Searcharxiv⌕ Search

arXiv subjects

Senem Velipasalar

Publications and source records attributed to Senem Velipasalar.

At least 55 records · Page 3Linked to original sources

Learning-Based Delay-Aware Caching in Wireless D2D Caching Networks

Recently, wireless caching techniques have been studied to satisfy lower delay requirements and offload traffic from peak periods. By storing parts of the popular files at the mobile users, users can locate some of their requested files in their own caches or the caches at their neighbors. In the latter case, when a user receives files from its neighbors, device-to-device(D2D) communication is performed. D2D communication underlaid with cellular networks is also a new paradigm for the upcoming wireless systems. By allowing a pair of adjacent D2D users to communicate directly, D2D communication can achieve higher throughput, better energy efficiency and lower traffic delay. In this work, we propose an efficient learning-based caching algorithm operating together with a non-parametric estimator to minimize the average transmission delay in D2D-enabled cellular networks. It is assumed that the system does not have any prior information regarding the popularity of the files, and the non-parametric estimator is aimed at learning the intensity function of the file requests. An algorithm is devised to determine the best pairs that provide the best delay improvement in each loop to form a caching policy with very low transmission delay and high throughput. This algorithm is also extended to address a more general scenario, in which the distributions of fading coefficients and values of system parameters potentially change over time. Via numerical results, the superiority of the proposed algorithm is verified by comparing it with a naive algorithm, in which all users simply cache their favorite files, and by comparing with a probabilistic algorithm, in which the users cache a file with a probability that is proportional to its popularity.

cs.IT↗

Autonomously and Simultaneously Refining Deep Neural Network Parameters by a Bi-Generative Adversarial Network Aided Genetic Algorithm

The choice of parameters, and the design of the network architecture are important factors affecting the performance of deep neural networks. Genetic Algorithms (GA) have been used before to determine parameters of a network. Yet, GAs perform a finite search over a discrete set of pre-defined candidates, and cannot, in general, generate unseen configurations. In this paper, to move from exploration to exploitation, we propose a novel and systematic method that autonomously and simultaneously optimizes multiple parameters of any deep neural network by using a GA aided by a bi-generative adversarial network (Bi-GAN). The proposed Bi-GAN allows the autonomous exploitation and choice of the number of neurons, for fully-connected layers, and number of filters, for convolutional layers, from a large range of values. Our proposed Bi-GAN involves two generators, and two different models compete and improve each other progressively with a GAN-based strategy to optimize the networks during GA evolution. Our proposed approach can be used to autonomously refine the number of convolutional layers and dense layers, number and size of kernels, and the number of neurons for the dense layers; choose the type of the activation function; and decide whether to use dropout and batch normalization or not, to improve the accuracy of different deep neural network architectures. Without loss of generality, the proposed method has been tested with the ModelNet database, and compared with the 3D Shapenets and two GA-only methods. The results show that the presented approach can simultaneously and successfully optimize multiple neural network parameters, and achieve higher accuracy even with shallower networks.

cs.CV↗

Autonomously and Simultaneously Refining Deep Neural Network Parameters by Generative Adversarial Networks

The choice of parameters, and the design of the network architecture are important factors affecting the performance of deep neural networks. However, there has not been much work on developing an established and systematic way of building the structure and choosing the parameters of a neural network, and this task heavily depends on trial and error and empirical results. Considering that there are many design and parameter choices, such as the number of neurons in each layer, the type of activation function, the choice of using drop out or not, it is very hard to cover every configuration, and find the optimal structure. In this paper, we propose a novel and systematic method that autonomously and simultaneously optimizes multiple parameters of any given deep neural network by using a generative adversarial network (GAN). In our proposed approach, two different models compete and improve each other progressively with a GAN-based strategy. Our proposed approach can be used to autonomously refine the parameters, and improve the accuracy of different deep neural network architectures. Without loss of generality, the proposed method has been tested with three different neural network architectures, and three very different datasets and applications. The results show that the presented approach can simultaneously and successfully optimize multiple neural network parameters, and achieve increased accuracy in all three scenarios.

cs.NE↗

Power Control and Mode Selection for VBR Video Streaming in D2D Networks

In this paper, we investigate the problem of power control for streaming variable-bit-rate (VBR) videos in a device-to-device (D2D) wireless network. A VBR video traffic model that considers video frame sizes and playout buffers at the mobile users is adopted. A setup with one pair of D2D users (DUs) and one cellular user (CU) is considered and three modes, namely cellular mode, dedicated mode and reuse mode, are employed. Mode selection for the data delivery is determined and the transmit powers of the base station (BS) and device transmitter are optimized with the goal of maximizing the overall transmission rate while VBR video data can be delivered to the CU and DU without causing playout buffer underflows or overflows. A low-complexity algorithm is proposed. Through simulations with VBR video traces over fading channels, we demonstrate that video delivery with mode selection and power control achieves a better performance than just using a single mode throughout the transmission.

