arXiv subjects

Shu Sun

Publications and source records attributed to Shu Sun.

86 records · Page 5Linked to original sources

arXiv2017

A Flexible Wideband Millimeter-Wave Channel Sounder with Local Area and NLOS to LOS Transition Measurements

This paper presents a millimeter-wave (mmWave) wideband sliding correlator channel sounder with flexibility to operate at various transmission rates. The channel sounder can transmit and receive up to 1 GHz of RF null-to-null bandwidth while measuring a 2 nanosecond multipath time resolution. The system architecture takes advantage of field-programmable gate arrays (FPGAs), high-speed digital-to-analog converters (DACs), and low phase noise Rubidium (Rb) references for synchronization. Using steerable narrowbeam antennas, the system can measure up to 185 dB of path loss. The channel sounder is used to measure the directional and omnidirectional received power as a receiver transitions from line-of-sight to non-line-of-sight conditions down an urban canyon. A 25 dB drop in omnidirectional received power was observed as the receiver transitioned from line-of-sight (LOS) conditions to deeply shadowed non-LOS (NLOS) conditions. The channel sounder was also used to study signal variation and spatial consistency for a local set of receiver locations arranged in a cluster spanning a 5 m x 10 m local area, where the omnidirectional received power in LOS and NLOS environments is found to be relatively stable with standard deviations of received power of 2.2 dB and 4.3 dB, respectively. This work shows that when implementing beamforming at the transmitter at mmWave, the omnidirectional received power over a local area has little fluctuation among receiver locations separated by a few to several meters.

cs.IT↗

arXiv2016

Millimeter-Wave Human Blockage at 73 GHz with a Simple Double Knife-Edge Diffraction Model and Extension for Directional Antennas

This paper presents 73 GHz human blockage measurements for a point-to-point link with a 5 m transmitter-receiver separation distance in an indoor environment, with a human that walked at a speed of approximately 1 m/s at a perpendicular orientation to the line between the transmitter and receiver, at various distances between them. The experiment measures the shadowing effect of a moving human body when using directional antennas at the transmitter and receiver for millimeter-wave radio communications. The measurements were conducted using a 500 Megachips-per-second wideband correlator channel sounder with a 1 GHz first null-to-null RF bandwidth. Results indicate high shadowing attenuation is not just due to the human blocker but also is due to the static directional nature of the antennas used, leading to the need for phased-array antennas to switch beam directions in the presence of obstructions and blockages at millimeter-waves. A simple model for human blockage is provided based on the double knife-edge diffraction (DKED) model where humans are approximated by a rectangular screen with infinite vertical height, similar to the human blockage model given by the METIS project.

cs.IT↗

arXiv2016

Millimeter Wave Wireless Communications: New Results for Rural Connectivity

This paper shows the remarkable distances that can be achieved using millimeter wave communications, and presents a new rural macrocell (RMa) path loss model for millimeter wave frequencies, based on measurements at 73 GHz in rural Virginia. Path loss models are needed to estimate signal coverage and interference for wireless network design, yet little is known about rural propagation at millimeter waves. This work identifies problems with the RMa model used by the 3rd Generation Partnership Project (3GPP) TR 38.900 Release 14, and offers a close-in (CI) reference distance model that has improved accuracy, fewer parameters, and better stability as compared with the existing 3GPP RMa path loss model. The measurements and models presented here are the first to validate rural millimeter wave path loss models.

cs.IT↗

arXiv2016

Investigation of Prediction Accuracy, Sensitivity, and Parameter Stability of Large-Scale Propagation Path Loss Models for 5G Wireless Communications

