arXiv subjects

Scott A. Diddams

Publications and source records attributed to Scott A. Diddams.

At least 37 records · Page 2Linked to original sources

arXiv2024

Searching for GEMS: TOI-5688 A b, a low-density giant orbiting a high-metallicity early M-dwarf

We present the discovery of a low-density planet orbiting the high-metallicity early M-dwarf TOI-5688 A b. This planet was characterized as part of the search for transiting giant planets ($R \gtrsim8$ M${}_\oplus$) through the Searching for GEMS (Giant Exoplanets around M-dwarf Stars) survey. The planet was discovered with the Transiting Exoplanet Survey Satellite (TESS), and characterized with ground-based transits from Red Buttes Observatory (RBO), the Table Mountain Observatory of Pomona College, and radial velocity (RV) measurements with the Habitable-Zone Planet Finder (HPF) on the 10 m Hobby Eberly Telescope (HET) and NEID on the WIYN 3.5 m telescope. From the joint fit of transit and RV data, we measure a planetary mass and radius of $124\pm24$ M$_\oplus$ ($0.39\pm0.07$ M${}_J$) and $10.4\pm0.7$ R$_\oplus$ ($0.92\pm0.06$ R${}_J$) respectively. The spectroscopic and photometric analysis of the host star TOI-5688 A shows that it is a metal-rich ([Fe/H] $ = 0.47\pm0.16$ dex) M2V star, favoring the core-accretion formation pathway as the likely formation scenario for this planet. Additionally, Gaia astrometry suggests the presence of a wide-separation binary companion, TOI-5688 B, which has a projected separation of $\sim5"$ (1110 AU) and is an M4V, making TOI-5688 A b part of the growing number of GEMS in wide-separation binary systems.

astro-ph.EP↗

arXiv2024

Searching for GEMS: Two Super-Jupiters around M-dwarfs -- Signatures of Instability or Accretion?

We present the discovery of TOI-6303b and TOI-6330b, two massive transiting super-Jupiters orbiting a M0 and a M2 star respectively, as part of the Searching for GEMS survey. These were detected by TESS and then confirmed via ground-based photometry and radial velocity observations with the Habitable-zone Planet Finder (HPF). TOI-6303b has a mass of 7.84 +/- 0.31 MJ, a radius of 1.03 +/- 0.06 RJ , and an orbital period of 9.485 days. TOI-6330b has a mass of 10.00 +/- 0.31 MJ , a radius of 0.97 +/- 0.03 RJ , and an orbital period of 6.850 days. We put these planets in context of super-Jupiters around M-dwarfs discovered from radial-velocity surveys, as well as recent discoveries from astrometry. These planets have masses that can be attributed to two dominant planet formation mechanisms - gravitational instability and core-accretion. Their masses necessitate massive protoplanetary disks that should either be gravitationally unstable, i.e. forming through gravitational instability, or be amongst some of the most massive protoplanetary disks to form objects through core-accretion. We also discuss the eccentricity distribution of these objects, as a potential indicator of their formation and evolutionary mechanisms.

astro-ph.EP↗

arXiv2024

Frequency Comb Calibrated Laser Heterodyne Radiometry for Precision Radial Velocity Measurements

Disk-integrated observations of the Sun provide a unique vantage point to explore stellar activity and its effect on measured radial velocities. Here, we report a new approach for disk-integrated solar spectroscopy and evaluate its capabilities for solar radial velocity measurements. Our approach is based on a near-infrared laser heterodyne radiometer (LHR) combined with an optical frequency comb calibration, and we show that this combination enables precision, disk-integrated solar spectroscopy with high spectral resolution (~800,000), high signal-to-noise ratio (~2,600), and absolute frequency accuracy. We use the comb-calibrated LHR to record spectra of the solar Fe I 1565 nm transition over a six-week period. We show that our measurements reach sub-meter-per-second radial velocity precision over a single day, and we use daily measurements of the absolute line center to assess the long-term stability of the comb-calibrated LHR approach. We use this long-duration dataset to quantify the principal uncertainty sources that impact the measured radial velocities, and we discuss future modifications that can further improve this approach in studies of stellar variability and its impact on radial velocity measurements.

