arXiv subjects

Sergei V. Kalinin

Publications and source records attributed to Sergei V. Kalinin.

At least 289 records · Page 16Linked to original sources

arXiv2007

Local Polarization Switching in the Presence of Surface Charged Defects: Microscopic Mechanisms and Piezoresponse Force Spectroscopy Observations

The thermodynamics and kinetics of tip-induced polarization switching in Piezoresponse Force Microscopy in the presence of surface charge defects is studied using the combination of analytical and numerical techniques. The signature of the defects in hysteresis loop fine structure and Switching Spectroscopy PFM images is identified and compared to experimental observations. An approach for the deconvolution of PFM spectroscopy measurements to extract relevant defect parameters is derived. This methodology is universal and can be extended to switching in other ferroics and in reversible electrochemical processes, establishing a pathway for the understanding of the thermodynamics and kinetics of phase transitions at a single defect level.

cond-mat.mtrl-sci↗

arXiv2007

The Band Excitation Method in Scanning Probe Microscopy for Rapid Mapping of Energy Dissipation on the Nanoscale

Mapping energy transformation pathways and dissipation on the nanoscale and understanding the role of local structure on dissipative behavior is a challenge for imaging in areas ranging from electronics and information technologies to efficient energy production. Here we develop a novel Scanning Probe Microscopy (SPM) technique in which the cantilever is excited and the response is recorded over a band of frequencies simultaneously rather than at a single frequency as in conventional SPMs. This band excitation (BE) SPM allows very rapid acquisition of the full frequency response at each point (i.e. transfer function) in an image and in particular enables the direct measurement of energy dissipation through the determination of the Q-factor of the cantilever-sample system. The BE method is demonstrated for force-distance and voltage spectroscopies and for magnetic dissipation imaging with sensitivity close to the thermomechanical limit. The applicability of BE for various SPMs is analyzed, and the method is expected to be universally applicable to all ambient and liquid SPMs.

cond-mat.mtrl-sci↗

arXiv2007

Quantum Flexoelectricity in Low Dimensional Systems

Symmetry breaking at surfaces and interfaces and the capability to support large strain gradients in nanoscale systems enable new forms of electromechanical coupling. Here we introduce the concept of quantum flexoelectricity, a phenomenon that is manifested when the mechanical deformation of non-polar quantum systems results in the emergence of net dipole moments and hence linear electromechanical coupling proportional to local curvature. The concept is illustrated in carbon systems, including polyacetylene and nano graphitic ribbons. Using density functional theory calculations for systems made of up to 400 atoms, we determine the flexoelectric coefficients to be of the order of ~ 0.1 e, in agreement with the prediction of linear theory. The implications of quantum flexoelectricity on electromechanical device applications, and physics of carbon based materials are discussed.

cond-mat.mtrl-sci↗

arXiv2007

The Piezoresponse Force Microscopy of surface layers and thin films: effective response and resolution function

Signal formation mechanism of Piezoresponse Force Microscopy of piezoelectric surface layers and thin films on stiff and elastically matched substrates is analyzed and thickness dependence of effective piezoelectric response, object transfer function components and Rayleigh two-point resolution are derived. Obtained exact series and simple Pade approximations can be applied for the effective piezoresponse analytical calculations in the case of films capped on different substrates. The effective piezoresponse is thickness dependent for piezoelectric films on substrates with low dielectric permittivity (extrinsic size effect), whereas the thickness dependence is essentially suppressed for giant permittivity or metallic substrates. Thus implications of analysis for ferroelectric data storage and device applications are discussed.

cond-mat.mtrl-sci↗

arXiv2007

Towards local electromechanical probing of cellular and biomolecular systems in a liquid environment

Electromechanical coupling is ubiquitous in biological systems with examples ranging from simple piezoelectricity in calcified and connective tissues to voltage-gated ion channels, energy storage in mitochondria, and electromechanical activity in cardiac myocytes and outer hair cell stereocilia. Piezoresponse force microscopy (PFM) has originally emerged as a technique to study electromechanical phenomena in ferroelectric materials, and in recent years, has been employed to study a broad range of non-ferroelectric polar materials, including piezoelectric biomaterials. At the same time, the technique has been extended from ambient to liquid imaging on model ferroelectric systems. Here, we present results on local electromechanical probing of several model cellular and biomolecular systems, including insulin and lysozyme amyloid fibrils, breast adenocarcinoma cells, and bacteriorhodopsin in a liquid environment. The specific features of SPM operation in liquid are delineated and bottlenecks on the route towards nanometer-resolution electromechanical imaging of biological systems are identified.

