arXiv subjects

Shi Jin

Publications and source records attributed to Shi Jin.

At least 289 records · Page 16Linked to original sources

arXiv2024

Time-Domain Channel Measurements and Small-Scale Fading Characterization for RIS-Assisted Wireless Communication Systems

Reconfigurable intelligent surfaces (RISs) have attracted extensive attention from industry and academia. In RIS-assisted wireless communication systems, practical channel measurements and modeling serve as the foundation for system design, network optimization, and performance evaluation. In this paper, a RIS time-domain channel measurement system, based on a software defined radio platform, is developed for the first time to investigate the small-scale fading characteristics of RIS-assisted channels. We present RIS channel measurements in corridor and laboratory scenarios and compare the power delay profile of the channel without RIS, with RIS specular reflection, and with RIS intelligent reflection. The multipath component parameters and cluster parameters based on the Saleh-Valenzuela model are extracted. We find that the power delay profiles (PDPs) of the RIS-assisted channel fit the power-law decay model better than the common exponential decay model and approximate the law of square decay. Through intelligent reflection, the RIS can decrease the delay and concentrate the energy of the virtual line-of-sight (VLoS) path, thereby reducing the delay spread and mitigating multipath fading. Furthermore, the cluster characteristics of RIS-assisted channels are highly dependent on the measurement environment. In the laboratory scenario, a single cluster dominated by the VLoS path with smooth envelope is observed. On the other hand, in the corridor scenario, some additional clusters introduced by the RIS reflection are created.

cs.IT↗

arXiv2024

Unified Far-Field and Near-Field in Holographic MIMO: A Wavenumber-Domain Perspective

This article conceives a unified representation for near-field and far-field holographic multiple-input multiple-output (HMIMO) channels, addressing a practical design dilemma: "Why does the angular-domain representation no longer function effectively?" To answer this question, we pivot from the angular domain to the wavenumber domain and present a succinct overview of its underlying philosophy. In re-examining the Fourier plane-wave series expansion that recasts spherical propagation waves into a series of plane waves represented by Fourier harmonics, we characterize the HMIMO channel employing these Fourier harmonics having different wavenumbers. This approach, referred to as the wavenumebr-domain representation, facilitates a unified view across the far-field and the near-field. Furthermore, the limitations of the DFT basis are demonstrated when identifying the sparsity inherent to the HMIMO channel, motivating the development of a wavenumber-domain basis as an alternative. We then present some preliminary applications of the proposed wavenumber-domain basis in signal processing across both the far-field and near-field, along with several prospects for future HMIMO system designs based on the wavenumber domain.

cs.IT↗

arXiv2024

AP-MIONet: Asymptotic-preserving multiple-input neural operators for capturing the high-field limits of collisional kinetic equations

In kinetic equations, external fields play a significant role, particularly when their strength is sufficient to balance collision effects, leading to the so-called high-field regime. Two typical examples are the Vlasov-Poisson-Fokker-Planck (VPFP) system in plasma physics and the Boltzmann equation in semiconductor physics. In this paper, we propose a generic asymptotic-preserving multiple-input DeepONet (AP-MIONet) method for solving these two kinetic equations with variable parameters in the high-field regime. Our method aims to tackle two major challenges in this regime: the additional variable parameters introduced by electric fields, and the absence of an explicit local equilibrium, which is a key component of asymptotic-preserving (AP) schemes. We leverage the multiple-input DeepONet (MIONet) architecture to accommodate additional parameters, and formulate the AP loss function by incorporating both the mass conservation law and the original kinetic system. This strategy can avoid reliance on the explicit local equilibrium, preserve the mass and adapt to non-equilibrium states. We demonstrate the effectiveness and efficiency of the proposed method through extensive numerical examples.