astro-ph.SR↗

arXiv2024

Harnessing micro-Fabry-Perot reference cavities in photonic integrated circuits

Compact photonic systems that offer high frequency stability and low noise are of increasing importance to applications in precision metrology, quantum computing, communication, and advanced sensing technologies. However, on-chip resonators comprised of dielectrics cannot match the frequency stability and noise characteristics of Fabry-Perot cavities, whose electromagnetic modes live almost entirely in vacuum. In this study, we present a novel strategy to interface micro-fabricated Fabry-Perot cavities with photonic integrated circuits to realize compact, high-performance integrated systems. Using this new integration approach, we demonstrate self-injection locking of an on-chip laser to a milimeter-scale vacuum-gap Fabry-Perot using a circuit interface that transforms the reflected cavity response to enable efficient feedback to the laser. This system achieves a phase noise of -97 dBc/Hz at 10 kHz offset frequency, a fractional frequency stability of 5*10-13 at 10 ms, a 150 Hz 1/pi integral linewidth, and a 35 mHz fundamental linewidth. We also present a complementary integration strategy that utilizes a vertical emission grating coupler and a back-reflection cancellation circuit to realize a fully co-integrated module that effectively redirects the reflected signals and isolates back-reflections with a 10 dB suppression ratio, readily adaptable for on-chip PDH locking. Together, these demonstrations significantly enhance the precision and functionality of RF photonic systems, paving the way for continued advancements in photonic applications.

physics.optics↗

arXiv2024

Searching for GEMS: TOI-6383Ab, a giant planet transiting an M3-dwarf star in a binary system

We report on the discovery of a transiting giant planet around the 3500 K M3-dwarf star TOI-6383A located 172 pc from Earth. It was detected by the Transiting Exoplanet Survey Satellite (TESS) and confirmed by a combination of ground-based follow-up photometry and precise radial velocity measurements. This planet has an orbital period of $\sim$1.791 days, mass of 1.040$\pm$0.094 $M_J$ and a radius of 1d.008$^{+0.036}_{-0.033} ~R_J$, resulting in a mean bulk density of 1.26$^{+0.18}_{-0.17}$ g cm$^{-3}$. TOI-6383A has an M-dwarf companion star, TOI-6383B, which has a stellar effective temperature $T_{eff}$ $\sim$ 3100 K and a projected orbital separation of 3100 AU. TOI-6383A is a low-mass dwarf star hosting a giant planet and is an intriguing object for planetary evolution studies due to its high planet-to-star mass ratio. This discovery is part of the \textit{Searching for Giant Exoplanets around M-dwarf Stars (GEMS)} Survey, intending to provide robust and accurate estimates of the occurrence of GEMS and the statistics on their physical and orbital parameters. This paper presents an interesting addition to the small number of confirmed GEMS, particularly notable since its formation necessitates massive, ust-rich protoplanetary discs and high accretion efficiency ($>$ 10\%).

astro-ph.EP↗

arXiv2024

Dual-Comb Photothermal Microscopy

We introduce a new parallelized approach to photothermal microscopy that utilizes mid-infrared dual-comb lasers, enabling simultaneous measurements at hundreds of wavelengths. This technology allows for high-speed, label-free chemical identification with super-resolution infrared imaging, overcoming the limitations of slow, single-wavelength-laser methods.

physics.optics↗

arXiv2024

Squeezed dual-comb spectroscopy

Laser spectroscopy and interferometry have provided an unparalleled view into the fundamental nature of matter and the universe through ultra-precise measurements of atomic transition frequencies and gravitational waves. Optical frequency combs have expanded metrology capabilities by phase-coherently bridging radio frequency and optical domains to enable traceable high-resolution spectroscopy across bandwidths greater than hundreds of terahertz. However, quantum mechanics limits the measurement precision achievable with laser frequency combs and traditional laser sources, ultimately impacting fundamental interferometry and spectroscopy. Squeezing the distribution of quantum noise to enhance measurement precision of either the amplitude or phase quadrature of an optical field leads to significant measurement improvements with continuous wave lasers. In this work, we generate bright amplitude-squeezed frequency comb light and apply it to molecular spectroscopy using interferometry that leverages the high-speed and broad spectral coverage of the dual-comb technique. Using the Kerr effect in nonlinear optical fiber, the amplitude quadrature of a frequency comb centered at 1560 nm is squeezed by >3 dB over a 2.5 THz of bandwidth that includes 2500 comb teeth spaced by 1 GHz. Interferometry with a second coherent state frequency comb yields mode-resolved spectroscopy of hydrogen sulfide gas with a signal-to-noise ratio (SNR) nearly 3 dB beyond the shot noise limit, taking full metrological advantage of the amplitude squeezing when the electrical noise floor is considered. The quantum noise reduction leads to a two-fold quantum speedup in the determination of gas concentration, with impact for fast, broadband, and high SNR ratio measurements of multiple species in dynamic chemical environments.