cs.NI↗

A Deep Reinforcement Learning-Based Framework for Content Caching

Content caching at the edge nodes is a promising technique to reduce the data traffic in next-generation wireless networks. Inspired by the success of Deep Reinforcement Learning (DRL) in solving complicated control problems, this work presents a DRL-based framework with Wolpertinger architecture for content caching at the base station. The proposed framework is aimed at maximizing the long-term cache hit rate, and it requires no knowledge of the content popularity distribution. To evaluate the proposed framework, we compare the performance with other caching algorithms, including Least Recently Used (LRU), Least Frequently Used (LFU), and First-In First-Out (FIFO) caching strategies. Meanwhile, since the Wolpertinger architecture can effectively limit the action space size, we also compare the performance with Deep Q-Network to identify the impact of dropping a portion of the actions. Our results show that the proposed framework can achieve improved short-term cache hit rate and improved and stable long-term cache hit rate in comparison with LRU, LFU, and FIFO schemes. Additionally, the performance is shown to be competitive in comparison to Deep Q-learning, while the proposed framework can provide significant savings in runtime.

cs.IT↗

Intercell Interference-Aware Scheduling for Delay Sensitive Applications in C-RAN

Cloud radio access network (C-RAN) architecture is a new mobile network architecture that enables cooperative baseband processing and information sharing among multiple cells and achieves high adaptability to nonuniform traffic by centralizing the baseband processing resources in a virtualized baseband unit (BBU) pool. In this work, we formulate the utility of each user using a convex delay cost function, and design a two-step scheduling algorithm with good delay performance for the C-RAN architecture. In the first step, all users in multiple cells are grouped into small user groups, according to their interference levels and estimated utilities. In the second step, channels are matched to the user groups to maximize the system utility. The performance of our algorithm is further studied via simulations, and the advantages of C-RAN architecture is verified.

cs.IT↗

Joint Mode Selection and Resource Allocation for D2D Communications via Vertex Coloring

Device-to-device (D2D) communication underlaid with cellular networks is a new paradigm, proposed to enhance the performance of cellular networks. By allowing a pair of D2D users to communicate directly and share the same spectral resources with the cellular users, D2D communication can achieve higher spectral efficiency, improve the energy efficiency, and lower the traffic delay. In this paper, we propose a novel joint mode selection and channel resource allocation algorithm via the vertex coloring approach. We decompose the problem into three subproblems and design algorithms for each of them. In the first step, we divide the users into groups using a vertex coloring algorithm. In the second step, we solve the power optimization problem using the interior-point method for each group and conduct mode selection between the cellular mode and D2D mode for D2D users, and we assign channel resources to these groups in the final step. Numerical results show that our algorithm achieves higher sum rate and serves more users with relatively small time consumption compared with other algorithms. Also, the influence of system parameters and the tradeoff between sum rate and the number of served users are studied through simulation results.

cs.IT↗

Quality-Driven Resource Allocation for Full-Duplex Delay-Constrained Wireless Video Transmissions

In this paper, wireless video transmission over full-duplex channels under total bandwidth and minimum required quality constraints is studied. In order to provide the desired performance levels to the end-users in real-time video transmissions, quality of service (QoS) requirements such as statistical delay constraints are also considered. Effective capacity (EC) is used as the throughput metric in the presence of such statistical delay constraints since deterministic delay bounds are difficult to guarantee due to the time-varying nature of wireless fading channels. A communication scenario with multiple pairs of users in which different users have different delay requirements is addressed. Following characterizations from the rate-distortion (R-D) theory, a logarithmic model of the quality-rate relation is used for predicting the quality of the reconstructed video in terms of the peak signal-to-noise ratio (PSNR) at the receiver side. Since the optimization problem is not concave or convex, the optimal bandwidth and power allocation policies that maximize the weighted sum video quality subject to total bandwidth, maximum transmission power level and minimum required quality constraints are derived by using monotonic optimization (MO) theory.

cs.IT↗

A Delay-Aware Caching Algorithm for Wireless D2D Caching Networks

Recently, wireless caching techniques have been studied to satisfy lower delay requirements and offload traffic from peak periods. By storing parts of the popular files at the mobile users, users can locate some of their requested files in their own caches or the caches at their neighbors. In the latter case, when a user receives files from its neighbors, device-to-device (D2D) communication is enabled. D2D communication underlaid with cellular networks is also a new paradigm for the upcoming 5G wireless systems. By allowing a pair of adjacent D2D users to communicate directly, D2D communication can achieve higher throughput, better energy efficiency and lower traffic delay. In this work, we propose a very efficient caching algorithm for D2D-enabled cellular networks to minimize the average transmission delay. Instead of searching over all possible solutions, our algorithm finds out the best pairs, which provide the best delay improvement in each loop to form a caching policy with very low transmission delay and high throughput. This algorithm is also extended to address a more general scenario, in which the distributions of fading coefficients and values of system parameters potentially change over time. Via numerical results, the superiority of the proposed algorithm is verified by comparing it with a naive algorithm, in which all users simply cache their favorite files.

