arXiv subjects

Sergei V. Kalinin

Publications and source records attributed to Sergei V. Kalinin.

At least 271 records · Page 15Linked to original sources

arXiv2013

Universal emergence of spatially-modulated structures induced by flexo-antiferrodistortive coupling in multiferroics

We proved the existence of a universal flexo-antiferrodistortive coupling as a necessary complement to the well-known flexoelectric coupling. The coupling is universal for all antiferrodistortive systems and can lead to the formation of incommensurate, spatially-modulated phases in multiferroics. Our analysis can provide a self-consistent mesoscopic explanation for a broad range of modulated domain structures observed experimentally in multiferroics.

cond-mat.mtrl-sci↗

arXiv2013

Effective piezoelectric response of twin walls in ferroelectrics

The effective piezoelectric coefficients of twin walls in tetragonal ferroelectric are calculated in the framework of decoupling approximation and Landau-Ginzburg-Devonshire theory allowing for polarization gradient terms, electrostriction and flexoelectric coupling. Using an example of piezoelectric response of a1-a2 twins to a homogeneous electric field, we show that the response is almost independent on the flexoelectric coupling, but is very sensitive to the values of polarization gradient coefficients. This behavior originates from the strong coupling between local dielectric susceptibility and the gradient coefficients. The enhancement of piezoelectric response from 10% up to a factor of 103 times is predicted. The local electromechanical response of the domain walls can thus provide information on the gradient terms in GLD expansion and pinning mechanisms of the ferroelectric domain walls. The observability of these effects by the piezoresponse force microscopy of electroded structures and impact on the functional properties of the systems with dense domain structures is analyzed

cond-mat.mtrl-sci↗

arXiv2012

Temperature-composition Phase Diagrams for Ba1-xSrxFe2As2 and Ba0.5Sr0.5(Fe1-yCoy)2As2

Single crystals of mixed alkaline earth metal iron arsenide materials of Ba1-xSrxFe2As2 and Ba0.5Sr0.5(Fe1-yCoy)2As2 are synthesized via the self-flux method. Ba1-xSrxFe2As2 display spin-density wave features (TN) at temperatures intermediate to the parent materials, x = 0 and 1, with TN(x) following an approximately linear trend. Cobalt doping of the 1 to 1 Ba:Sr mixture, Ba0.5Sr0.5(Fe1-yCoy)2As2, results in a superconducting dome with maximum transition temperature of TC = 19 K at y = 0.092, close to the maximum transition temperatures observed in unmixed A(Fe1-yCoy)2As2; however, an annealed crystal with y = 0.141 showed a TC increase from 11 to 16 K with a decrease in Sommerfeld coefficient from 2.58(2) to 0.63(2) mJ/(K2 mol atom). For the underdoped y = 0.053, neutron diffraction results give evidence that TN and structural transition (To) are linked at 78 K, with anomalies observed in magnetization, resistivity and heat capacity data, while a superconducting transition at TC ~ 6 K is seen in resistivity and heat capacity data. Scanning tunneling microscopy measurements for y = 0.073 give Dynes broadening factor of 1.15 and a superconducting gap of 2.37 meV with evidence of surface inhomogeneity.

cond-mat.supr-con↗

arXiv2012

Correlation Between Structure And C-Afm Contrast Of 180-Degree Domain Walls In Rhombohedral Bati03

Using Landau-Ginzburg-Devonshire theory we describe 180-degree domain wall structure, intrinsic energy and carrier accumulation in rhombohedral phase of BaTiO3 as a function of the wall orientation and flexoelectric coupling strength. Two types of domain wall structures (phases of the wall) exist depending on the wall orientation. The low-energy 'achiral' phase occurs in the vicinity of the {110} wall orientation and has odd polarization profile invariant with respect to inversion about the wall center. The second 'chiral' phase occurs around {211} wall orientations and corresponds to mixed parity domain walls that may be of left-handed or right-handed chirality. The transformation between the phases is abrupt, accompanied with 20-30% change of the domain wall thickness and can happen at fixed wall orientation with temperature change. We suggest that the phase transition may be detected through domain wall thickness change or by c-AFM. The structure of the domain wall is correlated to its conductivity through polarization component normal to the domain wall, which causes free carriers accumulation. Depending on the temperature and flexoelectric coupling strength relative conductivity of the wall becomes at least one order of magnitude higher than in the single-domain region, creating c-AFM contrast enhancement pronounced and detectable.

