arXiv subjects

Simone Borri

Publications and source records attributed to Simone Borri.

15 recordsLinked to original sources

arXiv2026

Quantum cascade laser roadmap

Quantum cascade lasers (QCLs) are unipolar semiconductor lasers first demonstrated in 1994. Since then, they have played a central role in advancing mid-infrared and terahertz photonics, becoming among the most reliable light sources in these regions of the electromagnetic spectrum. Their importance is further reinforced by their ability to generate self-starting optical frequency combs, whose investigation is motivated both by fundamental physics and by a wide range of applications, including molecular spectroscopy and free-space optical communications. This Roadmap provides a unified overview of current advances and emerging directions in QCL research. The chapters are organized into three main sections: device design and technology; frequency combs and pulse formation; and applications of QCLs. Each chapter reviews the relevant background, summarizes the current state of the art, and identifies key challenges and future directions within its specific research area.

physics.optics↗

arXiv2026

Sub-doppler trace-gas photoacoustic spectroscopy

Molecules are emerging as new benchmark for metrology and fundamental physics research, driving the demand for spectroscopic techniques combining high sensitivity and resolution. Photoacoustic spectroscopy has proven to combine high sensitivity with appealing features like compactness, wavelength-independent and background-free detection. To date, photoacoustic sensing has mostly been focused on high-pressure applied trace-gas analysis, while accessing the low-pressure regime has been considered not compatible with efficient acoustic wave propagation. However, sensing gas samples at low pressure is the key to get access to high-resolution spectroscopy. Here, we demonstrate that sub-Doppler saturation spectroscopy can be performed on low-pressure trace gases in a cavity-enhanced photoacoustic sensor with mW-level mid-infrared radiation. Moreover, we show that the same setup can be operated at higher pressure, enabling trace-gas detection with 5 parts-per-billion sensitivity with a laser power as low as 35 microwatts. This allows to extend the unique advantages of the photoacoustic technique to metrology and fundamental physics and provides the mid-infrared with a cost-effective, flexible tool combining high sensitivity and resolution.

physics.optics↗

arXiv2025

Electron-to-photon noise transfer in mid-infrared semiconductor lasers

Noise characteristics of state-of-the art light sources are crucial parameters in understanding their limitations towards quantum applications. This work describes a method to study the electrical noise transfer of current driver sources to the intensity noise of mid-infrared emission by commercial quantum and interband cascade lasers (QCLs and ICLs, respectively). A current driver with sub-shot electrical noise in a specific frequency range (up to 10 dB below the shot noise level) was developed for this purpose. This enables testing the performance of mid-infrared lasers when driven via such a quiet pump source. By using this novel current driver, we identify the fundamental noise of a QCL and an ICL, that is the laser intensity noise resulting solely from the internal dynamics of the laser under test. The proposed methodology allows us to retrieve the noise transfer function from current to light, showing that the main limitations in observing the quantum properties of the emitted photons come from laser excess noise and poor matching between laser and detection system in terms of bandwidth and optical power. From the analysis of the measured parameters, we highlight current technological limitations and suggest which key features should be optimized in mid-infrared systems for matching the performance required by quantum applications.

physics.optics↗

arXiv2025

Frequency and intensity noise of a grating-tuned external-cavity quantum cascade laser

Quantum cascade lasers (QCLs) are semiconductor-heterostructure devices known for their emission in the mid-infrared and THz spectral regions. Due to their operating regime, their intrinsic linewidth is significantly narrower compared to bipolar semiconductor lasers. Here, we demonstrate that by implementing an external-cavity (EC) configuration based on a commercial diffraction grating, we have successfully induced a Fabry-Perot QCL to emit on a single mode with a broadly-tunable wavelength in the range 4.29-4.44 {\mu}m. This very simple setup enhances the laser's performance in terms of threshold current and emitted power. We further prove that the EC configuration positively impacts the laser's noise properties. In particular, the intrinsic linewidth is substantially reduced, the full linewidth is also decreased (depending on the integration timescale), and the relative intensity noise is slightly reduced. These characteristics, which hold within the whole tuning range, make the EC-QCL a good candidate for spectroscopy applications where broad tunability and narrow linewidth are highly demanded.

physics.optics↗

arXiv2025

Self-mixing-based photoacoustic sensing

Versatile, ultracompact, easy-to-handle, high-sensitivity sensors are compelling tools for in situ pivotal applications, such as medical diagnostics, security and safety assessments, and environmental control. In this work, we combine photoacoustic spectroscopy and feedback interferometry, proposing a novel trace-gas sensor equipped with a self-mixing readout. This scheme demonstrates a readout sensitivity comparable to that of bulkier state-of-the-art balanced Michelson-interferometric schemes, achieving the same spectroscopic performance in terms of signal-to-noise ratio (SNR) and minimum detection limit (MDL). At the same time, the self-mixing readout benefits from a reduced size and a lower baseline, paving the way for future system downsizing and integration while offering a higher detectability for lower gas concentrations. Moreover, the intrinsic wavelength independence of both self-mixing and photoacoustic techniques allows the applicability and tailorability of the sensor to any desired spectral range.

