Searcharxiv⌕ Search

arXiv subjects

Steph Sallum

Publications and source records attributed to Steph Sallum.

At least 37 records · Page 2Linked to original sources

On the Potential of Spectroastrometry with Photonic Lanterns

We investigate the potential of photonic lantern (PL) fiber fed spectrometers for two-dimensional spectroastrometry. Spectroastrometry, a technique for studying small angular scales by measuring centroid shifts as a function of wavelength, is typically conducted using long-slit spectrographs. However, slit-based spectroastrometry requires observations with multiple position angles to measure two-dimensional spectroastrometric signals. In a typical configuration of PL-fed spectrometers, light from the focal plane is coupled into the few-moded PL, which is then split into several single-mode outputs, with the relative intensities containing astrometric information. The single-moded beams can be fed into a high-resolution spectrometer to measure wavelength-dependent centroid shifts. We perform numerical simulations of a standard 6-port PL and demonstrate its capability of measuring spectroastrometric signals. The effects of photon noise, wavefront errors, and chromaticity are investigated. When the PL is designed to have large linear responses to tip-tilts at the wavelengths of interest, the centroid shifts can be efficiently measured. Furthermore, we provide mock observations of detecting accreting protoplanets. PL spectroastrometry is potentially a simple and efficient technique for detecting spectroastrometric signals.

astro-ph.IM↗

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

A Photonic Lantern (PL) is a novel device that efficiently converts a multi-mode fiber into several single-mode fibers. When coupled with an extreme adaptive optics (ExAO) system and a spectrograph, PLs enable high throughput spectroscopy at high angular resolution. The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system of the Subaru Telescope recently acquired a PL that converts its multi-mode input into 19 single-mode outputs. The single mode outputs feed a R~4,000 spectrograph optimized for the 600 to 760 nm wavelength range. We present here the integration of the PL on SCExAO, and study the device performance in terms of throughput, field of view, and spectral reconstruction. We also present the first on-sky demonstration of a Visible PL coupled with an ExAO system, showing a significant improvement of x12 in throughput compared to the use of a sole single-mode fiber. This work paves the way towards future high throughput photonics instrumentation at small angular resolution.

astro-ph.IM↗

Searching for Protoplanets around MWC 758 and MWC 480 in Br-$γ$ using Kernel Phase and SCExAO/CHARIS

Discovering new actively-accreting protoplanets is crucial to answering open questions about planet formation. However, identifying such planets at orbital distances where they are expected to be abundant is extremely challenging, both due to the technical requirements and large distances to star-forming regions. Here we use the kernel phase interferometry (KPI) technique to search for companions around the $\sim$6 and $\sim$8 Myr old Herbig Ae stars MWC 758 and MWC 480. KPI is a data analysis technique which is sensitive to moderate asymmetries, arising from eg. a circumstellar disk or companions with contrasts of up to 6-8 mags, at separations down to and even below the classical Rayleigh diffraction limit ($\sim 1.2λ/ D$). Using the high spectral resolution K-band mode of the SCExAO/CHARIS integral field spectrograph, we search for both excess Br-$γ$ line emission and continuum emission from companions around MWC 480 and MWC 758. We are able to set limits on the presence of rapidly accreting protoplanets and brown dwarfs between 4 and 16 au, well interior to those of previous studies. In Br-$γ$, we set limits on excess line emission equivalent to accretion rates ranging from $10^{-5} M_{j}^{2}.yr^{-1}$ to $10^{-6}M_{j}^{2}.yr^{-1}$. Our achievable contrasts demonstrate that KPI using SCExAO/CHARIS is a promising technique to search for giant accreting protoplanets at smaller separations compared to conventional imaging.

astro-ph.EP↗

Laboratory demonstration of a Photonic Lantern Nuller in monochromatic and broadband light

Photonic lantern nulling (PLN) is a method for enabling the detection and characterization of close-in exoplanets by exploiting the symmetries of the ports of a mode-selective photonic lantern (MSPL) to cancel out starlight. A six-port MSPL provides four ports where on-axis starlight is suppressed, while off-axis planet light is coupled with efficiencies that vary as a function of the planet's spatial position. We characterize the properties of a six-port MSPL in the laboratory and perform the first testbed demonstration of the PLN in monochromatic light (1569 nm) and in broadband light (1450 nm to 1625 nm), each using two orthogonal polarizations. We compare the measured spatial throughput maps with those predicted by simulations using the lantern's modes. We find that the morphologies of the measured throughput maps are reproduced by the simulations, though the real lantern is lossy and has lower throughputs overall. The measured ratios of on-axis stellar leakage to peak off-axis throughput are around 10^(-2), likely limited by testbed wavefront errors. These null-depths are already sufficient for observing young gas giants at the diffraction limit using ground-based observatories. Future work includes using wavefront control to further improve the nulls, as well as testing and validating the PLN on-sky.