cond-mat.other↗

arXiv2007

Extrinsic Size Effect in Piezoresponse Force Microscopy of Thin Films

The extrinsic size effect in Piezoresponse Force Microscopy of ferroelectric and piezoelectric thin films on non-polar dielectric substrate is analyzed. Analytical expressions for effective piezoresponse, object transfer function components, and Rayleigh two-point resolution are obtained. These results can be broadly applied for effective piezoelectric response calculations in thin piezoelectric and ferroelectric films as well as surface polar layers e.g. in organic materials and bio-polymers. In particular, the effective piezoresponse strongly decreases with film thickness whereas the sharpness of domain stripes image increases due to the object transfer function spectrum broadening.

cond-mat.mtrl-sci↗

arXiv2007

Polarization Screening Effect on Local Polarization Switching Mechanism and Hysteresis Loop Measurements in Piezoresponse Force Microscopy

Piezoresponse Force Spectroscopy (PFS) has emerged as a powerful tool for probing polarization dynamics on the nanoscale. Application of a dc bias to a nanoscale probe in contact with a ferroelectric surface results in the nucleation and growth of a ferroelectric domain below the probe apex. The latter affects local electromechanical response detected by the probe. Resulting hysteresis loop contains information on local ferroelectric switching. The self-consistent analysis of the PFS data requires (a) deriving the thermodynamic parameters of domain nucleation and (b) establishing the relationships between domain parameters and PFM signal. Here, we analyze the effect of screening at the domain wall on local polarization reversal mechanism. It is shown that the screening control both the domain nucleation activation energy and hysteresis loop saturation rate.

cond-mat.mtrl-sci↗

arXiv2006

Nanoscale polarization manipulation and imaging in ferroelectric Langmuir-Blodgett polymer films

The behavior of ferroelectricity at the nanoscale is the focus of increasing research activity because of intense interest in the fundamental nature of spontaneous order in condensed-matter systems and because of the many practical applications of ferroelectric thin films to, for example, electromechanical transducers, infrared imaging sensors, and nonvolatile random-access memories. Ferroelectricity, in analogy with its namesake ferromagnetism, is the property of some crystalline systems to maintain a permanent, but reversible, electrical polarization in the absence of an external electric field. The imaging and dynamics of the piezoelectric response at the nanoscale is perhaps the most direct means of probing polarization, as has been demonstrated in a number of thin films and nanostructures . Here we report the use of piezoresponse force microscopy (PFM) and switching spectroscopy PFM (SSPFM) to image the ferroelectric properties, domain structure, and polarization switching of ultrathin ferroelectric Langmuir-Blodgett films of poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) copolymers. PFM imaging of P(VDF-TrFE) thin films reveals ferroelectric domain sizes on the order of 25-50 nm and an imaging resolution below 5 nm. The feature sizes in topography and PFM images are comparable and the boundaries of uniformly polarized regions coincide with topographic features. Arbitrary polarization patterns could be repeatedly written and erased, with writing resolution limited by the grain size. Hysteresis loops from individual domains show clear coercive voltage, but are not well saturated at +/-10 V amplitude.

cond-mat.mtrl-sci↗

arXiv2006

Piezoresponse Force Spectroscopy of Ferroelectric Materials

Piezoresponse Force Spectroscopy (PFS) has emerged as a powerful technique for probing highly localized switching behavior and the role of microstructure and defects on switching. The application of a dc bias to a scanning probe microscope tip in contact with a ferroelectric surface results in the nucleation and growth of a ferroelectric domain below the tip, resulting in changes in local electromechanical response. Resulting hysteresis loops contains information on local ferroelectric switching behavior. The signal in PFS is the convolution of the volume of the nascent domain and the probing volume of the tip. Here, we analyze the signal formation mechanism in PFS by deriving the main parameters of domain nucleation in a semi-infinite material and establishing the relationships between domain parameters and PFM signal using a linear Greens function theory. The effect of surface screening and finite Debye length on the switching behavior is established. In particular, we predict that the critical nucleus size in PFM is controlled by the surface screening mechanism and in the absence of screening, tip-induced switching is impossible. Future prospects of PFS to study domain nucleation in the vicinity of defects, local switching centers in ferroelectrics, and unusual polarization states in low-dimensional ferroelectrics are discussed.