physics.optics↗

arXiv2024

Searching for GEMS: Characterizing Six Giant Planets around Cool Dwarfs

Transiting giant exoplanets around M-dwarf stars (GEMS) are rare, owing to the low-mass host stars. However, the all-sky coverage of TESS has enabled the detection of an increasingly large number of them to enable statistical surveys like the \textit{Searching for GEMS} survey. As part of this endeavour, we describe the observations of six transiting giant planets, which includes precise mass measurements for two GEMS (K2-419Ab, TOI-6034b) and statistical validation for four systems, which includes validation and mass upper limits for three of them (TOI-5218b, TOI-5616b, TOI-5634Ab), while the fourth one -- TOI-5414b is classified as a `likely planet'. Our observations include radial velocities from the Habitable-zone Planet Finder on the Hobby-Eberly Telescope, and MAROON-X on Gemini-North, along with photometry and high-contrast imaging from multiple ground-based facilities. In addition to TESS photometry, K2-419Ab was also observed and statistically validated as part of the K2 mission in Campaigns 5 and 18, which provides precise orbital and planetary constraints despite the faint host star and long orbital period of $\sim 20.4$ days. With an equilibrium temperature of only 380 K, K2-419Ab is one of the coolest known well-characterized transiting planets. TOI-6034 has a late F-type companion about 40\arcsec~away, making it the first GEMS host star to have an earlier main-sequence binary companion. These confirmations add to the existing small sample of confirmed transiting GEMS.

astro-ph.EP↗

arXiv2024

Mid-Infrared Hyperspectral Microscopy with Broadband 1-GHz Dual Frequency Combs

Mid-infrared microscopy is an important tool for biological analyses, allowing a direct probe of molecular bonds in their low energy landscape. In addition to the label-free extraction of spectroscopic information, the application of broadband sources can provide a third dimension of chemical specificity. However, to enable widespread deployment, mid-infrared microscopy platforms need to be compact and robust while offering high speed, broad bandwidth and high signal-to-noise ratio (SNR). In this study, we experimentally showcase the integration of a broadband, high-repetition-rate dual-comb spectrometer (DCS) in the mid-infrared range with a scanning microscope. We employ a set of 1-GHz mid-infrared frequency combs, demonstrating their capability for high-speed and broadband hyperspectral imaging of polymers and ovarian tissue. The system covers 1000 $\mathrm{cm^{-1}}$ at $\mathrm{ν_c=2941 \; cm^{-1}}$ with 12.86 kHz spectra acquisition rate and 5 $\mathrm{μm}$ spatial resolution. Taken together, our experiments and analysis elucidate the trade-off between bandwidth and speed in DCS as it relates to microscopy. This provides a roadmap for the future advancement and application of high-repetition-rate DCS hyperspectral imaging.

physics.optics↗

arXiv2024

TOI-2015b: A Warm Neptune with Transit Timing Variations Orbiting an Active mid M Dwarf

We report the discovery of a close-in ($P_{\mathrm{orb}} = 3.349\:\mathrm{days}$) warm Neptune with clear transit timing variations (TTVs) orbiting the nearby ($d=47.3\:\mathrm{pc}$) active M4 star, TOI-2015. We characterize the planet's properties using TESS photometry, precise near-infrared radial velocities (RV) with the Habitable-zone Planet Finder (HP) Spectrograph, ground-based photometry, and high-contrast imaging. A joint photometry and RV fit yields a radius $R_p~=~3.37_{-0.20}^{+0.15} \:\mathrm{R_\oplus}$, mass $m_p~=~16.4_{-4.1}^{+4.1}\:\mathrm{M_\oplus}$, and density $ρ_p~=~2.32_{-0.37}^{+0.38} \:\mathrm{g cm^{-3}}$ for TOI-2015b, suggesting a likely volatile-rich planet. The young, active host star has a rotation period of $P_{\mathrm{rot}}~=~8.7 \pm~0.9~\mathrm{days}$ and associated rotation-based age estimate of $1.1~\pm~0.1\:\mathrm{Gyr}$. Though no other transiting planets are seen in the TESS data, the system shows clear TTVs of super period $P_{\mathrm{sup}}~\approx~430\:\mathrm{days}$ and amplitude $\sim$$100\:\mathrm{minutes}$. After considering multiple likely period ratio models, we show an outer planet candidate near a 2:1 resonance can explain the observed TTVs while offering a dynamically stable solution. However, other possible two-planet solutions -- including 3:2 and 4:3 resonance -- cannot be conclusively excluded without further observations. Assuming a 2:1 resonance in the joint TTV-RV modeling suggests a mass of $m_b~=~13.3_{-4.5}^{+4.7}\:\mathrm{M_\oplus}$ for TOI-2015b and $m_c~=~6.8_{-2.3}^{+3.5}\:\mathrm{M_\oplus}$ for the outer candidate. Additional transit and RV observations will be beneficial to explicitly identify the resonance and further characterize the properties of the system.