math.NA↗

arXiv2024

Fixed and Movable Antenna Technology for 6G Integrated Sensing and Communication

By deploying antenna arrays at the transmitter/receiver to provide additional spatial-domain degrees of freedom (DoFs), multi-antenna technology greatly improves the reliability and efficiency of wireless communication. Meanwhile, the application of multi-antenna technology in the radar field has achieved spatial angle resolution and improved sensing DoF, thus significantly enhancing wireless sensing performance. However, wireless communication and radar sensing have undergone independent development over the past few decades. As a result, although multi-antenna technology has dramatically advanced in these two fields separately, it has not been deeply integrated by exploiting their synergy. A new opportunity to fill up this gap arises as the integration of sensing and communication has been identified as one of the typical usage scenarios of the 6G communication network. Motivated by the above, this article aims to explore the multi-antenna technology for 6G ISAC, with the focus on its future development trends such as continuous expansion of antenna array scale, more diverse array architectures, and more flexible antenna designs. First, we introduce several new and promising antenna architectures, including the centralized antenna architectures based on traditional compact arrays or emerging sparse arrays, the distributed antenna architectures exemplified by the cell-free massive MIMO, and the movable/fluid antennas with flexible positions and/or orientations in a given 3D space. Next, for each antenna architecture mentioned above, we present the corresponding far-field/near-field channel models and analyze the communication and sensing performance. Finally, we summarize the characteristics of different antenna architectures and look forward to new ideas for solving the difficulties in acquiring CSI caused by the continuous expansion of antenna array scale and flexible antenna designs.

cs.AR↗

arXiv2024

6D Motion Parameters Estimation in Monostatic Integrated Sensing and Communications System

In this paper, we propose a novel scheme to estimate the six dimensional (6D) motion parameters of dynamic target for monostatic integrated sensing and communications (ISAC) system. We first provide a generic ISAC framework for dynamic target sensing based on massive multiple input and multiple output (MIMO) array. Next, we derive the relationship between the sensing channel of ISAC base station (BS) and the 6D motion parameters of dynamic target. Then, we employ the array signal processing methods to estimate the horizontal angle, pitch angle, distance, and virtual velocity of dynamic target. Since the virtual velocities observed by different antennas are different, we adopt plane fitting to estimate the dynamic target's radial velocity, horizontal angular velocity, and pitch angular velocity from these virtual velocities. Simulation results demonstrate the effectiveness of the proposed 6D motion parameters estimation scheme, which also confirms a new finding that one single BS with massive MIMO array is capable of estimating the horizontal angular velocity and pitch angular velocity of dynamic target.

eess.SP↗

arXiv2024

Deep Learning-based CSI Feedback in Wi-Fi Systems

In Wi-Fi systems, channel state information (CSI) plays a crucial role in enabling access points to execute beamforming operations. However, the feedback overhead associated with CSI significantly hampers the throughput improvements. Recent advancements in deep learning (DL) have transformed the approach to CSI feedback in cellular systems. Drawing inspiration from the successes witnessed in the realm of mobile communications, this paper introduces a DL-based CSI feedback framework, named EFNet, tailored for Wi-Fi systems. The proposed framework leverages an autoencoder to achieve precise feedback with minimal overhead. The process involves the station utilizing the encoder to compress and quantize a series of matrices into codeword bit streams, which are then fed back to the access point. Subsequently, the decoder installed at the AP reconstructs beamforming matrices from these bit streams. We implement the EFNet system using standard Wi-Fi equipment operating in the 2.4 GHz band. Experimental findings in an office environment reveal a remarkable 80.77% reduction in feedback overhead compared to the 802.11ac standard, alongside a significant boost in net throughput of up to 30.72%.

eess.SP↗

arXiv2024

Efficient IoT Devices Localization Through Wi-Fi CSI Feature Fusion and Anomaly Detection

Internet of Things (IoT) device localization is fundamental to smart home functionalities, including indoor navigation and tracking of individuals. Traditional localization relies on relative methods utilizing the positions of anchors within a home environment, yet struggles with precision due to inherent inaccuracies in these anchor positions. In response, we introduce a cutting-edge smartphone-based localization system for IoT devices, leveraging the precise positioning capabilities of smartphones equipped with motion sensors. Our system employs artificial intelligence (AI) to merge channel state information from proximal trajectory points of a single smartphone, significantly enhancing line of sight (LoS) angle of arrival (AoA) estimation accuracy, particularly under severe multipath conditions. Additionally, we have developed an AI-based anomaly detection algorithm to further increase the reliability of LoSAoA estimation. This algorithm improves measurement reliability by analyzing the correlation between the accuracy of reversed feature reconstruction and the LoS-AoA estimation. Utilizing a straightforward least squares algorithm in conjunction with accurate LoS-AoA estimation and smartphone positional data, our system efficiently identifies IoT device locations. Validated through extensive simulations and experimental tests with a receiving antenna array comprising just two patch antenna elements in the horizontal direction, our methodology has been shown to attain decimeter-level localization accuracy in nearly 90% of cases, demonstrating robust performance even in challenging real-world scenarios. Additionally, our proposed anomaly detection algorithm trained on Wi-Fi data can be directly applied to ultra-wideband, also outperforming the most advanced techniques.