cond-mat.mtrl-sci↗

arXiv2012

Anisotropic conductivity of uncharged domain walls in BiFeO3

Experimental observations suggest that nominally uncharged, as-grown domain walls in ferroelectric thin films can be conductive, yet comprehensive theoretical models to explain this behavior are lacking. Here, Landau theory is used to evolve an analytical treatment of the anisotropic carrier accumulation by nominally uncharged domain walls in multiferroic BiFeO3. Strong angular dependence of the carrier accumulation by 180-degree domain walls originates from local band bending via angle-dependent electrostriction and flexoelectric coupling mechanisms. Theoretical results are in qualitative agreement with experimental data, and provide a Landau-Ginzburg-Devonshire counterpart that is consistent with recent first principles calculations. These studies suggest that a significantly more diverse range of domain wall structures could possess novel electronic properties than previously believed. Similarly, emergent electronic behaviors at ferroic walls are typically underpinned by multiple mechanisms, necessitating first-principle studies of corresponding coupling parameters.

cond-mat.mtrl-sci↗

arXiv2012

Conductivity of twin walls - surface junctions in ferroelastics: interplay of deformation potential, octahedral rotations, improper ferroelectricity and flexoelectric coupling

Electronic and structural phenomena at the twin domain wall-surface junctions in the ferroelastic materials are analyzed. Carriers accumulation caused by the strain-induced band structure changes originated via the deformation potential mechanism, structural order parameter gradient, rotostriction and flexoelectric coupling is explored. Approximate analytical results show that inhomogeneous elastic strains, which exist in the vicinity of the twin walls - surface junctions due to the rotostriction coupling, decrease the local band gap via the deformation potential and flexoelectric coupling mechanisms. This is the direct mechanism of the twin walls static conductivity in ferroelastics and, by extension, in multiferroics and ferroelectrics. On the other hand, flexoelectric and rotostriction coupling leads to the appearance of the improper polarization and electric fields proportional to the structural order parameter gradient in the vicinity of the twin walls - surface junctions. The "flexo-roto" fields leading to the carrier accumulation are considered as indirect mechanism of the twin walls conductivity. Comparison of the direct and indirect mechanisms illustrates complex range of phenomena directly responsible for domain walls static conductivity in materials with multiple order parameters.

cond-mat.mtrl-sci↗

arXiv2012

Ionically-mediated electromechanical hysteresis in transition metal oxides

Electromechanical activity, remanent polarization states, and hysteresis loops in paraelectric TiO2 and SrTiO3 are observed. The coupling between the ionic dynamics and incipient ferroelectricity in these materials is analyzed using extended Ginsburg Landau Devonshire (GLD) theory. The possible origins of electromechanical coupling including ionic dynamics, surface-charge induced electrostriction, and ionically-induced ferroelectricity are identified. For the latter, the ionic contribution can change the sign of first order GLD expansion coefficient, rendering material effectively ferroelectric. These studies provide possible explanation for ferroelectric-like behavior in centrosymmetric transition metal oxides.

cond-mat.mtrl-sci↗

arXiv2012

Mesoscopic mechanism of the domain wall interaction with elastic defects in ferroelectrics

The role of elastic defects on the kinetics of 180-degree uncharged ferroelectric domain wall motion is explored using continuum time-dependent LGD equation with elastic dipole coupling. In one dimensional case, ripples, steps and oscillations of the domain wall velocity appear due to the wall-defect interactions. While the defects do not affect the limiting-wall velocity vs. field dependence, they result in the minimal threshold field required to activate the wall motions. The analytical expressions for the threshold field are derived and the latter is shown to be much smaller than the thermodynamic coercive field. The threshold field is linearly proportional to the concentration of defects and non-monotonically depends on the average distance between them. The obtained results provide the insight into the mesoscopic mechanism of the domain wall pinning by elastic defects in ferroelectrics.

