arXiv subjects

Shi Jin

Publications and source records attributed to Shi Jin.

At least 271 records · Page 15Linked to original sources

arXiv2024

Delay Alignment Modulation with Hybrid Analog/Digital Beamforming for Millimeter Wave and Terahertz Communications

For millimeter wave (mmWave) or Terahertz (THz) communications, by leveraging the high spatial resolution offered by large antenna arrays and the multi-path sparsity of mmWave/THz channels, a novel inter-symbol interference (ISI) mitigation technique called delay alignment modulation (DAM) has been recently proposed. The key ideas of DAM are delay pre-compensation and path-based beamforming. However, existing research on DAM is mainly based on fully digital beamforming, which requires the number of radio frequency (RF) chains to be equal to the number of antennas. This paper proposes the hybrid analog/digital beamforming based DAM, including both fully and partially connected structures. The analog and digital beamforming matrices are designed to achieve performance close to DAM based on fully digital beamforming. While DAM was considered for the path-based channel model with integer delays in the previous work, this paper extends DAM to a more general tap-based model that accounts for fractional path delays. To further reduce the cost of channel estimation and improve the performance for wireless channels with fractional delays, DAM with codebook-based beam alignment and DAM-orthogonal frequency division multiplexing (DAM-OFDM) with hybrid beamforming are proposed. The effectiveness of the proposed techniques is verified by extensive simulation results.

eess.SP↗

arXiv2024

Fluid Antenna-enabled Integrated Sensing, Communication, and Computing Systems

The current integrated sensing, communication, and computing (ISCC) systems face significant challenges in both efficiency and resource utilization. To tackle these issues, we propose a novel fluid antenna (FA)-enabled ISCC system, specifically designed for vehicular networks. We develop detailed models for the communication and sensing processes to support this architecture. An integrated latency optimization problem is formulated to jointly optimize computing resources, receive combining matrices, and antenna positions. To tackle this complex problem, we decompose it into three sub-problems and analyze each separately. A mixed optimization algorithm is then designed to address the overall problem comprehensively. Numerical results demonstrate the rapid convergence of the proposed algorithm. Compared with baseline schemes, the FA-enabled vehicle ISCC system significantly improves resource utilization and reduces latency for communication, sensing, and computation.

cs.IT↗

arXiv2024

Electromagnetic Property Sensing and Channel Reconstruction Based on Diffusion Schrödinger Bridge in ISAC

Integrated sensing and communications (ISAC) has emerged as a transformative paradigm for next-generation wireless systems. In this paper, we present a novel ISAC scheme that leverages the diffusion Schrodinger bridge (DSB) to realize the sensing of electromagnetic (EM) property of a target as well as the reconstruction of the wireless channel. The DSB framework connects EM property sensing and channel reconstruction by establishing a bidirectional process: the forward process transforms the distribution of EM property into the channel distribution, while the reverse process reconstructs the EM property from the channel. To handle the difference in dimensionality between the high-dimensional sensing channel and the lower-dimensional EM property, we generate latent representations using an autoencoder network. The autoencoder compresses the sensing channel into a latent space that retains essential features, which incorporates positional embeddings to process spatial context. The simulation results demonstrate the effectiveness of the proposed DSB framework, which achieves superior reconstruction of the targets shape, relative permittivity, and conductivity. Moreover, the proposed method can also realize high-fidelity channel reconstruction given the EM property of the target. The dual capability of accurately sensing the EM property and reconstructing the channel across various positions within the sensing area underscores the versatility and potential of the proposed approach for broad application in future ISAC systems.

eess.SP↗

arXiv2024

Efficient Deep Learning-based Cascaded Channel Feedback in RIS-Assisted Communications

In the realm of reconfigurable intelligent surface (RIS)-assisted communication systems, the connection between a base station (BS) and user equipment (UE) is formed by a cascaded channel, merging the BS-RIS and RIS-UE channels. Due to the fixed positioning of the BS and RIS and the mobility of UE, these two channels generally exhibit different time-varying characteristics, which are challenging to identify and exploit for feedback overhead reduction, given the separate channel estimation difficulty. To address this challenge, this letter introduces an innovative deep learning-based framework tailored for cascaded channel feedback, ingeniously capturing the intrinsic time variation in the cascaded channel. When an entire cascaded channel has been sent to the BS, this framework advocates the feedback of an efficient representation of this variation within a subsequent period through an extraction-compression scheme. This scheme involves RIS unit-grained channel variation extraction, followed by autoencoder-based deep compression to enhance compactness. Numerical simulations confirm that this feedback framework significantly reduces both the feedback and computational burdens.