cs.IT↗

arXiv2024

Analog quantum simulation of parabolic partial differential equations using Jaynes-Cummings-like models

We present a simplified analog quantum simulation protocol for preparing quantum states that embed solutions of parabolic partial differential equations, including the heat, Black-Scholes and Fokker-Planck equations. The key idea is to approximate the heat equations by a system of hyperbolic heat equations that involve only first-order differential operators. This scheme requires relatively simple interaction terms in the Hamiltonian, which are the electric and magnetic dipole moment-like interaction terms that would be present in a Jaynes-Cummings-like model. For a d-dimensional problem, we show that it is much more appropriate to use a single d-level quantum system - a qudit - instead of its qubit counterpart, and d+1 qumodes. The total resource cost is efficient in d and precision error, and has potential for realisability for instance in cavity and circuit QED systems.

quant-ph↗

arXiv2024

Coding-Enhanced Cooperative Jamming for Secret Communication in Fluid Antenna Systems

This letter investigates the secret communication problem for a fluid antenna system (FAS)-assisted wiretap channel, where the legitimate transmitter transmits an information-bearing signal to the legitimate receiver, and at the same time, transmits a jamming signal to interfere with the eavesdropper (Eve). Unlike the conventional jamming scheme, which usually transmits Gaussian noise that interferes not only with Eve but also with the legitimate receiver, in this letter, we consider that encoded codewords are transmitted to jam Eve. Then, by employing appropriate coding schemes, the legitimate receiver can successfully decode the jamming signal and then cancel the interference, while Eve cannot, even if it knows the codebooks. We aim to maximize the secrecy rate through port selection and power control. Although the problem is non-convex, we show that the optimal solution can be found. Simulation results show that by using the FAS technique and the proposed jamming scheme, the secrecy rate of the system can be significantly increased.

cs.IT↗

arXiv2024

Interference Cancellation Based Neural Receiver for Superimposed Pilot in Multi-Layer Transmission

In this paper, an interference cancellation based neural receiver for superimposed pilot (SIP) in multi-layer transmission is proposed, where the data and pilot are non-orthogonally superimposed in the same time-frequency resource. Specifically, to deal with the intra-layer and inter-layer interference of SIP under multi-layer transmission, the interference cancellation with superimposed symbol aided channel estimation is leveraged in the neural receiver, accompanied by the pre-design of pilot code-division orthogonal mechanism at transmitter. In addition, to address the complexity issue for inter-vendor collaboration and the generalization problem in practical deployments, respectively, this paper also provides a fixed SIP (F-SIP) design based on constant pilot power ratio and scalable mechanisms for different modulation and coding schemes (MCSs) and transmission layers. Simulation results demonstrate the superiority of the proposed schemes on the performance of block error rate and throughput compared with existing counterparts.

eess.SP↗

arXiv2024

Sparse MIMO for ISAC: New Opportunities and Challenges

Multiple-input multiple-output (MIMO) has been a key technology of wireless communications for decades. A typical MIMO system employs antenna arrays with the inter-antenna spacing being half of the signal wavelength, which we term as compact MIMO. Looking forward towards the future sixth-generation (6G) mobile communication networks, MIMO system will achieve even finer spatial resolution to not only enhance the spectral efficiency of wireless communications, but also enable more accurate wireless sensing. To this end, by removing the restriction of half-wavelength antenna spacing, sparse MIMO has been proposed as a new architecture that is able to significantly enlarge the array aperture as compared to conventional compact MIMO with the same number of array elements. In addition, sparse MIMO leads to a new form of virtual MIMO systems for sensing with their virtual apertures considerably larger than physical apertures. As sparse MIMO is expected to be a viable technology for 6G, we provide in this article a comprehensive overview of it, especially focusing on its appealing advantages for integrated sensing and communication (ISAC) towards 6G. Specifically, assorted sparse MIMO architectures are first introduced, followed by their new benefits as well as challenges. We then discuss the main design issues of sparse MIMO, including beam pattern synthesis, signal processing, grating lobe suppression, beam codebook design, and array geometry optimization. Last, we provide numerical results to evaluate the performance of sparse MIMO for ISAC and point out promising directions for future research.

