SearcharxivSearch

arXiv subjects

Sebastian Lehmann

Publications and source records attributed to Sebastian Lehmann.

At least 19 recordsLinked to original sources

Self-selective growth of GaAs1-xBix on GaAs zinc blende/wurtzite nanowire heterostructures

Site-selective nanostructure growth and material incorporation at the atomic scale offer a promising pathway for engineering quantum materials and nanodevices. Here, GaAs nanowires (NWs) with an axial heterostructure of alternating zinc blende (Zb) and wurtzite (Wz) crystal phases are employed as templates for site-selective Ga and Bi overgrowth. Using X-ray photoemission electron microscopy (XPEEM) with nanoscale spatial resolution, we map elemental distribution and local chemical bonding to reveal the incorporation behavior of Bi atoms in {110} Zb and {11-20} Wz facets. Bi incorporation proceeds through an anion-exchange process, where Bi atoms replace As, forming local Ga-Bi bonds and producing a thin GaAs1-xBix shell. We observe crystal-phase-dependent Bi incorporation, with higher Bi concentration in the Zb segments than in the neighboring Wz segments within the same NW. Furthermore, the Zb segment with higher Bi content exhibits reduced susceptibility to oxidation compared with the Wz segment, resulting in increased Ga-oxide in the Wz surfaces. This study highlights GaAs NW Zb/Wz heterostructures as a template for controlled growth of GaBi and GaAs1-xBix nanostructures with tailored functionalities for quantum applications

cond-mat.mtrl-sci

Cathodoluminescence Analysis of Defects and Grain Boundaries in Zn3P2 Thin Films Grown on Graphene by MOVPE and MBE

Zn3P2 is a promising earth-abundant absorber for thin-film photovoltaics, yet its development is hindered by the lack of lattice-matched substrates, its incompatible thermal expansion coefficient, and a complex defect landscape. Here, we demonstrate the quasi-van der Waals epitaxy of Zn3P2 on graphene by metal-organic vapour phase epitaxy (MOVPE) and directly link the density of antiphase boundaries to optical emission modulation using correlative electron microscopy and cathodoluminescence (CL). Moreover, it is observed through CL that grain boundaries act as non-radiative sinks for excited charge carriers. The effect extends several micrometres into the grains, making grain boundaries detrimental to the applicability of Zn3P2 in read devices. Further comparison with molecular beam epitaxy grown films reveals the suppression of strain-related sub-bandgap emission in MOVPE-grown material. Overall, quasi-van der Waals epitaxy of Zn3P2 by MOVPE resulted in larger grains and improved material quality. In addition, these results directly link extended defects to recombination pathways in Zn3P2 and highlight grain-size control as a key strategy for improving earth-abundant photovoltaic absorbers.

cond-mat.mtrl-sci

Radial etching of strongly confined crystal-phase defined quantum dots

We realize strongly confined quantum dots (QDs) in InAs nanowires (NWs) by combining epitaxial crystal-phase control with chemical wet etching. A strong axial confinement is first introduced by growing closely spaced wurtzite (WZ) tunnel barriers in NWs to enclose a zinc blende (ZB) QD. The NW cross-section is then reduced by isotropic etching to obtain very small QDs, with a maximum observed charging energy > 30 meV. Using low-temperature electrical characterization and finite-element method simulations, we study how charging energies and the onset of electron filling scale with QD diameter. For extremely small diameters, we identify a regime where stray capacitances become non-negligible, limiting further increase in charging energy by diameter reduction alone. This approach to increasing confinement is particularly relevant for understanding the strong spin-orbit interaction observed in crystal-phase QDs, possibly linked to polarization charges at the WZ/ZB interfaces. Small diameter QDs allow considerably weaker interfering electric fields when studied, but the QDs cannot be realized with epitaxial growth alone due to a loss of crystal phase control.

cond-mat.mes-hall

Information Thermodynamics in a Quantum Dot Szilard Engine - Experimentally Investigating Fluctuation Theorems and Thermodynamic Uncertainty Relations

In Szilard's engine, measurement and feedback allows to extract work from an equilibrium environment, a process otherwise forbidden by the laws of thermodynamics. Recent theoretical developments have established fluctuation theorems and thermodynamic uncertainty relations that constrain the fluctuations in Szilard's engine. These relations rely on auxiliary experimental protocols known as backward experiments. Here, we experimentally investigate the thermodynamics of Szilard's engine by implementing two distinct types of backward experiments. We verify and compare the corresponding fluctuation theorems and thermodynamic uncertainty relations associated with each protocol. Our results reveal that the entropy production inferable from measurement may serve as a more relevant quantifier of information than the widely used mutual information.