cond-mat.mtrl-sci↗

arXiv2011

Domain wall conduction in multiaxial ferroelectrics

The conductance of domain wall structures consisting of either stripes or cylindrical domains in multi-axial ferroelectric-semiconductors is analyzed. The effects of the domain size, wall tilt and curvature, on charge accumulation, are analyzed using the Landau-Ginsburg Devonshire (LGD) theory for polarization combined with Poisson equation for charge distributions. Both the classical ferroelectric parameters including expansion coefficients in 2-4-6 Landau potential and gradient terms, as well as flexoelectric coupling, inhomogeneous elastic strains and electrostriction are included in the present analysis. Spatial distributions of the ionized donors, free electrons and holes were found self-consistently using the effective mass approximation for the respective densities of states. The proximity and size effect of the electron and donor accumulation/depletion by thin stripe domains and cylindrical nanodomains are revealed. In contrast to thick domain stripes and thicker cylindrical domains, in which the carrier accumulation (and so the static conductivity) sharply increases at the domain walls only, small nanodomains of radius less then 5-10 correlation length appeared conducting across entire cross-section. Implications of such conductive nanosized channels may be promising for nanoelectronics.

cond-mat.mtrl-sci↗

arXiv2011

Watching Domains Grow: In-situ studies of polarization switching by combined Scanning Probe and Scanning Transmission Electron Microscopy

Ferroelectric domain nucleation and growth in multiferroic BiFeO3 films is observed directly by applying a local electric field with a conductive tip inside a scanning transmission electron microscope. The nucleation and growth of a ferroelastic domain and its interaction with pre-existing 71^{\circ} domain walls are observed and compared with the results of phase-field modeling. In particular, a preferential nucleation site and direction-dependent pinning of domain walls is observed due to slow kinetics of metastable switching in the sample without a bottom electrode. These in-situ spatially-resolved observations of a first-order bias-induced phase transition reveal the mesoscopic mechanisms underpinning functionality of a wide range of multiferroic materials.

cond-mat.mtrl-sci↗

arXiv2010

Oxygen-Induced Surface Reconstruction of SrRuO3 and Its Effect on the BaTiO3 Interface

Atomically engineered oxide multilayers and superlattices display unique properties responsive to the electronic and atomic structures of the interfaces. We have followed the growth of ferroelectric BaTiO3 on SrRuO3 electrode with in situ atomic scale analysis of the surface structure at each stage. An oxygen-induced surface reconstruction of SrRuO3 leads to formation of SrO rows spaced at twice the bulk periodicity. This reconstruction modifies the structure of the first BaTiO3 layers grown subsequently, including intermixing observed with cross-section spectroscopy. These observations reveal that this common oxide interface is much more interesting than previously reported, and provide a paradigm for oxygen engineering of oxide structure at an interface.

cond-mat.mtrl-sci↗

arXiv2010

Control of the structural and magnetic properties of perovskite oxide ultrathin films through the substrate symmetry effect

Perovskite transition-metal oxides are networks of corner-sharing octahedra whose tilts and distortions are known to affect their electronic and magnetic properties. We report calculations on a model interfacial structure to avoid chemical influences and show that the symmetry mismatch imposes an interfacial layer with distortion modes that do not exist in either bulk material, creating new interface properties driven by symmetry alone. Depending on the resistance of the octahedra to deformation, the interface layer can be as small as one unit cell or extend deep into the thin film.

cond-mat.mtrl-sci↗

arXiv2008

Thermodynamics of nanodomain formation and breakdown in Scanning Probe Microscopy: Landau-Ginzburg-Devonshire approach

Thermodynamics of tip-induced nanodomain formation in scanning probe microscopy of ferroelectric films and crystals is studied using the Landau-Ginzburg-Devonshire phenomenological approach. The local redistribution of polarization induced by the biased probe apex is analyzed including the effects of polarization gradients, field dependence of dielectric properties, intrinsic domain wall width, and film thickness. The polarization distribution inside subcritical nucleus of the domain preceding the nucleation event is very smooth and localized below the probe, and the electrostatic field distribution is dominated by the tip. In contrast, polarization distribution inside the stable domain is rectangular-like, and the associated electrostatic fields clearly illustrate the presence of tip-induced and depolarization field components. The calculated coercive biases of domain formation are in a good agreement with available experimental results for typical ferroelectric materials. The microscopic origin of the observed domain tip elongation in the region where the probe electric field is much smaller than the intrinsic coercive field is the positive depolarization field in front of the moving counter domain wall. For infinitely thin domain walls local domain breakdown through the sample depth appears. The results obtained here are complementary to the Landauer-Molotskii energetic approach.