cs.IT↗

arXiv2024

Reconfigurable Intelligent Surfaces for 6G: Emerging Hardware Architectures, Applications, and Open Challenges

Reconfigurable intelligent surfaces (RISs) are rapidly gaining prominence in the realm of fifth generation (5G)-Advanced, and predominantly, sixth generation (6G) mobile networks, offering a revolutionary approach to optimizing wireless communications. This article delves into the intricate world of the RIS technology, exploring its diverse hardware architectures and the resulting versatile operating modes. These include RISs with signal reception and processing units, sensors, amplification units, transmissive capability, multiple stacked components, and dynamic metasurface antennas. Furthermore, we shed light on emerging RIS applications, such as index and reflection modulation, non-coherent modulation, next generation multiple access, integrated sensing and communications (ISAC), energy harvesting, as well as aerial and vehicular networks. These exciting applications are set to transform the way we will wirelessly connect in the upcoming era of 6G. Finally, we review recent experimental RIS setups and present various open problems of the overviewed RIS hardware architectures and their applications. From enhancing network coverage to enabling new communication paradigms, RIS-empowered connectivity is poised to play a pivotal role in shaping the future of wireless networking. This article unveils the underlying principles and potential impacts of RISs, focusing on cutting-edge developments of this physical-layer smart connectivity technology.

cs.IT↗

arXiv2024

Rethinking Waveform for 6G: Harnessing Delay-Doppler Alignment Modulation

Waveform design has served as a cornerstone for each generation of mobile communication systems. The future sixth-generation (6G) mobile communication networks are expected to employ larger-scale antenna arrays and exploit higher-frequency bands for further boosting data transmission rate and providing ubiquitous wireless sensing. This brings new opportunities and challenges for 6G waveform design. In this article, by leveraging the super spatial resolution of large antenna arrays and the multi-path spatial sparsity of highfrequency wireless channels, we introduce a new approach for waveform design based on the recently proposed delay-Doppler alignment modulation (DDAM). In particular, DDAM makes a paradigm shift of waveform design from the conventional manner of tolerating channel delay and Doppler spreads to actively manipulating them. First, we review the fundamental constraints and performance limitations of orthogonal frequency division multiplexing (OFDM) and introduce new opportunities for 6G waveform design. Next, the motivations and basic principles of DDAM are presented, followed by its various extensions to different wireless system setups. Finally, the main design considerations for DDAM are discussed and the new opportunities for future research are highlighted.

eess.SP↗

arXiv2024

Continuous Geometry-Aware Graph Diffusion via Hyperbolic Neural PDE

While Hyperbolic Graph Neural Network (HGNN) has recently emerged as a powerful tool dealing with hierarchical graph data, the limitations of scalability and efficiency hinder itself from generalizing to deep models. In this paper, by envisioning depth as a continuous-time embedding evolution, we decouple the HGNN and reframe the information propagation as a partial differential equation, letting node-wise attention undertake the role of diffusivity within the Hyperbolic Neural PDE (HPDE). By introducing theoretical principles \textit{e.g.,} field and flow, gradient, divergence, and diffusivity on a non-Euclidean manifold for HPDE integration, we discuss both implicit and explicit discretization schemes to formulate numerical HPDE solvers. Further, we propose the Hyperbolic Graph Diffusion Equation (HGDE) -- a flexible vector flow function that can be integrated to obtain expressive hyperbolic node embeddings. By analyzing potential energy decay of embeddings, we demonstrate that HGDE is capable of modeling both low- and high-order proximity with the benefit of local-global diffusivity functions. Experiments on node classification and link prediction and image-text classification tasks verify the superiority of the proposed method, which consistently outperforms various competitive models by a significant margin.

cs.LG↗

arXiv2024

Blockchain-aided wireless federated learning: Resource allocation and client scheduling

Federated learning (FL) based on the centralized design faces both challenges regarding the trust issue and a single point of failure. To alleviate these issues, blockchain-aided decentralized FL (BDFL) introduces the decentralized network architecture into the FL training process, which can effectively overcome the defects of centralized architecture. However, deploying BDFL in wireless networks usually encounters challenges such as limited bandwidth, computing power, and energy consumption. Driven by these considerations, a dynamic stochastic optimization problem is formulated to minimize the average training delay by jointly optimizing the resource allocation and client selection under the constraints of limited energy budget and client participation. We solve the long-term mixed integer non-linear programming problem by employing the tool of Lyapunov optimization and thereby propose the dynamic resource allocation and client scheduling BDFL (DRC-BDFL) algorithm. Furthermore, we analyze the learning performance of DRC-BDFL and derive an upper bound for convergence regarding the global loss function. Extensive experiments conducted on SVHN and CIFAR-10 datasets demonstrate that DRC-BDFL achieves comparable accuracy to baseline algorithms while significantly reducing the training delay by 9.24% and 12.47%, respectively.