physics.app-ph↗

arXiv2025

Bridging mid and near infrared by combining optomechanics and self mixing

This work describes a self-mixing-assisted optomechanical platform for transferring information between near- and mid-infrared radiation. In particular, the self-mixing signal of a mid-infrared quantum cascade laser is used to detect the oscillation of a membrane driven by light-induced forces exerted by a near-infrared excitation beam, which is amplitude-modulated at the membrane resonance frequency. This technique benefits from spectral broadness and, therefore, can link different spectral regions from both the excitation and probe sides. This versatility can pave the way for future applications of this self-mixing-assisted optomechanical platform in communication and advanced sensing systems.

physics.optics↗

arXiv2025

Free-space time-bin encoded quantum key distribution from near- to mid-infrared wavelengths

Quantum technologies play a central role in establishing new ways of quantum-secured communication. We investigate Free-Space Quantum Communication and explore the advantage of implementing Quantum Key Distribution (QKD) with weak coherent states produced by a light source in the Mid-Infrared (>3$\mu$m). We simulate time-bin encoded quantum key distribution and demonstrate that a free-space QKD link operating in the Mid-infrared outperforms configurations based on conventional near-infrared wavelengths under various weather scenarios, with a particular significance in adverse meteorological conditions.

quant-ph↗

arXiv2024

Near-single-photon atto-watt detection at mid-infrared wavelengths by a room-temperature balanced heterodyne set-up

Single photon detection is the underpinning technology for quantum communication and quantum sensing applications. At visible and near-infrared wavelengths, single-photon-detectors (SPDs) underwent a significant development in the past two decades, with the commercialization of SPADs and superconducting detectors. At longer wavelengths, in the mid-infrared range (4-11$\mu$um), given the reduced scattering and favourable transparent atmospheric windows, there is an interest in developing quantum earth-satellites-links and quantum imaging for noisy environments or large-distance telescopes. Still, SPD-level mid-infrared devices have been rarely reported in the state-of-the-art (superconductors, single-electron-transistors or avalanche-photodiodes) and, crucially, all operating at cryogenic temperatures. Here, we demonstrate a room-temperature detection system operating at 4.6$\mu$m-wavelength with a sensitivity-level of atto-watt optical power, corresponding to few tens of mid-infrared photons. This result was obtained by exploiting a pair of commercially available photodetectors within two balanced-heterodyne-detection setups: one involving a quantum-cascade-laser (QCL) and an acousto-optic-modulator (AOM) and the other one including two QCLs with mutual coherence ensured by a phase-lock-loop (PLL). Our work not only validates a viable method to detect ultra-low-intensity signals, but is also potentially scalable to the entire wavelength range already accessible by mature QCL technology, unfolding - for the first time - quantum applications at mid- and long-wave-infrared-radiation.

quant-ph↗

arXiv2024

Shot-noise-limited emission from interband and quantum cascade lasers

The intensity noise of a laser source represents one of the key factors limiting the ultimate sensitivity in laser-based systems for sensing and telecommunication. For advanced applications based on interferometry, the availability of a shot-noise-limited local oscillator is even more important for the effective feasibility of high-precision measurements. This is particularly crucial in quantum optics applications based on homodyne detection schemes to measure non-classical light states, such as squeezed states. This work deeply investigates and analyzes the intensity noise features of the most widely used mid-infrared semiconductor heterostructured lasers: quantum cascade and interband cascade lasers. For this purpose, a comprehensive comparison of three different continuous-wave lasers operating at room temperature around 4.5 {\mu}m wavelength is presented. First, a thorough electro-optical characterization is given, highlighting the differences and the shared common characteristics of the tested devices. Then, a detailed intensity noise analysis is reported, identifying their different noise operations with a particular reference to shot-noise-limited operations. Finally, some perspectives towards advanced applications are discussed.

physics.optics↗

arXiv2023

Mid-Infrared Ring Interband Cascade Laser: Operation at the Standard Quantum Limit

Many precision applications in the mid-infrared spectral range have strong constraints based on quantum effects that are expressed in particular noise characteristics. They limit, e.g., sensitivity and resolution of mid-infrared imaging and spectroscopic systems as well as the bit-error rate in optical free-space communication. Interband cascade lasers (ICLs) are a class of mid-infrared laser exploiting interband transitions in type-II band alignment geometry. They are currently gaining significant importance for mid-infrared applications from <3 {\mu}m to >6 {\mu}m wavelength, enabled by novel types of high-performance ICLs such as ring-cavity devices. Their noise-behavior is an important feature that still needs to be thoroughly analyzed, including its potential reduction with respect to the shot noise limit. In this work, we provide a comprehensive characterization of {\lambda} = 3.8 {\mu}m-emitting, continuous-wave ring-ICLs operating at room temperature. It is based on an in-depth study of their main physical intensity noise features, such as their bias-dependent intensity noise power spectral density (INPSD) and relative intensity noise (RIN). We obtain shot-noise-limited statistics for Fourier frequencies above 100 kHz. This is an important result for precision applications, e.g. interferometry or advanced spectroscopy, which benefit from exploiting the advantage of using such a shot-noise limited source, enhancing the setup sensitivity. Moreover, it is an important feature for novel quantum optics schemes including testing specific light states below the shot noise level, such as squeezed states.