cond-mat.mtrl-sci↗

arXiv2008

The Interaction of an 180 degree Ferroelectric Domain Wall with a Biased Scanning Probe Microscopy Tip: Effective Wall Geometry and Thermodynamics in Ginzburg-Landau-Devonshire Theory

The interaction of ferroelectric 180 degree domain wall with a strongly inhomogeneous electric field of biased Scanning Probe Microscope tip is analyzed within continuous Landau-Ginzburg-Devonshire theory. Equilibrium shape of the initially flat domain wall boundary bends, attracts or repulses from the probe apex, depending on the sign and value of the applied bias. For large tip-wall separations, the probe-induced domain nucleation is possible. The approximate analytical expressions for the polarization distribution are derived using direct variational method. The expressions provide insight how the equilibrium polarization distribution depends on the wall finite-width, correlation and depolarization effects, electrostatic potential distribution of the probe and ferroelectric material parameters.

cond-mat.mtrl-sci↗

arXiv2008

Surface Effect on Domain Wall Width in Ferroelectrics

We study the effect of depolarization field related with inhomogeneous polarization distribution, strain and surface energy parameters on a domain wall profile near the surface of a ferroelectric film within the framework of Landau-Ginzburg-Devonshire phenomenology. Both inhomogeneous elastic stress and positive surface energy lead to the wall broadening at electrically screened surface. For ferroelectrics with weak piezoelectric coupling, the extrapolation length that defines surface energy parameter, affects the wall broadening more strongly than inhomogeneous elastic stress. Unexpectedly, the domain wall profile follows a long-range power law when approaching the surface, while it saturates exponentially in the bulk. In materials with high piezoelectric coupling and negligibly small surface energy (i.e. high extrapolation length) inhomogeneous elastic stress effect dominates.

cond-mat.mtrl-sci↗

arXiv2008

Quantitative piezoelectric force microscopy: Influence of tip shape, size, and contact geometry on the nanoscale resolution of an antiparallel ferroelectric domain wall

The structure of a single antiparallel ferroelectric domain wall in LiNbO3 is quantitatively mapped by piezoelectric force microscopy (PFM) with calibrated probe geometry. The PFM measurements are performed for 49 probes with the radius varying from 10 to 300 nm. The magnitude and variation of the experimental piezoelectric coefficient across a domain wall matches the profiles calculated from a comprehensive analytical theory, as well as 3-dimensional finite element method simulations. Quantitative agreement between experimental and theoretical profile widths is obtained only when a finite disk-type tip radius that is in true contact with the sample surface is considered, which is in agreement with scanning electron microscopy images of the actual tips after imaging. The magnitude of the piezoelectric coefficient is shown to be independent of the tip radius, and the PFM profile width is linearly proportional to the tip radius. Finally we demonstrate a method to extract any intrinsic material broadening of the ferroelectric wall width. Surprisingly wide wall widths of 20- 200nm are observed.

cond-mat.mtrl-sci↗

arXiv2008

Effect of the Intrinsic Width on the Piezoelectric Force Microscopy of a Single Ferroelectric Domain Wall

Intrinsic domain wall width is a fundamental parameter that reflects bulk ferroelectric properties and governs the performance of ferroelectric memory devices. We present closed-form analytical expressions for vertical and lateral piezoelectric force microscopy (PFM) profiles for the conical and disc models of the tip, beyond point charge and sphere approximations. The analysis takes into account the finite intrinsic width of the domain wall, and dielectric anisotropy of the material. These analytical expressions provide insight into the mechanisms of PFM image formation and can be used for quantitative analysis of the PFM domain wall profiles. PFM profile of a realistic domain wall is shown to be the convolution of its intrinsic profile and resolution function of PFM.

cond-mat.mtrl-sci↗

arXiv2008

Imaging Mechanism of Piezoresponse Force Microscopy in Capacitor Structures

The image formation mechanism in Piezoresponse Force Microscopy (PFM) of capacitor structures is analyzed. We demonstrate that the spatial resolution is a bilinear function of film and top electrode thicknesses, and derive the corresponding analytical expressions. For many perovskites, the opposite contributions of d31 and d33 components can result in anomalous domain wall profiles. This analysis establishes the applicability limits of PFM for polarization dynamics studies in capacitors, and applies to other structural probes, including focused X-ray studies of capacitor structures.

cond-mat.mtrl-sci↗