arXiv subjects

Shengqiang Zhou

Publications and source records attributed to Shengqiang Zhou.

At least 37 records · Page 2Linked to original sources

arXiv2023

On-chip lateral Si:Te PIN photodiodes for room-temperature detection in the telecom optical wavelength bands

Photonic integrated circuits require photodetectors that operate at room temperature with sensitivity at telecom wavelengths and are suitable for integration with planar complementary-metal-oxide-semiconductor (CMOS) technology. Silicon hyperdoped with deep-level impurities is a promising material for silicon infrared detectors because of its strong room-temperature photoresponse in the short-wavelength infrared region caused by the creation of an impurity band within the silicon band gap. In this work, we present the first experimental demonstration of lateral Te-hyperdoped Si PIN photodetectors operating at room temperature in the optical telecom bands. We provide a detailed description of the fabrication process, working principle, and performance of the photodiodes, including their key figure of merits. Our results are promising for the integration of active and passive photonic elements on a single Si chip, leveraging the advantages of planar CMOS technology.

physics.optics↗

arXiv2022

Tripling energy storage density through order-disorder transition induced polar nanoregions in PbZrO3 thin films by ion implantation

Dielectric capacitors are widely used in pulsed power electronic devices due to their ultrahigh power densities and extremely fast charge/discharge speed. To achieve enhanced energy storage density, both maximum polarization (Pmax) and breakdown strength (Eb) need to be improved simultaneously. However, these two key parameters are inversely correlated. In this study, order-disorder transition induced polar nanoregions (PNRs) have been achieved in PbZrO3 thin films by making use of the low-energy ion implantation, enabling us overcome the trade-off between high polarizability and breakdown strength, which leads to the tripling of the energy storage density from 20.5 J/cm3 to 62.3 J/cm3 as well as the great enhancement of breakdown strength. This approach could be extended to other dielectric oxides to improve the energy storage performance, providing a new pathway for tailoring the oxide functionalities.

cond-mat.mtrl-sci↗

arXiv2022

On Curie temperature of B20-MnSi films

B20-type MnSi is the prototype magnetic skyrmion material. Thin films of MnSi show a higher Curie temperature than their bulk counterpart. However, it is not yet clear what mechanism leads to the increase of the Curie temperature. In this work, we grow MnSi films on Si(100) and Si(111) substrates with a broad variation in their structures. By controlling the Mn thickness and annealing parameters, the pure MnSi phase of polycrystalline and textured nature as well as the mixed phase of MnSi and MnSi1.7 are obtained. Surprisingly, all these MnSi films show an increased Curie temperature of up to around 43 K. The Curie temperature is likely independent of the structural parameters within our accessibility including the film thickness above a threshold, strain, cell volume and the mixture with MnSi1.7. However, a pronounced phonon softening is observed for all samples, which can tentatively be attributed to slight Mn excess from stoichiometry, leading to the increased Curie temperature.

cond-mat.mtrl-sci↗

arXiv2022

Mid- and far-infrared localized surface plasmon resonances in chalcogen-hyperdoped silicon

Plasmonic sensing in the infrared region employs the direct interaction of the vibrational fingerprints of molecules with the plasmonic resonances, creating surface-enhanced sensing platforms that are superior than the traditional spectroscopy. However, the standard noble metals used for plasmonic resonances suffer from high radiative losses as well as fabrication challenges, such as tuning the spectral resonance positions into mid- to far-infrared regions, and the compatibility issue with the existing complementary metal-oxide-semiconductor (CMOS) manufacturing platform. Here, we demonstrate the occurrence of mid-infrared localized surface plasmon resonances (LSPR) in thin Si films hyperdoped with the known deep-level impurity tellurium. We show that the mid-infrared LSPR can be further enhanced and spectrally extended to the far-infrared range by fabricating two-dimensional arrays of micrometer-sized antennas in a Te-hyperdoped Si chip. Since Te-hyperdoped Si can also work as an infrared photodetector, we believe that our results will unlock the route toward the direct integration of plasmonic sensors with the one-chip CMOS platform, greatly advancing the possibility of mass manufacturing of high-performance plasmonic sensing systems.

cond-mat.mtrl-sci↗

arXiv2021

B20-MnSi films grown on Si(100) substrates with magnetic skyrmion signature

Magnetic skyrmions have been suggested as information carriers for future spintronic devices. As the first material with experimentally confirmed skyrmions, B20-type MnSi was the research focus for decades. Although B20-MnSi films have been successfully grown on Si(111) substrates, there is no report about B20-MnSi films on Si(100) substrates, which would be more preferred for practical applications. In this letter, we present the first preparation of B20-MnSi on Si(100) substrates. It is realized by sub-second solid-state reaction between Mn and Si via flash-lamp annealing at ambient pressure. The regrown layer shows an enhanced Curie temperature of 43 K compared with bulk B20-MnSi. The magnetic skyrmion signature is proved in our films by magnetic and transport measurements. The millisecond-range flash annealing provides a promising avenue for the fabrication of Si-based skyrmionic devices.