cond-mat.mes-hall

Unconventional cross sections in zinc phosphide nanowires grown using exclusively earth-abundant components

To enable lightweight and flexible solar cell applications it is imperative to develop direct bandgap absorber materials. Moreover, to enhance the potential sustainability impact of the technologies there is a drive to base the devices on earth-abundant and readily available elements. Herein, we report on the epitaxial growth of Zn3P2 nanowires using exclusively earth-abundant components, using Sn as the nanowire catalyst and Si (111) as the substrate. We observe that the nanowires exhibit a triangular cross section at lower temperatures, a pseudo-pentagonal cross section at intermediate temperatures, and a hexagonal cross section in a twin plane superlattice configuration at high temperatures and high V/II ratios. At low temperatures, the surface facets are constricted into a metastable configuration, yielding the triangular morphology due to the symmetry of the substrate, while intermediate temperatures facilitate the formation of a pseudo-pentagonal morphology with lower surface to volume ratio. The twin plane superlattice structure can only be observed at conditions that facilitate the incorporation of Sn into Zn3P2, which is needed to form heterotwins in the tetragonal structure, namely at high temperatures and high phosphine partial pressures. These findings show a clear pathway to use Zn3P2 nanowires in sustainable solar energy harvesting using exclusively earth-abundant components, as well as opening up a novel route of fabricating quantum wells inside nanowires using heterotwins.

cond-mat.mtrl-sci

Near-Unity Charge Readout in a Nonlinear Resonator without Matching

Dissipative sensors typically use linear resonators with impedance matching to achieve maximal signal and fast operation. The impedance matching, however, sets an upper limit to the bandwidth of the readout. In this paper, we present a nonlinear resonator performing the readout of a double quantum dot charge state via a charge-sensing quantum dot. We show that by driving the resonator in the nonlinear regime, we achieve a near-unity signal for a dissipative sensor. This despite not satisfying the sensor impedance matching requirements necessary for such large signals in the linear regime. Our experiments, supported by numerical calculations, demonstrate that the signal increase stems from the sensor dissipation shifting the onset of the nonlinear resonator response. By lifting the matching requirement, we open up an avenue to ultrafast charge detectors as the resonator input-output coupling - setting the detector bandwidth - does not have to match to the typically much slower sensor dissipation rate.

cond-mat.mes-hall

Interfaces in epitaxially grown Zn3P2 nanowires and their composition dependent optoelectronic properties for photovoltaic applications

Epitaxially grown nanowires have shown promise for photovoltaic applications due to their nanophotonic properties. Moreover, the mechanical properties of nanowires can reduce crystallographic defect formation at interfaces to help enable new material combinations for photovoltaics. One material that stands to benefit from the nanowire morphology is zinc phosphide (Zn3P2), which despite promising optoelectronic properties has experienced limited applicability due to challenges achieving heteroepitaxy, stemming from its large lattice parameter and coefficient of thermal expansion. Herein, we identify the requirements for successful epitaxy of Zn3P2 nanowires using metalorganic chemical vapour deposition and the impact on interface structure and defect formation. Furthermore, using high-throughput optical spectroscopy we were able to demonstrate shifts in the photoluminescence intensity and energy by tuning the V/II ratio during growth, highlighting the compositional tunability of the optoelectronic properties of Zn3P2 nanowires.

cond-mat.mtrl-sci

Coherence of an Electronic Two-Level System under Continuous Charge Sensing by a Quantum Dot Detector

We investigate experimentally the quantum coherence of an electronic two-level system in a double quantum dot under continuous charge detection. The charge-state of the two-level system is monitored by a capacitively coupled single quantum dot detector that imposes a back-action effect to the system. The measured back-action is well described by an additional decoherence rate, approximately linearly proportional to the detector electron tunneling rate. We provide a model for the decoherence rate arising due to level detuning fluctuations induced by detector charge fluctuations. The theory predicts a factor of two lower decoherence rate than observed in the experiment, suggesting the need for a more elaborate theory accounting for additional sources of decoherence.

cond-mat.mes-hall

High-efficiency microwave photodetection by cavity coupled double dots with single cavity-photon sensitivity

We present a superconducting cavity-coupled double quantum dot (DQD) photodiode that achieves a maximum photon-to-electron conversion efficiency of 25% in the microwave domain. With a higher-quality-factor cavity and improved device design to prevent photon leakages through unwanted pathways, our device measures microwave signals down to 100 aW power level and achieves sensitivity to probe microwave signals with one photon at a time in the cavity. We analyze the photodiode operation using Jaynes-Cummings input-output theory, identifying the key improvements of stronger cavity-DQD coupling needed to achieve near-unity photodetection efficiency. The results presented in this work represent a crucial advancement toward near unity microwave photodetection efficiency with single cavity-photon sensitivity for studies of photon statistics in the microwave range and applications related to quantum information processing.

