermal noise limit near 1 Hz$^2$/Hz, decreasing to 10$^{-3}$ Hz$^2$/Hz at 4 kHz offset. This low noise performance leverages wafer-scale integrated lasers together with an 8 mL vacuum-gap cavity that employs micro-fabricated mirrors with sub-angstrom roughness to yield an optical $Q$ of 11.8 billion. Significantly, all the critical components are lithographically defined on planar substrates and hold the potential for parallel high-volume manufacturing. Consequently, this work provides an important advance towards compact lasers with hertz-level linewidths for applications such as portable optical clocks, low-noise RF photonic oscillators, and related communication and navigation systems.

physics.optics↗
arXiv2022

Thermal noise-limited laser stabilization to an 8 mL volume Fabry-Pérot reference cavity with microfabricated mirrors

Lasers stabilized to vacuum-gap Fabry-Pérot optical reference cavities display extraordinarily low noise and high stability, with linewidths much less than 1 Hz. These lasers can expand into new applications and ubiquitous use with the development of compact, portable cavities that are manufacturable at scale. Here we demonstrate an 8 mL volume Fabry-Pérot cavity constructed with mirrors that are fabricated lithographically with finesse near 1 million. A laser locked to the cavity exhibits phase noise limited by the cavity thermal noise for offset frequencies ranging from 1 Hz to $\approx$ 1 kHz, with a fractional frequency stability of 7$\times$10$^{-15}$ at 1 second. Furthermore, the use of microfabricated mirrors allows us to expand the design space of centimeter-scale cavities, and we explore the noise implications of pushing towards cavity volumes of 2 mL or less.

physics.optics↗