cond-mat.mtrl-sci↗

arXiv2021

Chlorine doping of MoSe2 flakes by ion implantation

The efficient integration of transition metal dichalcogenides (TMDs) into the current electronic device technology requires mastering the techniques of effective tuning of their optoelectronic properties. Specifically, controllable doping is essential. For conventional bulk semiconductors, ion implantation is the most developed method offering stable and tunable doping. In this work, we demonstrate n-type doping in MoSe2 flakes realized by low-energy ion implantation of Cl+ ions followed by millisecond-range flash lamp annealing (FLA). We further show that FLA for 3 ms with a peak temperature of about 1000 °C is enough to recrystallize implanted MoSe2. The Cl distribution in few-layer-thick MoSe2 is measured by secondary ion mass spectrometry. An increase in the electron concentration with increasing Cl fluence is determined from the softening and red shift of the Raman-active A_1g phonon mode due to the Fano effect. The electrical measurements confirm the n-type doping of Cl-implanted MoSe2. A comparison of the results of our density functional theory calculations and experimental temperature-dependent micro-Raman spectroscopy data indicates that Cl atoms are incorporated into the atomic network of MoSe2 as substitutional donor impurities.

cond-mat.mtrl-sci↗

arXiv2021

Enhanced trion emission in monolayer MoSe2 by constructing a type-I van der Waals heterostructure

Trions, quasi-particles consisting of two electrons combined with one hole or of two holes with one electron, have recently been observed in transition metal dichalcogenides (TMDCs) and drawn increasing attention due to potential applications of these materials in light-emitting diodes, valleytronic devices as well as for being a testbed for understanding many-body phenomena. Therefore, it is important to enhance the trion emission and its stability. In this study, we construct a MoSe2/FePS3 van der Waals heterostructure (vdWH) with type-I band alignment, which allows for carriers injection from FePS3 to MoSe2. At low temperatures, the neutral exciton (X0) emission in this vdWH is almost completely suppressed. The ITrion/Ix0 intensity ratio increases from 0.44 in a single MoSe2 monolayer to 20 in this heterostructure with the trion charging state changing from negative in the monolayer to positive in the heterostructure. The optical pumping with circularly polarized light shows a 14% polarization for the trion emission in MoSe2/FePS3. Moreover, forming such type-I vdWH also gives rise to a 20-fold enhancement of the room temperature photoluminescence from monolayer MoSe2. Our results demonstrate a novel approach to convert excitons to trions in monolayer 2D TMDCs via interlayer doping effect using type-I band alignment in vdWH.

cond-mat.mtrl-sci↗

arXiv2020

Silicon-based Intermediate-band Infrared Photodetector realized by Te Hyperdoping

Si-based photodetectors satisfy the criteria of low-cost and environmental-friendly, and can enable the development of on-chip complementary metal-oxide-semiconductor (CMOS)-compatible photonic systems. However, extending their room-temperature photoresponse into the mid-wavelength infrared (MWIR) regime remains challenging due to the intrinsic bandgap of Si. Here, we report on a comprehensive study of a room-temperature MWIR photodetector based on Si hyperdoped with Te. The demonstrated MWIR p-n photodiode exhibits a spectral photoresponse up to 5 μm and a slightly lower detector performance than the commercial devices in the wavelength range of 1.0-1.9 μm. We also investigate the correlation between the background noise and the sensitivity of the Te-hyperdoped Si photodiode, where the maximum room-temperature specific detectivity is found to be 3.2 x 10^12 cmHz^{1/2}W^{-1} and 9.2 x 10^8 cmHz^{1/2}W^{-1} at 1 μm and 1.55 μm, respectively. This work contributes to pave the way towards establishing a Si-based broadband infrared photonic system operating at room temperature.

physics.app-ph↗

arXiv2020

Dissolution of donor-vacancy clusters in heavily doped n-type germanium

The n-type doping of Ge is a self-limiting process due to the formation of vacancy-donor complexes (DnV with n <= 4) that deactivate the donors. This work unambiguously demonstrates that the dissolution of the dominating P4V clusters in heavily phosphorus-doped Ge epilayers can be achieved by millisecond-flash lamp annealing at about 1050 K. The P4V cluster dissolution increases the carrier concentration by more than three-fold together with a suppression of phosphorus diffusion. Electrochemical capacitance-voltage measurements in conjunction with secondary ion mass spectrometry, positron annihilation lifetime spectroscopy and theoretical calculations enabled us to address and understand a fundamental problem that has hindered so far the full integration of Ge with complementary-metal-oxide-semiconductor technology.

