arXiv subjects

Shengqiang Zhou

Publications and source records attributed to Shengqiang Zhou.

At least 19 recordsLinked to original sources

arXiv2026

Detecting Magnetic Phase Transitions in Ion-Irradiated CrSBr Through Resonant Raman Scattering

Controlling magnetic phases and accurately determining their transition temperatures are essential for the development of low-dimensional magnetic materials. Here, we demonstrate that He$^+$ ion irradiation provides a versatile route for engineering magnetic phases in layered CrSBr and establish temperature-dependent polarization-resolved Raman spectroscopy as a sensitive optical probe for identifying irradiation-induced magnetic phase transitions. We reveal that the magnetic response of the modified CrSBr is governed by both irradiation dose and crystal thickness. The temperature evolution of the Raman tensor elements resolves the antiferromagnetic transition in pristine CrSBr at T$_N \approx 132$ K as well as irradiation-induced magnetic transitions at T$_C \approx 105-110$ K and T$_D \approx 40$ K corresponding to ferromagnetic and defect-related magnetic phase transitions. Complementary magneto-optical measurements confirm the progressive suppression of antiferromagnetic order and the emergence of new defect-engineered magnetic phases, including pure ferromagnetic behavior at high irradiation doses. These findings establish irradiated CrSBr as a platform for controllable magnetic phase engineering while demonstrating polarization-resolved Raman spectroscopy as a rapid, non-destructive, and broadly applicable method for probing magnetic phase transitions in van der Waals magnets.

cond-mat.mtrl-sci↗

arXiv2025

Density-driven scattering and valley splitting in undoped Si/SiGe two-dimensional electron system

Undoped Si-SiGe two-dimensional electron gas (2DEG) provide an ideal platform for hosting quantum-dot spin-qubits owing enhanced spin dephasing times and compatibility with standard CMOS technology. The strained Si quantum well reduces the valley degeneracy into two closely spaced ones. The existence of a near-degenerate valley state act as a leakage channel and compromises gate fidelity. A robust and uniform valley splitting across the entire chip is crucial for achieving scalability in the architecture and reliability in operation. Imperfections such as broadened interfaces, alloy disorders and atomic steps significantly compromise the valley splitting. The associated scattering mechanisms play detrimental roles in the performance of the qubits. In this manuscript, exploiting low-temperature magnetotransport measurements, we investigate the scattering mechanisms and valley splitting in a high-mobility undoped Si-SiGe 2DEG. At lower carrier densities, transport is limited by remote impurity scattering, whereas at higher densities, background impurity scattering near the quantum well dominates. Both the transport and quantum lifetimes of the charge carriers increase with carrier concentration, due to the enhancement in the impurity screening. Magnetic-field-induced confinement effect also is found to improve the valley splitting. Current-biasing measurements reveals the role of carrier heating in the visibility of valley splitting and reveal a temperature limited valley splitting of approximately 100 micro-eV. These results provide critical insight into scattering-dominated regimes and valley splitting in undoped Si-SiGe, advancing its potential for silicon-based quantum devices.

cond-mat.mes-hall↗

arXiv2025

A high-performance all-silicon photodetector enabling telecom-wavelength detection at room temperature

Photonic integrated circuits (PICs) are crucial for advancing optical communications, promising substantial gains in data transmission speed, bandwidth, and energy efficiency compared to conventional electronics. Telecom-wavelength photodetectors, operating near 1550 nm, are indispensable in PICs, where they enable the sensitive and low-noise conversion of optical signals to electrical signals for efficient data processing. While silicon is ideal for passive optical components, its limited absorption in the optical telecommunication range (1260-1625 nm) typically necessitates integrating an alternative material, such as germanium, for photodetection - a process that introduces significant fabrication challenges. Here, we present a high-performance, all-silicon waveguide-coupled photodetector, which operates at room temperature within the optical telecom C band. By introducing deep-level impurities into silicon at concentrations close to the solid-solubility limit, we enable efficient sub-bandgap absorption without compromising recombination carrier lifetimes and mobilities. This detector achieves a responsivity of 0.56 A/W, a quantum efficiency of 44.8%, a bandwidth of 2 GHz, and a noise-equivalent power of 4.2E-10 W/Hz1/2 at 1550 nm, fulfilling requirements for telecom applications. Our approach provides a scalable and cost-effective solution for the monolithic integration of telecom-wavelength photodetectors into silicon-based PICs, advancing the development of compact photonic systems for modern communication infrastructures.