cond-mat.mes-hall

A coherence sweet spot with enhanced dipolar coupling

Qubits require a compromise between operation speed and coherence. Here, we demonstrate a compromise-free singlet-triplet (ST) qubit, where the qubit couples maximally to the driving field while simultaneously coupling minimally to the dominant noise sources. The qubit is implemented in a crystal-phase defined double-quantum dot in an InAs nanowire. Using a superconducting resonator, we measure the spin-orbit interaction (SOI) gap, the spin-photon coupling strength and the qubit decoherence rate as a function of the in-plane magnetic-field orientation. We demonstrate a spin qubit sweet spot maximizing the dipolar coupling and simultaneously minimizing the decoherence. Our theoretical description postulates phonons as the most likely dominant noise source. The compromise-free sweet spot originates from the SOI suggesting that it is not restricted to this material platform, but might find applications in any material with SOI. These findings pave the way for enhanced engineering of these nanomaterials for next-generation qubit technologies.

cond-mat.mes-hall

SnS2 thin film with in-situ and controllable Sb doping via atomic layer deposition for optoelectronic applications

SnS2 stands out as a highly promising two-dimensional material with significant potential for applications in the field of electronics. Numerous attempts have been undertaken to modulate the physical properties of SnS2 by doping with various metal ions. Here, we deposited a series of Sb-doped SnS2 via atomic layer deposition (ALD) super-cycle process and compared its crystallinity, composition, and optical properties to those of pristine SnS2. We found that the increase in the concentration of Sb is accompanied by a gradual reduction in the Sn and S binding energies. The work function is increased upon Sb doping from 4.32 eV (SnS2) to 4.75 eV (Sb-doped SnS2 with 9:1 ratio). When integrated into photodetectors, the Sb-doped SnS2 showed improved performances, demonstrating increased peak photoresponsivity values from 19.5 A/W to 27.8 A/W at 405 nm, accompanied by an improvement in response speed. These results offer valuable insights into next-generation optoelectronic applications based on SnS2.

cond-mat.mtrl-sci

Continuous microwave photon counting by semiconductor-superconductor hybrids

The growing interest in quantum information has enabled the manipulation and readout of microwave photon states with high fidelities. The presently available microwave photon counters, based on superconducting circuits, are limited to non-continuous pulsed mode operation, requiring additional steps for qubit state preparation before an actual measurement. Here, we present a continuous microwave photon counter based on superconducting cavity-coupled semiconductor quantum dots. The device utilizes photon-assisted tunneling in a double quantum dot with tunneling events being probed by a third dot. Our device detects both single and multiple-photon absorption events independently, thanks to the energy tunability of a two-level double-dot absorber. We show that the photon-assisted tunnel rates serve as the measure of the cavity photon state in line with the P(E) theory - a theoretical framework delineating the mediation of the cavity photon field via a two-level environment. We further describe the single photon detection using the Jaynes-Cummings input-output theory and show that it agrees with the P(E) theory predictions.

cond-mat.mes-hall

Josephson junction \pi-0 transition induced by orbital hybridization in a double quantum dot

In this work, we manipulate the phase shift of a Josephson junction using a parallel double quantum dot (QD). By employing a superconducting quantum interference device, we determine how orbital hybridization and detuning affect the current-phase relation in the Coulomb blockade regime. For weak hybridization between the QDs, we find $\pi$ junction characteristics if at least one QD has an unpaired electron. Notably the critical current is higher when both QDs have an odd electron occupation. By increasing the inter-QD hybridization the critical current is reduced, until eventually a $\pi$-0 transition occurs. A similar transition appears when detuning the QD levels at finite hybridization. Based on a zero-bandwidth model, we argue that both cases of phase-shift transitions can be understood considering an increased weight of states with a double occupancy in the ground state and with the Cooper pair transport dominated by local Andreev reflection.

cond-mat.mes-hall

Dephasing in a crystal-phase defined double quantum dot charge qubit strongly coupled to a high-impedance resonator