astro-ph.EP↗

arXiv2024

Photonic Millimeter-wave Generation Beyond the Cavity Thermal Limit

Next-generation communications, radar and navigation systems will extend and exploit the higher bandwidth of the millimeter-wave domain for increased communication data rates as well as radar with higher sensitivity and increased spatial resolution. However, realizing these advantages will require the generation of millimeter-wave signals with low phase noise in simple and compact form-factors. The rapidly developing field of photonic integration addresses this challenge and provides a path toward simplified and portable, low-noise mm-wave generation for these applications. We leverage these advances by heterodyning two silicon photonic chip lasers, phase-locked to the same miniature Fabry-Perot (F-P) cavity to demonstrate a simple framework for generating low-noise millimeter-waves with phase noise below the thermal limit of the F-P cavity. Specifically, we generate 94.5 GHz and 118.1 GHz millimeter-wave signals with phase noise of -117 dBc/Hz at 10 kHz offset, decreasing to -120 dBc/Hz at 40 kHz offset, a record low value for such photonic devices. We achieve this with existing technologies that can be integrated into a platform less than $\approx$ 10 mL in volume. Our work illustrates the significant potential and advantages of low size, weight, and power (SWaP) photonic-sourced mm-waves for communications and sensing.

physics.optics↗

arXiv2024

Quantifying broadband chromatic drifts in Fabry-Perot resonators for exoplanet science

The possibility of an Earth-Sun analog beyond our solar system is one of the most longstanding questions in science. At present, answering this question embodies an extremely difficult measurement problem that requires multiple coordinated advances in astronomical telescopes, fiber optics, precision spectrographs, large format detector arrays, and advanced data processing. Taken together, addressing this challenge will require the measurement and calibration of shifts in stellar spectra at the 10^-10 level over multi-year periods. The potential for such precision has recently been advanced by the introduction of laser frequency combs (LFCs) to the field of precision astronomical spectroscopy. However, the expense, complexity and lack of full spectral coverage of LFCs has limited their widespread use and ultimate impact. To address this issue, we explore simple and robust white-light-illuminated Fabry-Perot (FP) etalons as spectral calibrators for precise radial velocity measurements. We track the frequencies of up to 13,000 etalon modes of the installed FPs from two state-of-the-art astronomical spectrographs. Combining these measurements with modeling, we trace unexpected chromatic variations of the FP modes to sub-picometer changes in the dielectric layers of the broad bandwidth FP mirrors. This yields the determination of the frequencies of the FP modes with precision approaching 10^-11/day, equivalent to a radial velocity (RV) Doppler shift of 3 mm/s/day. These results represent critical progress in precision RV measurements on two fronts: first, they make FP etalons a more powerful stand-alone calibration tool, and second, they demonstrate the capability of LFCs to extend cm/s level RV measurement precision over periods approaching a year. Together, these advances highlight a path to achieving spectroscopic calibration at levels that will be critical for finding earths like our own.

physics.optics↗

arXiv2024

Tunable X-band opto-electronic synthesizer with ultralow phase noise

Modern communication, navigation, and radar systems rely on low noise and frequency-agile microwave sources. In this application space, photonic systems provide an attractive alternative to conventional microwave synthesis by leveraging high spectral purity lasers and optical frequency combs to generate microwaves with exceedingly low phase noise. However, these photonic techniques suffer from a lack of frequency tunability, and also have substantial size, weight, and power requirements that largely limit their use to laboratory settings. In this work, we address these shortcomings with a hybrid opto-electronic approach that combines simplified optical frequency division with direct digital synthesis to produce tunable low-phase-noise microwaves across the entire X-band. This results in exceptional phase noise at 10 GHz of -156 dBc/Hz at 10 kHz offset and fractional frequency instability of 1x10^-13 at 0.1 s. Spot tuning away from 10 GHz by 500 MHz, 1 GHz, and 2 GHz, yields phase noise at 10 kHz offset of -150 dBc/Hz, -146 dBc/Hz, and -140 dBc/Hz, respectively. The synthesizer architecture is fully compatible with integrated photonic implementations that will enable a versatile microwave source in a chip-scale package. Together, these advances illustrate an impactful and practical synthesis technique that shares the combined benefits of low timing noise provided by photonics and the frequency agility of established digital synthesis.

