arXiv subjects

Stefano Frabboni

Publications and source records attributed to Stefano Frabboni.

17 recordsLinked to original sources

arXiv2026

Quantum tomography of inelastic electron scattering \emph{via} orbital angular momentum states

The physical properties of a quantum system, whether pure or mixed, are described fully by its density matrix. Recovery of the density matrix through projective measurements -- referred to as quantum state tomography -- is a cornerstone of quantum optics and metrology. The implementation of this approach in transmission electron microscopy, in particular for the characterisation of an electron beam after inelastic scattering, has remained a longstanding challenge as a result of the complexity of scanning high-dimensional phase spaces, with the number of required measurements growing quadratically with space dimensionality. Here, we introduce a simplified approach by restricting tomography to the electron orbital angular momentum (OAM) subspace. By using an electron optical device known as an OAM sorter, we discretise the phase space into a finite set of measurable states, thus significantly reducing the experimental and computational burden. The resulting measurements suffice to probe essential features of inelastic scattering. We demonstrate the technique by studying the inelastic scattering of a structured electron probe exciting volume plasmons in a carbon film. The combined use of a structured beams and OAM-resolved quantum tomography reveals symmetry-breaking effects and offers insight into the coherence and evolution of the scattered quantum states. Analysis of the diagonalised density matrices further reveals the nature of the induced state transitions, demonstrating the power of the approach for quantum tomography of electron scattering.

quant-ph↗

arXiv2026

Designing electrostatic MEMS-based electron optics: the case of the spiral phase plate

A new generation of microfabricated MEMS for electron optics is changing electron microscopy for the better. These devices allow operations on the electron beam that are impossible with conventional electron optics. Unprecedented phase landscapes like tunable spiral phase plates and localized strong phase gradients are just some examples of what can be achieved. This work establishes the methodological foundation to design and control MEMS based phase plates. The design strategy is rooted on a novel analytical and numerical modeling of thin electrodes with accurate account of the fringing fields having a major role in the thin-MEMS geometry. We designed, fabricated and characterized experimentally a spiral phase plate, and assessed the quality of the generated vortex beam while discussing the most relevant control parameters and design approaches.

physics.ins-det↗

arXiv2022

Computational ghost imaging for transmission electron microscopy

While transmission electron microscopes (TEM) can achieve a much higher resolution than optical microscopes, they face challenges of damage to samples during the high energy processes involved. Here, we explore using computational ghost imaging techniques in electron microscopy to reduce the total required intensity. The technological lack of the equivalent high-resolution, optical spatial light modulator for electrons means that a different approach needs to be pursued. To this end, we show a beam shaping technique based on the use of a distribution of electrically charged metal needles to structure the beam, alongside a novel reconstruction method to handle the resulting highly non-orthogonal patterns. Second, we illustrate the application of this ghost imaging approach in electron microscopy. To test the full extent of the capabilities of this technique, we realised an analogous optical setup method. In both regimes, the ability to reduce the amount of total illumination intensity is evident in comparison to raster scanning.

physics.optics↗

arXiv2021

Theoretical and practical aspects of the design and production of synthetic holograms for transmission electron microscopy

Beam shaping - the ability to engineer the phase and the amplitude of massive and massless particles - has long interested scientists working on communication, imaging and the foundations of quantum mechanics. In light optics, the shaping of electromagnetic waves (photons) can be achieved using techniques that include, but are not limited to, direct manipulation of the beam source (as in X-ray Free Electron Lasers (XFELs) and Synchrotrons), deformable mirrors, spatial light modulators, mode converters and holograms. The recent introduction of holographic masks for electrons provides new possibilities for electron beam shaping. Their fabrication has been made possible by advances in micrometric and nanometric device production using lithography and focused ion beam patterning. This article provides a tutorial on the generation, production and analysis of synthetic holograms for transmission electron microscopy. It begins with an introduction to synthetic holograms, outlining why they are useful for beam shaping to study material properties. It then focuses on the fabrication of the required devices from theoretical and experimental perspectives, with examples taken from both simulations and experimental results. Applications of synthetic electron holograms as aberration correctors, electron vortex generators and spatial mode sorters are then presented.

physics.optics↗

arXiv2020

Focused Ion Beam fabrication of Janus bimetallic cylinders acting as drift~tube Zernike phase plates

Modern nanotechnology techniques offer new opportunities for fabricating structures and devices at the micron and sub-micron level. Here, we use focused ion beam techniques to realize drift tube Zernike phase plates for electrons, whose operation is based on the presence of contact potentials in Janus bimetallic cylinders, in a similar manner to the electrostatic Aharonov-Bohm effect in bimetallic wires. We use electron Fraunhofer interference to demonstrate that such bimetallic pillar structures introduce phase shifts that can be tuned to desired values by varying their dimensions, in particular their heights.