cond-mat.mtrl-sci↗

arXiv2006

Resolution Function Theory in Piezoresponse Force Microscopy: Domain Wall Profile, Spatial Resolution, and Tip Calibration

Piezoresponse Force Microscopy (PFM) has emerged as a primary tool for imaging, domain engineering, and switching spectroscopy on ferroelectric materials. Quantitative interpretation of PFM data including measurements of the intrinsic width of the domain walls, geometric parameters of the domain below the tip in local hysteresis loop measurements, as well as interpretation of switching and coercive biases in terms of materials properties and switching mechanisms, requires reliable knowledge on electrostatic field structure produced by the tip. Using linear imaging theory, we develop a theoretical approach for interpretation of these measurements and determination of tip parameters from a calibration standard. The resolution and object transfer functions in PFM are derived and effect of materials parameters on resolution is determined. Closed form solutions for domain wall profiles in vertical and lateral PFM and signal from cylindrical domain in transversally isotropic piezoelectric are derived for point-charge and sphere-plane geometry of the tip.

cond-mat.mtrl-sci↗

arXiv2006

Electromechanical Detection in Scanning Probe Microscopy: Tip Models and Materials Contrast

The rapid development of nanoscience and nanotechnology in the last two decades was stimulated by the emergence of scanning probe microscopy (SPM) techniques capable of accessing local material properties, including transport, mechanical, and electromechanical behavior on the nanoscale. Here, we analyze the general principles of electromechanical probing by piezoresponse force microscopy (PFM), a scanning probe technique applicable to a broad range of piezoelectric and ferroelectric materials. The physics of image formation in PFM is compared to Scanning Tunneling Microscopy and Atomic Force Microscopy in terms of the tensorial nature of excitation and the detection signals and signal dependence on the tip-surface contact area. It is shown that its insensitivity to contact area, capability for vector detection, and strong orientational dependence render this technique a distinct class of SPM. The relationship between vertical and lateral PFM signals and material properties are derived analytically for two cases: transversally-isotropic piezoelectric materials in the limit of weak elastic anisotropy, and anisotropic piezoelectric materials in the limit of weak elastic and dielectric anisotropies. The integral representations for PFM response for fully anisotropic material are also obtained. The image formation mechanism for conventional (e.g., sphere and cone) and multipole tips corresponding to emerging shielded and strip-line type probes are analyzed. Resolution limits in PFM and possible applications for orientation imaging on the nanoscale and molecular resolution imaging are discussed.

cond-mat.mtrl-sci↗

arXiv2006

Domain Nucleation and Hysteresis Loop Shape in Piezoresponse Force Spectroscopy

Electromechanical hysteresis loop measurements in Piezoresponse Force Microscopy (Piezoresponse Force Spectroscopy) have emerged as a powerful technique for probing ferroelectric switching behavior on the nanoscale. Interpretation of PFS data requires the relationship between the domain parameters and PFM signal to be established. Here, we analyze the switching process using a modified point charge model for the electric field of the tip. The charge value and position are selected so that its electric field isopotential surface reproduces the tip with definite radius of curvature. Using linear theory of elasticity the relationship between the sizes of semiellipsoidal domain and PFM signal has been derived. The role of domain nucleation on piezoresponse hysteresis loop is established.

cond-mat.mtrl-sci↗

arXiv2006

Materials Contrast in Piezoresponse Force Microscopy

Piezoresponse Force Microscopy contrast in transversally isotropic material corresponding to the case of c+ - c- domains in tetragonal ferroelectrics is analyzed using Green's function theory by Felten et al. [J. Appl. Phys. 96, 563 (2004)]. A simplified expression for PFM signal as a linear combination of relevant piezoelectric constant are obtained. This analysis is extended to piezoelectric material of arbitrary symmetry with weak elastic and dielectric anisotropies. This result provides a framework for interpretation of PFM signals for systems with unknown or poorly known local elastic and dielectric properties, including nanocrystalline materials, ferroelectric polymers, and biopolymers.

cond-mat.mtrl-sci↗

arXiv2005

Recent Developments in Electromechanical Probing on the Nanoscale: Vector and Spectroscopic Imaging, Resolution, and Molecular Orientation Mapping