This paper compares three candidate large-scale propagation path loss models for use over the entire microwave and millimeter-wave (mmWave) radio spectrum: the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference distance model, and the CI model with a frequency-weighted path loss exponent (CIF). Each of these models have been recently studied for use in standards bodies such as 3GPP, and for use in the design of fifth generation (5G) wireless systems in urban macrocell, urban microcell, and indoor office and shopping mall scenarios. Here we compare the accuracy and sensitivity of these models using measured data from 30 propagation measurement datasets from 2 GHz to 73 GHz over distances ranging from 4 m to 1238 m. A series of sensitivity analyses of the three models show that the physically-based two-parameter CI model and three-parameter CIF model offer computational simplicity, have very similar goodness of fit (i.e., the shadow fading standard deviation), exhibit more stable model parameter behavior across frequencies and distances, and yield smaller prediction error in sensitivity testing across distances and frequencies, when compared to the four-parameter ABG model. Results show the CI model with a 1 m close-in reference distance is suitable for outdoor environments, while the CIF model is more appropriate for indoor modeling. The CI and CIF models are easily implemented in existing 3GPP models by making a very subtle modification -- by replacing a floating non-physically based constant with a frequency-dependent constant that represents free space path loss in the first meter of propagation.

cs.IT↗

arXiv2016

Indoor 5G 3GPP-like Channel Models for Office and Shopping Mall Environments

Future mobile communications systems are likely to be very different to those of today with new service innovations driven by increasing data traffic demand, increasing processing power of smart devices and new innovative applications. To meet these service demands the telecommunications industry is converging on a common set of 5G requirements which includes network speeds as high as 10 Gbps, cell edge rate greater than 100 Mbps, and latency of less than 1 msec. To reach these 5G requirements the industry is looking at new spectrum bands in the range up to 100 GHz where there is spectrum availability for wide bandwidth channels. For the development of new 5G systems to operate in bands up to 100 GHz there is a need for accurate radio propagation models which are not addressed by existing channel models developed for bands below 6 GHz. This paper presents a preliminary overview of the 5G channel models for bands up to 100 GHz in indoor offices and shopping malls, derived from extensive measurements across a multitude of bands. These studies have found some extensibility of the existing 3GPP models to the higher frequency bands up to 100 GHz. The measurements indicate that the smaller wavelengths introduce an increased sensitivity of the propagation models to the scale of the environment and show some frequency dependence of the path loss as well as increased occurrence of blockage. Further, the penetration loss is highly dependent on the material and tends to increase with frequency. The small-scale characteristics of the channel such as delay spread and angular spread and the multipath richness is somewhat similar over the frequency range, which is encouraging for extending the existing 3GPP models to the wider frequency range. Further work will be carried out to complete these models, but this paper presents the first steps for an initial basis for the model development.

cs.IT↗

arXiv2016

5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments

For the development of new 5G systems to operate in bands up to 100 GHz, there is a need for accurate radio propagation models at these bands that currently are not addressed by existing channel models developed for bands below 6 GHz. This document presents a preliminary overview of 5G channel models for bands up to 100 GHz. These have been derived based on extensive measurement and ray tracing results across a multitude of frequencies from 6 GHz to 100 GHz, and this document describes an initial 3D channel model which includes: 1) typical deployment scenarios for urban microcells (UMi) and urban macrocells (UMa), and 2) a baseline model for incorporating path loss, shadow fading, line of sight probability, penetration and blockage models for the typical scenarios. Various processing methodologies such as clustering and antenna decoupling algorithms are also presented.

cs.IT↗

arXiv2016

Millimeter-Wave Distance-Dependent Large-Scale Propagation Measurements and Path Loss Models for Outdoor and Indoor 5G Systems

This paper presents millimeter-wave propagation measurements for urban micro-cellular and indoor office scenarios at 28 GHz and 73 GHz, and investigates the corresponding path loss using five types of path loss models, the singlefrequency floating-intercept (FI) model, single-frequency closein (CI) free space reference distance model, multi-frequency alpha-beta-gamma (ABG) model, multi-frequency CI model, and multi-frequency CI model with a frequency-weighted path loss exponent (CIF), in both line-of-sight and non-line-of-sight environments. Results show that the CI and CIF models provide good estimation and exhibit stable behavior over frequencies and distances, with a solid physical basis and less computational complexity when compared with the FI and ABG models. Furthermore, path loss in outdoor scenarios shows little dependence on frequency beyond the first meter of free space propagation, whereas path loss tends to increase with frequency in addition to the increased free space path loss in indoor environments. Therefore, the CI model is suitable for outdoor environments over multiple frequencies, while the CIF model is more appropriate for indoor modeling. This work shows that both the CI and CIF models use fewer parameters and offer more convenient closedform expressions suitable for analysis, without compromising model accuracy when compared to current 3GPP and WINNER path loss models.