physics.optics↗

arXiv2025

Room-temperature alignment-free magnetometry with boron vacancies in hot-pressed hexagonal boron nitride

Magnetic field sensing is essential for applications in communication, environmental monitoring, and biomedical diagnostics. Quantum sensors based on solid-state spin defects, such as nitrogen-vacancy centers in diamond or boron vacancies in single-crystal hexagonal boron nitride (hBN), typically require precise alignment between the external magnetic field and the defect's spin quantization axis to achieve reliable sensing. This alignment constraint complicates device integration and hinders scalability. Here, we demonstrate room-temperature optically detected magnetic resonance (ODMR) from negatively charged boron vacancies (VB-) in commercially available hot-pressed polycrystalline hBN. The random grain orientation inherently samples a broad range of spin quantization axes, enabling alignment-free magnetic field detection. Numerical modeling further confirms that sensing remains feasible despite anisotropic sensitivity, establishing hot-pressed hBN as a robust and practical platform for quantum magnetometry. This approach paves the way toward low-cost, scalable, and mechanically stable quantum magnetic field sensors suitable for real-world deployment.

quant-ph↗

arXiv2025

Topotactic phase transition in epitaxial La0.7Sr0.3MnO3-δ films induced by oxygen getter assisted thermal annealing

Oxygen vacancies play a crucial role in controlling the physical properties of complex oxides. In La0.7Sr0.3MnO3-δ, the topotactic phase transition from Perovskite (PV) to Brownmillerite (BM) can be triggered e.g. via oxygen removal during thermal annealing. Here we report on a very efficient thermal vacuum annealing method using aluminum as an oxygen getter material. The topotactic phase transition is characterized by X-ray Diffraction which confirms a successful transition from PV to BM in La0.7Sr0.3MnO3-δ thin films grown via physical vapor deposition. The efficiency of this method is confirmed using La0.7Sr0.3MnO3-δ micron-sized bulk powder. The accompanying transition from the original Ferromagnetic (FM) to an Antiferromagnetic (AF) state and the simultaneous transition from a metallic to an insulating state is characterized using Superconducting Quantum Interference Device (SQUID)-magnetometry and Alternating Current (AC) resistivity measurements, respectively. The near surface manganese oxidation states are probed by synchrotron X-ray Absorption Spectroscopy. Moreover, X-ray Reflectivity, Atomic Force Microscopy and Scanning Transmission Electron Microscopy reveal surface segregation and cation redistribution during the oxygen getter assisted annealing process.

cond-mat.mtrl-sci↗

arXiv2025

Photon emission gain in Er doped Si light emitting diodes by impact excitation

This work demonstrates photon emission gain, i.e., emission of multiple photons per injected electron, through impact excitation in Er-doped silicon light-emitting diodes (LEDs). Conventional methods for exciting Er ions in silicon suffer from low efficiency due to mismatched energy transfer between exciton recombination and Er excitation. Here, we propose a reverse-biased Si PN junction diode where ballistically accelerated electrons induce inelastic collisions with Er ions, enabling tunable excitation via electric field modulation. Theoretical modeling reveals that photon emission gain arises from multiple impact excitations by a single electron traversing the electroluminescence region, with the gain value approximating the ratio of emission region width to electron mean free path, i.e., G = Lex/l. Experimental results show an internal quantum efficiency (IQE) of 1.84% at 78 K, representing a 20-fold enhancement over room-temperature performance. This work provides a critical foundation for on-chip integration of silicon-based communication-band lasers and quantum light sources.

physics.optics↗

arXiv2025

Optical spin readout of a silicon color center in the telecom L-band

Silicon-based quantum technologies have gained increasing attention due to their potential for large-scale photonic integration, long spin coherence times, and compatibility with CMOS fabrication. Efficient spin-photon interfaces are crucial for quantum networks, enabling entanglement distribution and information transfer over long distances. While several optically active quantum emitters in silicon have been investigated, no spin-active defect with optical transitions in the telecom L-band-a key wavelength range for low-loss fiber-based communication-has been experimentally demonstrated. Here, we demonstrate the optical detection of spin states in the C center, a carbon-oxygen defect in silicon that exhibits a zero-phonon line at 1571 nm. By combining optical excitation with microwave driving, we achieve optically detected magnetic resonance, enabling spin-state readout via telecom-band optical transitions. These findings provide experimental validation of recent theoretical predictions and mark a significant step toward integrating spin-based quantum functionalities into silicon photonic platforms, paving the way for scalable quantum communication and memory applications in the telecom L-band.

