arXiv subjects

Silvana Botti

Publications and source records attributed to Silvana Botti.

71 records · Page 4Linked to original sources

arXiv2013

Conducting boron sheets formed by the reconstruction of the α-boron (111) surface

Systematic ab initio structure prediction was applied for the first time to predict low energy surface reconstructions by employing the minima hopping method on the α-boron (111) surface. Novel reconstruction geometries were identified and carefully characterized in terms of structural and electronic properties. Our calculations predict the formation of a planar, mono-layer sheet at the surface, which is responsible for conductive surface states. Furthermore, the isolated boron sheet is shown to be the ground state 2D-structure in vacuum at a hole density of η=1/5 and is therefore a potential candidate as a precursor for boron nano-structures.

cond-mat.mtrl-sci↗

arXiv2013

Strong renormalization of the electronic band gap due to lattice polarization in the GW formalism

The self-consistent GW band gaps are known to be significantly overestimated. We show that this overestimation is, to a large extent, due to the neglect of the contribution of the lattice polarization to the screening of the electron-electron interaction. To solve this problem, we derive within the GW formalism a generalized plasmon-pole model that accounts for lattice polarization. The resulting GW self-energy is used to calculate the band structures of a set of binary semiconductors and insulators. The lattice contribution always decreases the band gap. The shrinkage increases with the size of the longitudinal-transverse optical splitting and it can represent more than 15% of the band gap in highly polar compounds, reducing the band-gap percentage error by a factor of three.

cond-mat.mtrl-sci↗

arXiv2013

Low-Energy Polymeric Phases of Alanates

Low-energy structures of alanates are currently known to be described by patterns of isolated, nearly ideal tetrahedral [AlH$_4$] anions and metal cations. We discover that the novel polymeric motif recently proposed for LiAlH$_4$ plays a dominant role in a series of alanates, including LiAlH$_4$, NaAlH$_4$, KAlH$_4$, Mg(AlH$_4$)$_2$, Ca(AlH$_4$)$_2$ and Sr(AlH$_4$)$_2$. In particular, most of the low-energy structures discovered for the whole series are characterized by networks of corner-sharing [AlH$_6$] octahedra, forming wires and/or planes throughout the materials. Finally, for Mg(AlH$_4$)$_2$ and Sr(AlH$_4$)$_2$, we identify two polymeric phases to be lowest in energy at low temperatures.

cond-mat.mtrl-sci↗

arXiv2012

Speeding up the solution of the Bethe-Salpeter equation by a double-grid method and Wannier interpolation

The Bethe-Salpeter equation is a widely used approach to describe optical excitations in bulk semiconductors. It leads to spectra that are in very good agreement with experiment, but the price to pay for such accuracy is a very high computational burden. One of the main bottlenecks is the large number of k-points required to obtain converged spectra. In order to circumvent this problem we propose a strategy to solve the Bethe-Salpeter equation based on a double-grid technique coupled to a Wannier interpolation of the Kohn-Sham band structure. This strategy is then benchmarked for a particularly difficult case, the calculation of the absorption spectrum of GaAs, and for the well studied case of Si. The considerable gains observed in these cases fully validate our approach, and open the way for the application of the Bethe-Salpeter equation to large and complex systems.

cond-mat.mtrl-sci↗

arXiv2012

Low-energy silicon allotropes with strong absorption in the visible for photovoltaic applications

We present state-of-the-art first-principle calculations of the electronic and optical properties of silicon allotropes with interesting characteristics for applications in thin-film solar cells. These new phases consist of distorted sp$^3$ silicon networks and have a lower formation energy than other experimentally produced silicon phases. Some of these structures turned out to have quasi-direct and dipole-allowed band gaps in the range 0.8--1.5\,eV, and to display absorption coefficients comparable with those of chalcopyrites used in thin-film record solar cells.

cond-mat.mtrl-sci↗

arXiv2012

Prediction of a novel monoclinic carbon allotrope

A novel allotrope of carbon with $P2/m$ symmetry was identified during an \emph{ab-initio} minima-hopping structural search which we call $M10$-carbon. This structure is predicted to be more stable than graphite at pressures above 14.4 GPa and consists purely of $sp^3$ bonds. It has a high bulk modulus and is almost as hard as diamond. A comparison of the simulated X-ray diffraction pattern shows a good agreement with experimental results from cold compressed graphite.