cs.IT↗

arXiv2016

A Prediction Study of Path Loss Models from 2-73.5 GHz in an Urban-Macro Environment

It is becoming clear that 5G wireless systems will encompass frequencies from around 500 MHz all the way to around 100 GHz. To adequately assess the performance of 5G systems in these different bands, path loss (PL) models will need to be developed across this wide frequency range. The PL models can roughly be broken into two categories, ones that have some anchor in physics, and ones that curve-match only over the data set without any physical anchor. In this paper we use both real-world measurements from 2 to 28 GHz and ray-tracing studies from 2 to 73.5 GHz, both in an urban-macro environment, to assess the prediction performance of the two PL modeling techniques. In other words, we look at how the two different PL modeling techniques perform when the PL model is applied to a prediction set which is different in distance, frequency, or environment from a measurement set where the parameters of the respective models are determined. We show that a PL model with a physical anchor point can be a better predictor of PL performance in the prediction sets while also providing a parameterization which is more stable over a substantial number of different measurement sets.

cs.IT↗

arXiv2016

Propagation Path Loss Models for 5G Urban Micro- and Macro-Cellular Scenarios

This paper presents and compares two candidate large-scale propagation path loss models, the alpha-beta-gamma (ABG) model and the close-in (CI) free space reference distance model, for the design of fifth generation (5G) wireless communication systems in urban micro- and macro-cellular scenarios. Comparisons are made using the data obtained from 20 propagation measurement campaigns or ray-tracing studies from 2 GHz to 73.5 GHz over distances ranging from 5 m to 1429 m. The results show that the one-parameter CI model has a very similar goodness of fit (i.e., the shadow fading standard deviation) in both line-of-sight and non-line-of-sight environments, while offering substantial simplicity and more stable behavior across frequencies and distances, as compared to the three-parameter ABG model. Additionally, the CI model needs only one very subtle and simple modification to the existing 3GPP floating-intercept path loss model (replacing a constant with a close-in free space reference value) in order to provide greater simulation accuracy, more simplicity, better repeatability across experiments, and higher stability across a vast range of frequencies.

cs.IT↗

arXiv2016

28 GHz Millimeter-Wave Ultrawideband Small-Scale Fading Models in Wireless Channels

This paper presents small-scale fading measurements for 28 GHz outdoor millimeter-wave ultrawideband channels using directional horn antennas at the transmitter and receiver. Power delay profiles were measured at half-wavelength spatial increments over a local area (33 wavelengths) on a linear track in two orthogonal receiver directions in a typical base-to-mobile scenario with fixed transmitter and receiver antenna beam pointing directions. The voltage path amplitudes are shown to follow a Rician distribution, with K-factor ranging from 9 - 15 dB and 5 - 8 dB in line of sight (LOS) and non-line of sight (NLOS) for a vertical-to-vertical co-polarized antenna scenario, respectively, and from 3 - 7 dB in both LOS and NLOS vertical-to-horizontal cross-polarized antenna scenario. The average spatial autocorrelation functions of individual multipath components reveal that signal amplitudes reach a correlation of 0 after 2 and 5 wavelengths in LOS and NLOS co-polarized V-V antenna scenarios. The models provided are useful for recreating path gain statistics of millimeter-wave wideband channel impulse responses over local areas, for the study of multi-element antenna simulations and channel estimation algorithms.

cs.IT↗

arXiv2016

MIMO Channel Modeling and Capacity Analysis for 5G Millimeter-Wave Wireless Systems