cs.DC↗

arXiv2024

On the Downlink Average Energy Efficiency of Non-Stationary XL-MIMO

Extra large-scale multiple-input multiple-output (XL-MIMO) is a key technology for future wireless communication systems. This paper considers the effects of visibility region (VR) at the base station (BS) in a non-stationary multi-user XL-MIMO scenario, where only partial antennas can receive users' signal. In time division duplexing (TDD) mode, we first estimate the VR at the BS by detecting the energy of the received signal during uplink training phase. The probabilities of two detection errors are derived and the uplink channel on the detected VR is estimated. In downlink data transmission, to avoid cumbersome Monte-Carlo trials, we derive a deterministic approximate expression for ergodic {average energy efficiency (EE)} with the regularized zero-forcing (RZF) precoding. In frequency division duplexing (FDD) mode, the VR is estimated in uplink training and then the channel information of detected VR is acquired from the feedback channel. In downlink data transmission, the approximation of ergodic average {EE} is also derived with the RZF precoding. Invoking approximate results, we propose an alternate optimization algorithm to design the detection threshold and the pilot length in both TDD and FDD modes. The numerical results reveal the impacts of VR estimation error on ergodic average {EE} and demonstrate the effectiveness of our proposed algorithm.

cs.IT↗

arXiv2024

A numerical algorithm with linear complexity for Multi-marginal Optimal Transport with $L^1$ Cost

Numerically solving multi-marginal optimal transport (MMOT) problems is computationally prohibitive, even for moderate-scale instances involving $l\ge4$ marginals with support sizes of $N\ge1000$. The cost in MMOT is represented as a tensor with $N^l$ elements. Even accessing each element once incurs a significant computational burden. In fact, many algorithms require direct computation of tensor-vector products, leading to a computational complexity of $O(N^l)$ or beyond. In this paper, inspired by our previous work [$Comm. \ Math. \ Sci.$, 20 (2022), pp. 2053 - 2057], we observe that the costly tensor-vector products in the Sinkhorn Algorithm can be computed with a recursive process by separating summations and dynamic programming. Based on this idea, we propose a fast tensor-vector product algorithm to solve the MMOT problem with $L^1$ cost, achieving a miraculous reduction in the computational cost of the entropy regularized solution to $O(N)$. Numerical experiment results confirm such high performance of this novel method which can be several orders of magnitude faster than the original Sinkhorn algorithm.

math.NA↗

arXiv2024

Trustworthy DNN Partition for Blockchain-enabled Digital Twin in Wireless IIoT Networks

Digital twin (DT) has emerged as a promising solution to enhance manufacturing efficiency in industrial Internet of Things (IIoT) networks. To promote the efficiency and trustworthiness of DT for wireless IIoT networks, we propose a blockchain-enabled DT (B-DT) framework that employs deep neural network (DNN) partitioning technique and reputation-based consensus mechanism, wherein the DTs maintained at the gateway side execute DNN inference tasks using the data collected from their associated IIoT devices. First, we employ DNN partitioning technique to offload the top-layer DNN inference tasks to the access point (AP) side, which alleviates the computation burden at the gateway side and thereby improves the efficiency of DNN inference. Second, we propose a reputation-based consensus mechanism that integrates Proof of Work (PoW) and Proof of Stake (PoS). Specifically, the proposed consensus mechanism evaluates the off-chain reputation of each AP according to its computation resource contributions to the DNN inference tasks, and utilizes the off-chain reputation as a stake to adjust the block generation difficulty. Third, we formulate a stochastic optimization problem of communication resource (i.e., partition point) and computation resource allocation (i.e., computation frequency of APs for top-layer DNN inference and block generation) to minimize system latency under the time-varying channel state and long-term constraints of off-chain reputation, and solve the problem using Lyapunov optimization method. Experimental results show that the proposed dynamic DNN partitioning and resource allocation (DPRA) algorithm outperforms the baselines in terms of reducing the overall latency while guaranteeing the trustworthiness of the B-DT system.

cs.LG↗