astro-ph.IM↗

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems IV: NIRISS Aperture Masking Interferometry Performance and Lessons Learned

We present a performance analysis for the aperture masking interferometry (AMI) mode on board the James Webb Space Telescope Near Infrared Imager and Slitless Spectrograph (JWST/NIRISS). Thanks to self-calibrating observables, AMI accesses inner working angles down to and even within the classical diffraction limit. The scientific potential of this mode has recently been demonstrated by the Early Release Science (ERS) 1386 program with a deep search for close-in companions in the HIP 65426 exoplanetary system. As part of ERS 1386, we use the same data set to explore the random, static, and calibration errors of NIRISS AMI observables. We compare the observed noise properties and achievable contrast to theoretical predictions. We explore possible sources of calibration errors and show that differences in charge migration between the observations of HIP 65426 and point-spread function calibration stars can account for the achieved contrast curves. Lastly, we use self-calibration tests to demonstrate that with adequate calibration NIRISS F380M AMI can reach contrast levels of $\sim9-10$ mag at $\gtrsim λ/D$. These tests lead us to observation planning recommendations and strongly motivate future studies aimed at producing sophisticated calibration strategies taking these systematic effects into account. This will unlock the unprecedented capabilities of JWST/NIRISS AMI, with sensitivity to significantly colder, lower-mass exoplanets than lower-contrast ground-based AMI setups, at orbital separations inaccessible to JWST coronagraphy.

astro-ph.EP↗

Coherent Imaging with Photonic Lanterns

Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pupil, analogous to subapertures in aperture masking interferometry (AMI). Coherent imaging with PLs can be enabled by interfering SMF outputs and applying phase modulation, which can be achieved using a photonic chip beam combiner at the backend (e.g., the ABCD beam combiner). In this study, we investigate the potential of coherent imaging by interfering SMF outputs of a PL with a single telescope. We demonstrate that the visibilities that can be measured from a PL are mutual intensities incident on the pupil weighted by the cross-correlation of a pair of lantern modes. From numerically simulated lantern principal modes of a 6-port PL, we find that interferometric observables using a PL behave similarly to separated-aperture visibilities for simple models on small angular scales ($<λ/D$) but with greater sensitivity to symmetries and capability to break phase angle degeneracies. Furthermore, we present simulated observations with wavefront errors and compare them to AMI. Despite the redundancy caused by extended lantern principal modes, spatial filtering offers stability to wavefront errors. Our simulated observations suggest that PLs may offer significant benefits in the photon noise-limited regime and in resolving small angular scales at low contrast regime.

astro-ph.IM↗

Real-time experimental demonstrations of a photonic lantern wavefront sensor

The direct imaging of an Earth-like exoplanet will require sub-nanometric wavefront control across large light-collecting apertures, to reject host starlight and detect the faint planetary signal. Current adaptive optics (AO) systems, which use wavefront sensors that reimage the telescope pupil, face two challenges that prevent this level of control: non-common-path aberrations (NCPAs), caused by differences between the sensing and science arms of the instrument; and petaling modes: discontinuous phase aberrations caused by pupil fragmentation, especially relevant for the upcoming 30-m class telescopes. Such aberrations drastically impact the capabilities of high-contrast instruments. To address these issues, we can add a second-stage wavefront sensor to the science focal plane. One promising architecture uses the photonic lantern (PL): a waveguide that efficiently couples aberrated light into single-mode fibers (SMFs). In turn, SMF-confined light can be stably injected into high-resolution spectrographs, enabling direct exoplanet characterization and precision radial velocity measurements; simultaneously, the PL can be used for focal-plane wavefront sensing. We present a real-time experimental demonstration of the PL wavefront sensor on the Subaru/SCExAO testbed. Our system is stable out to around ~400 nm of low-order Zernike wavefront error, and can correct petaling modes. When injecting ~30 nm RMS of low order time-varying error, we achieve ~10x rejection at 1 s timescales; further refinements to the control law and lantern fabrication process should make sub-nanometric wavefront control possible. In the future, novel sensors like the PLWFS may prove to be critical in resolving the wavefront control challenges posed by exoplanet direct imaging.

astro-ph.IM↗

Spectroastrometry and Imaging Science with Photonic Lanterns on Extremely Large Telescopes

Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs or photonic chip beam combiners. For instance, by using relative intensities in the output cores as a function of wavelength, PLs can enable spectroastrometry. In addition, by interfering beams in the output cores with a beam combiner in the backend, PLs can be used for high-throughput interferometric imaging. When used on an Extremely Large Telescope (ELT), with its increased sensitivity and angular resolution, the imaging and spectroastrometric capabilities of PLs will be extended to higher contrast and smaller angular scales. We study the potential spectroastrometry and imaging science cases of PLs on ELTs, including study of exomoons, broad-line regions of quasars, and inner circumstellar disks.

astro-ph.IM↗

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

Recovering simulated planet and disk signals using SCALES aperture masking

The Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument is a lenslet-based integral field spectrograph that will operate at 2 to 5 microns, imaging and characterizing colder (and thus older) planets than current high-contrast instruments. Its spatial resolution for distant science targets and/or close-in disks and companions could be improved via interferometric techniques such as sparse aperture masking. We introduce a nascent Python package, NRM-artist, that we use to design several SCALES masks to be non-redundant and to have uniform coverage in Fourier space. We generate high-fidelity mock SCALES data using the scalessim package for SCALES' low spectral resolution modes across its 2 to 5 micron bandpass. We include realistic noise from astrophysical and instrument sources, including Keck adaptive optics and Poisson noise. We inject planet and disk signals into the mock datasets and subsequently recover them to test the performance of SCALES sparse aperture masking and to determine the sensitivity of various mask designs to different science signals.

astro-ph.IM↗

Characterization of diamond-turned optics for SCALES

High-contrast imaging has been used to discover and characterize dozens of exoplanets to date. The primary limiting performance factor for these instruments is contrast, the ratio of exoplanet to host star brightness that an instrument can successfully resolve. Contrast is largely determined by wavefront error, consisting of uncorrected atmospheric turbulence and optical aberrations downstream of AO correction. Single-point diamond turning allows for high-precision optics to be manufactured for use in astronomical instrumentation, presenting a cheaper and more versatile alternative to conventional glass polishing. This work presents measurements of wavefront error for diamond-turned aluminum optics in the Slicer Combined with an Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument, a 2-5 micron coronagraphic integral field spectrograph under construction for Keck Observatory. Wavefront error measurements for these optics are used to simulate SCALES' point spread function using physical optics propagation software poppy, showing that SCALES' contrast performance is not limited by wavefront error from internal instrument optics.

astro-ph.IM↗

High Angular Resolution Imaging of the V892 Tau Binary System: A New Circumprimary Disk Detection and Updated Orbital Constraints

We present a direct imaging study of V892 Tau, a young Herbig Ae/Be star with a close-in stellar companion and circumbinary disk. Our observations consist of images acquired via Keck 2/NIRC2 with non-redundant masking and the pyramid wavefront sensor at K$^\prime$ band (2.12$μ$m) and L$^\prime$ band (3.78$μ$m). Sensitivity to low-mass accreting companions and cool disk material is high at L$^\prime$ band, while complimentary observations at K$^\prime$ band probe hotter material with higher angular resolution. These multi-wavelength, multi-epoch data allow us to differentiate the secondary stellar emission from disk emission and deeply probe the structure of the circumbinary disk at small angular separations. We constrain architectural properties of the system by fitting geometric disk and companion models to the K$^\prime$ and L$^\prime$ band data. From these models, we constrain the astrometric and photometric properties of the stellar binary and update the orbit, placing the tightest estimates to date on the V892 Tau orbital parameters. We also constrain the geometric structure of the circumbinary disk, and resolve a circumprimary disk for the first time.

astro-ph.SR↗

The Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES): driving science cases and expected outcomes

The Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES) is a $2-5~μ$m, high-contrast integral field spectrograph (IFS) currently being built for Keck Observatory. With both low ($R\lesssim250$) and medium ($R\sim3500-7000$) spectral resolution IFS modes, SCALES will detect and characterize significantly colder exoplanets than those accessible with near-infrared ($\sim1-2~μ$m) high-contrast spectrographs. This will lead to new progress in exoplanet atmospheric studies, including detailed characterization of benchmark systems that will advance the state of the art of atmospheric modeling. SCALES' unique modes, while designed specifically for direct exoplanet characterization, will enable a broader range of novel (exo)planetary observations as well as galactic and extragalactic studies. Here we present the science cases that drive the design of SCALES. We describe an end-to-end instrument simulator that we use to track requirements, and show simulations of expected science yields for each driving science case. We conclude with a discussion of preparations for early science when the instrument sees first light in $\sim2025$.

astro-ph.IM↗

The path to detecting extraterrestrial life with astrophotonics

Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a gaping void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life.

astro-ph.IM↗

Photonic spectro-interferometry with SCExAO/FIRST at the Subaru Telescope: towards H-alpha imaging of protoplanets

FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solution for enabling exoplanet detection and characterization in the future. We present the latest on-sky results along with recent upgrades, including the integration and on-sky test of a new spectrograph (R~3,600) optimized for the detection of H-alpha emission from young exoplanets accreting matter.

astro-ph.IM↗

Systematic Multi-Epoch Monitoring of LkCa 15: Dynamic Dust Structures on Solar-System Scales

We present the highest angular resolution infrared monitoring of LkCa 15, a young solar analog hosting a transition disk. This system has been the subject of a number of direct imaging studies from the millimeter through the optical, which have revealed multiple protoplanetary disk rings as well as three orbiting protoplanet candidates detected in infrared continuum (one of which was simultaneously seen at H$α$). We use high-angular-resolution infrared imaging from 2014-2020 to systematically monitor these infrared signals and determine their physical origin. We find that three self-luminous protoplanets cannot explain the positional evolution of the infrared sources, since the longer time baseline images lack the coherent orbital motion that would be expected for companions. However, the data still strongly prefer a time-variable morphology that cannot be reproduced by static scattered-light disk models. The multi-epoch observations suggest the presence of complex and dynamic substructures moving through the forward-scattering side of the disk at $\sim20$ AU, or quickly-varying shadowing by closer-in material. We explore whether the previous H$α$ detection of one candidate would be inconsistent with this scenario, and in the process develop an analytical signal-to-noise penalty for H$α$ excesses detected near forward-scattered light. Under these new noise considerations, the H$α$ detection is not strongly inconsistent with forward scattering, making the dynamic LkCa 15 disk a natural explanation for both the infrared and H$α$ data.

astro-ph.EP↗

Spectrally dispersed kernel phase interferometry with SCExAO/CHARIS: proof of concept and calibration strategies

Kernel phase interferometry (KPI) is a data processing technique that allows for the detection of asymmetries (such as companions or disks) in high-Strehl images, close to and within the classical diffraction limit. We show that KPI can successfully be applied to hyperspectral image cubes generated from integral field spectrographs (IFSs). We demonstrate this technique of spectrally-dispersed kernel phase by recovering a known binary with the SCExAO/CHARIS IFS in high-resolution K-band mode. We also explore a spectral differential imaging (SDI) calibration strategy that takes advantage of the information available in images from multiple wavelength bins. Such calibrations have the potential to mitigate high-order, residual systematic kernel phase errors, which currently limit the achievable contrast of KPI. The SDI calibration presented here is applicable to searches for line emission or sharp absorption features, and is a promising avenue toward achieving photon-noise-limited kernel phase observations. The high angular resolution and spectral coverage provided by dispersed kernel phase offers novel opportunities for science observations which would have been challenging to achieve otherwise.

astro-ph.IM↗

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems I: High Contrast Imaging of the Exoplanet HIP 65426 b from 2-16 $μ$m

We present JWST Early Release Science (ERS) coronagraphic observations of the super-Jupiter exoplanet, HIP 65426 b, with the Near-Infrared Camera (NIRCam) from 2-5 $μ$m, and with the Mid-Infrared Instrument (MIRI) from 11-16 $μ$m. At a separation of $\sim$0.82" (86$^{+116}_{-31}$ au), HIP 65426 b is clearly detected in all seven of our observational filters, representing the first images of an exoplanet to be obtained by JWST, and the first ever direct detection of an exoplanet beyond 5 $μ$m. These observations demonstrate that JWST is exceeding its nominal predicted performance by up to a factor of 10, depending on separation and subtraction method, with measured 5$σ$ contrast limits of $\sim$1$\times10^{-5}$ and $\sim$2$\times10^{-4}$ at 1" for NIRCam at 4.4 $μ$m and MIRI at 11.3 $μ$m, respectively. These contrast limits provide sensitivity to sub-Jupiter companions with masses as low as 0.3$M_\mathrm{Jup}$ beyond separations of $\sim$100 au. Together with existing ground-based near-infrared data, the JWST photometry are well fit by a BT-SETTL atmospheric model from 1-16 $μ$m, and span $\sim$97% of HIP 65426 b's luminous range. Independent of the choice of model atmosphere we measure an empirical bolometric luminosity that is tightly constrained between $\mathrm{log}\!\left(L_\mathrm{bol}/L_{\odot}\right)$=-4.31 to $-$4.14, which in turn provides a robust mass constraint of 7.1$\pm$1.2 $M_\mathrm{Jup}$. In totality, these observations confirm that JWST presents a powerful and exciting opportunity to characterise the population of exoplanets amenable to high-contrast imaging in greater detail.

astro-ph.EP↗