cs.IT↗

Accelerometer based Activity Classification with Variational Inference on Sticky HDP-SLDS

As part of daily monitoring of human activities, wearable sensors and devices are becoming increasingly popular sources of data. With the advent of smartphones equipped with acceloremeter, gyroscope and camera; it is now possible to develop activity classification platforms everyone can use conveniently. In this paper, we propose a fast inference method for an unsupervised non-parametric time series model namely variational inference for sticky HDP-SLDS(Hierarchical Dirichlet Process Switching Linear Dynamical System). We show that the proposed algorithm can differentiate various indoor activities such as sitting, walking, turning, going up/down the stairs and taking the elevator using only the acceloremeter of an Android smartphone Samsung Galaxy S4. We used the front camera of the smartphone to annotate activity types precisely. We compared the proposed method with Hidden Markov Models with Gaussian emission probabilities on a dataset of 10 subjects. We showed that the efficacy of the stickiness property. We further compared the variational inference to the Gibbs sampler on the same model and show that variational inference is faster in one order of magnitude.

cs.LG↗

Energy Efficiency of Hybrid-ARQ under Statistical Queuing Constraints

In this paper, energy efficiency of hybrid automatic repeat request (HARQ) schemes with statistical queuing constraints is studied for both constant-rate and random Markov arrivals by characterizing the minimum energy per bit and wideband slope. The energy efficiency is investigated when either an outage constraint is imposed and (the transmission rate is selected accordingly) or the transmission rate is optimized to maximize the throughput. In both cases, it is also assumed that there is a limitation on the number of retransmissions due to deadline constraints. Under these assumptions, closed-form expressions are obtained for the minimum energy per bit and wideband slope for HARQ with chase combining (CC). Through numerical results, the performances of HARQ-CC and HARQ with incremental redundancy (IR) are compared. Moreover, the impact of source variations/burstiness, deadline constraints, outage probability, queuing constraints on the energy efficiency is analyzed.

cs.IT↗

On the Throughput of Multi-Source Multi-Destination Relay Networks with Queueing Constraints

In this paper, the throughput of relay networks with multiple source-destination pairs under queueing constraints has been investigated for both variable-rate and fixed-rate schemes. When channel side information (CSI) is available at the transmitter side, transmitters can adapt their transmission rates according to the channel conditions, and achieve the instantaneous channel capacities. In this case, the departure rates at each node have been characterized for different system parameters, which control the power allocation, time allocation and decoding order. In the other case of no CSI at the transmitters, a simple automatic repeat request (ARQ) protocol with fixed rate transmission is used to provide reliable communication. Under this ARQ assumption, the instantaneous departure rates at each node can be modeled as an ON-OFF process, and the probabilities of ON and OFF states are identified. With the characterization of the arrival and departure rates at each buffer, stability conditions are identified and effective capacity analysis is conducted for both cases to determine the system throughput under statistical queueing constraints. In addition, for the variable-rate scheme, the concavity of the sum rate is shown for certain parameters, helping to improve the efficiency of parameter optimization. Finally, via numerical results, the influence of system parameters and the behavior of the system throughput are identified.

cs.IT↗

Multimedia Transmission over Cognitive Radio Channels under Sensing Uncertainty

This paper studies the performance of hierarchical modulation-based multimedia transmission in cognitive radio (CR) systems with imperfect channel sensing results under constraints on both transmit and interference power levels. Unequal error protection (UEP) of data transmission using hierarchical quadrature amplitude modulation (HQAM) is considered in which high priority (HP) data is protected more than low priority (LP) data. In this setting, closed-form bit error rate (BER) expressions for HP data and LP data are derived in Nakagami-$m$ fading channels in the presence of sensing errors. Subsequently, the optimal power control that minimizes weighted sum of average BERs of HP bits and LP bits or its upper bound subject to peak/average transmit power and average interference power constraints is derived and a low-complexity power control algorithm is proposed. Power levels are determined in three different scenarios, depending on the availability of perfect channel side information (CSI) of the transmission and interference links, statistical CSI of both links, or perfect CSI of the transmission link and imperfect CSI of the interference link. The impact of imperfect channel sensing decisions on the error rate performance of cognitive transmissions is also evaluated. In addition, tradeoffs between the number of retransmissions, the severity of fading, and peak signal-to-noise ratio (PSNR) quality are analyzed numerically. Moreover, performance comparisons of multimedia transmission with conventional quadrature amplitude modulation (QAM) and HQAM, and the proposed power control strategies are carried out in terms of the received data quality and number of retransmissions.