physics.ins-det↗

arXiv2020

Orbital angular momentum and energy loss characterization of plasmonic excitations in metallic nanostructures in TEM

Recently, a new device to measure the Orbital Angular Momentum (OAM) electronic spectrum after elastic/inelastic scattering in a transmission electron microscope has been introduced. We modified the theoretical framework needed to describe conventional low loss electron energy loss spectroscopy (EELS) experiments in transmission electron microscopes (TEM) to study surface plasmons in metallic nanostructures, to allow for an OAM post selection and devise new experiments for the analysis of these excitations in nanostructures. We found that unprecedented information on the symmetries and on the chirality of the plasmonic modes can be retrieved even with limited OAM and energy resolutions.

physics.ins-det↗

arXiv2020

Orbital-angular-momentum-resolved electron magnetic chiral dichroism

We propose a highly efficient atomically-resolved mode of electron magnetic chiral dichroism. This method exploits the recently introduced orbital angular momentum spectrometer to analyze the inelastically scattered electrons allowing for simultaneous dispersion in both energy and angular momentum. The technique offers several advantages over previous formulations of electron magnetic chiral dichroism as it requires much simpler experimental conditions in terms of specimen orientation and thickness. A novel simulation algorithm, based on the multislice description of the beam propagation, is used to anticipate the advantages of the new approach over current electron magnetic chiral dichroism implementations. Numerical calculations confirm an increased magnetic signal to noise ratio with in plane atomic resolution.

cond-mat.mtrl-sci↗

arXiv2020

Efficient molecule discrimination in electron microcopy through an optimized orbital angular momentum sorter

We consider the problem of discriminating macromolecular structures in an electron microscope, through a specific beam shaping technique. Our approach is based on maximizing the which-molecule information extracted from the state of each electron. To this aim, the optimal observables are derived within the framework of quantum state discrimination, which allows one to fully account from the quantum character of the probe. We simulate the implementation of such optimal observable on a generalized orbital angular momentum (OAM) sorter and benchmark its performance against the best known real space approach.

quant-ph↗

arXiv2019

Sum rules in zone axis STEM-orbital angular momentum resolved electron magnetic chiral dichroism

In this work we derive sum rules for orbital angular momentum(OAM) resolved electron magnetic chiral dichroism (EMCD) which enable the evaluation of the strength of spin and orbital components of the atomic magnetic moments in a crystalline sample. We also demonstrate through numerical simulations that these rules appear to be only slightly dependent from the dynamical diffraction of the electron beam in the sample, making possible their application without the need of additional dynamical diffraction calculations.

cond-mat.mtrl-sci↗

arXiv2019

Experimental demonstration of an electrostatic orbital angular momentum sorter for electrons

We report the first experimental demonstration of an electrostatic electron orbital angular momentum (OAM) sorter, which can be used to analyze the OAM states of electrons in a transmission electron microscope. We verify the sorter functionality for several electron beams possessing different superpositions of OAM states, and use it to record the electron beams OAM spectra. Our current electrostatic OAM sorter has an OAM resolution of 2 in the units of h/bar - the reduced Planck constant. It is expected to increase the OAM resolution of the sorter to the optimal resolution of 1 in the future via fine control of the sorting phase elements.

physics.ins-det↗

arXiv2017

Towards a holographic approach to spherical aberration correction in scanning transmission electron microscopy

Recent progress in phase modulation using nanofabricated electron holograms has demonstrated how the phase of an electron beam can be controlled. In this paper, we apply this concept to the correction of spherical aberration in a scanning transmission electron microscope and demonstrate an improvement in spatial resolution. Such a holographic approach to spherical aberration correction is advantageous for its simplicity and cost-effectiveness.

physics.ins-det↗

arXiv2017

Phase retrieval of an electron vortex beam using diffraction holography

In both light optics and electron optics, the amplitude of a wave scattered by an object is an observable that is usually recorded in the form of an intensity distribution in a real space image or a diffraction image. In contrast, retrieval of the phase of a scattered wave is a well-known challenge, which is usually approached by interferometric or numerical methods. In electron microscopy, as a result of constraints in the lens setup, it is particularly difficult to retrieve the phase of a diffraction image. Here, we use a defocused beam generated by a nanofabricated hologram to form a reference wave that can be interfered with a diffracted beam. This setup provides an extended interference region with the sample wavefunction in the Fraunhofer plane. As a case study, we retrieve the phase of an electron vortex beam. Beyond this specific example, the approach can be used to retrieve the wavefronts of diffracted beams from a wide range of samples.