cond-mat.mtrl-sci↗

arXiv2020

Critical behavior of the insulator-to-metal transition in Te-hyperdoped Si

Hyperdoping Si with chalcogens is a topic of great interest due to the strong sub-bandgap absorption exhibited by the resulting material, which can be exploited to develop broadband room-temperature infrared photodetectors using fully Si-compatible technology. Here, we report on the critical behavior of the impurity-driven insulator-to-metal transition in Te-hyperdoped Si layers fabricated via ion implantation followed by nanosecond pulsed-laser melting. Electrical transport measurements reveal an insulator-to-metal transition, which is also confirmed and understood by density functional theory calculations. We demonstrate that the metallic phase is governed by a power law dependence of the conductivity at temperatures below 25 K, whereas the conductivity in the insulating phase is well described by a variable-range hopping mechanism with a Coulomb gap at temperatures in the range of 2-50 K. These results show that the electron wave-function in the vicinity of the transition is strongly affected by the disorder and the electron-electron interaction.

cond-mat.mtrl-sci↗

arXiv2020

Yu-Shiba-Rusinov bands in ferromagnetic superconducting diamond

The combination of different exotic properties in materials paves the way for the emergence of their new potential applications. An example is the recently found coexistence of the mutually antagonistic ferromagnetism and superconductivity in hydrogenated boron-doped diamond, which promises to be an attractive system with which to explore unconventional physics. Here, we show the emergence of Yu-Shiba-Rusinov (YSR) bands with a spatial extent of tens of nanometers in ferromagnetic superconducting diamond using scanning tunneling spectroscopy. We demonstrate theoretically how a two-dimensional (2D) spin lattice at the surface of a three-dimensional (3D) superconductor gives rise to the YSR bands, and how their density-of-states profile correlates with the spin lattice structure. The established strategy to realize new forms of the coexistence of ferromagnetism and superconductivity opens a way to engineer the unusual electronic states and also to design better performing superconducting devices.

cond-mat.supr-con↗

arXiv2020

Topological Hall effect in single thick SrRuO3 layers induced by defect engineering

The topological Hall effect (THE) has been discovered in ultrathin SrRuO3 (SRO) films, where the interface between the SRO layer and another oxide layer breaks the inversion symmetry resulting in the appearance of THE. Thus, THE only occurs in ultra-thin SRO films of several unit cells. In addition to employing a heterostructure, the inversion symmetry can be broken intrinsically in bulk SRO by introducing defects. In this study THE is observed in 60 nm thick SRO films, in which defects and lattice distortions are introduced by helium ion irradiation. The irradiated SRO films exhibit a pronounced THE in a wide temperature range from 5 K to 80 K. These observations can be attributed to the emergence of Dzyaloshinskii-Moriya interaction as a result of artificial inversion symmetry breaking associated to the lattice defect engineering. The creation and control of the THE in oxide single layers can be realized by ex situ film processing. Therefore, this work provides new insights into the THE and illustrates a promising strategy to design novel spintronics devices.

cond-mat.mtrl-sci↗

arXiv2020

Ion-Irradiation-Induced Cobalt/Cobalt Oxide Heterostructures: Printing 3D Interfaces

Interfaces separating ferromagnetic (FM) layers from non-ferromagnetic layers offer unique properties due to spin-orbit coupling and symmetry breaking, yielding effects such as exchange bias, perpendicular magnetic anisotropy, spin-pumping, spin-transfer torques, conversion between charge and spin currents and vice-versa. These interfacial phenomena play crucial roles for magnetic data storage and transfer applications, which require forming FM nano-structures embedded in non-ferromagnetic matrices. Here, we investigate the possiblity of creating such nano-structures by ion-irradiation. We study the effect of lateral confinement on the ion-irradiation-induced reduction of non-magnetic metal oxides (e.g., antiferro- or paramagnetic) to form ferromagnetic metals. Our findings are later exploited to form 3-dimensional magnetic interfaces between Co, CoO and Pt by spatially-selective irradiation of CoO/Pt multilayers. We demonstrate that the mechanical displacement of the O atoms plays a crucial role during the reduction from insulating, non-ferromagnetic cobalt oxides to metallic cobalt. Metallic cobalt yields both perpendicular magnetic anisotropy in the generated Co/Pt nano-structures, and, at low temperatures, exchange bias at vertical interfaces between Co and CoO. If pushed to the limit of ion-irradiation technology, this approach could, in principle, enable the creation of densely-packed, atomic scale ferromagnetic point-contact spin-torque oscillator (STO) networks, or conductive channels for current-confined-path based current perpendicular-to-plane giant magnetoresistance read-heads.