physics.optics↗

arXiv2022

Characterization of noise regimes in Mid-IR free-space optical communication based on quantum cascade lasers

The recent development of Quantum Cascade Lasers (QCLs) represents one of the biggest opportunities for the deployment of a new class of Free Space Optical (FSO) communication systems working in the mid-infrared (Mid-IR) wavelength range. As compared to more common FSO systems exploiting the telecom range, the larger wavelength employed in Mid-IR systems delivers exceptional benefits in case of adverse atmospheric conditions, as the reduced scattering rate strongly suppresses detrimental effects on the FSO link length given by the presence of rain, dust, fog and haze. In this work, we use a novel FSO testbed operating at \SI{4.7}{\micro m}, to provide a detailed experimental analysis of noise regimes that could occur in realistic FSO Mid-IR systems based on QCLs. Our analysis reveals the existence of two distinct noise regions, corresponding to different realistic channel attenuation conditions, which are precisely controlled in our setup. To relate our results with real outdoor configurations, we combine experimental data with predictions of an atmospheric channel loss model, finding that error-free communication could be attained for effective distances up to 8~km in low visibility conditions of 1 km. Our analysis of noise regimes may have a key relevance for the development of novel, long-range FSO communication systems based on Mid-IR QCL sources

eess.SP↗

arXiv2022

Intensity correlations in quantum cascade laser harmonic frequency combs

A novel study on harmonic frequency combs emitted by Quantum Cascade Lasers (QCLs) is here presented, demonstrating the presence of intensity correlations between twin modes characterising the emission spectra. These originate from a Four-Wave Mixing (FWM) process driven by the active medium's third-order non-linearity. The study of such correlations is essential for the engineering of a new generation of semiconductor devices with the potential of becoming integrated emitters of light with quantum properties, such as squeezing and entanglement. Starting from experimental results, the limits of state-of-the-art technology are discussed as well as the possible methodologies that could lead to the detection of non-classical phenomena, or alternatively improve the design of QCLs, in the compelling perspective of generating quantum correlations in mid-infrared light.

physics.optics↗

arXiv2022

Doubly resonant photoacoustic spectroscopy: ultra-high sensitivity meets ultra-wide dynamic range

Photoacoustic spectroscopy (PAS) based gas sensors with high sensitivity, wide dynamic range, low cost, and small footprint are desirable across a broad range of applications in energy, environment, safety, and public health. However, most works have focused on either acoustic resonator to enhance acoustic wave or optical resonator to enhance optical wave. Herein, we develop a gas sensor based on doubly resonant PAS in which the acoustic and optical waves are simultaneously enhanced using combined optical and acoustic resonators in a centimeter-long configuration. Not only the lower detection limit is enhanced by the double standing waves, but also the upper detection limit is expanded due to the short resonators. As an example, we developed a sensor by detecting acetylene (C2H2), achieving a noise equivalent absorption of 5.7*10-13 cm-1 and a dynamic range of eight orders. Compared to the state-of-the-art PAS gas sensors, the developed sensor increases the sensitivity by two orders of magnitude and extends the dynamic range by three orders of magnitude. Besides, a laser-cavity-molecule locking strategy is proposed to provide additional flexibility of fast gas detection.

physics.app-ph↗

arXiv2021

Mid-infrared homodyne balanced detector for quantum light characterization

We present the characterization of a novel balanced homodyne detector operating in the mid-infrared. The challenging task of revealing non-classicality in mid-infrared light, e.~g. in quantum cascade lasers emission, requires a high-performance detection system. Through the intensity noise power spectral density analysis of the differential signal coming from the incident radiation, we show that our setup is shot-noise limited. We discuss the experimental results with a view to possible applications to quantum technologies, such as free-space quantum communication.

quant-ph↗

arXiv2016

Laser spectroscopy of cold molecules

This paper reviews the recent results in high-resolution spectroscopy on cold molecules. Laser spectroscopy of cold molecules addresses issues of symmetry violation, like in the search for the electric dipole moment of the electron and the studies on energy differences in enantiomers of chiral species; tries to improve the precision to which fundamental physical constants are known and tests for their possible variation in time and space; tests quantum electrodynamics, and searches for a fifth force. Further, we briefly review the recent technological progresses in the fields of cold molecules and mid-infrared lasers, which are the tools that mainly set the limits for the resolution that is currently attainable in the measurements.

physics.atom-ph↗