physics.optics↗

arXiv2017

Nondestructive Measurement of Orbital Angular Momentum for an Electron Beam

Free electrons with a helical phase front, referred to as "twisted" electrons, possess an orbital angular momentum (OAM) and, hence, a quantized magnetic dipole moment along their propagation direction. This intrinsic magnetic moment can be used to probe material properties. Twisted electrons thus have numerous potential applications in materials science. Measuring this quantity often relies on a series of projective measurements that subsequently change the OAM carried by the electrons. In this Letter, we propose a nondestructive way of measuring an electron beam's OAM through the interaction of this associated magnetic dipole with a conductive loop. Such an interaction results in the generation of induced currents within the loop, which are found to be directly proportional to the electron's OAM value. Moreover, the electron experiences no OAM variations and only minimal energy losses upon the measurement, and, hence, the nondestructive nature of the proposed technique.

quant-ph↗

arXiv2016

Measuring an electron beam's orbital angular momentum spectrum

Quantum complementarity states that particles, e.g. electrons, can exhibit wave-like properties such as diffraction and interference upon propagation. \textit{Electron waves} defined by a helical wavefront are referred to as twisted electrons~\cite{uchida:10,verbeeck:10,mcmorran:11}. These electrons are also characterised by a quantized and unbounded magnetic dipole moment parallel to their propagation direction, as they possess a net charge of $-|e|$~\cite{bliokh:07}. When interacting with magnetic materials, the wavefunctions of twisted electrons are inherently modified~\cite{lloyd:12b,schattschneider:14a,asenjo:14}. Such variations therefore motivate the need to analyze electron wavefunctions, especially their wavefronts, in order to obtain information regarding the material's structure~\cite{harris:15}. Here, we propose, design, and demonstrate the performance of a device for measuring an electron's azimuthal wavefunction, i.e. its orbital angular momentum (OAM) content. Our device consists of nanoscale holograms designed to introduce astigmatism onto the electron wavefunctions and spatially separate its phase components. We sort pure and superposition OAM states of electrons ranging within OAM values of $-10$ and $10$. We employ the device to analyze the OAM spectrum of electrons having been affected by a micron-scale magnetic dipole, thus establishing that, with a midfield optical configuration, our sorter can be an instrument for nano-scale magnetic spectroscopy.

quant-ph↗

arXiv2015

Generation and Application of Bessel Beams in Electron Microscopy

We report a systematic treatment of the holographic generation of electron Bessel beams, with a view to applications in electron microscopy. We describe in detail the theory underlying hologram patterning, as well as the actual electro-optical configuration used experimentally. We show that by optimizing our nanofabrication recipe, electron Bessel beams can be generated with efficiencies reaching $37 \pm 3\%$. We also demonstrate by tuning various hologram parameters that electron Bessel beams can be produced with many visible rings, making them ideal for interferometric applications, or in more highly localized forms with fewer rings, more suitable for imaging. We describe the settings required to tune beam localization in this way, and explore beam and hologram configurations that allow the convergences and topological charges of electron Bessel beams to be controlled. We also characterize the phase structure of the Bessel beams generated with our technique, using a simulation procedure that accounts for imperfections in the hologram manufacturing process. Finally, we discuss a specific potential application of electron Bessel beams in scanning transmission electron microscopy.

quant-ph↗

arXiv2014

Holographic generation of highly twisted electron beams

Free electrons can possess an intrinsic orbital angular momentum, similar to those in an electron cloud, upon free-space propagation. The wavefront corresponding to the electron's wavefunction forms a helical structure with a number of twists given by the \emph{angular speed}. Beams with a high number of twists are of particular interest because they carry a high magnetic moment about the propagation axis. Among several different techniques, electron holography seems to be a promising approach to shape a \emph{conventional} electron beam into a helical form with large values of angular momentum. Here, we propose and manufacture a nano-fabricated phase hologram for generating a beam of this kind with an orbital angular momentum up to 200$\hbar$. Based on a novel technique the value of orbital angular momentum of the generated beam are measured, then compared with simulations. Our work, apart from the technological achievements, may lead to a way of generating electron beams with a high quanta of magnetic moment along the propagation direction, and thus may be used in the study of the magnetic properties of materials and for manipulating nano-particles.

quant-ph↗

arXiv2014

Convergent beam electron-diffraction investigation of lattice mismatch and static disorder in GaAs/GaAs1-xNx intercalated GaAs/GaAs1-xNx:H heterostructures

Hydrogen incorporation in diluted nitride semiconductors dramatically modifies the electronic and structural properties of the crystal through the creation of nitrogen-hydrogen complexes. We report a convergent beam electron-diffraction characterization of diluted nitride semiconductor-heterostructures patterned at a sub-micron scale and selectively exposed to hydrogen. We present a method to determine separately perpendicular mismatch and static disorder in pristine and hydrogenated heterostructures. The roles of chemical composition and strain on static disorder have been separately assessed.

cond-mat.mtrl-sci↗