cond-mat.mtrl-sci↗

arXiv2019

Magneto-structural correlations in a systematically disordered B2 lattice

Ferromagnetism in certain B2 ordered alloys such as Fe$_{60}$Al$_{40}$ can be switched on, and tuned, via antisite disordering of the atomic arrangement. The disordering is accompanied by a $\sim$1 % increase in the lattice parameter. Here we performed a systematic disordering of B2 Fe$_{60}$Al$_{40}$ thin films, and obtained correlations between the order parameter ($S$), lattice parameter ($a_0$), and the induced saturation magnetization ($M_{s}$). As the lattice is gradually disordered, a critical point occurs at 1-$S$=0.6 and $a_0$=291 pm, where a sharp increase of the $M_{s}$ is observed. DFT calculations suggest that below the critical point the system magnetically behaves as it would still be fully ordered, whereas above, it is largely the increase of $a_0$ in the disordered state that determines the $M_{s}$. The insights obtained here can be useful for achieving tailored magnetic properties in alloys through disordering.

cond-mat.mtrl-sci↗

arXiv2019

p-type codoping effect in (Ga,Mn)As: Mn lattice location versus magnetic properties

In the present work, we perform a systematic investigation on p-type codoping in (Ga,Mn)As. Through gradually increasing Zn doping concentration, the hole concentration increases, which should theoretically lead to an increase of the Curie temperature (TC) according to the p-d Zener model. Unexpectedly, although the film keeps its epitaxial structure, both TC and the magnetization decrease. The samples present a phase transition from ferromagnetism to paramagnetism upon increasing hole concentration. In the intermediate regime, we observe a signature of antiferromagnetism. By using channeling Rutherford backscattering spectrometry and particle-induced x-ray emission, the substitutional Mn atoms are observed to shift to interstitial sites, while more Zn atoms occupy Ga sites, which explains the observed behavior. This is also consistent with first-principles calculations, showing that the complex of substitutional Zn and interstitial Mn has the lowest formation energy.

cond-mat.mtrl-sci↗

arXiv2019

Hole compensation effect in III-Mn-V dilute ferromagnetic semiconductors

A systematic study of hole compensation effect on magnetic properties, which is controlled by defect compensation through ion irradiation, in (Ga,Mn)As, (In,Mn)As and (Ga,Mn)P is presented in this work. In all materials, both Curie temperature and magnetization decrease upon increasing the hole compensation, confirming the description of hole mediated ferromagnetism according to the p-d Zener model. The material dependence of Curie temperature and magnetization versus hole compensation reveals that the manipulation of magnetic properties in III-Mn-V dilute ferromagnetic semiconductors by ion irradiation is strongly influenced by the energy level location of the produced defect relative to the band edges in semiconductors.

cond-mat.mtrl-sci↗

arXiv2019

Superconductivity in single-crystalline, aluminum- and gallium-hyperdoped germanium

Superconductivity in group IV semiconductors is desired for hybrid devices combining both semiconducting and superconducting properties. Following boron doped diamond and Si, superconductivity has been observed in gallium doped Ge, however the obtained specimen is in polycrystalline form [Herrmannsdörfer et al., Phys. Rev. Lett. 102, 217003 (2009)]. Here, we present superconducting single-crystalline Ge hyperdoped with gallium or aluminium by ion implantation and rear-side flash lamp annealing. The maximum concentration of Al and Ga incorporated into substitutional positions in Ge is eight times higher than the equilibrium solid solubility. This corresponds to a hole concentration above 10^21 cm-3. Using density functional theory in the local density approximation and pseudopotential plane-wave approach, we show that the superconductivity in p-type Ge is phonon-mediated. According to the ab initio calculations the critical superconducting temperature for Al- and Ga-doped Ge is in the range of 0.45 K for 6.25 at.% of dopant concentration being in a qualitative agreement with experimentally obtained values.

cond-mat.mtrl-sci↗

arXiv2019

Tuning the metal-insulator transition in epitaxial SrVO3 films by uniaxial strain

Understanding of the metal-insulator transition (MIT) in correlated transition-metal oxides is a fascinating topic in condensed matter physics and a precise control of such transitions plays a key role in developing novel electronic devices. Here we report an effective tuning of the MIT in epitaxial SrVO3 (SVO) films by expanding the out-of-plane lattice constant without changing in-plane lattice parameters, through helium ion irradiation. Upon increase of the ion fluence, we observe a MIT with a crossover from metallic to insulating state in SVO films. A combination of transport and magnetoresistance measurements in SVO at low temperatures reveals that the observed MIT is mainly ascribed to electron-electron interactions rather than disorder-induced localization. Moreover, these results are well supported by the combination of density functional theory and dynamical mean field theory (DFT+DMFT) calculations, further confirming the decrease of the bandwidth and the enhanced electron-electron interactions resulting from the expansion of out-of-plane lattice constant. These findings provide new insights into the understanding of MIT in correlated oxides and perspectives for the design of unexpected functional devices based on strongly correlated electrons.

cond-mat.mtrl-sci↗