eess.SP↗

arXiv2024

Fast Adaptation for Deep Learning-based Wireless Communications

The integration with artificial intelligence (AI) is recognized as one of the six usage scenarios in next-generation wireless communications. However, several critical challenges hinder the widespread application of deep learning (DL) techniques in wireless communications. In particular, existing DL-based wireless communications struggle to adapt to the rapidly changing wireless environments. In this paper, we discuss fast adaptation for DL-based wireless communications by using few-shot learning (FSL) techniques. We first identify the differences between fast adaptation in wireless communications and traditional AI tasks by highlighting two distinct FSL design requirements for wireless communications. To establish a wide perspective, we present a comprehensive review of the existing FSL techniques in wireless communications that satisfy these two design requirements. In particular, we emphasize the importance of applying domain knowledge in achieving fast adaptation. We specifically focus on multiuser multiple-input multiple-output (MU-MIMO) precoding as an examples to demonstrate the advantages of the FSL to achieve fast adaptation in wireless communications. Finally, we highlight several open research issues for achieving broadscope future deployment of fast adaptive DL in wireless communication applications.

cs.NI↗

arXiv2024

Meta-Learning Empowered Graph Neural Networks for Radio Resource Management

In this paper, we consider a radio resource management (RRM) problem in the dynamic wireless networks, comprising multiple communication links that share the same spectrum resource. To achieve high network throughput while ensuring fairness across all links, we formulate a resilient power optimization problem with per-user minimum-rate constraints. We obtain the corresponding Lagrangian dual problem and parameterize all variables with neural networks, which can be trained in an unsupervised manner due to the provably acceptable duality gap. We develop a meta-learning approach with graph neural networks (GNNs) as parameterization that exhibits fast adaptation and scalability to varying network configurations. We formulate the objective of meta-learning by amalgamating the Lagrangian functions of different network configurations and utilize a first-order meta-learning algorithm, called Reptile, to obtain the meta-parameters. Numerical results verify that our method can efficiently improve the overall throughput and ensure the minimum rate performance. We further demonstrate that using the meta-parameters as initialization, our method can achieve fast adaptation to new wireless network configurations and reduce the number of required training data samples.

eess.SP↗

arXiv2024

Semantic Communication for Cooperative Perception using HARQ

Cooperative perception, offering a wider field of view than standalone perception, is becoming increasingly crucial in autonomous driving. This perception is enabled through vehicle-to-vehicle (V2V) communication, allowing connected automated vehicles (CAVs) to exchange sensor data, such as light detection and ranging (LiDAR) point clouds, thereby enhancing the collective understanding of the environment. In this paper, we leverage an importance map to distill critical semantic information, introducing a cooperative perception semantic communication framework that employs intermediate fusion. To counter the challenges posed by time-varying multipath fading, our approach incorporates the use of orthogonal frequency-division multiplexing (OFDM) along with channel estimation and equalization strategies. Furthermore, recognizing the necessity for reliable transmission, especially in the low SNR scenarios, we introduce a novel semantic error detection method that is integrated with our semantic communication framework in the spirit of hybrid automatic repeated request (HARQ). Simulation results show that our model surpasses the traditional separate source-channel coding methods in perception performance, both with and without HARQ. Additionally, in terms of throughput, our proposed HARQ schemes demonstrate superior efficiency to the conventional coding approaches.

cs.IT↗

arXiv2024

Resource Efficient Asynchronous Federated Learning for Digital Twin Empowered IoT Network

As an emerging technology, digital twin (DT) can provide real-time status and dynamic topology mapping for Internet of Things (IoT) devices. However, DT and its implementation within industrial IoT networks necessitates substantial, distributed data support, which often leads to ``data silos'' and raises privacy concerns. To address these issues, we develop a dynamic resource scheduling algorithm tailored for the asynchronous federated learning (FL)-based lightweight DT empowered IoT network. Specifically, our approach aims to minimize a multi-objective function that encompasses both energy consumption and latency by optimizing IoT device selection and transmit power control, subject to FL model performance constraints. We utilize the Lyapunov method to decouple the formulated problem into a series of one-slot optimization problems and develop a two-stage optimization algorithm to achieve the optimal transmission power control and IoT device scheduling strategies. In the first stage, we derive closed-form solutions for optimal transmit power on the IoT device side. In the second stage, since partial state information is unknown, e.g., the transmitting power and computational frequency of IoT device, the edge server employs a multi-armed bandit (MAB) framework to model the IoT device selection problem and utilizes an efficient online algorithm, namely the client utility-based upper confidence bound (CU-UCB), to address it. Numerical results validate our algorithm's superiority over benchmark schemes, and simulations demonstrate that our algorithm achieves faster training speeds on the Fashion-MNIST and CIFAR-10 datasets within the same training duration.

