arXiv subjects

Shuihan Zhang

Publications and source records attributed to Shuihan Zhang.

6 recordsLinked to original sources

arXiv2024

Design and Implementation of TAO DAQ System

Purpose: The Taishan Antineutrino Observatory (TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO), also known as JUNO-TAO. Located close to one of the reactors of the Taishan Nuclear Power Plant, TAO will measure the antineutrino energy spectrum precisely as a reference spectrum for JUNO. The data acquisition (DAQ) system is designed to acquire data from the TAO readout electronics and process it with software trigger and data compression algorithms. The data storage bandwidth is limited by the onsite network to be less than 100 Mb/s. Methods: The system is designed based on a distributed architecture, with fully decoupled modules to facilitate customized design and implementation. It is divided into two main components: the data flow system and the online software. The online software serves as the foundation, providing the electronics configuration, the process management, the run control, and the information sharing. The data flow system facilitates continuous data acquisition from various electronic boards or trigger systems, assembles and processes raw data, and ultimately stores it on the disk. Results: The core functionality of the system has been designed and developed. The usability of the data flow system interface and the software trigger results have been verified during the pre-installation testing phase. Conclusion: The DAQ system has been deployed for the TAO experiment. It has also successfully been applied to the integration test of the detector and electronics prototypes.

physics.ins-det↗

arXiv2024

A Study of the Latest Updates of the Readout System for the Hybird-Pixel Detector at HEPS

The High Energy Photon Source (HEPS) represents a fourth-generation light source. This facility has made unprecedented advancements in accelerator technology, necessitating the development of new detectors to satisfy physical requirements such as single-photon resolution, large dynamic range, and high frame rates. Since 2016, the Institute of High Energy Physics has introduced the first user-experimental hybrid pixel detector, progressing to the fourth-generation million-pixel detector designed for challenging conditions, with the dual-threshold single-photon detector HEPS-Beijing PIXel (HEPS-BPIX) set as the next-generation target. HEPS-BPIX will employ the entirely new Application-Specific Integrated Circuit (ASIC) BP40 for pixel information readout. Data flow will be managed and controlled through readout electronics based on a two-tier Field-Programmable Gate Array (FPGA) system: the Front-End Electronics (FEE) and the Input-Output Board (IOB) handle the fan-out for 12 ASICs, and the u4FCP is tasked with processing serial data on high-speed links, transferring pixel-level data to the back-end RTM and uTCA chassis, or independently outputting through a network port, enabling remote control of the entire detector. The new HEPS-BPIX firmware has undergone a comprehensive redesign and update to meet the electronic characteristics of the new chip and to improve the overall performance of the detector. We provide an overview of the core subunits of HEPS-BPIX, emphasizing the readout system, evaluating the new hardware and firmware, and highlighting some of its innovative features and characteristics.

physics.ins-det↗

arXiv2023

Implementation and performances of the IPbus protocol for the JUNO Large-PMT readout electronics

The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the experiment is an unprecedented 3% energy resolution, guaranteed by its large active mass (20 kton) and the use of more than 20,000 20-inch photo-multiplier tubes (PMTs) acquired by high-speed, high-resolution sampling electronics located very close to the PMTs. As the Front-End and Read-Out electronics is expected to continuously run underwater for 30 years, a reliable readout acquisition system capable of handling the timestamped data stream coming from the Large-PMTs and permitting to simultaneously monitor and operate remotely the inaccessible electronics had to be developed. In this contribution, the firmware and hardware implementation of the IPbus based readout protocol will be presented, together with the performances measured on final modules during the mass production of the electronics.

physics.ins-det↗

arXiv2023

Mass testing of the JUNO experiment 20-inch PMTs readout electronics

The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test protocol for the 20-inch PMT underwater readout electronics, performed in parallel to the mass production line. In a time period of about ten months, a total number of 6950 electronic boards were tested with an acceptance yield of 99.1%.

physics.ins-det↗

arXiv2022

Validation and integration tests of the JUNO 20-inch PMTs readout electronics

The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet specific tight requirements, and a thorough characterization is required. The present paper describes the tests performed on the readout modules to measure their performances.

physics.ins-det↗

arXiv2022

Calibration Strategy of the JUNO-TAO Experiment

The Taishan Antineutrino Observatory (JUNO-TAO, or TAO) is a satellite detector for the Jiangmen Underground Neutrino Observatory (JUNO). Located near the Taishan reactor, TAO independently measures the reactor's antineutrino energy spectrum with unprecedented energy resolution. To achieve this goal, energy response must be well calibrated. Using the Automated Calibration Unit (ACU) and the Cable Loop System (CLS) of TAO, multiple radioactive sources are deployed to various positions in the detector to perform a precise calibration of energy response. The non-linear energy response can be controlled within 0.6% with different energy points of these radioactive sources. It can be further improved by using $^{12}\rm B$ decay signals produced by cosmic muons. Through the energy non-uniformity calibration, residual non-uniformity is less than 0.2%. The energy resolution degradation and energy bias caused by the residual non-uniformity can be controlled within 0.05% and 0.3%, respectively. In addition, the stability of other detector parameters, such as the gain of each silicon photo-multiplier, can be monitored with a special ultraviolet LED calibration system.

physics.ins-det↗