quant-ph↗

arXiv2024

Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast cooling

Shape memory alloys have a wide range of applications, including high stroke actuation, energy-efficient ferroic cooling, and energy harvesting. These applications are based on a reversible martensitic transformation, which results in a complex microstructure in the martensitic state. Understanding the formation of this microstructure after fast heating and cooling is crucial, as a high cycle frequency is essential for achieving high power density in the mentioned applications. This article uses an epitaxial Ni-Mn-Ga film as a model system to study the formation of the martensitic microstructure, since the high surface-to-volume ratio of thin films enables rapid heating and cooling, and since the formation of a multi-level hierarchical microstructure during slow cooling of this material system is already well understood. We apply a millisecond flash lamp pulse of varying energy density on the Ni-Mn-Ga film and analyse the hierarchical martensitic microstructure afterwards. Substantial differences compared to slow cooling occur, which we attribute to the limited time available for the microstructure to form and to the thermal stress between film and substrate during rapid temperature changes.

cond-mat.mtrl-sci↗

arXiv2024

Si1-x-yGeySnx alloy formation by Sn ion implantation and flash lamp annealing

For many years, Si1-yGey alloys have been applied in the semiconductor industry due to the ability to adjust the performance of Si-based nanoelectronic devices. Following this alloying approach of group-IV semiconductors, adding tin (Sn) into the alloy appears as the obvious next step, which leads to additional possibilities for tailoring the material properties. Adding Sn enables effective band gap and strain engineering and can improve the carrier mobilities, which makes Si1-x-yGeySnx alloys promising candidates for future opto- and nanoelectronics applications. The bottom-up approach for epitaxial growth of Si1-x-yGeySnx, e.g., by chemical vapor deposition and molecular beam epitaxy, allows tuning the material properties in the growth direction only; the realization of local material modifications to generate lateral heterostructures with such a bottom-up approach is extremely elaborate, since it would require the use of lithography, etching, and either selective epitaxy or epitaxy and chemical-mechanical polishing giving rise to interface issues, non-planar substrates, etc. This article shows the possibility of fabricating Si1-x-yGeySnx alloys by Sn ion beam implantation into Si1-yGey layers followed by millisecond-range flash lamp annealing (FLA). The materials are investigated by Rutherford backscattering spectrometry, micro Raman spectroscopy, X-ray diffraction, and transmission electron microscopy. The fabrication approach was adapted to ultra-thin Si1-yGey layers on silicon-on-insulator substrates. The results show the fabrication of single-crystalline Si1-x-yGeySnx with up to 2.3 at.% incorporated Sn without any indication of Sn segregation after recrystallization via FLA. Finally, we exhibit the possibility of implanting Sn locally in ultra-thin Si1-yGey films by masking unstructured regions on the chip.

cond-mat.mtrl-sci↗

arXiv2024

Structural changes in Ge1-xSnx and Si1-x-yGeySnx thin films on SOI substrates treated by pulse laser annealing

Ge1-xSnx and Si1-x-yGeySnx alloys are promising materials for future opto- and nanoelectronics applications. These alloys enable effective band-gap engineering, broad adjustability of their lattice parameter, exhibit much higher carrier mobility than pure Si, and are compatible with the CMOS technology. Unfortunately, the equilibrium solid solubility of Sn in Si1-xGex is less than 1% and the pseudomorphic growth of Si1-x-yGeySnx on Ge or Si can cause in-plane compressive strain in the grown layer, degrading the superior properties of these alloys. Therefore, post-growth strain engineering by ultrafast non-equilibrium thermal treatments like pulse laser annealing (PLA) is needed to improve the layer quality. In this article, Ge0.94Sn0.06 and Si0.14Ge0.8Sn0.06 thin films grown on silicon-on-insulator substrates by molecular beam epitaxy were post growth thermally treated by PLA. The material is analyzed before and after the thermal treatments by transmission electron microscopy, X-ray diffraction (XRD), Rutherford backscattering spectrometry, secondary ion mass spectrometry, and Hall effect measurements. It is shown that after annealing, the material is single-crystalline with improved crystallinity than the as-grown layer. This is reflected in a significantly increased XRD reflection intensity, well-ordered atomic pillars, and increased active carrier concentrations up to 4x1019 cm-3.