cs.DC↗

arXiv2024

RBMD: A molecular dynamics package enabling to simulate 10 million all-atom particles in a single graphics processing unit

This paper introduces a random-batch molecular dynamics (RBMD) package for fast simulations of particle systems at the nano/micro scale. Different from existing packages, the RBMD uses random batch methods for nonbonded interactions of particle systems. The long-range part of Coulomb interactions is calculated in Fourier space by the random batch Ewald algorithm, which achieves linear complexity and superscalability, surpassing classical lattice-based Ewald methods. For the short-range part, the random batch list algorithm is used to construct neighbor lists, significantly reducing both computational and memory costs. The RBMD is implemented on GPU-CPU heterogeneous architectures, with classical force fields for all-atom systems. Benchmark systems are used to validate accuracy and performance of the package. Comparison with the particle-particle particle-mesh method and the Verlet list method in the LAMMPS package is performed on three different NVIDIA GPUs, demonstrating high efficiency of the RBMD on heterogeneous architectures. Our results also show that the RBMD enables simulations on a single GPU with a CPU core up to 10 million particles. Typically, for systems of one million particles, the RBMD allows simulating all-atom systems with a high efficiency of 8.20 ms per step, demonstrating the attractive feature for running large-scale simulations of practical applications on a desktop machine.

physics.comp-ph↗

arXiv2024

Rotatable Block-Controlled RIS: Bridging the Performance Gap to Element-Controlled Systems

The passive reconfigurable intelligent surface (RIS) requires numerous elements to achieve adequate array gain, which linearly increases power consumption (PC) with the number of reflection phases. To address this, this letter introduces a rotatable block-controlled RIS (BC-RIS) that preserves spectral efficiency (SE) while reducing power costs. Unlike the element-controlled RIS (EC-RIS), which necessitates independent phase control for each element, the BC-RIS uses a single phase control circuit for each block, substantially lowering power requirements. In the maximum ratio transmission, by customizing specular reflection channels through the rotation of blocks and coherently superimposing signals with optimized reflection phase of blocks, the BC-RIS achieves the same averaged SE as the EC-RIS. To counteract the added power demands from rotation, influenced by block size, we have developed a segmentation scheme to minimize overall PC. Furthermore, constraints for rotation power-related parameters have been established to enhance the energy efficiency of the BC-RIS compared to the EC-RIS. Numerical results confirm that this approach significantly improves energy efficiency while maintaining performance.

cs.IT↗

arXiv2024

Mid-Band Extra Large-Scale MIMO System: Channel Modeling and Performance Analysis

In pursuit of enhanced quality of service and higher transmission rates, communication within the mid-band spectrum, such as bands in the 6-15 GHz range, combined with extra large-scale multiple-input multiple-output (XL-MIMO), is considered a potential enabler for future communication systems. However, the characteristics introduced by mid-band XL-MIMO systems pose challenges for channel modeling and performance analysis. In this paper, we first analyze the potential characteristics of mid-band MIMO channels. Then, an analytical channel model incorporating novel channel characteristics is proposed, based on a review of classical analytical channel models. This model is convenient for theoretical analysis and compatible with other analytical channel models. Subsequently, based on the proposed channel model, we analyze key metrics of wireless communication, including the ergodic spectral efficiency (SE) and outage probability (OP) of MIMO maximal-ratio combining systems. Specifically, we derive closed-form approximations and performance bounds for two typical scenarios, aiming to illustrate the influence of mid-band XL-MIMO systems. Finally, comparisons between systems under different practical configurations are carried out through simulations. The theoretical analysis and simulations demonstrate that mid-band XL-MIMO systems excel in SE and OP due to the increased array elements, moderate large-scale fading, and enlarged transmission bandwidth.