cs.IT↗

On the Throughput of Hybrid-ARQ under QoS Constraints

Hybrid Automatic Repeat Request (HARQ) is a high performance communication protocol, leading to effective use of the wireless channel and the resources with only limited feedback about the channel state information (CSI) to the transmitter. In this paper, the throughput of HARQ with incremental redundancy (IR) and fixed transmission rate is studied in the presence of quality of service (QoS) constraints imposed as limitations on buffer overflow probabilities. In particular, tools from the theory of renewal processes and stochastic network calculus are employed to characterize the maximum arrival rates that can be supported by the wireless channel when HARQ-IR is adopted. Effective capacity is employed as the throughput metric and a closed-form expression for the effective capacity of HARQ-IR is determined for small values of the QoS exponent. The impact of the fixed transmission rate, QoS constraints, and hard deadline limitations on the throughput is investigated and comparisons with regular ARQ operation are provided.

cs.IT↗

Effective Capacity of Two-Hop Wireless Communication Systems

A two-hop wireless communication link in which a source sends data to a destination with the aid of an intermediate relay node is studied. It is assumed that there is no direct link between the source and the destination, and the relay forwards the information to the destination by employing the decode-and-forward scheme. Both the source and intermediate relay nodes are assumed to operate under statistical quality of service (QoS) constraints imposed as limitations on the buffer overflow probabilities. The maximum constant arrival rates that can be supported by this two-hop link in the presence of QoS constraints are characterized by determining the effective capacity of such links as a function of the QoS parameters and signal-to-noise ratios at the source and relay, and the fading distributions of the links. The analysis is performed for both full-duplex and half-duplex relaying. Through this study, the impact upon the throughput of having buffer constraints at the source and intermediate relay nodes is identified. The interactions between the buffer constraints in different nodes and how they affect the performance are studied. The optimal time-sharing parameter in half-duplex relaying is determined, and performance with half-duplex relaying is investigated.

cs.IT↗

Secure Wireless Communication and Optimal Power Control under Statistical Queueing Constraints

In this paper, secure transmission of information over fading broadcast channels is studied in the presence of statistical queueing constraints. Effective capacity is employed as a performance metric to identify the secure throughput of the system, i.e., effective secure throughput. It is assumed that perfect channel side information (CSI) is available at both the transmitter and the receivers. Initially, the scenario in which the transmitter sends common messages to two receivers and confidential messages to one receiver is considered. For this case, effective secure throughput region, which is the region of constant arrival rates of common and confidential messages that can be supported by the buffer-constrained transmitter and fading broadcast channel, is defined. It is proven that this effective throughput region is convex. Then, the optimal power control policies that achieve the boundary points of the effective secure throughput region are investigated and an algorithm for the numerical computation of the optimal power adaptation schemes is provided. Subsequently, the special case in which the transmitter sends only confidential messages to one receiver, is addressed in more detail. For this case, effective secure throughput is formulated and two different power adaptation policies are studied. In particular, it is noted that opportunistic transmission is no longer optimal under buffer constraints and the transmitter should not wait to send the data at a high rate until the main channel is much better than the eavesdropper channel.

cs.IT↗

Channel Coding over Multiple Coherence Blocks with Queueing Constraints

This paper investigates the performance of wireless systems that employ finite-blocklength channel codes for transmission and operate under queueing constraints in the form of limitations on buffer overflow probabilities. A block fading model, in which fading stays constant in each coherence block and change independently between blocks, is considered. It is assumed that channel coding is performed over multiple coherence blocks. An approximate lower bound on the transmission rate is obtained from Feintein's Lemma. This lower bound is considered as the service rate and is incorporated into the effective capacity formulation, which characterizes the maximum constant arrival rate that can be supported under statistical queuing constraints. Performances of variable-rate and fixed-rate transmissions are studied. The optimum error probability for variable rate transmission and the optimum coding rate for fixed rate transmission are shown to be unique. Moreover, the tradeoff between the throughput and the number of blocks over which channel coding is performed is identified.

cs.IT↗

On the Effective Capacity of Two-Hop Communication Systems

In this paper, two-hop communication between a source and a destination with the aid of an intermediate relay node is considered. Both the source and intermediate relay node are assumed to operate under statistical quality of service (QoS) constraints imposed as limitations on the buffer overflow probabilities. It is further assumed that the nodes send the information at fixed power levels and have perfect channel side information. In this scenario, the maximum constant arrival rates that can be supported by this two-hop link are characterized by finding the effective capacity. Through this analysis, the impact upon the throughput of having buffer constraints at the source and intermediate-hop nodes is identified.

cs.IT↗