SearcharxivSearch

arXiv subjects

Stéphane Lagarde

Publications and source records attributed to Stéphane Lagarde.

11 recordsLinked to original sources

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's VLTI has a history of record-breaking discoveries in astrophysics using high-angular resolution instrumentation. Its latest visitor instrument, the Asgard instrumental suite, is one key to further enhance the potential of the facility, particularly in the very near-infrared. It comprises four natively collaborating instruments: HEIMDALLR, a K-band fringe tracker, wavefront corrector and stellar interferometer in K band, with the same optics; Baldr, an H-band Zernike wavefront sensor; BIFROST, an Y-J-H-band photonic combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; and NOTT, an L-band nulling interferometer for imaging young planetary systems. Each of these instruments promise significant advances in their respective science goals that scale with their technical challenges and technology innovations. The integration of Asgard is planned in three phases. The first one (integration, commissioning of HEIMDALLR and Baldr) is successfully done. In this paper, we show an overview of the current progress of the integration of Asgard, the first results of the on-sky commissioning of HEIMDALLR and the future steps and observing policies for Asgard to serve the broader community.

astro-ph.IM

Laboratory characterization of Hierarchical Fringe Tracking

One of the main limitations in long-baseline interferometry lies in its fringe tracking sensitivity. The challenge is therefore to maximize this sensitivity while minimizing the spreading of the signal on the detector. This is the goal at the core of the hierarchical fringe tracking (HFT) concept. We present the laboratory characterization of the $2^{nd}$ generation HFT chips operating in the near infrared (H band) for up to 4 telescopes with more linear phase and group delay estimators, allowing a strong simplification of the tracking algorithm. We show a comparison between theoretical intensity outputs for an optimized phase delay chip, and the laboratory measurements of two chips with different designs. The results do not reach the expectations but get close to them with the 10-outputs chip. Ultimately, this new chip is intended for implementation on the VLTI, CHARA or on the future Xuyi 100m-baseline Stellar Interferometer using three telescopes.

astro-ph.IM

GRAVITY+ adaptive optics (GPAO) tests in Europe

We present in this proceeding the results of the test phase of the GRAVITY+ adaptive optics. This extreme AO will enable both high-dynamic range observations of faint companions (including exoplanets) thanks to a 40x40 sub-apertures wavefront control, and sensitive observations (including AGNs) thanks to the addition of a laser guide star to each UT of the VLT. This leap forward is made thanks to a mostly automated setup of the AO, including calibration of the NCPAs, that we tested in Europe on the UT+atmosphere simulator we built in Nice. We managed to reproduce in laboratory the expected performances of all the modes of the AO, including under non-optimal atmospheric or telescope alignment conditions, giving us the green light to proceed with the Assembly, Integration and Verification phase in Paranal.

astro-ph.IM

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.

astro-ph.IM

CHARA/SPICA: a 6-telescope visible instrument for the CHARA Array

With a possible angular resolution down to 0.1-0.2 millisecond of arc using the 330 m baselines and the access to the 600-900 nm spectral domain, the CHARA Array is ideally configured for focusing on precise and accurate fundamental parameters of stars. CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) aims at performing a large survey of stars all over the Hertzsprung-Russell diagram. This survey will also study the effects of the different kinds of variability and surface structure on the reliability of the extracted fundamental parameters. New surface-brightness-colour relations will be extracted from this survey, for general purposes on distance determination and the characterization of faint stars. SPICA is made of a visible 6T fibered instrument and of a near-infrared fringe sensor. In this paper, we detail the science program and the main characteristics of SPICA-VIS. We present finally the initial performance obtained during the commissioning.

astro-ph.IM

Building a GRAVITY+ Adaptive Optics Test Bench

We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench.

astro-ph.IM

The dusty heart of Circinus: I. Imaging the circumnuclear dust in N-band

Active galactic nuclei play a key role in the evolution of galaxies, but their inner workings and physical connection to the host are poorly understood due to a lack of angular resolution. Infrared interferometry makes it possible to resolve the circumnuclear dust in the nearby Seyfert 2 galaxy, Circinus. Previous observations have revealed complex structures and polar dust emission but interpretation was limited to simple models. MATISSE makes it possible to image these structures for the first time. We observed the Circinus Galaxy with VLTI/MATISSE, producing 150 correlated flux spectra and 100 closure phase spectra. We reconstructed images in the N-band at ~10 mas resolution. We fit blackbody functions with dust extinction to several aperture-extracted fluxes from the images to produce a temperature distribution of central dusty structures. We find significant substructure in the circumnuclear dust: central unresolved flux of ~0.5 Jy, a thin disk 1.9 pc in diameter oriented along ~45 deg,and a ~4x1.5 pc polar emission extending orthogonal to the disk. The polar emission exhibits patchiness, which we attribute to clumpy dust. Flux enhancements to the east and west of the disk are seen for the first time. We distinguish the temperature profiles of the disk and of the polar emission: the disk shows a steep temperature gradient indicative of denser material; the polar profile is flatter, indicating clumpiness and/or lower dust density. The unresolved flux is fitted with a high temperature, ~370 K. The polar dust remains warm (~200 K) out to 1.5 pc from the disk. The recovered morphology and temperature distribution resembles modeling of accretion disks with radiation-driven winds at large scales, but we placed new constraints on the subparsec dust. The subparsec features imaged here place new constraints on the physical modeling of circumnuclear dust in active galaxies.