cs.IT↗

arXiv2024

Capacity Maximization for FAS-assisted Multiple Access Channels

This paper investigates a multiuser millimeter-wave (mmWave) uplink system in which each user is equipped with a multi-antenna fluid antenna system (FAS) while the base station (BS) has multiple fixed-position antennas. Our primary objective is to maximize the system capacity by optimizing the transmit covariance matrices and the antenna position vectors of the users jointly. To gain insights, we start by deriving upper bounds and approximations for the capacity. Then we delve into the capacity maximization problem. Beginning with the simple scenario of a single user equipped with a single-antenna FAS, we demonstrate that a closed-form optimal solution exists when there are only two propagation paths between the user and the BS. In the case where multiple propagation paths are present, a near-optimal solution can also be obtained through a one-dimensional search method. Expanding our focus to multiuser cases, in which users are equipped with either single- or multi-antenna FAS, we show that the original capacity maximization problems can be reformulated into distinct rank-one programmings. Then, we propose alternating optimization algorithms to deal with the transformed problems. Simulation results indicate that FAS can improve the capacity of the multiple access channel (MAC) greatly, and the proposed algorithms outperform all the benchmarks.

cs.IT↗

arXiv2024

GRLinQ: An Intelligent Spectrum Sharing Mechanism for Device-to-Device Communications with Graph Reinforcement Learning

Device-to-device (D2D) spectrum sharing in wireless communications is a challenging non-convex combinatorial optimization problem, involving entangled link scheduling and power control in a large-scale network. The state-of-the-art methods, either from a model-based or a data-driven perspective, exhibit certain limitations such as the critical need for channel state information (CSI) and/or a large number of (solved) instances (e.g., network layouts) as training samples. To advance this line of research, we propose a novel hybrid model/datadriven spectrum sharing mechanism with graph reinforcement learning for link scheduling (GRLinQ), injecting information theoretical insights into machine learning models, in such a way that link scheduling and power control can be solved in an intelligent yet explainable manner. Through an extensive set of experiments, GRLinQ demonstrates superior performance to the existing model-based and data-driven link scheduling and/or power control methods, with a relaxed requirement for CSI, a substantially reduced number of unsolved instances as training samples, a possible distributed deployment, reduced online/offline computational complexity, and more remarkably excellent scalability and generalizability over different network scenarios and system configurations.

cs.NI↗

arXiv2024

Movable Antenna for Wireless Communications:Prototyping and Experimental Results

Movable antenna (MA), which can flexibly change the position of antenna in three-dimensional (3D) continuous space, is an emerging technology for achieving full spatial performance gains. In this paper, a prototype of MA communication system with ultra-accurate movement control is presented to verify the performance gain of MA in practical environments. The prototype utilizes the feedback control to ensure that each power measurement is performed after the MA moves to a designated position. The system operates at 3.5 GHz or 27.5 GHz, where the MA moves along a one-dimensional horizontal line with a step size of 0.01λ and in a two-dimensional square region with a step size of 0.05λ, respectively, with λ denoting the signal wavelength. The scenario with mixed line-of-sight (LoS) and non-LoS (NLoS) links is considered. Extensive experimental results are obtained with the designed prototype and compared with the simulation results, which validate the great potential of MA technology in improving wireless communication performance. For example, the maximum variation of measured power reaches over 40 dB and 23 dB at 3.5 GHz and 27.5 GHz, respectively, thanks to the flexible antenna movement. In addition, experimental results indicate that the power gain of MA system relies on the estimated path state information (PSI), including the number of paths, their delays, elevation and azimuth angles of arrival (AoAs), as well as the power ratio of each path.

cs.IT↗

arXiv2024

Enhancing Spatial Multiplexing and Interference Suppression for Near- and Far-Field Communications with Sparse MIMO