Dephasing of a charge qubit is usually credited to charge noise in the environment. Here we show that charge noise may not be the limiting factor for the qubit coherence. To this end, we study coherence properties of a crystal-phase defined semiconductor nanowire double quantum dot (DQD) charge qubit strongly coupled to a high-impedance resonator using radio-frequency (RF) reflectometry. Response of this hybrid system is measured both at a charge noise sensitive operation point (with finite DQD detuning) and at an insensitive point (so-called sweet spot with zero detuning). A theoretical model based on Jaynes-Cummings Hamiltonian matches the experimental results well and yields only a 10 % difference in dephasing rates between the two cases, despite that the sensitivity to detuning charge noise differs by a factor of 5. Therefore the charge noise is not the limiting factor for the coherence in this type of semiconducting nanowire qubits.

cond-mat.mes-hall

Microwave power harvesting using resonator-coupled double quantum dot photodiode

We demonstrate a microwave power-to-electrical energy conversion in a resonator-coupled double quantum dot. The system, operated as a photodiode, converts individual microwave photons to electrons tunneling through the double dot, resulting in an electrical current flowing against the applied voltage bias at input powers down to 1 femto-watt. The device attains a maximum power harvesting efficiency of 2%, with the photon-to-electron conversion efficiency reaching 12% in the single photon absorption regime. We find that the power conversion depends on thermal effects showing that thermodynamics plays a crucial role in the single photon energy conversion.

cond-mat.mes-hall

Strong coupling between a microwave photon and a singlet-triplet qubit

Tremendous progress in few-qubit quantum processing has been achieved lately using superconducting resonators coupled to gate voltage defined quantum dots. While the strong coupling regime has been demonstrated recently for odd charge parity flopping mode spin qubits, first attempts towards coupling a resonator to even charge parity singlet-triplet spin qubits have resulted only in weak spin-photon coupling strengths. Here, we integrate a zincblende InAs nanowire double quantum dot with strong spin-orbit interaction in a magnetic-field resilient, high-quality resonator. In contrast to conventional strategies, the quantum confinement is achieved using deterministically grown wurtzite tunnel barriers without resorting to electrical gating. Our experiments on even charge parity states and at large magnetic fields, allow to identify the relevant spin states and to measure the spin decoherence rates and spin-photon coupling strengths. Most importantly, we find an anti-crossing between the resonator mode in the single photon limit and a singlet-triplet qubit with an electron spin-photon coupling strength of $g/2\pi=139\pm4$ MHz. Combined with the resonator decay rate $\kappa/2\pi=19.8\pm0.2$ MHz and the qubit dephasing rate $\gamma/2\pi=116\pm7$ MHz, our system achieves the strong coupling regime in which the coherent coupling exceeds qubit and resonator linewidth. These results pave the way towards large-scale quantum system based on singlet-triplet qubits.

cond-mat.mes-hall

Quantum Dot Source-Drain Transport Response at Microwave Frequencies

Quantum dots are frequently used as charge sensitive devices in low temperature experiments to probe electric charge in mesoscopic conductors where the current running through the quantum dot is modulated by the nearby charge environment. Recent experiments have been operating these detectors using reflectometry measurements up to GHz frequencies rather than probing the low frequency current through the dot. In this work, we use an on-chip coplanar waveguide resonator to measure the source-drain transport response of two quantum dots at a frequency of 6 GHz, further increasing the bandwidth limit for charge detection. Similar to the low frequency domain, the response is here predominantly dissipative. For large tunnel coupling, the response is still governed by the low frequency conductance, in line with Landauer-B\"uttiker theory. For smaller couplings, our devices showcase two regimes where the high frequency response deviates from the low frequency limit and Landauer-B\"uttiker theory: When the photon energy exceeds the quantum dot resonance linewidth, degeneracy dependent plateaus emerge. These are reproduced by sequential tunneling calculations. In the other case with large asymmetry in the tunnel couplings, the high frequency response is two orders of magnitude larger than the low frequency conductance G, favoring the high frequency readout.

cond-mat.mes-hall

Josephson current via spin and orbital states of a tunable double quantum dot

Supercurrent transport is experimentally studied in a Josephson junction hosting a double quantum dot (DQD) with tunable symmetries. The QDs are parallel-coupled to two superconducting contacts and can be tuned between strong inter-dot hybridization and a ring geometry where hybridization is suppressed. In both cases, we observe supercurrents when the two interacting orbitals are either empty or filled with spins, or a combination. However, when each QD hosts an unpaired spin, the supercurrent depends on the spin ground state. It is strongly suppressed for the ring geometry with a spin-triplet ground state at zero external magnetic field. By increasing the QD hybridization, we find that a supercurrent appears when the ground state changes to spin-singlet. In general, supercurrents are suppressed in cases of spin doublet ground state, but an exception occurs at orbital degeneracy when the system hosts one additional spin, as opposed to three, pointing to a broken particle-hole symmetry.

cond-mat.mes-hall