cond-mat.mtrl-sci↗

arXiv2024

Probing the band splitting near the $Γ$ point in the van der Waals magnetic semiconductor CrSBr

This study investigates the electronic band structure of Chromium Sulfur Bromide (CrSBr) through comprehensive photoluminescence (PL) characterization. We clearly identify low-temperature optical transitions between two closely adjacent conduction-band states and two different valence-band states. The analysis of the PL data robustly unveils energy splittings, bandgaps and excitonic transitions across different thicknesses of CrSBr, ranging from monolayer to bulk. Temperature-dependent PL measurements elucidate the stability of the band splitting below the Néel temperature, suggesting that magnons coupled with excitons are responsible for the symmetry breaking and brightening of the transitions from the secondary conduction band minimum (CBM2) to the global valence band maximum (VBM1). Collectively, these results not only reveal band splitting in both the conduction and valence bands, but also point to an intricate interplay between the optical, electronic and magnetic properties of antiferromagnetic two-dimensional van der Waals crystals.

cond-mat.mes-hall↗

arXiv2024

Strong Exciton-Phonon Coupling as a Fingerprint of Magnetic Ordering in van der Waals Layered CrSBr

The layered, air-stable van der Waals antiferromagnetic compound CrSBr exhibits pronounced coupling between its optical, electronic, and magnetic properties. As an example, exciton dynamics can be significantly influenced by lattice vibrations through exciton-phonon coupling. Using low-temperature photoluminescence spectroscopy, we demonstrate the effective coupling between excitons and phonons in nanometer-thick CrSBr. By careful analysis, we identify that the satellite peaks predominantly arise from the interaction between the exciton and an optical phonon with a frequency of 118 cm-1 (~14.6 meV) due to the out-of-plane vibration of Br atoms. Power-dependent and temperature-dependent photoluminescence measurements support exciton-phonon coupling and indicate a coupling between magnetic and optical properties, suggesting the possibility of carrier localization in the material. The presence of strong coupling between the exciton and the lattice may have important implications for the design of light-matter interactions in magnetic semiconductors and provides new insights into the exciton dynamics in CrSBr. This highlights the potential for exploiting exciton-phonon coupling to control the optical properties of layered antiferromagnetic materials.

cond-mat.mtrl-sci↗

arXiv2023

Ferromagnetic interlayer coupling in CrSBr crystals irradiated by ions

Layered magnetic materials are becoming a major platform for future spin-based applications. Particularly the air-stable van der Waals compound CrSBr is attracting considerable interest due to its prominent magneto-transport and magneto-optical properties. In this work, we observe a transition from antiferromagnetic to ferromagnetic behavior in CrSBr crystals exposed to high-energy, non-magnetic ions. Already at moderate fluences, ion irradiation induces a remanent magnetization with hysteresis adapting to the easy-axis anisotropy of the pristine magnetic order up to a critical temperature of 110 K. Structure analysis of the irradiated crystals in conjunction with density functional theory calculations suggest that the displacement of constituent atoms due to collisions with ions and the formation of interstitials favors ferromagnetic order between the layers.

cond-mat.mtrl-sci↗

arXiv2023

Intrinsic magnetic properties of the layered antiferromagnet CrSBr

Van der Waals magnetic materials are an ideal platform to study low-dimensional magnetism. Opposed to other members of this family, the magnetic semiconductor CrSBr is highly resistant to degradation in air, which, besides its exceptional optical, electronic, and magnetic properties, is the reason the compound is receiving considerable attention at the moment. For many years, its magnetic phase diagram seemed to be well-understood. Recently, however, several groups observed a magnetic transition in magnetometry measurements at temperatures of around 40 K that is not expected from theoretical considerations, causing a debate about the intrinsic magnetic properties of the material. In this letter, we report the absence of this particular transition in magnetization measurements conducted on high-quality CrSBr crystals, attesting to the extrinsic nature of the low-temperature magnetic phase observed in other works. Our magnetometry results obtained from large bulk crystals are in very good agreement with the magnetic phase diagram of CrSBr previously predicted by the mean-field theory; A-type antiferromagnetic order is the only phase observed below the Néel temperature at TN = 131 K. Moreover, numerical fits based on the Curie-Weiss law confirm that strong ferromagnetic correlations are present within individual layers even at temperatures much larger than TN.