Multiple-input multiple-output has been a key technology for wireless systems for decades. For typical MIMO communication systems, antenna array elements are usually separated by half of the carrier wavelength, thus termed as conventional MIMO. In this paper, we investigate the performance of multi-user MIMO communication, with sparse arrays at both the transmitter and receiver side, i.e., the array elements are separated by more than half wavelength. Given the same number of array elements, the performance of sparse MIMO is compared with conventional MIMO. On one hand, sparse MIMO has a larger aperture, which can achieve narrower main lobe beams that make it easier to resolve densely located users. Besides, increased array aperture also enlarges the near-field communication region, which can enhance the spatial multiplexing gain, thanks to the spherical wavefront property in the near-field region. On the other hand, element spacing larger than half wavelength leads to undesired grating lobes, which, if left unattended, may cause severe inter-user interference. To gain further insights, we first study the spatial multiplexing gain of the basic single-user sparse MIMO communication system, where a closed-form expression of the near-field effective degree of freedom is derived. The result shows that the EDoF increases with the array sparsity for sparse MIMO before reaching its upper bound, which equals to the minimum value between the transmit and receive antenna numbers. Furthermore, the scaling law for the achievable data rate with varying array sparsity is analyzed and an array sparsity-selection strategy is proposed. We then consider the more general multi-user sparse MIMO communication system. It is shown that sparse MIMO is less likely to experience severe IUI than conventional MIMO.

eess.SP↗

arXiv2024

Integrated Communications and Security: RIS-Assisted Simultaneous Transmission and Generation of Secret Keys

We develop a new integrated communications and security (ICAS) design paradigm by leveraging the concept of reconfigurable intelligent surfaces (RISs). In particular, we propose RIS-assisted simultaneous transmission and secret key generation by sharing the RIS for these two tasks. Specifically, the legitimate transceivers intend to jointly optimize the data transmission rate and the key generation rate by configuring the phase-shift of the RIS in the presence of a smart attacker. We first derive the key generation rate of the RIS-assisted physical layer key generation (PLKG). Then, to obtain the optimal RIS configuration, we formulate the problem as a secure transmission (ST) game and prove the existence of the Nash equilibrium (NE), and then derive the NE point of the static game. For the dynamic ST game, we model the problem as a finite Markov decision process and propose a model-free reinforcement learning approach to obtain the NE point. Particularly, considering that the legitimate transceivers cannot obtain the channel state information (CSI) of the attacker in real-world conditions, we develop a deep recurrent Q-network (DRQN) based dynamic ST strategy to learn the optimal RIS configuration. The details of the algorithm are provided, and then, the system complexity is analyzed. Our simulation results show that the proposed DRQN based dynamic ST strategy has a better performance than the benchmarks even with a partial observation information, and achieves "one time pad" communication by allocating a suitable weight factor for data transmission and PLKG.

cs.CR↗

arXiv2024

Near-field Integrated Sensing and Communication: Opportunities and Challenges

With the extremely large-scale array XL-array deployed in future wireless systems, wireless communication and sensing are expected to operate in the radiative near-field region, which needs to be characterized by the spherical rather than planar wavefronts. Unlike most existing works that considered far-field integrated sensing and communication (ISAC), we study in this article the new near-field ISAC, which integrates both functions of sensing and communication in the near-field region. To this end, we first discuss the appealing advantages of near-field communication and sensing over their far-field counterparts, respectively. Then, we introduce three approaches for near-field ISAC, including joint near-field communication and sensing, sensing-assisted near-field communication, and communication-assisted near-field sensing. We discuss their individual research opportunities, new design issues, as well as propose promising solutions. Finally, several important directions in near-field ISAC are also highlighted to motivate future work.

cs.IT↗

arXiv2024

Mini-Batch Gradient-Based MCMC for Decentralized Massive MIMO Detection

Massive multiple-input multiple-output (MIMO) technology has significantly enhanced spectral and power efficiency in cellular communications and is expected to further evolve towards extra-large-scale MIMO. However, centralized processing for massive MIMO faces practical obstacles, including excessive computational complexity and a substantial volume of baseband data to be exchanged. To address these challenges, decentralized baseband processing has emerged as a promising solution. This approach involves partitioning the antenna array into clusters with dedicated computing hardware for parallel processing. In this paper, we investigate the gradient-based Markov chain Monte Carlo (MCMC) method -- an advanced MIMO detection technique known for its near-optimal performance in centralized implementation -- within the context of a decentralized baseband processing architecture. This decentralized design mitigates the computation burden at a single processing unit by utilizing computational resources in a distributed and parallel manner. Additionally, we integrate the mini-batch stochastic gradient descent method into the proposed decentralized detector, achieving remarkable performance with high efficiency. Simulation results demonstrate substantial performance gains of the proposed method over existing decentralized detectors across various scenarios. Moreover, complexity analysis reveals the advantages of the proposed decentralized strategy in terms of computation delay and interconnection bandwidth when compared to conventional centralized detectors.

cs.IT↗