Strong coupling between electrical and mechanical phenomena and the presence of switchable polarization have enabled applications of ferroelectric materials for nonvolatile memories (FeRAM), data storage, and ferroelectric lithography. Understanding the local functionality of inorganic ferroelectrics including crystallographic orientation, piezoresponse, elasticity, and mechanisms for polarization switching, requires probing material structure and properties on the level of a single ferroelectric grain or domain. Here, I present recent studies on electromechanical, mechanical, and spectroscopic characterization of ferroelectric materials by Scanning Probe Microscopy. Three-dimensional electromechanical imaging, referred to as Vector Piezoresponse Force Microscopy, is presented. Nanoelectromechanics of PFM, including the structure of coupled electroelastic fields and tip-surface contact mechanics, is analyzed. This establishes a complete continuum mechanics description of the PFM and Atomic Force Acoustic Microscopy imaging mechanisms. Mechanism for local polarization switching is analyzed. The hysteresis loop shape is shown to be determined by the formation of the transient domain below the tip, the size of which increases with the tip bias. Spectroscopic imaging that allows relevant characteristics of switching process, such as imprint bias, pinning strength, remanent and saturation response, is introduced. Finally, resolution in PFM and vector PFM imaging of local crystallographic and molecular orientation and disorder is introduced.

cond-mat.mtrl-sci↗

arXiv2005

Dynamic Behavior in Piezoresponse Force Microscopy

Frequency dependent dynamic behavior in Piezoresponse Force Microscopy (PFM) implemented on a beam-deflection atomic force microscope (AFM) is analyzed using a combination of modeling and experimental measurements. The PFM signal comprises contributions from local electrostatic forces acting on the tip, distributed forces acting on the cantilever, and three components of the electromechanical response vector. These interactions result in the bending and torsion of the cantilever, detected as vertical and lateral PFM signals. The relative magnitudes of these contributions depend on geometric parameters of the system, the stiffness and frictional forces of tip-surface junction, and operation frequencies. The dynamic signal formation mechanism in PFM is analyzed and conditions for optimal PFM imaging are formulated. The experimental approach for probing cantilever dynamics using frequency-bias spectroscopy and deconvolution of electromechanical and electrostatic contrast is implemented.

cond-mat.mtrl-sci↗

arXiv2005

A Decade of Piezoresponse Force Microscopy: Progress, Challenges and Opportunities

Coupling between electrical and mechanical phenomena is a near-universal characteristic of inorganic and biological systems alike, with examples ranging from ferroelectric perovskites to electromotor proteins in cellular membranes. Understanding electromechanical functionality in materials such as ferroelectric nanocrystals, thin films, relaxor ferroelectrics, and biosystems requires probing these properties on the nanometer level of individual grain, domain, or protein fibril. In the last decade, Piezoresponse Force Microscopy (PFM) was established a powerful tool for nanoscale imaging, spectroscopy, and manipulation of ferroelectric and piezoelectric materials. Here, we present principles and recent advances in PFM, including vector and frequency dependent imaging of piezoelectric materials, briefly review applications for ferroelectric materials, discuss prospects for electromechanical imaging of local crystallographic and molecular orientations and disorder, and summarize future challenges and opportunities for PFM emerging in the second decade since its invention.

cond-mat.mtrl-sci↗

arXiv2005

Electromechanical Imaging of Biological Systems with Sub-10 nm Resolution

Electromechanical imaging of tooth dentin and enamel has been performed with sub-10 nm resolution using piezoresponse force microscopy. Characteristic piezoelectric domain size and local protein fiber ordering in dentin have been determined. The shape of a single collagen fibril in enamel is visualized in real space and local hysteresis loops are measured. Because of the ubiquitous presence of piezoelectricity in biological systems, this approach is expected to find broad application in high-resolution studies of a wide range of biomaterials.

cond-mat.mtrl-sci↗

arXiv2004

Nanoelectromechanics of Piezoresponse Force Microscopy

To achieve quantitative interpretation of Piezoresponse Force Microscopy (PFM), including resolution limits, tip bias- and strain-induced phenomena and spectroscopy, analytical representations for tip-induced electroelastic fields inside the material are derived for the cases of weak and strong indentation. In the weak indentation case, electrostatic field distribution is calculated using image charge model. In the strong indentation case, the solution of the coupled electroelastic problem for piezoelectric indentation is used to obtain the electric field and strain distribution in the ferroelectric material. This establishes a complete continuum mechanics description of the PFM contact mechanics and imaging mechanism. The electroelastic field distribution allows signal generation volume in PFM to be determined. These rigorous solutions are compared with the electrostatic point charge and sphere-plane models, and the applicability limits for asymptotic point charge and point force models are established. The implications of these results for ferroelectric polarization switching processes are analyzed.

cond-mat.mtrl-sci↗