cond-mat.mtrl-sci↗

arXiv2011

The crystal structure of cold compressed graphite

Through a systematic structural search we found an allotrope of carbon with Cmmm symmetry which we predict to be more stable than graphite for pressures above 10 GPa. This material, which we refer to as Z-carbon, is formed by pure sp3 bonds and is the only carbon allotrope which provides an excellent match to unexplained features in experimental X-ray diffraction and Raman spectra of graphite under pressure. The transition from graphite to Z-carbon can occur through simple sliding and buckling of graphene sheets. Our calculations predict that Z-carbon is a transparent wide band gap semiconductor with a hardness comparable to diamond.

cond-mat.mtrl-sci↗

arXiv2011

Band structures of Cu2nSnS4 and Cu2nSnSe4 from many-body methods

We calculate the band structures of kesterite and stannite Cu2ZnSnS4 and Cu2ZnSnSe4, using a state-of-the-art self-consistent GW approach. Our accurate quasiparticle states allow to discuss: the dependence of the gap on the anion displacement; the key-role of the non-locality of the exchange-correlation potential to obtain good structural parameters; the reliability of less expensive hybrid functional and GGA+U approaches. In particular, we show that even if the band gap is correctly reproduced by hybrid functionals, the band-edge corrections are in disagreement with self-consistent GW results, which has decisive implications for the positioning of the defect levels in the band gap.

cond-mat.mtrl-sci↗

arXiv2010

Enhancing the superconducting transition temperature of BaSi2 by structural tuning

We present a joint experimental and theoretical study of the superconducting phase of the layered binary silicide BaSi2. Compared with the layered AlB2 structure of graphite or diboride-like superconductors, in the hexagonal structure of binary silicides the sp3 arrangement of silicon atoms leads to corrugated sheets. Through a high-pressure synthesis procedure we are able to modify the buckling of these sheets, obtaining the enhancement of the superconducting transition temperature from 4 K to 8.7 K when the silicon planes flatten out. By performing ab-initio calculations based on density functional theory we explain how the electronic and phononic properties of the system are strongly affected by changes in the buckling. This mechanism is likely present in other intercalated layered superconductors, opening the way to the tuning of superconductivity through the control of internal structural parameters.

cond-mat.supr-con↗

arXiv2010

Density-based mixing parameter for hybrid functionals

A very popular ab-initio scheme to calculate electronic properties in solids is the use of hybrid functionals in density functional theory (DFT) that mixes a portion of Fock exchange with DFT functionals. In spite of their success, a major problem still remains, related to the use of one single mixing parameter for all materials. Guided by physical arguments that connect the mixing parameter to the dielectric properties of the solid, and ultimately to its band gap, we propose a method to calculate this parameter from the electronic density alone. This method is able to cut significantly the error of traditional hybrid functionals for large and small gap materials, while retaining a good description of structural properties. Moreover, its implementation is simple and leads to a negligible increase of the computational time.

cond-mat.mtrl-sci↗

arXiv2010

Effects of polarization on the band-structure of delafossite transparent conductive oxides

We use hybrid functionals and restricted self-consistent GW, state-of-the-art theoretical approaches for quasiparticle band structures, to study the electronic states of delafossite Cu(Al,In)O$_2$, the first p-type and bipolar transparent conductive oxides. We show that self-consistent GW gives remarkably wider band gaps than all the other approaches used so far. Accounting for polaronic effects in the GW scheme we recover a very nice agreement with experiments. Furthermore, the modifications with respect to the Kohn-Sham bands are strongly k-dependent, which makes questionable the common practice of using a scissor operator. Finally, our results support the view that the low energy structures found in optical experiments, and initially attributed to an indirect transition, are due to intrinsic defects in the samples.

cond-mat.mtrl-sci↗

arXiv2009

Alloying effects on the optical properties of Ge$_{1-x}$Si$_x$ nanocrystals from TDDFT and comparison with effective-medium theory