cond-mat.mtrl-sci↗

arXiv2023

Aluminium substituted yttrium iron garnet thin films with reduced Curie temperature

Magnetic garnets such as yttrium iron garnet (Y$_3$Fe$_5$O$_{12}$, YIG) are widely used in spintronic and magnonic devices. Their magnetic and magneto-optical properties can be modified over a wide range by tailoring their chemical composition. Here, we report the successful growth of Al-substituted yttrium iron garnet (YAlIG) thin films via radio frequency sputtering in combination with an ex situ annealing step. Upon selecting appropriate process parameters, we obtain highly crystalline YAlIG films with different Al$^{3+}$ substitution levels on both, single crystalline Y$_3$Al$_5$O$_{12}$ (YAG) and Gd$_3$Ga$_5$O$_{12}$ (GGG) substrates. With increasing Al$^{3+}$ substitution levels, we observe a reduction of the saturation magnetisation as well as a systematic decrease of the magnetic ordering temperature to values well below room temperature. YAlIG thin films thus provide an interesting material platform for spintronic and magnonic experiments in different magnetic phases.

cond-mat.mtrl-sci↗

arXiv2023

All-electrical operation of a Curie-switch at room temperature

We present all-electrical operation of a Fe$_x$Cr$_{1-x}$-based Curie switch at room temperature. More specifically, we study the current-induced thermally-driven transition from ferromagnetic to antiferromagnetic Ruderman-Kittel-Kasuya-Yosida (RKKY) indirect coupling in a Fe/Cr/Fe$_{17.5}$Cr$_{82.5}$/Cr/Fe multilayer. Magnetometry measurements at different temperatures show that the transition from the ferromagnetic to the antiferromagnetic coupling at zero field is observed at $\sim$325K. Analytical modelling confirms that the observed temperature-dependent transition from indirect ferromagnetic to indirect antiferromangetic interlayer exchange coupling originates from the modification of the effective interlayer exchange constant through the ferromagnetic-to-paramagnetic transition in the Fe$_{17.5}$Cr$_{82.5}$ spacer with minor contributions from the thermally-driven variations of the magnetization and magnetic anisotropy of the Fe layers. Room-temperature current-in-plane magnetotransport measurements on the patterned Fe/Cr/Fe$_{17.5}$Cr$_{82.5}$/Cr/Fe strips show the transition from the 'low-resistance' parallel to the 'high-resistance' antiparallel remanent magnetization configuration, upon increased probing current density. Quantitative comparison of the switching fields, obtained by magnetometry and magnetotransport, confirms that the Joule heating is the main mechanism responsible for the observed current-induced resistive switching.

cond-mat.mtrl-sci↗

arXiv2023

Active Sites of Te-hyperdoped Silicon by Hard X-ray Photoelectron Spectroscopy

Multiple dopant configurations of Te impurities in close vicinity in silicon are investigated using photoelectron spectroscopy, photoelectron diffraction, and Bloch wave calculations. The samples are prepared by ion implantation followed by pulsed laser annealing. The dopant concentration is variable and high above the solubility limit of Te in silicon. The configurations in question are distinguished from isolated Te impurities by a strong chemical core level shift. While Te clusters are found to form only in very small concentrations, multi-Te configurations of type dimer or up to four Te ions surrounding a vacancy are clearly identified. For these configurations a substitutional site location of Te is found to match the data best in all cases. For isolated Te ions this matches the expectations. For multi-Te configurations the results contribute to understanding the exceptional activation of free charge carriers in hyperdoping of chalcogens in silicon.

cond-mat.mtrl-sci↗

arXiv2023

On-chip lateral Si:Te PIN photodiodes for room-temperature detection in the telecom optical wavelength bands

Photonic integrated circuits require photodetectors that operate at room temperature with sensitivity at telecom wavelengths and are suitable for integration with planar complementary-metal-oxide-semiconductor (CMOS) technology. Silicon hyperdoped with deep-level impurities is a promising material for silicon infrared detectors because of its strong room-temperature photoresponse in the short-wavelength infrared region caused by the creation of an impurity band within the silicon band gap. In this work, we present the first experimental demonstration of lateral Te-hyperdoped Si PIN photodetectors operating at room temperature in the optical telecom bands. We provide a detailed description of the fabrication process, working principle, and performance of the photodiodes, including their key figure of merits. Our results are promising for the integration of active and passive photonic elements on a single Si chip, leveraging the advantages of planar CMOS technology.

physics.optics↗