astro-ph.GA

Compensation of differential dispersion: application to multiband stellar interferometry

With the aim of pushing the limiting magnitude of interferometric instruments, the need for wide-band detection channels and for a coordinated operation of different instruments has considerably grown in the field of long-baseline interferometry. For this reason, the Center for High Angular Resolution Astronomy (CHARA), an array of six telescopes, requires a new configuration of longitudinal dispersion compensators to keep the fringe contrast above 95 per cent simultaneously in all spectral bands, while preserving the transmission above 85 per cent. In this paper, we propose a new method for defining the longitudinal dispersion compensators (LDC) suited for multiband observations. A literal approximation of the contrast loss resulting from the dispersion residues enables us to define a general criterion for fringe contrast maximization on several bands simultaneously. The optimization of this criterion leads to a simple solution with only two LDC stages per arm and existing differential delay lines, to the glass choice and a simple linear formula for thickness control of all these media. A refined criterion can also take into account glass transmission. After presenting this criterion, we give the optimal solution (medium, configuration) and its expected performance for the planned observing modes on CHARA.

astro-ph.IM

VLTI/AMBER differential interferometry of the broad-line region of the quasar 3C273

Unveiling the structure of the Broad Line Region (BLR) of AGNs is critical to understand the quasar phenomenon. Resolving a few BLRs by optical interferometry will bring decisive information to confront, complement and calibrate the reverberation mapping technique, basis of the mass-luminosity relation in quasars. BLRs are much smaller than the angular resolution of the VLT and Keck interferometers and they can be resolved only by differential interferometry very accurate measurements of differential visibility and phase as a function of wavelength. The latter yields the photocenter variation with wavelength, and constrains the size, position and velocity law of various regions of the BLR. AGNs are below the magnitude limit for spectrally resolved interferometry set by currently available fringe trackers. A new "blind" observation method and a data processing based on the accumulation of 2D Fourier power and cross spectra permitted us to obtain the first spectrally resolved interferometric observation of a BLR, on the K=10 quasar 3C273. A careful bias analysis is still in progress, but we report strong evidence that, as the baseline increases, the differential visibility decreases in the Pa-alpha line. Combined with a differential phase smaller than 3 degree, this yields an angular equivalent radius of the BLR larger than 0.4 milliarcseconds, or 1000 light days at the distance of 3C273, much larger than the reverberation mapping radius of 300 light days. Explaining the coexistence of these two different sizes, and possibly structures and mechanisms, implies very new insights into the BLR of 3C273

astro-ph.GA

DISCO: a Spatio-Spectral Recombiner for Pupil Remapping Interferometry

Pupil-remapping is a new high-dynamic range imaging technique that has recently demonstrated feasibility on sky. The current prototypes present however deceiving limiting magnitude, restricting the current use to the brightest stars in the sky. We propose to combine pupil-remapping with spatio-spectral encoding, a technique first applied to the VEGA/CHARA interferometer. The result is an instrument proposal, called "Dividing Interferometer for Stars Characterizations and Observations" (DISCO). The idea is to take profit of wavelength multiplexing when using a spectrograph in order to pack as much as possible the available information, yet providing a potential boost of 1.5 magnitude if used in existing prototypes. We detail in this paper the potential of such a concept.

astro-ph.IM

Parasitic Interference in Long Baseline Optical Interferometry: Requirements for Hot Jupiter-like Planet Detection

The observable quantities in optical interferometry, which are the modulus and the phase of the complex visibility, may be corrupted by parasitic fringes superimposed on the genuine fringe pattern. These fringes are due to an interference phenomenon occurring from straylight effects inside an interferometric instrument. We developed an analytical approach to better understand this phenomenon when straylight causes crosstalk between beams. We deduced that the parasitic interference significantly affects the interferometric phase and thus the associated observables including the differential phase and the closure phase. The amount of parasitic flux coupled to the piston between beams appears to be very influential in this degradation. For instance, considering a point-like source and a piston ranging from $λ/500$ to $λ/5$ in L band ($λ=3.5\:μ$m), a parasitic flux of about 1\% of the total flux produces a parasitic phase reaching at most one third of the intrinsic phase. The piston, which can have different origins (instrumental stability, atmospheric perturbations, ...), thus amplifies the effect of parasitic interference. According to specifications of piston correction in space or at ground level (respectively $λ/500\approx 2$nm and $λ/30\approx 100$nm), the detection of hot Jupiter-like planets, one of the most challenging aims for current ground-based interferometers, limits parasitic radiation to about 5\% of the incident intensity. This was evaluated by considering different types of hot Jupiter synthetic spectra. Otherwise, if no fringe tracking is used, the detection of a typical hot Jupiter-like system with a solar-like star would admit a maximum level of parasitic intensity of 0.01\% for piston errors equal to $λ$/15. If the fringe tracking specifications are not precisely observed, it thus appears that the allowed level of parasitic intensity dramatically decreases and may prevent the detection. In parallel, the calibration of the parasitic phase by a reference star, at this accuracy level, seems very difficult. Moreover, since parasitic phase is an object-dependent quantity, the use of a hypothetical phase abacus, directly giving the parasitic phase from a given parasitic flux level, is also impossible. Some instrumental solutions, implemented at the instrument design stage for limiting or preventing this parasitic interference, appears to be crucial and are presented in this paper.

astro-ph.IM