We present the optical spectra of Ge$_{1-x}$Si$_x$ alloy nanocrystals calculated with time-dependent density-functional theory in the adiabatic local-density ap proximation (TDLDA). The spectra change smoothly as a function of the compositio n $x$. On the Ge side of the composition range, the lowest excitations at the ab sorption edge are almost pure Kohn-Sham independent-particle HOMO-LUMO transitio ns, while for higher Si contents strong mixing of transitions is found. Within T DLDA the first peak is slightly higher in energy than in earlier independent-par ticle calculations. However, the absorption onset and in particular its composit ion dependence is similar to independent-particle results. Moreover, classical depolarization effects are responsible for a very strong suppression of the abs orption intensity. We show that they can be taken into account in a simpler way using Maxwell-Garnett classical effective-medium theory. Emission spectra are in vestigated by calculating the absorption of excited nanocrystals at their relaxe d geometry. The structural contribution to the Stokes shift is about 0.5 eV. Th e decomposition of the emission spectra in terms of independent-particle transit ions is similar to what is found for absorption. For the emission, very weak tra nsitions are found in Ge-rich clusters well below the strong absorption onset.

cond-mat.mtrl-sci↗

arXiv2008

Cluster-surface and cluster-cluster interactions: Ab initio calculations and modeling of van der Waals forces

We present fully ab-initio calculations of van der Waals coefficients for two different situations: i) the interaction between hydrogenated silicon clusters; and ii) the interactions between these nanostructures and a non metallic surface (a silicon or a silicon carbide surface). The methods used are very efficient, and allow the calculation of systems containing hundreds of atoms. The results obtained are further analyzed and understood with the help of simple models. These models can be of interest for molecular dynamics simulations of silicon nanostructures on surfaces, where they can give a very fast yet sufficiently accurate determination of the van der Waals interaction at large separations.

cond-mat.mtrl-sci↗

arXiv2007

A time-dependent density functional theory scheme for efficient calculations of dynamic (hyper)polarizabilities

We present an efficient perturbative method to obtain both static and dynamic polarizabilities and hyperpolarizabilities of complex electronic systems. This approach is based on the solution of a frequency dependent Sternheimer equation, within the formalism of time-dependent density functional theory, and allows the calculation of the response both in resonance and out of resonance. Furthermore, the excellent scaling with the number of atoms opens the way to the investigation of response properties of very large molecular systems. To demonstrate the capabilities of this method, we implemented it in a real-space (basis-set free) code, and applied it to benchmark molecules, namely CO, H2O, and paranitroaniline (PNA). Our results are in agreement with experimental and previous theoretical studies, and fully validate our approach.

cond-mat.mtrl-sci↗

arXiv2007

Efficient calculation of van der Waals dispersion coefficients with time-dependent density functional theory in real time: application to polycyclic aromatic hydrocarbons

The van der Waals dispersion coefficients of a set of polycyclic aromatic hydrocarbons, ranging in size from the single-cycle benzene to circumovalene (C66H20), are calculated with a real-time propagation approach to time-dependent density functional theory (TDDFT). In the non-retarded regime, the Casimir-Polder integral is employed to obtain C6, once the dynamic polarizabilities have been computed at imaginary frequencies with TDDFT. On the other hand, the numerical coefficient that characterizes the fully retarded regime is obtained from the static polarizabilities. This ab initio strategy has favorable scaling with the size of the system - as demonstrated by the size of the reported molecules - and can be easily extended to obtain higher order van der Waals coefficients.

cond-mat.mtrl-sci↗

arXiv2007

Identification of fullerene-like CdSe nanoparticles from optical spectroscopy calculations

Semiconducting nanoparticles are the building blocks of optical nanodevices as their electronic states, and therefore light absorption and emission, can be controlled by modifying their size and shape. CdSe is perhaps the most studied of these nanoparticles, due to the efficiency of its synthesis, the high quality of the resulting samples, and the fact that the optical gap is in the visible range. In this article, we study light absorption of CdSe nanostructures with sizes up to 1.5 nm within density functional theory. We study both bulk fragments with wurtzite symmetry and novel fullerene-like core-cage structures. The comparison with recent experimental optical spectra allows us to confirm the synthesis of these fullerene-like CdSe clusters.

cond-mat.mtrl-sci↗

arXiv2005

The planar-to-tubular structural transition in boron clusters from optical absorption

The optical response of the lowest energy isomers of the B_20 family is calculated using time-dependent density functional theory within a real-space, real-time scheme. Significant differences are found among the absorption spectra of the clusters studied. We show that these differences can be easily related to changes in the overall geometry. Optical spectroscopy is thus an efficient tool to characterize the planar to tubular structural transition, known to be present in these boron based systems.

physics.atm-clus↗