physics.optics↗

arXiv2024

A Quantum Theory of Temporally Mismatched Homodyne Measurements with Applications to Optical Frequency Comb Metrology

The fields of precision timekeeping and spectroscopy increasingly rely on optical frequency comb interferometry. However, comb-based measurements are not described by existing quantum theory because they exhibit both large mode mismatch and finite strength local oscillators. To establish this quantum theory, we derive measurement operators for homodyne detection with arbitrary mode overlap. These operators are a combination of quadrature and intensity-like measurements, which inform a filter that maximizes the quadrature measurement signal-to-noise ratio. Furthermore, these operators establish a foundation to extend frequency-comb interferometry to a wide range of scenarios, including metrology with nonclassical states of light.

quant-ph↗

arXiv2023

A Multi-Harmonic NIR-UV Dual-Comb Spectrometer

Dual-comb spectroscopy in the ultraviolet (UV) and visible would enable broad bandwidth electronic spectroscopy with unprecedented frequency resolution. However, there are significant challenges in generation, detection and processing of dual-comb data that have restricted its progress in this spectral region. In this work, we leverage robust 1550 nm few-cycle pulses to generate frequency combs in the UV-visible. We couple this source to a wavelength multiplexed dual-comb spectrometer and simultaneously retrieve 100 MHz comb-mode-resolved spectra over three distinct harmonics spanning 380-800 nm. The experiments highlight the path to continuous dual-comb coverage spanning 200-750 nm, offering extensive access to electronic transitions in atoms, molecules, and solids.

physics.optics↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2023

A Novel Approach to Interface High-Q Fabry-Pérot Resonators with Photonic Circuits

The unique benefits of Fabry-Pérot resonators as frequency-stable reference cavities and as an efficient interface between atoms and photons make them an indispensable resource for emerging photonic technologies. To bring these performance benefits to next-generation communications, computation, and timekeeping systems, it will be necessary to develop strategies to integrate compact Fabry-Pérot resonators with photonic integrated circuits. In this paper, we demonstrate a novel reflection cancellation circuit that utilizes a numerically optimized multi-port polarization-splitting grating coupler to efficiently interface high-finesse Fabry-Pérot resonators with a silicon photonic circuit. This circuit interface produces spatial separation of the incident and reflected waves, as required for on-chip Pound-Drever-Hall frequency locking, while also suppressing unwanted back reflections from the Fabry-Pérot resonator. Using inverse design principles, we design and fabricate a polarization-splitting grating coupler that achieves 55% coupling efficiency. This design realizes an insertion loss of 5.8 dB for the circuit interface and more than 9 dB of back reflection suppression, and we demonstrate the versatility of this system by using it to interface several reflective off-chip devices.

physics.optics↗

arXiv2023

Stable fiber-illumination for extremely precise radial velocities with NEID

NEID is a high-resolution red-optical precision radial velocity (RV) spectrograph recently commissioned at the WIYN 3.5 m telescope at Kitt Peak National Observatory, Arizona, USA. NEID has an extremely stable environmental control system, and spans a wavelength range of 380 to 930 nm with two observing modes: a High Resolution (HR) mode at R $\sim$ 112,000 for maximum RV precision, and a High Efficiency (HE) mode at R $\sim$ 72,000 for faint targets. In this manuscript we present a detailed description of the components of NEID's optical fiber feed, which include the instrument, exposure meter, calibration system, and telescope fibers. Many parts of the optical fiber feed can lead to uncalibratable RV errors, which cannot be corrected for using a stable wavelength reference source. We show how these errors directly cascade down to performance requirements on the fiber feed and the scrambling system. We detail the design, assembly, and testing of each component. Designed and built from the bottom-up with a single-visit instrument precision requirement of 27 $\textrm{cm~s}^{-1}$, close attention was paid to the error contribution from each NEID subsystem. Finally, we include the lab and on-sky tests performed during instrument commissioning to test the illumination stability, and discuss the path to achieving the instrumental stability required to search for a true Earth twin around a Solar-type star.

astro-ph.IM↗