This paper presents a 3-D statistical channel model of the impulse response with small-scale spatially correlated random coefficients for multi-element transmitter and receiver antenna arrays, derived using the physically-based time cluster - spatial lobe (TCSL) clustering scheme. The small-scale properties of multipath amplitudes are modeled based on 28 GHz outdoor millimeter-wave small-scale local area channel measurements. The wideband channel capacity is evaluated by considering measurement-based Rician-distributed voltage amplitudes, and the spatial autocorrelation of multipath amplitudes for each pair of transmitter and receiver antenna elements. Results indicate that Rician channels may exhibit equal or possibly greater capacity compared to Rayleigh channels, depending on the number of antennas.

cs.IT↗

arXiv2015

Synthesizing Omnidirectional Antenna Patterns, Received Power and Path Loss from Directional Antennas for 5G Millimeter-Wave Communications

Omnidirectional path loss models are vital for radiosystem design in wireless communication systems, as they allow engineers to perform network simulations for systems with arbitrary antenna patterns. At millimeter-wave frequencies, channel measurements are frequently conducted using steerable highgain directional antennas at both the transmitter and receiver to make up for the significant increase in free space path loss at these frequencies compared to traditional cellular systems that operate at lower frequencies. The omnidirectional antenna pattern, and resulting omnidirectional received power must therefore be synthesized from many unique pointing angles, where the transmit and receive antennas are rotated over many different azimuth and elevation planes. In this paper, the equivalent omnidirectional antenna pattern and omnidirectional received power are synthesized by summing the received powers from all measured unique pointing angles obtained at antenna halfpower beamwidth step increments in the azimuth and elevation planes, and this method is validated by demonstrating that the synthesized omnidirectional received power and path loss are independent of antenna beamwidth, through theoretical analyses and millimeter-wave propagation measurements using antennas with different beamwidths. The method in this paper is shown to provide accurate results while enhancing the measurement range substantially through the use of directional antennas.

cs.IT↗

arXiv2015

Path Loss, Shadow Fading, and Line-Of-Sight Probability Models for 5G Urban Macro-Cellular Scenarios

This paper presents key parameters including the line-of-sight (LOS) probability, large-scale path loss, and shadow fading models for the design of future fifth generation (5G) wireless communication systems in urban macro-cellular (UMa) scenarios, using the data obtained from propagation measurements at 38 GHz in Austin, US, and at 2, 10, 18, and 28 GHz in Aalborg, Denmark. A comparison of different LOS probability models is performed for the Aalborg environment. Alpha-betagamma and close-in reference distance path loss models are studied in depth to show their value in channel modeling. Additionally, both single-slope and dual-slope omnidirectional path loss models are investigated to analyze and contrast their root-mean-square (RMS) errors on measured path loss values. While the results show that the dual-slope large-scale path loss model can slightly reduce RMS errors compared to its singleslope counterpart in non-line-of-sight (NLOS) conditions, the improvement is not significant enough to warrant adopting the dual-slope path loss model. Furthermore, the shadow fading magnitude versus distance is explored, showing a slight increasing trend in LOS and a decreasing trend in NLOS based on the Aalborg data, but more measurements are necessary to gain a better knowledge of the UMa channels at centimeter- and millimeter-wave frequency bands.

cs.IT↗

arXiv2014

Millimeter Wave Channel Modeling and Cellular Capacity Evaluation

With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via beamforming and spatial multiplexing. This paper uses recent real-world measurements at 28 and 73 GHz in New York City to derive detailed spatial statistical models of the channels and uses these models to provide a realistic assessment of mmW micro- and picocellular networks in a dense urban deployment. Statistical models are derived for key channel parameters including the path loss, number of spatial clusters, angular dispersion and outage. It is found that, even in highly non-line-of-sight environments, strong signals can be detected 100 m to 200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing. Moreover, a system simulation based on the models predicts that mmW systems can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with no increase in cell density from current urban deployments.

cs.NI↗